Download or read book From Algorithms to Hardware Architectures written by Karim Abbas and published by Springer Nature. This book was released on 2022-08-05 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book uses digital radios as a challenging design example, generalized to bridge a typical gap between designers who work on algorithms and those who work to implement those algorithms on silicon. The author shows how such a complex system can be moved from high-level characterization to a form that is ready for hardware implementation. Along the way, readers learn a lot about how algorithm designers can benefit from knowing the hardware they target and how hardware designers can benefit from a familiarity with the algorithm. The book shows how a high-level description of an algorithm can be migrated to a fixed-point block diagram with a well-defined cycle accurate architecture and a fully documented controller. This can significantly reduce the length of the hardware design cycle and can improve its outcomes. Ultimately, the book presents an explicit design flow that bridges the gap between algorithm design and hardware design. Provides a guide to baseband radio design for Wi-Fi and cellular systems, from an implementation-focused, perspective; Explains how arithmetic is moved to hardware and what the cost of each operation is in terms of delay, area and power; Enables strategic architectural decisions based on the algorithm, available processing units and design requirements.

Download or read book Hardware Architectures for Post Quantum Digital Signature Schemes written by Deepraj Soni and published by Springer Nature. This book was released on 2020-10-27 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores C-based design, implementation, and analysis of post-quantum cryptography (PQC) algorithms for signature generation and verification. The authors investigate NIST round 2 PQC algorithms for signature generation and signature verification from a hardware implementation perspective, especially focusing on C-based design, power-performance-area-security (PPAS) trade-offs and design flows targeting FPGAs and ASICs. Describes a comprehensive set of synthesizable c code base as well as the hardware implementations for the different types of PQC algorithms including lattice-based, code-based, and multivariate-based; Demonstrates the hardware (FPGA and ASIC) and hardware-software optimizations and trade-offs of the NIST round 2 signature-based PQC algorithms; Enables designers to build hardware implementations that are resilient to a variety of side-channels.

Download or read book Efficient Processing of Deep Neural Networks written by Vivienne Sze and published by Springer Nature. This book was released on 2022-05-31 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a structured treatment of the key principles and techniques for enabling efficient processing of deep neural networks (DNNs). DNNs are currently widely used for many artificial intelligence (AI) applications, including computer vision, speech recognition, and robotics. While DNNs deliver state-of-the-art accuracy on many AI tasks, it comes at the cost of high computational complexity. Therefore, techniques that enable efficient processing of deep neural networks to improve key metrics—such as energy-efficiency, throughput, and latency—without sacrificing accuracy or increasing hardware costs are critical to enabling the wide deployment of DNNs in AI systems. The book includes background on DNN processing; a description and taxonomy of hardware architectural approaches for designing DNN accelerators; key metrics for evaluating and comparing different designs; features of DNN processing that are amenable to hardware/algorithm co-design to improve energy efficiency and throughput; and opportunities for applying new technologies. Readers will find a structured introduction to the field as well as formalization and organization of key concepts from contemporary work that provide insights that may spark new ideas.

Download or read book Cryptography Arithmetic written by Amos R. Omondi and published by Springer Nature. This book was released on 2020-01-30 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern cryptosystems, used in numerous applications that require secrecy or privacy - electronic mail, financial transactions, medical-record keeping, government affairs, social media etc. - are based on sophisticated mathematics and algorithms that in implementation involve much computer arithmetic. And for speed it is necessary that the arithmetic be realized at the hardware (chip) level. This book is an introduction to the implementation of cryptosystems at that level. The aforementioned arithmetic is mostly the arithmetic of finite fields, and the book is essentially one on the arithmetic of prime fields and binary fields in the context of cryptography. The book has three main parts. The first part is on generic algorithms and hardware architectures for the basic arithmetic operations: addition, subtraction, multiplication, and division. The second part is on the arithmetic of prime fields. And the third part is on the arithmetic of binary fields. The mathematical fundamentals necessary for the latter two parts are included, as are descriptions of various types of cryptosystems, to provide appropriate context. This book is intended for advanced-level students in Computer Science, Computer Engineering, and Electrical and Electronic Engineering. Practitioners too will find it useful, as will those with a general interest in "hard" applications of mathematics.

Download or read book New Algorithms Architectures and Applications for Reconfigurable Computing written by Patrick Lysaght and published by Springer Science & Business Media. This book was released on 2005-07-01 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Algorithms, Architectures and Applications for Reconfigurable Computing consists of a collection of contributions from the authors of some of the best papers from the Field Programmable Logic conference (FPL’03) and the Design and Test Europe conference (DATE’03). In all, seventy-nine authors, from research teams from all over the world, were invited to present their latest research in the extended format permitted by this special volume. The result is a valuable book that is a unique record of the state of the art in research into field programmable logic and reconfigurable computing. The contributions are organized into twenty-four chapters and are grouped into three main categories: architectures, tools and applications. Within these three broad areas the most strongly represented themes are coarse-grained architectures; dynamically reconfigurable and multi-context architectures; tools for coarse-grained and reconfigurable architectures; networking, security and encryption applications. Field programmable logic and reconfigurable computing are exciting research disciplines that span the traditional boundaries of electronic engineering and computer science. When the skills of both research communities are combined to address the challenges of a single research discipline they serve as a catalyst for innovative research. The work reported in the chapters of this book captures that spirit of that innovation.

Download or read book Algorithms for Visual Design Using the Processing Language written by Kostas Terzidis and published by John Wiley & Sons. This book was released on 2009-04-08 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the first book to share the necessary algorithms for creating code to experiment with design problems in the processing language, this book offers a series of generic procedures that can function as building blocks and encourages you to then use those building blocks to experiment, explore, and channel your thoughts, ideas, and principles into potential solutions. The book covers such topics as structured shapes, solid geometry, networking and databases, physical computing, image processing, graphic user interfaces, and more.

Download or read book Introduction to Parallel Processing written by Behrooz Parhami and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE CONTEXT OF PARALLEL PROCESSING The field of digital computer architecture has grown explosively in the past two decades. Through a steady stream of experimental research, tool-building efforts, and theoretical studies, the design of an instruction-set architecture, once considered an art, has been transformed into one of the most quantitative branches of computer technology. At the same time, better understanding of various forms of concurrency, from standard pipelining to massive parallelism, and invention of architectural structures to support a reasonably efficient and user-friendly programming model for such systems, has allowed hardware performance to continue its exponential growth. This trend is expected to continue in the near future. This explosive growth, linked with the expectation that performance will continue its exponential rise with each new generation of hardware and that (in stark contrast to software) computer hardware will function correctly as soon as it comes off the assembly line, has its down side. It has led to unprecedented hardware complexity and almost intolerable dev- opment costs. The challenge facing current and future computer designers is to institute simplicity where we now have complexity; to use fundamental theories being developed in this area to gain performance and ease-of-use benefits from simpler circuits; to understand the interplay between technological capabilities and limitations, on the one hand, and design decisions based on user and application requirements on the other.

Download or read book Embedded Deep Learning written by Bert Moons and published by Springer. This book was released on 2018-10-23 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers algorithmic and hardware implementation techniques to enable embedded deep learning. The authors describe synergetic design approaches on the application-, algorithmic-, computer architecture-, and circuit-level that will help in achieving the goal of reducing the computational cost of deep learning algorithms. The impact of these techniques is displayed in four silicon prototypes for embedded deep learning. Gives a wide overview of a series of effective solutions for energy-efficient neural networks on battery constrained wearable devices; Discusses the optimization of neural networks for embedded deployment on all levels of the design hierarchy – applications, algorithms, hardware architectures, and circuits – supported by real silicon prototypes; Elaborates on how to design efficient Convolutional Neural Network processors, exploiting parallelism and data-reuse, sparse operations, and low-precision computations; Supports the introduced theory and design concepts by four real silicon prototypes. The physical realization’s implementation and achieved performances are discussed elaborately to illustrated and highlight the introduced cross-layer design concepts.

Download or read book Artificial Intelligence Hardware Design written by Albert Chun-Chen Liu and published by John Wiley & Sons. This book was released on 2021-08-23 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: ARTIFICIAL INTELLIGENCE HARDWARE DESIGN Learn foundational and advanced topics in Neural Processing Unit design with real-world examples from leading voices in the field In Artificial Intelligence Hardware Design: Challenges and Solutions, distinguished researchers and authors Drs. Albert Chun Chen Liu and Oscar Ming Kin Law deliver a rigorous and practical treatment of the design applications of specific circuits and systems for accelerating neural network processing. Beginning with a discussion and explanation of neural networks and their developmental history, the book goes on to describe parallel architectures, streaming graphs for massive parallel computation, and convolution optimization. The authors offer readers an illustration of in-memory computation through Georgia Tech’s Neurocube and Stanford’s Tetris accelerator using the Hybrid Memory Cube, as well as near-memory architecture through the embedded eDRAM of the Institute of Computing Technology, the Chinese Academy of Science, and other institutions. Readers will also find a discussion of 3D neural processing techniques to support multiple layer neural networks, as well as information like: A thorough introduction to neural networks and neural network development history, as well as Convolutional Neural Network (CNN) models Explorations of various parallel architectures, including the Intel CPU, Nvidia GPU, Google TPU, and Microsoft NPU, emphasizing hardware and software integration for performance improvement Discussions of streaming graph for massive parallel computation with the Blaize GSP and Graphcore IPU An examination of how to optimize convolution with UCLA Deep Convolutional Neural Network accelerator filter decomposition Perfect for hardware and software engineers and firmware developers, Artificial Intelligence Hardware Design is an indispensable resource for anyone working with Neural Processing Units in either a hardware or software capacity.

Download or read book Verilog Digital Computer Design written by Mark Gordon Arnold and published by Prentice Hall. This book was released on 1999 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shorten time to market with this top-down, real-world approach to Verilog HDLdesign.

Download or read book Computer Arithmetic written by Mircea Vlăduţiu and published by Springer Science & Business Media. This book was released on 2012-09-13 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of this book is the analysis and design of digital devices that implement computer arithmetic. The book's presentation of high-level detail, descriptions, formalisms and design principles means that it can support many research activities in this field, with an emphasis on bridging the gap between algorithm optimization and hardware implementation. The author provides a unified view linking the domains of digital design and arithmetic algorithms, based on original formalisms and hardware description languages. A feature of the book is the large number of examples and the implementation details provided. While the author does not avoid high-level details, providing for example gate-level designs for all matrix/combinational arithmetic structures. The book is suitable for researchers and students engaged with hardware design in computer science and engineering. A feature of the book is the large number of examples and the implementation details provided. While the author does not avoid high-level details, providing for example gate-level designs for all matrix/combinational arithmetic structures. The book is suitable for researchers and students engaged with hardware design in computer science and engineering.

Download or read book High Performance Datacenter Networks written by Dennis Abts and published by Morgan & Claypool Publishers. This book was released on 2011-02-02 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: Datacenter networks provide the communication substrate for large parallel computer systems that form the ecosystem for high performance computing (HPC) systems and modern Internet applications. The design of new datacenter networks is motivated by an array of applications ranging from communication intensive climatology, complex material simulations and molecular dynamics to such Internet applications as Web search, language translation, collaborative Internet applications, streaming video and voice-over-IP. For both Supercomputing and Cloud Computing the network enables distributed applications to communicate and interoperate in an orchestrated and efficient way. This book describes the design and engineering tradeoffs of datacenter networks. It describes interconnection networks from topology and network architecture to routing algorithms, and presents opportunities for taking advantage of the emerging technology trends that are influencing router microarchitecture. With the emergence of "many-core" processor chips, it is evident that we will also need "many-port" routing chips to provide a bandwidth-rich network to avoid the performance limiting effects of Amdahl's Law. We provide an overview of conventional topologies and their routing algorithms and show how technology, signaling rates and cost-effective optics are motivating new network topologies that scale up to millions of hosts. The book also provides detailed case studies of two high performance parallel computer systems and their networks. Table of Contents: Introduction / Background / Topology Basics / High-Radix Topologies / Routing / Scalable Switch Microarchitecture / System Packaging / Case Studies / Closing Remarks

Download or read book Deep Learning Systems written by Andres Rodriguez and published by Springer Nature. This book was released on 2022-05-31 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes deep learning systems: the algorithms, compilers, and processor components to efficiently train and deploy deep learning models for commercial applications. The exponential growth in computational power is slowing at a time when the amount of compute consumed by state-of-the-art deep learning (DL) workloads is rapidly growing. Model size, serving latency, and power constraints are a significant challenge in the deployment of DL models for many applications. Therefore, it is imperative to codesign algorithms, compilers, and hardware to accelerate advances in this field with holistic system-level and algorithm solutions that improve performance, power, and efficiency. Advancing DL systems generally involves three types of engineers: (1) data scientists that utilize and develop DL algorithms in partnership with domain experts, such as medical, economic, or climate scientists; (2) hardware designers that develop specialized hardware to accelerate the components in the DL models; and (3) performance and compiler engineers that optimize software to run more efficiently on a given hardware. Hardware engineers should be aware of the characteristics and components of production and academic models likely to be adopted by industry to guide design decisions impacting future hardware. Data scientists should be aware of deployment platform constraints when designing models. Performance engineers should support optimizations across diverse models, libraries, and hardware targets. The purpose of this book is to provide a solid understanding of (1) the design, training, and applications of DL algorithms in industry; (2) the compiler techniques to map deep learning code to hardware targets; and (3) the critical hardware features that accelerate DL systems. This book aims to facilitate co-innovation for the advancement of DL systems. It is written for engineers working in one or more of these areas who seek to understand the entire system stack in order to better collaborate with engineers working in other parts of the system stack. The book details advancements and adoption of DL models in industry, explains the training and deployment process, describes the essential hardware architectural features needed for today's and future models, and details advances in DL compilers to efficiently execute algorithms across various hardware targets. Unique in this book is the holistic exposition of the entire DL system stack, the emphasis on commercial applications, and the practical techniques to design models and accelerate their performance. The author is fortunate to work with hardware, software, data scientist, and research teams across many high-technology companies with hyperscale data centers. These companies employ many of the examples and methods provided throughout the book.

Download or read book Architectures for Computer Vision written by Hong Jeong and published by John Wiley & Sons. This book was released on 2014-08-05 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive coverage of 3D vision systems, from vision models and state-of-the-art algorithms to their hardware architectures for implementation on DSPs, FPGA and ASIC chips, and GPUs. It aims to fill the gaps between computer vision algorithms and real-time digital circuit implementations, especially with Verilog HDL design. The organization of this book is vision and hardware module directed, based on Verilog vision modules, 3D vision modules, parallel vision architectures, and Verilog designs for the stereo matching system with various parallel architectures. Provides Verilog vision simulators, tailored to the design and testing of general vision chips Bridges the differences between C/C++ and HDL to encompass both software realization and chip implementation; includes numerous examples that realize vision algorithms and general vision processing in HDL Unique in providing an organized and complete overview of how a real-time 3D vision system-on-chip can be designed Focuses on the digital VLSI aspects and implementation of digital signal processing tasks on hardware platforms such as ASICs and FPGAs for 3D vision systems, which have not been comprehensively covered in one single book Provides a timely view of the pervasive use of vision systems and the challenges of fusing information from different vision modules Accompanying website includes software and HDL code packages to enhance further learning and develop advanced systems A solution set and lecture slides are provided on the book's companion website The book is aimed at graduate students and researchers in computer vision and embedded systems, as well as chip and FPGA designers. Senior undergraduate students specializing in VLSI design or computer vision will also find the book to be helpful in understanding advanced applications.

Download or read book Parallel Computers 2 written by R.W Hockney and published by CRC Press. This book was released on 1988-01-01 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the first edition, parallel computing technology has gained considerable momentum. A large proportion of this has come from the improvement in VLSI techniques, offering one to two orders of magnitude more devices than previously possible. A second contributing factor in the fast development of the subject is commercialization. The supercomputer is no longer restricted to a few well-established research institutions and large companies. A new computer breed combining the architectural advantages of the supercomputer with the advance of VLSI technology is now available at very attractive prices. A pioneering device in this development is the transputer, a VLSI processor specifically designed to operate in large concurrent systems. Parallel Computers 2: Architecture, Programming and Algorithms reflects the shift in emphasis of parallel computing and tracks the development of supercomputers in the years since the first edition was published. It looks at large-scale parallelism as found in transputer ensembles. This extensively rewritten second edition includes major new sections on the transputer and the OCCAM language. The book contains specific information on the various types of machines available, details of computer architecture and technologies, and descriptions of programming languages and algorithms. Aimed at an advanced undergraduate and postgraduate level, this handbook is also useful for research workers, machine designers, and programmers concerned with parallel computers. In addition, it will serve as a guide for potential parallel computer users, especially in disciplines where large amounts of computer time are regularly used.

Download or read book Cryptographic Algorithms on Reconfigurable Hardware written by Francisco Rodriguez-Henriquez and published by Springer Science & Business Media. This book was released on 2007-04-03 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software-based cryptography can be used for security applications where data traffic is not too large and low encryption rate is tolerable. But hardware methods are more suitable where speed and real-time encryption are needed. Until now, there has been no book explaining how cryptographic algorithms can be implemented on reconfigurable hardware devices. This book covers computational methods, computer arithmetic algorithms, and design improvement techniques needed to implement efficient cryptographic algorithms in FPGA reconfigurable hardware platforms. The author emphasizes the practical aspects of reconfigurable hardware design, explaining the basic mathematics involved, and giving a comprehensive description of state-of-the-art implementation techniques.

Download or read book Introduction to Reconfigurable Computing written by Christophe Bobda and published by Springer Science & Business Media. This book was released on 2007-09-30 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is a comprehensive study of the field. It provides an entry point to the novice willing to move in the research field reconfigurable computing, FPGA and system on programmable chip design. The book can also be used as teaching reference for a graduate course in computer engineering, or as reference to advance electrical and computer engineers. It provides a very strong theoretical and practical background to the field, from the early Estrin’s machine to the very modern architecture such as embedded logic devices.