Download or read book Polymer Science A Comprehensive Reference written by and published by Newnes. This book was released on 2012-12-05 with total page 7752 pages. Available in PDF, EPUB and Kindle. Book excerpt: The progress in polymer science is revealed in the chapters of Polymer Science: A Comprehensive Reference, Ten Volume Set. In Volume 1, this is reflected in the improved understanding of the properties of polymers in solution, in bulk and in confined situations such as in thin films. Volume 2 addresses new characterization techniques, such as high resolution optical microscopy, scanning probe microscopy and other procedures for surface and interface characterization. Volume 3 presents the great progress achieved in precise synthetic polymerization techniques for vinyl monomers to control macromolecular architecture: the development of metallocene and post-metallocene catalysis for olefin polymerization, new ionic polymerization procedures, and atom transfer radical polymerization, nitroxide mediated polymerization, and reversible addition-fragmentation chain transfer systems as the most often used controlled/living radical polymerization methods. Volume 4 is devoted to kinetics, mechanisms and applications of ring opening polymerization of heterocyclic monomers and cycloolefins (ROMP), as well as to various less common polymerization techniques. Polycondensation and non-chain polymerizations, including dendrimer synthesis and various "click" procedures, are covered in Volume 5. Volume 6 focuses on several aspects of controlled macromolecular architectures and soft nano-objects including hybrids and bioconjugates. Many of the achievements would have not been possible without new characterization techniques like AFM that allowed direct imaging of single molecules and nano-objects with a precision available only recently. An entirely new aspect in polymer science is based on the combination of bottom-up methods such as polymer synthesis and molecularly programmed self-assembly with top-down structuring such as lithography and surface templating, as presented in Volume 7. It encompasses polymer and nanoparticle assembly in bulk and under confined conditions or influenced by an external field, including thin films, inorganic-organic hybrids, or nanofibers. Volume 8 expands these concepts focusing on applications in advanced technologies, e.g. in electronic industry and centers on combination with top down approach and functional properties like conductivity. Another type of functionality that is of rapidly increasing importance in polymer science is introduced in volume 9. It deals with various aspects of polymers in biology and medicine, including the response of living cells and tissue to the contact with biofunctional particles and surfaces. The last volume is devoted to the scope and potential provided by environmentally benign and green polymers, as well as energy-related polymers. They discuss new technologies needed for a sustainable economy in our world of limited resources. Provides broad and in-depth coverage of all aspects of polymer science from synthesis/polymerization, properties, and characterization methods and techniques to nanostructures, sustainability and energy, and biomedical uses of polymers Provides a definitive source for those entering or researching in this area by integrating the multidisciplinary aspects of the science into one unique, up-to-date reference work Electronic version has complete cross-referencing and multi-media components Volume editors are world experts in their field (including a Nobel Prize winner)
Download or read book Chemical Engineering of Polymers written by Omari V. Mukbaniani and published by CRC Press. This book was released on 2017-11-14 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this important volume, the structures and functions of these advanced polymer and composite systems are evaluated with respect to improved or novel performance, and the potential implications of those developments for the future of polymer-based composites and multifunctional materials are discussed. It focuses exclusively on the latest research related to polymer and composite materials, especially new trends in frontal polymerization and copolymerization synthesis, functionalization of polymers, physical properties, and hybrid systems. Several chapters are devoted to composites and nanocomposites.
Download or read book Wrinkled Polymer Surfaces written by C. M. González-Henríquez and published by Springer. This book was released on 2019-02-14 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state of the art in surface wrinkling, including current and future potential applications in biomedicine, tissue engineering, drug delivery, microfluidic devices, and other promising areas. Their use as templates, flexible electronics, and supports with controlled wettability and/or adhesion for biorelated applications demonstrate how the unique characteristics of wrinkled interfaces play a distinguishing and remarkable role. The fabrication approaches employed to induce wrinkle formation and the potential to fine-tune the amplitude and period of the wrinkles, their functionality, and their final morphology are thoroughly described. An overview of the main applications in which these buckled interfaces have already been employed or may have an impact in the near future is included. Presents a detailed description of the physical phenomena and strategies occurring at polymer surfaces to produce wrinkled surface patterns; Examines the different methodologies to produce morphology-controlled wrinkled surface patterns by means of physical and chemical treatment methods; Provides clear information on current and potential applications in flexible electronics and biomaterials, which are leading the use of these materials.
Download or read book Rapid Fabrication of Polymers and Composites Via Frontal Polymerization written by Ian Donald Robertson and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Frontal Polymer Research written by Robert K. Bregg and published by Nova Publishers. This book was released on 2006 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are substances containing a large number of structural units joined by the same type of linkage. These substances often form into a chain-like structure. Starch, cellulose, and rubber all possess polymeric properties. Today, the polymer industry has grown to be larger than the aluminium, copper and steel industries combined. Polymers already have a range of applications that far exceeds that of any other class of material available to man. Current applications extend from adhesives, coatings, foams, and packaging materials to textile and industrial fibres, elastomers, and structural plastics. Polymers are also used for most composites, electronic devices, biomedical devices, optical devices, and precursors for many newly developed high-tech ceramics. This new book presents leading-edge research in this rapidly-changing and evolving field.
Download or read book Nonlinear Dynamics with Polymers written by John A. Pojman and published by John Wiley & Sons. This book was released on 2011-03-16 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Closing a gap in the literature, this is the first comprehensive handbook on this modern and important polymer topic. Edited by highly experienced and top scientists in the field, this ready reference covers all aspects, including material science, biopolymers, gels, phase separating systems, frontal polymerization and much more. The introductory chapter offers the perfect starting point for the non-expert.
Download or read book Self Assembly Pattern Formation and Growth Phenomena in Nano Systems written by Alexander A. Golovin and published by Springer Science & Business Media. This book was released on 2006 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nano-science and nano-technology are rapidly developing scientific and technological areas that deal with physical, chemical and biological processes that occur on nano-meter scale – one millionth of a millimeter. Self-organization and pattern formation play crucial role on nano-scales and promise new, effective routes to control various nano-scales processes. This book contains lecture notes written by the lecturers of the NATO Advanced Study Institute "Self-Assembly, Pattern Formation and Growth Phenomena in Nano-Systems" that took place in St Etienne de Tinee, France, in the fall 2004. They give examples of self-organization phenomena on micro- and nano-scale as well as examples of the interplay between phenomena on nano- and macro-scales leading to complex behavior in various physical, chemical and biological systems. They discuss such fascinating nano-scale self-organization phenomena as self-assembly of quantum dots in thin solid films, pattern formation in liquid crystals caused by light, self-organization of micro-tubules and molecular motors, as well as basic physical and chemical phenomena that lead to self-assembly of the most important molecule on the basis of which most of living organisms are built – DNA. A review of general features of all pattern forming systems is also given. The authors of these lecture notes are the leading experts in the field of self-organization, pattern formation and nonlinear dynamics in non-equilibrium, complex systems.
Download or read book High Performance Polymers for Engineering Based Composites written by Omari V. Mukbaniani and published by CRC Press. This book was released on 2015-12-23 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Performance Polymers for Engineering-Based Composites presents a selection of investigations and innovative research in polymer chemistry and advanced materials. The book includes case studies in the field of nanocomposites. The volume provides coverage of new research in polymer science and engineering with applications in chemical engineerin
Download or read book ECCM Research Topic on Advanced Manufacturing of Composites written by Veronique Michaud and published by Frontiers Media SA. This book was released on 2023-10-25 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Nonlinear Chemical Dynamics written by Irving R. Epstein and published by Oxford University Press. This book was released on 1998-10-22 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Just a few decades ago, chemical oscillations were thought to be exotic reactions of only theoretical interest. Now known to govern an array of physical and biological processes, including the regulation of the heart, these oscillations are being studied by a diverse group across the sciences. This book is the first introduction to nonlinear chemical dynamics written specifically for chemists. It covers oscillating reactions, chaos, and chemical pattern formation, and includes numerous practical suggestions on reactor design, data analysis, and computer simulations. Assuming only an undergraduate knowledge of chemistry, the book is an ideal starting point for research in the field. The book begins with a brief history of nonlinear chemical dynamics and a review of the basic mathematics and chemistry. The authors then provide an extensive overview of nonlinear dynamics, starting with the flow reactor and moving on to a detailed discussion of chemical oscillators. Throughout the authors emphasize the chemical mechanistic basis for self-organization. The overview is followed by a series of chapters on more advanced topics, including complex oscillations, biological systems, polymers, interactions between fields and waves, and Turing patterns. Underscoring the hands-on nature of the material, the book concludes with a series of classroom-tested demonstrations and experiments appropriate for an undergraduate laboratory.
Download or read book Advanced Materials Polymers and Composites written by Omari V. Mukbaniani and published by CRC Press. This book was released on 2021-11-18 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews several domains of polymer science, especially new trends in polymerization synthesis, physical-chemical properties, and inorganic systems. Composites and nanocomposites are also covered in this book, emphasizing nanotechnologies and their impact on the enhancement of physical and mechanical properties of these new materials. Kinetics and simulation are discussed and also considered as promising techniques for achieving chemistry and predicting physical property goals. This book presents a selection of interdisciplinary papers on the state of knowledge of each topic under consideration through a combination of overviews and original unpublished research.
Download or read book Bottom Up Self Organization in Supramolecular Soft Matter written by Stefan C. Müller and published by Springer. This book was released on 2015-08-01 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the general concepts of self-organized spatio-temporal ordering processes. These concepts are demonstrated via prototypical examples of recent advances in materials science. Particular emphasis is on nano scale soft matter in physics, chemistry, biology and biomedicine. The questions addressed embrace a broad spectrum of complex nonlinear phenomena, ranging from self-assembling near the thermodynamical equilibrium to dissipative structure formation far from equilibrium. Their mutual interplay gives rise to increasing degrees of hierarchical order. Analogues are pointed out, differences characterized and efforts are made to reveal common features in the mechanistic description of those phenomena.
Download or read book Photoinitiators written by Jean-Pierre Fouassier and published by John Wiley & Sons. This book was released on 2021-04-12 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoinitiators A comprehensive text that covers everything from the processes and mechanisms to the reactions and industrial applications of photoinitiators Photoinitiators offers a wide-ranging overview of existing photoinitiators and photoinitiating systems and their uses in ever-growing green technologies. The authors—noted experts on the topic—provide a concise review of the backgrounds in photopolymerization and photochemistry, explain the available structures, and examine the excited state properties, involved mechanisms, and structure, reactivity, and efficiency relationships. The text also contains information on the latest developments and trends in the design of novel tailor-made systems. The book explores the role of current systems in existing and emerging processes and applications. Comprehensive in scope, it covers polymerization of thick samples and in-shadow areas, polymerization under LEDs, NIR light induced thermal polymerization, photoinitiators for novel specific and improved properties, and much more. Written by an experienced and internationally renowned team of authors, this important book: Provides detailed information about excited state processes, mechanisms and design of efficient photoinitiator systems Discusses the performance of photoinitiators of polymerization by numerous examples of reactions and application Includes information on industrial applications Presents a review of current developments and challenges Offers an introduction to the background information necessary to understand thefield The role played by photoinitiators in a variety of different polymerization reactions Written for polymer chemists, photochemists, and materials scientists, Photoinitiators will also earn a place in the libraries of photochemists seeking an authoritative, one-stop guide to the processes, mechanisms, and industrial applications of photoinitiators.
Download or read book Group 13 Chemistry written by Pamela J. Shapiro and published by . This book was released on 2002 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Group 13 Chemistry: From Fundamentals to Applications contains research reports and review articles in both the fundamental and applied aspects of group 13 chemistry. Topics covered illustrate the widespread influence of group 13 chemistry in modern science and technology. This volume addresses recent research and technological achievements involving group 13 chemistry and provides important background information for both experienced practitioners and novices. New developments in group 13 compounds, the stabilization of compounds of the lighter group 13 elements in their +1 oxidation state, and electron-deficient group 13 clusters, are presented. Because of the unusual geometries of newly developed electron-deficient group 13 clusters, chemists have had to reexamine and refine their models of structure and bonding. Furthermore, the stabilization of compounds of the lighter group 13 elements in their +1 oxidation state has produced some unique molecular structures and reactivity. Group 13 compounds are well known as reagents for organic synthesis and as both catalysts and cocatalysts for asymmetric organic transformations and alkene and ring-opening polymerization. Now, the design of multidentate Lewis acids is expected to exhibit enhanced activity via the cooperation of multiple electrophilic sites. Finally, a special section devoted to aluminum chemistry examines the environmental sources and biological effects of this most abundant metal. Research implicating aluminum in the etiology of neurological diseases is examined as well as potentially useful biochemical applications for aluminum in the form of Al4-.
Download or read book Handbook of Thermoset Plastics written by Andreas Kandelbauer and published by Elsevier Inc. Chapters. This book was released on 2013-11-28 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their special structural features (triazine ring, oxygen linkages, low dielectric loss) cyanate ester resins represent a promising class of high-performance polymers. They are suitable as matrix materials for applications where, among other properties, stability at high service temperatures, low dielectric loss, and good mechanical performance is required. This chapter deals with some general aspects regarding the chemistry and technology of cyanate ester resins and highlights their most important applications. Relevant performance characteristics of cyanate esters and selected blends with bismaleimide and epoxy resins are briefly discussed. Some recent developments regarding novel monomers are presented as well.
Download or read book Carbon Nanomaterials in Clean Energy Hydrogen Systems II written by Svetlana Yu. Zaginaichenko and published by Springer. This book was released on 2011-05-12 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected contributions to the NATO Advanced Research Workshop “Carbon Nanomaterials in Clean Energy Hydrogen Systems” held in June 2010. These original papers reflect recent progress in response to the modern-day requirements in chemistry of carbon nanomaterials and metal-hydrogen systems. Successor to the 2008 proceedings, this second volume focuses on research and application studies of materials capable of interacting actively with hydrogen, also addressing questions of hydrogen accumulation and storage. As a whole, it provides a review of the most relevant areas of hydrogen materials interactions and carbon nanomaterials science, making it invaluable for all researchers, physicists, chemists, post-graduates and young scientists interested in the structure, properties and applications of different nanocarbon materials.
Download or read book Handbook of Thermoset Plastics written by Hanna Dodiuk and published by William Andrew. This book was released on 2021-10-25 with total page 1118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Thermoset Plastics, Fourth Edition provides complete coverage of the chemical processes, manufacturing techniques and design properties of each polymer, along with its applications. This new edition has been expanded to include the latest developments in the field, with new chapters on radiation curing, biological adhesives, vitrimers, and 3D printing. This detailed handbook considers the practical implications of using thermoset plastics and the relationships between processing, properties and applications, as well as analyzing the strengths and weakness of different methods and applications. The aim of the book is to help the reader to make the right decision and take the correct action on the basis of informed analysis – avoiding the pitfalls the authors’ experience has uncovered. In industry, the book supports engineers, scientists, manufacturers and R&D professionals working with plastics. The information included will also be of interest to researchers and advanced students in plastics engineering, polymer chemistry, adhesives and coatings. Offers a systematic approach, guiding the reader through chemistry, processing methods, properties and applications of thermosetting polymers Includes thorough updates that discuss current practice and the new developments on biopolymers, nanotechnology, 3D printing, radiation curing and biological adhesives Uses case studies to demonstrate how particular properties make different polymers suitable for different applications Covers end-use and safety considerations
