Download or read book From Bulk to Structural Failure Fracture of Hyperelastic Materials written by Philipp Rosendahl and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book From Bulk to Structural Failure Fracture of Hyperelastic Materials written by Philipp Laurens Rosendahl and published by Springer Nature. This book was released on 2020-12-01 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis investigates the fracture of nearly incompressible hyperelastic media. It covers the different characteristics of bulk material failure under dilatational or distortional loads and develops a unified description of the corresponding failure surface. It proposes a coupled strain and energy failure criterion for the assessment of notch-induced crack nucleation and presents a weak-interface-model that allows for efficient stress, strain and failure analyses of hyperelastic adhesive lap joints. Theoretical concepts for the measurement of fracture properties of nonlinear elastic materials are provided. The methodology is developed using two exemplary hyperelastic silicones, DOWSIL 993 Structural Glazing Sealant and DOWSIL Transparent Structural Silicone Adhesive, and is validated using large sets of experiments of different loading conditions.
Download or read book Current Perspectives and New Directions in Mechanics Modelling and Design of Structural Systems written by Alphose Zingoni and published by CRC Press. This book was released on 2022-09-02 with total page 4438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems comprises 330 papers that were presented at the Eighth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022, Cape Town, South Africa, 5-7 September 2022). The topics featured may be clustered into six broad categories that span the themes of mechanics, modelling and engineering design: (i) mechanics of materials (elasticity, plasticity, porous media, fracture, fatigue, damage, delamination, viscosity, creep, shrinkage, etc); (ii) mechanics of structures (dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) numerical modelling and experimental testing (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber); (v) innovative concepts, sustainable engineering and special structures (nanostructures, adaptive structures, smart structures, composite structures, glass structures, bio-inspired structures, shells, membranes, space structures, lightweight structures, etc); (vi) the engineering process and life-cycle considerations (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). Two versions of the papers are available: full papers of length 6 pages are included in the e-book, while short papers of length 2 pages, intended to be concise but self-contained summaries of the full papers, are in the printed book. This work will be of interest to civil, structural, mechanical, marine and aerospace engineers, as well as planners and architects.
Download or read book Material Modeling and Structural Mechanics written by Holm Altenbach and published by Springer Nature. This book was released on 2022-05-03 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents various questions of continuum mechanical modeling in the context of experimental and numerical methods, in particular, multi-field problems that go beyond the standard models of continuum mechanics. In addition, it discusses dynamic problems and practical solutions in the field of numerical methods. It focuses on continuum mechanics, which is often overlooked in the traditional division of mechanics into statics, strength of materials and kinetics. The book is dedicated to Prof. Volker Ulbricht, who passed away on April 9, 2021.
Download or read book Progress in Structural Mechanics written by Holm Altenbach and published by Springer Nature. This book was released on 2024-01-01 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is devoted to the retirement of Prof. Wilfried Becker—a liber amicorum for a well-known specialist in the field of structural mechanics. Many excellent scientists from institutions around the world wrote their scientific chapters, stressing the Becker’s influence to structural mechanics. Thus, this collection discusses a lot of important problems and applications of mechanics.
Download or read book Thermomechanical Modeling and Experimental Characterization of Sheet Molding Compound Composites written by Lang, Juliane and published by KIT Scientific Publishing. This book was released on 2023-06-28 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this work is to model and experimentally characterize the anisotropic material behavior of SMC composites on the macroscale with consideration of the microstructure. Temperature-dependent thermoelastic behavior and failure behavior are modeled and the corresponding material properties are determined experimentally. Additionally, experimental biaxial damage investigations are performed. A parameter identification merges modeling and experiments and validates the models.
Download or read book Proceedings of 8th GACM Colloquium on Computational Mechanics written by Tobias Gleim and published by kassel university press GmbH. This book was released on 2019-09-04 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference book contains papers presented at the 8th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry. The conference was held from August 28th – 30th, 2019 in Kassel, hosted by the Institute of Mechanics and Dynamics of the department for civil and environmental engineering and by the chair of Engineering Mechanics / Continuum Mechanics of the department for mechanical engineering of the University of Kassel. The aim of the conference is, to bring together young scientits who are engaged in academic and industrial research on Computational Mechanics and Computer Methods in Applied Sciences. It provides a plattform to present and discuss recent results from research efforts and industrial applications. In more than 150 presentations, given by young scientists, current scientific developments and advances in engineering practice in this field are presented and discussed. The contributions of the young researchers are supplemented by a poster session and plenary talks from four senior scientists from academia and industry as well as from the GACM Best PhD Award winners 2017 and 2018.
Download or read book Advances in Fracture Resistance and Structural Integrity written by V.V. Panasyuk and published by Newnes. This book was released on 2012-12-02 with total page 781 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 8th International Conference on Fracture (ICF8), held in Kyiv, Ukraine, attracted 550 delegates from 30 countries with over 700 papers presented. This volume contains a representative selection of 72 articles of the highest standard from internationally renowned experts in the field. Principal topics covered include: mechanics and criteria of fracture, stress-strain analysis in solids with cracks, physics and mechanics of fracture, dynamic fracture, environmental effects, temperature influence on fracture, advanced and special-purpose materials engineering applications of fracture mechanics, fracture mechanics and strength of welded joints and structures, testing techniques and failure diagnostics. For anyone working in fracture mechanics and the performance of materials, this volume provides a valuable snapshot of the major recent developments in the field.
Download or read book Fracture of Structural Materials written by A. S. Tetelman and published by John Wiley & Sons. This book was released on 1967 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Problems of Fracture Mechanics and Fatigue written by E.E. Gdoutos and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: On Fracture Mechanics A major objective of engineering design is the determination of the geometry and dimensions of machine or structural elements and the selection of material in such a way that the elements perform their operating function in an efficient, safe and economic manner. For this reason the results of stress analysis are coupled with an appropriate failure criterion. Traditional failure criteria based on maximum stress, strain or energy density cannot adequately explain many structural failures that occurred at stress levels considerably lower than the ultimate strength of the material. On the other hand, experiments performed by Griffith in 1921 on glass fibers led to the conclusion that the strength of real materials is much smaller, typically by two orders of magnitude, than the theoretical strength. The discipline of fracture mechanics has been created in an effort to explain these phenomena. It is based on the realistic assumption that all materials contain crack-like defects from which failure initiates. Defects can exist in a material due to its composition, as second-phase particles, debonds in composites, etc. , they can be introduced into a structure during fabrication, as welds, or can be created during the service life of a component like fatigue, environment-assisted or creep cracks. Fracture mechanics studies the loading-bearing capacity of structures in the presence of initial defects. A dominant crack is usually assumed to exist.
Download or read book Fracture of Engineering Materials and Structures written by S.H. Teoh and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in the field of fracture of engineering materials and structures have increasingly indicated its multidisciplinary nature. This area of research now involves scientists and engineers who work in materials science, applied mathematics and mechanics, and also computer scientists. The present volume, which contains the Proceedings of the Joint FEFG/lCF International Conference on Fracture of Engineering Materials and Structures held in Singapore from the 6th to 8th of August 1991, is a testimony of this multidisciplinary nature. This International Conference was the Second Symposium of the Far East Fracture Group (FEFG) and thus provided a unique opportunity for researchers and engineers in the Far East region to exchange and acquire knowledge of new advances and applications in fracture. The Conference was also the Inter-Quadrennial International Conference on Fracture (ICF) for 1991 and thus appealed to researchers in the international arena who wished to take advantage of this meeting to present their findings. The Conference has brought together over 130 participants from more than 24 countries, and they represented government and industrial research laboratories as well as academic institutions. It has thus achieved its objective of bringing together scientists and engineers with different backgrounds and perspectives but with . a common interest in new developments in the fracture of engineering materials and structures. This volume contains 4 keynote papers, 4 invited papers and 130 contributed papers.
Download or read book Damage and Fracture Mechanics written by Taoufik Boukharouba and published by Springer Science & Business Media. This book was released on 2009-08-09 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First African InterQuadrennial ICF Conference “AIQ-ICF2008” on Damage and Fracture Mechanics – Failure Analysis of Engineering Materials and Structures”, Algiers, Algeria, June 1–5, 2008 is the first in the series of InterQuadrennial Conferences on Fracture to be held in the continent of Africa. During the conference, African researchers have shown that they merit a strong reputation in international circles and continue to make substantial contributions to the field of fracture mechanics. As in most countries, the research effort in Africa is und- taken at the industrial, academic, private sector and governmental levels, and covers the whole spectrum of fracture and fatigue. The AIQ-ICF2008 has brought together researchers and engineers to review and discuss advances in the development of methods and approaches on Damage and Fracture Mechanics. By bringing together the leading international experts in the field, AIQ-ICF promotes technology transfer and provides a forum for industry and researchers of the host nation to present their accomplishments and to develop new ideas at the highest level. International Conferences have an important role to play in the technology transfer process, especially in terms of the relationships to be established between the participants and the informal exchange of ideas that this ICF offers.
Download or read book Physics of Strength and Fracture Control written by Anatoly A. Komarovsky and published by CRC Press. This book was released on 2002-09-17 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: Still passive and for the most part uncontrollable, current systems intended to ensure the reliability and durability of engineering structures are still in their developmental infancy. They cannot make corrections or recondition materials, and most material and structural failures cannot be predicted. Accidents-and catastrophes-result. Phys
Download or read book Damage and Fracture Mechanics written by Taoufik Boukharouba and published by Springer. This book was released on 2009-08-12 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First African InterQuadrennial ICF Conference “AIQ-ICF2008” on Damage and Fracture Mechanics – Failure Analysis of Engineering Materials and Structures”, Algiers, Algeria, June 1–5, 2008 is the first in the series of InterQuadrennial Conferences on Fracture to be held in the continent of Africa. During the conference, African researchers have shown that they merit a strong reputation in international circles and continue to make substantial contributions to the field of fracture mechanics. As in most countries, the research effort in Africa is und- taken at the industrial, academic, private sector and governmental levels, and covers the whole spectrum of fracture and fatigue. The AIQ-ICF2008 has brought together researchers and engineers to review and discuss advances in the development of methods and approaches on Damage and Fracture Mechanics. By bringing together the leading international experts in the field, AIQ-ICF promotes technology transfer and provides a forum for industry and researchers of the host nation to present their accomplishments and to develop new ideas at the highest level. International Conferences have an important role to play in the technology transfer process, especially in terms of the relationships to be established between the participants and the informal exchange of ideas that this ICF offers.
Download or read book Damage and Fracture Mechanics written by Taoufik Boukharouba and published by Springer. This book was released on 2009-08-29 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First African InterQuadrennial ICF Conference “AIQ-ICF2008” on Damage and Fracture Mechanics – Failure Analysis of Engineering Materials and Structures”, Algiers, Algeria, June 1–5, 2008 is the first in the series of InterQuadrennial Conferences on Fracture to be held in the continent of Africa. During the conference, African researchers have shown that they merit a strong reputation in international circles and continue to make substantial contributions to the field of fracture mechanics. As in most countries, the research effort in Africa is und- taken at the industrial, academic, private sector and governmental levels, and covers the whole spectrum of fracture and fatigue. The AIQ-ICF2008 has brought together researchers and engineers to review and discuss advances in the development of methods and approaches on Damage and Fracture Mechanics. By bringing together the leading international experts in the field, AIQ-ICF promotes technology transfer and provides a forum for industry and researchers of the host nation to present their accomplishments and to develop new ideas at the highest level. International Conferences have an important role to play in the technology transfer process, especially in terms of the relationships to be established between the participants and the informal exchange of ideas that this ICF offers.
Download or read book Elastic plastic Fracture Mechanics written by Open University. Structural Integrity: Designing Against Failure Course Team and published by . This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book looks at an extension of fracture mechanics to cases where significant plasticity may be associated with the growth of a crack in a material, and how assessments of possible failures are performed in such cases.This book requires the K Calculator available on the CD-ROM (order code T357/CDR01).
Download or read book Fracture Mechanics Case Studies written by Open University. Structural Integrity: Designing Against Failure Course Team and published by . This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains three case studies: a return to the crane hook that was introduced in Stress Analysis, looking at the design in more detail; a brief example of how temperature effects can degrade the performance of a component during service, through the phenomenon of creep; and finally a look at the failure of a polymer storage tank, to illustrate the importance of understanding materials properties at the temperature at which they will operate.
