Download or read book Titanium and Titanium Alloys written by Christoph Leyens and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.
Download or read book Proceedings of the 13th World Conference on Titanium written by Vasisht Venkatesh and published by John Wiley & Sons. This book was released on 2016-04-26 with total page 2004 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the Proceedings of the 13th World Conference on Titanium.
Download or read book Advanced Tribology written by Jianbin Luo and published by Springer Science & Business Media. This book was released on 2010-07-16 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Advanced Tribology" is the proceedings of the 5th China International Symposium on Tribology (held every four years) and the 1st International Tribology Symposium of IFToMM, held in Beijing 24th-27th September 2008. It contains seven parts: lubrication; friction and wear; micro/nano-tribology; tribology of coatings, surface and interface; biotribology; tribo-chemistry; industry tribology. The book reflects the recent progress in the fields such as lubrication, friction and wear, coatings, and precision manufacture etc. in the world. The book is intended for researchers, engineers and graduate students in the field of tribology, lubrication, mechanical production and industrial design. The editors Jianbin Luo, Yonggang Meng, Tianmin Shao and Qian Zhao are all the professors at the State Key Lab of Tribology, Tsinghua University, Beijing.
Download or read book Machining of Titanium Alloys written by J. Paulo Davim and published by Springer. This book was released on 2014-07-05 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of examples illustrating the resent research advances in the machining of titanium alloys. These materials have excellent strength and fracture toughness as well as low density and good corrosion resistance; however, machinability is still poor due to their low thermal conductivity and high chemical reactivity with cutting tool materials. This book presents solutions to enhance machinability in titanium-based alloys and serves as a useful reference to professionals and researchers in aerospace, automotive and biomedical fields.
Download or read book Intelligent Manufacturing and Energy Sustainability written by A.N.R. Reddy and published by Springer Nature. This book was released on 2020-02-14 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes selected, high-quality papers presented at the International Conference on Intelligent Manufacturing and Energy Sustainability (ICIMES 2019) held at the Department of Mechanical Engineering, Malla Reddy College of Engineering & Technology (MRCET), Maisammaguda, Hyderabad, India, from 21 to 22 June 2019. It covers topics in the areas of automation, manufacturing technology and energy sustainability.
Download or read book Advances in Micro and Nano Manufacturing and Surface Engineering written by Bijoy Bhattacharyya and published by Springer Nature. This book was released on 2022-09-12 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the 8th International and 29th All India Manufacturing Technology, Design, and Research Conference (AIMTDR 2021). It discusses the latest advances in miniature manufacturing, machining of miniature components, surface engineering, nanomaterials, nanotechnology, industry 4.0, optimization techniques, micro-electric discharge machining, electrochemical micro-machining, thin films, optimization of micro-machining process parameters, machining of nano-composites, characterization using atomic force microscopy, micro tool fabrications, characterization of nano-composites, surface roughness analysis, tribological performance of surface coated materials, and sustainability in manufacturing. The contents of this book are useful for students, researchers, and as well as industry professionals working in the various areas of mechanical engineering.
Download or read book Handbook of Research on Tribology in Coatings and Surface Treatment written by Pakseresht, Amirhossein and published by IGI Global. This book was released on 2022-03-25 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances are continuously being made in applying the coatings and surface treatments by different techniques to reduce the damages from tribology. Engineers need more detailed information to compare the capability of each coating process in wear resistant and lubrication applications. It is also important to focus on the concepts of tribology in various applications such as the manufacturing process, bio implants, machine elements, and corrosive environments. The need for a comprehensive resource addressing these findings in order to improve wear resistance is unavoidable. The Handbook of Research on Tribology in Coatings and Surface Treatment evaluates the latest advances the fabrication of wear-resistant and lubricant coatings by different techniques and investigates wear-resistant coatings and surface treatments in various applications such as the automobile industry. Covering a wide range of topics such as lubricant coatings and wearable electronic devices, it is ideal for engineers, industry professionals, researchers, academicians, scholars, practitioners, instructors, and students.
Download or read book Surface Engineering of Light Alloys written by Hanshan Dong and published by Elsevier. This book was released on 2010-05-24 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing use of light alloys in industries such as aerospace, sports equipment and biomedical devices is driving research into surface engineering technologies to enhance their properties for the desired end use. Surface engineering of light alloys: Aluminium, magnesium and titanium alloys provides a comprehensive review of the latest technologies for modifying the surfaces of light alloys to improve their corrosion, wear and tribological properties.Part one discusses surface degradation of light alloys with chapters on corrosion behaviour of magnesium alloys and protection techniques, wear properties of aluminium-based alloys and tribological behaviour of titanium alloys. Part two reviews surface engineering technologies for light alloys including anodising, plasma electrolytic oxidation, thermal spraying, cold spraying, physical vapour deposition, plasma assisted surface treatment, PIII/PSII treatments, laser surface modification, ceramic conversion and duplex treatments. Part three covers applications for surface engineered light alloys including sports equipment, biomedical devices and plasma electrolytic oxidation and anodised aluminium alloys for spacecraft applications.With its distinguished editor and international team of contributors, Surface engineering of light alloys: Aluminium, magnesium and titanium alloys is a standard reference for engineers, metallurgists and materials scientists looking for a comprehensive source of information on surface engineering of aluminium, magnesium and titanium alloys. - Discusses surface degradation of light alloys considering corrosion behaviour and wear and tribological properties - Examines surface engineering technologies and modification featuring plasma electrolytic oxidation treatments and both thermal and cold spraying - Reviews applications for engineered light alloys in sports equipment, biomedical devices and spacecraft
Download or read book Materials Processing Fundamentals 2019 written by Guillaume Lambotte and published by Springer. This book was released on 2019-02-09 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes contributions from the Materials Processing Fundamentals Symposium held at the TMS 2019 Annual Meeting & Exhibition in San Antonio, Texas. This volume includes contributions on the physical and numerical modeling of materials processing, and covers a range of metals and minerals. Authors present models and results related the basics of processing such as extraction, joining, separation, and casting. The corresponding fundamentals of mass and heat transport as well as physical and thermodynamics properties are addressed, allowing for a cross-disciplinary vision of the field.
Download or read book Surface Engineering by Friction Assisted Processes written by B. Ratna Sunil and published by CRC Press. This book was released on 2019-10-08 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is a comprehensive resource that compiles extensive descriptions of friction stir processing, fabrication of surface metal matrix composites, and friction surfacing into one volume. The book is separated into four sections, beginning with a discussion of surface tailoring of metals by friction stir processing. This first section delves into the basics of friction stir processing (FSP), incorporating illustrations to explain the supporting mechanisms of this process. This section culminates with the introduction of potential applications of FSP in the manufacturing industry and obstacles that may arise when implemented. The following two sections explore and discuss surface metal matrix composites by friction stir processing and surface engineering by friction surfacing. They provide a thorough explanation of the material systems involved in the respective processes and discuss in detail the mechanisms behind each. The book, which closes with a comprehensive discussion of recent developments in friction-assisted processes and their functionality, offers a unique compilation of information on these increasingly prominent developments in the field of surface engineering. This volume organizes the information in a manner that is both easily accessible and comprehensible, utilizing visuals such as figures, tables, and photographs to enhance readers’ understanding. Key features: • Explores a multitude of topics within the field of surface engineering at length • Summarizes and explores the mechanical foundation of friction stir processing, fabrication of surface metal matrix composites, and friction surfacing • Incorporates figures and tables to aid in illustrating the concepts discussed • Offers potential applications and discusses future benefits of specific elements pertaining to surface engineering
Download or read book Titanium in Medicine written by D.M. Brunette and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1019 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing scientific and technical in-depth information in a clear format with a homogeneous structure, this text is suited for educational and self-teaching purposes as well as a reference on titanium for biomedical applications. It covers the whole area relevant to the use of titanium for implants, devices and instruments in medicine: material and surface science, physics, chemistry, biology, medicine, quality and regulatory aspects.
Download or read book Metal Surfaces written by Roberto Montanari and published by MDPI. This book was released on 2021-08-31 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection covers the physical and chemical phenomena of metal surfaces, including surface modifications and treatments. It is targeted at researchers working in materials science and also at newcomers to the research field of metal surfaces and surface analysis.
Download or read book Friction Wear and Wear Protection written by Alfons Fischer and published by John Wiley & Sons. This book was released on 2011-02-10 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings collect invited and contributed papers from more than 150 scientists and engineers worldwide which provide an up-to-date overview of the current research on friction and wear, including new systematic approaches as well as innovative technical solutions.
Download or read book Recent Developments of Electrodeposition Coating written by Andrzej Zieliński and published by MDPI. This book was released on 2021-08-31 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This e-book presents a selection of papers focused on some novel aspects of electrodeposited coatings, in particular for medical applications. The biocoatings applied for surface modification of load-bearing implants are still being developed, especially for titanium implants, for which hundreds and thousands of possible technical solutions have been proposed using different techniques and materials. This book is a collection of papers that demonstrate appropriate attempts using various electrodeposition methods. The specific objectives are different, with several looking for improved bioactivity, another for antibacterial properties, and another for increased adhesion on the helix lines on dental implants. The e-book starts with a paper on the methodic development of electrodes for electrowinning. This is followed by paper on the real performance of the surface of dental implants, a subject not often addressed. The next paper focuses on electro-oxidation: a novel two-stage oxidation method, characteristic of the oxide layer on helix line of a model dental implant, and micro-arc oxidation of 3D printed titanium. The last paper focuses on coatings, describing the carbon nanotubes- (hydroxyapatite, chitosan), Eudragit-, and Fe-containing coatings. The e-book concludes with a review of all electrodeposition methods. It is a collection of papers describing novel results in electrodeposition biocoatings, which will be of interest for many scholars and researchers.
Download or read book Ion Implantation Technology 94 written by S. Coffa and published by Newnes. This book was released on 1995-05-16 with total page 1031 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of these proceedings is to present and stimulate discussion on the many subjects related to ion implantation among a broad mix of specialists from areas as diverse as materials science, device production and advanced ion implanters.The contents open with a paper on the future developments of the microelectronics industry in Europe within the framework of the global competition. The subsequent invited and oral presentations cover in detail the following areas: trends in processing and devices, ion-solid interaction, materials science issues, advanced implanter systms, process control and yield, future trends and applications.
Download or read book Processing Techniques and Tribological Behavior of Composite Materials written by Tyagi, Rajnesh and published by IGI Global. This book was released on 2015-01-31 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: An understanding of friction and wear behavior of materials is crucial in order to improve their performance and durability. New research is providing the opportunity to solve common problems relating to the development of materials, surface modification, coatings, and processing methods across industries. Processing Techniques and Tribological Behavior of Composite Materials provides relevant theoretical frameworks and the latest empirical research findings on the strategic role of composite tribology in a variety of settings. This book is intended for students, researchers, academicians, and professionals working in industries where wear reduction and performance enhancement of machines and machine elements is essential to success.
Download or read book Proceedings of the 2nd International Conference on Surface Metrology written by and published by WPI Surface Metrology Lab. This book was released on 2010 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt:
