Download or read book Friction Stir Casting Modification for Enhanced Structural Efficiency written by Saumyadeep Jana and published by Butterworth-Heinemann. This book was released on 2015-10-21 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction Stir Casting Modification for Enhanced Structural Efficiency: A Volume in the Friction Stir Welding and Processing Book Series summarizes current research and applications of friction stir processing techniques for casting modification. Research in this area has shown significant benefit in terms of fatigue performance as a result of friction stir processing. This book addresses the latest research, providing readers with a summary of these results and new guidelines for designers. Provides the benefits of friction stir casting, including its solid phase process, low distortion of workpiece, good dimensional stability and repeatability, high joint strength, and more Summarizes current research and applications of friction stir processing techniques for casting modification Presents it usage in the production of products such as rugs, wire, or any other gases, and its applications for decreased fuel consumption in light weight aircraft, and its automotive and ship applications

Download or read book Encyclopedia of Aluminum and Its Alloys Two Volume Set Print written by George E. Totten and published by CRC Press. This book was released on 2018-12-07 with total page 2957 pages. Available in PDF, EPUB and Kindle. Book excerpt: This encyclopedia, written by authoritative experts under the guidance of an international panel of key researchers from academia, national laboratories, and industry, is a comprehensive reference covering all major aspects of metallurgical science and engineering of aluminum and its alloys. Topics covered include extractive metallurgy, powder metallurgy (including processing), physical metallurgy, production engineering, corrosion engineering, thermal processing (processes such as metalworking and welding, heat treatment, rolling, casting, hot and cold forming), surface engineering and structure such as crystallography and metallography.

Download or read book Friction Stir Welding and Processing in Alloy Manufacturing written by Carlos Agelet de Saracibar and published by MDPI. This book was released on 2019-08-02 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue Friction Stir Welding and Processing in Alloy Manufacturingthat was published in Metals

Download or read book Additive Manufacturing for the Aerospace Industry written by Francis H. Froes and published by Elsevier. This book was released on 2019-02-15 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing for the Aerospace Industry explores the design, processing, metallurgy and applications of additive manufacturing (AM) within the aerospace industry. The book's editors have assembled an international team of experts who discuss recent developments and the future prospects of additive manufacturing. The work includes a review of the advantages of AM over conventionally subtractive fabrication, including cost considerations. Microstructures and mechanical properties are also presented, along with examples of components fabricated by AM. Readers will find information on a broad range of materials and processes used in additive manufacturing. It is ideal reading for those in academia, government labs, component fabricators, and research institutes, but will also appeal to all sectors of the aerospace industry. Provides information on a broad range of materials and processes used in additive manufacturing Presents recent developments in the design and applications of additive manufacturing specific to the aerospace industry Covers a wide array of materials for use in the additive manufacturing of aerospace parts Discusses current standards in the area of aerospace AM parts

Download or read book Light Metals 2018 written by Olivier Martin and published by Springer. This book was released on 2018-01-31 with total page 1637 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Light Metals symposia at the TMS Annual Meeting & Exhibition present the most recent developments, discoveries, and practices in primary aluminum science and technology. The annual Light Metals volume has become the definitive reference in the field of aluminum production and related light metal technologies. The 2018 collection includes papers from the following symposia: 1.Alumina and Bauxite2.Aluminum Alloys, Processing, and Characterization3.Aluminum Reduction Technology4.Cast Shop Technology5. Cast Shop Technology: Energy Joint Session6. Cast Shop Technology: Fundamentals of Aluminum Alloy Solidification Joint Session7. Cast Shop Technology: Recycling and Sustainability Joint Session8. Electrode Technology for Aluminum Production9. Perfluorocarbon Generation and Emissions from Industrial Processes10. Scandium Extraction and Use in Aluminum Alloys

Download or read book Friction Stir Superplasticity for Unitized Structures written by Zongyi Ma and published by Butterworth-Heinemann. This book was released on 2014-05-27 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamentals and potential applications of ‘friction stir superplasticity for unitized structures’. Conventional superplastic forming of sheets is limited to the thickness of 3 mm because the fine grained starting material is produced by rolling. Friction stir superplasticity has grown rapidly in the last decade because of the effectiveness of microstructural refinement. The thickness of the material remains almost constant, and that allows for forming of thick sheets/plates, which was not possible before. The field has reached a point where designers have opportunities to expand the extent of unitized structures, which are structures in which the traditional primary part and any supporting structures are fabricated as a single unit. With advanced optimization and material considerations, this class of structures can be lighter weight and more efficient, making them less costly, as well as mechanically less complex, reducing areas of possible failure. Discusses how friction stir processing allows selective microstructural refinement without thickness change Demonstrates how higher thickness sheets and plates can be superplastically formed Examples are presented for aluminum, magnesium and titanium alloys Covers the production of low-cost unitized structures by selectively processing cast sheets/plates

Download or read book Friction Stir Welding and Processing written by Rajiv Sharan Mishra and published by Springer. This book was released on 2014-08-04 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book lays out the fundamentals of friction stir welding and processing and builds toward practical perspectives. The authors describe the links between the thermo-mechanical aspects and the microstructural evolution and use of these for the development of the friction stir process as a broader metallurgical tool for microstructural modification and manufacturing. The fundamentals behind the practical aspects of tool design, process parameter selection and weld related defects are discussed. Local microstructural refinement has enabled new concepts of superplastic forming and enhanced low temperature forming. The collection of friction stir based technologies is a versatile set of solid state manufacturing tools.

Download or read book Friction Stir Processing for Enhanced Low Temperature Formability written by Christopher B. Smith and published by Butterworth-Heinemann. This book was released on 2014-03-21 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of friction stir processing to locally modify the microstructure to enhanced formability has the potential to alter the manufacturing of structural shapes. There is enough research to put together a short monograph detailing the fundamentals and key findings. One example of conventional manufacturing technique for aluminum alloys involves fusion welding of 5XXX series alloys. This can be replaced by friction stir welding, friction stir processing and forming. A major advantage of this switch is the enhanced properties. However qualification of any new process involves a series of tests to prove that material properties of interest in the friction stir welded or processed regions meet or exceed those of the fusion welded region (conventional approach). This book will provide a case study of Al5083 alloy with some additional examples of high strength aluminum alloys. Demonstrates how friction stir processing enabled forming can expand the design space by using thick sheet/plate for applications where pieces are joined because of lack of formability Opens up new method for manufacturing of structural shapes Shows how the process has the potential to lower the cost of a finished structure and enhance the design allowables

Download or read book Modern Surface Engineering Treatments written by Mahmood Aliofkhazraei and published by BoD – Books on Demand. This book was released on 2013-05-22 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface engineering can be defined as an enabling technology used in a wide range of industrial activities. Surface engineering was founded by detecting surface features which destroy most of pieces, e.g. abrasion, corrosion, fatigue, and disruption; then it was recognized, more than ever, that most technological advancements are constrained with surface requirements. In a wide range of industry (such as gas and oil exploitation, mining, and manufacturing), the surfaces generate an important problem in technological advancement. Passing time shows us new interesting methods in surface engineering. These methods usually apply to enhance the surface properties, e.g. wear rate, fatigue, abrasion, and corrosion resistance. This book collects some of new methods in surface engineering.

Download or read book Friction Stir Welding and Processing written by Sandeep Rathee and published by John Wiley & Sons. This book was released on 2024-03-25 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: A single source of information on the fundamental concepts and latest research applications of friction stir welding and processing Friction Stir Welding and Processing: Fundamentals to Advancements provides concise yet comprehensive coverage of the field of friction stir welding, with an eye toward future research directions and applications. Throughout the book, case studies provide real-world context and highlight applications for various engineering sectors. With contributions from an array of leaders in the field, Friction Stir Welding and Processing provides readers with a single source of information on all aspects of FSW and FSP. After explaining the fundamentals of friction stir welding (FSW) and its variants, the book discusses composite fabrication techniques using friction stir processing (FSP). Different types of friction techniques are covered, as is the equipment used. Detailed characterization of samples and composites are included. Additional topics discussed include the impact of FSW on the economics of production, methods for coupling FSW/FSP with additive manufacturing, composite fabrication, and process-property relationships. Master the basic concepts of friction stir welding and its variants Discover the role of FSW in developing hybrid manufacturing techniques Follow case studies that connect theoretical concepts to real-world experimental results Learn from contributions from an array of global thought leaders in the field This is a valuable compendium on the topic for engineers and designers who utilize welding and advanced manufacturing across industries, as well as graduate students and post-graduate researchers who are exploring new friction stir welding applications.

Download or read book Advanced Joining Processes written by Lucas F. M. da Silva and published by Springer Nature. This book was released on 2020-03-31 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent material science-based and mechanical analysis-based advances in joining processes. It includes all related processes, e.g. friction stir welding, joining by plastic deformation, laser welding, clinch joining, and adhesive bonding, as well as hybrid joints. It gathers selected full-length papers from the 1st Conference on Advanced Joining Processes.

Download or read book Friction Stir Welding and Processing VI written by Rajiv S. Mishra and published by John Wiley & Sons. This book was released on 2011-04-12 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction stir welding has seen significant growth in both technology implementation and scientific exploration. This book covers all aspects of friction stir welding and processing, from fundamentals to design and applications. It also includes an update on the current research issues in the field of friction stir welding and a guide for further research.

Download or read book Friction Stir Welding and Processing written by Rajiv S. Mishra and published by ASM International. This book was released on 2007-01-01 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the rapidly growing area of friction stir welding. It also addresses the use of the technology for other types of materials processing, including superplastic forming, casting modification, and surface treatments. The book has been prepared to serve as the first general reference on friction stir technology,. Information is provided on tools, machines, process modeling, material flow, microstructural development and properties. Materials addressed include aluminum alloys, titanium alloys, steels, nickel-base alloys, and copper alloys. The chapters have been written by the leading experts in this field, representing leading industrial companies and university and government research insititutions.

Download or read book The Effect of Friction Stir Processing on the Microstructure and Tensile Behavior of Aluminum Alloys written by Nelson Gomes Affonseca (Netto) and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction Stir Processing (FSP) is a promising thermomechanical technique that is used to modify the microstructure of metals locally, and thereby locally improve mechanical properties of the material. FSP uses a simple and inexpensive tool, and has been shown to eliminate pores and also reduce the sizes of intermetallics in aluminum alloys. This is of great interest for research on solidification, production and performance of aluminum alloy castings because FSP can enhance the structural quality of aluminum casting significantly by minimizing the effect of those structural defects. In the literature, there is evidence that the effectiveness of FSP can change with tool wear of the tool used. Therefore, a study was first conducted to determine the effect of FSP time on the tool life and wear in 6061-T6 extrusions. Results showed the presence of two distinct phases in the tool life and wear. Metallographic analyses confirmed that wear in Phase I was due to fracture of the threads of the tool and Phase II was due to regular wear, mostly without fracture. Moreover, built-up layers of aluminum were observed between threads. The microhardness profile was found to be different from those reported in the literature for 6061-T6, with Vickers hardness increasing continuously from the the stir zone to the base material. To investigate the degree of effectiveness of FSP in improving the structural quality of cast A356 alloys, ingots with different quality (high and low) were friction strir processed with single and multiple passes. Analysis of tensile test results and work hardening characteristics showed that for the high quality ingot, a single pass was sufficient to eliminate the structural defects. Subsequent FSP passes had no effect on the work hardening characteristics. In contrast, tensile results and work hardening characteristics improved with every pass for the low quality ingot, indicating that the effectiveness of FSP was dependent on the initial quality of the metal. The evolution of microstructure, specifically the size and spacing of Silicon (Si) eutectic particles, was investigated after friction stir processing of high quality A356 castings with single and multiple passes. Si particles were found to coarsen with each pass, which was in contrast with previous findings in the literature. The nearest neighbor distance of Si particles also increased with each FSP pass, indicating that microstructure became progressively more homogeneous after each pass. In the literature, the improvement observed after FSP of Al-Si cast alloys was attributed to the refinement of Si particles. Tensile data from high quality A356 ingot showed that there was no correlation between the size of Si particles and ductility. To the author's knowledge, this is the first time that the absence of a correlation between Si particle size and ductility has been found.

Download or read book Light Metals 2022 written by Dmitry Eskin and published by Springer Nature. This book was released on 2022-02-05 with total page 1088 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Light Metals symposia at the TMS Annual Meeting & Exhibition present the most recent developments, discoveries, and practices in primary aluminum science and technology. The annual Light Metals volume has become the definitive reference in the field of aluminum production and related light metal technologies. The 2022 collection includes contributions from the following symposia: • Alumina and Bauxite • Aluminum Alloys, Processing and Characterization • Aluminum Reduction Technology • Aluminum Reduction Technology Joint Session with REWAS: Decarbonizing the Metals Industry • Cast Shop Technology • Electrode Technology for Aluminum Production • Primary Aluminum Industry—Energy and Emission Reductions: An LMD Symposium in Honor of Halvor Kvande • Recycling and Sustainability in Cast Shop Technology: Joint Session with REWAS 2022

Download or read book Metal Matrix Composites by Friction Stir Processing written by Ranjit Bauri and published by Butterworth-Heinemann. This book was released on 2017-08-10 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Matrix Composites by Friction Stir Processing discusses the capabilities of utilizing friction stir processing (FSP) as a tool to manufacture new materials, such as composites. FSP is considered a tool for grain refinement. However, this work illustrates how FSP has a wider capability due to the material flow and mixing the process offers. This book highlights such aspects by demonstrating the ability of the process to incorporate a second phase and make metal matrix composites (MMCs). The book covers the current research on processing MMCs by FSP, and presents a novel approach of making ductile MMCs by FSP using metal particle reinforcements. Demonstrates how friction stir processing can be used to make metal matrix composites Includes a review of different approaches of making metal matrix composites by friction stir processing Demonstrates the utility of friction stir processing in making new types of non-equilibrium ductile composites Provides a comparison of properties of friction stir processed composites to those of conventional metal matrix composites

Download or read book Casting and Solidification of Light Alloys written by Alexander Vorozhtsov and published by MDPI. This book was released on 2020-12-15 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Investigation of the effect of casting and crystallization on the structure and properties of the resulting light alloys and, in particular, research connected with detailed analysis of the microstructure of light alloys obtained using various external influences of ultrasonic, vibration, magnetic, and mechanical processing on the casting and crystallization are discussed. Research on the study of introduction of additives (modifiers, reinforcers, including nanosized ones, etc.) into the melt during the crystallization process, the technological properties of casting (fluidity, segregation, shrinkage, etc.), the structure and physicomechanical properties of light alloys are also included.