Download or read book Friction and Mechanical Characterization on Nanoscale Using Atomic friction Force Microscopy written by Ashok V. Kulkarni and published by . This book was released on 1996 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Friction and Wear on the Nanoscale written by Enrico Gnecco and published by Springer. This book was released on 2014-11-05 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an updated review on the development of scanning probe microscopy and related techniques, and the availability of computational techniques not even imaginable a few decades ago. The 36 chapters cover instrumental aspects, theoretical models and selected experimental results, thus offering a broad panoramic view on fundamental issues in nanotribology which are currently being investigated. Compared to the first edition, several topics have been added, including triboluminescence, graphene mechanics, friction and wear in liquid environments, capillary condensation, and multiscale friction modeling. Particular care has been taken to avoid overlaps and guarantee the independence of the chapters. In this way, our book aims to become a key reference on this subject for the next five to ten years to come.
Download or read book Fundamentals of Friction and Wear written by Enrico Gnecco and published by Springer Science & Business Media. This book was released on 2007-05-26 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: Readers of this book will become familiar with the concepts and techniques of nanotribology, explained by an international team of scientists and engineers, actively involved and with long experience in this field. Edited by two pioneers in the field, the book is suitable both as a first introduction to this fascinating subject, and also as a reference for researchers wishing to improve their knowledge of nanotribology.
Download or read book Sliding Friction at the Nanoscale written by Antoine Laine and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this manuscript, we use methodes inherited from Atomic Force Microscopy in order to measure the nanoscale mechanical response of different systems. The focus is put on highlighting the frictional response and dissipation mechanisms taking place at the single asperity level, where soft and hard condensed matter meet.We first present the development of a new experimental tool allowing nanorheology and nanotribology measurement in controlled environment. The study of mechanical properties of nanoconfined RTILs with this apparatus revealed the glassy nature of these dense electrolytes at metallic interfaces.We then study the dissipation phenomena at the ultimate scale for metallic nanojunctions made of a few atoms. The absence of defects rationalizes their unexpected mechanical properties in striking difference with the macroscopic realm.In fine, we focus on the dynamics of a metallic interface made of a few atoms and develop new experimental strategies to probe the frictional response of the interface under harmonic applied stress. Our measurements are quantitatively reproduced numerically and reveal an atomic-scale quantized slip friction mechanism.
Download or read book Characterization and Modification of Graphene Based Interfacial Mechanical Behavior written by Guorui Wang and published by Springer Nature. This book was released on 2020-08-21 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis shares new findings on the interfacial mechanics of graphene-based materials interacting with rigid/soft substrate and with one another. It presents an experimental platform including various loading modes that allow nanoscale deformation of atomically thin films, and a combination of atomic force microscopy (AFM) and Raman spectroscopy that allows both displacement and strain to be precisely measured at microscale. The thesis argues that the rich interfacial behaviors of graphene are dominated by weak van der Waals force, which can be effectively modulated using chemical strategies. The continuum theories are demonstrated to be applicable to nano-mechanics and can be used to predict key parameters such as shear/friction and adhesion. Addressing key interfacial mechanics issues, the findings in thesis not only offer quantitative insights in the novel features of friction and adhesion to be found only at nanoscale, but will also facilitate the deterministic design of high-performance graphene-based nanodevices and nanocomposites.
Download or read book Elements of Friction Theory and Nanotribology written by Enrico Gnecco and published by Cambridge University Press. This book was released on 2015-04-30 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combining the classical theories of contact mechanics and lubrication with the study of friction on the nanometer range, this multi-scale book for researchers and students alike guides the reader deftly through the mechanisms governing friction processes, based on state-of-the-art models and experimental results. The first book in the field to incorporate recent research on nanotribology with classical theories of contact mechanics, this unique text explores atomic scale scratches, non-contact friction and fishing of molecular nanowires as observed in the lab. Beginning with simple key concepts, the reader is guided through progressively more complex topics, such as contact of self-affine surfaces and nanomanipulation, in a consistent style, encompassing both macroscopic and atomistic descriptions of friction, and using unified notations to enable use by physicists and engineers across the scientific community.
Download or read book Handbook of Micro Nano Tribology written by Bharat Bushan and published by CRC Press. This book was released on 2020-10-28 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of Handbook of Micro/Nanotribology addresses the rapid evolution within this field, serving as a reference for the novice and the expert alike. Two parts divide this handbook: Part I covers basic studies, and Part II addresses design, construction, and applications to magnetic storage devices and MEMS. Discussions include: surface physics and methods for physically and chemically characterizing solid surfaces roughness characterization and static contact models using fractal analysis sliding at the interface and friction on an atomic scale scratching and wear as a result of sliding nanofabrication/nanomachining as well as nano/picoindentation lubricants for minimizing friction and wear surface forces and microrheology of thin liquid films measurement of nanomechanical properties of surfaces and thin films atomic-scale simulations of interfacial phenomena micro/nanotribology and micro/nanomechanics of magnetic storage devices This comprehensive book contains 16 chapters contributed by more than 20 international researchers. In each chapter, the presentation starts with macroconcepts and then lead to microconcepts. With more than 500 illustrations and 50 tables, Handbook of Micro/Nanotribology covers the range of relevant topics, including characterization of solid surfaces, measurement techniques and applications, and theoretical modeling of interfaces. What's New in the Second Edition? New chapters on: AFM instrumentation Surface forces and adhesion Design and construction of magnetic storage devices Microdynamical devices and systems Mechanical properties of materials in microstructure Micro/nanotribology and micro/nanomechanics of MEMS devices
Download or read book Nanoscience Friction And Rheology On The Nanometer Scale written by Ernst Meyer and published by World Scientific. This book was released on 1998-12-30 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction force microscopy is an important analytical tool in the field of tribology on the nanometer-scale. The contact area between the probing tip and the sample is reduced to some square nanometers, corresponding to the ideal of a single asperity contact. Traditional concepts, such as friction coefficients, adhesion and elasticity and stick-slip are re-examined with this novel technique. New concepts based upon classical and quantum mechanics are investigated.
Download or read book Nanotribology and Nanomechanics written by Bharat Bhushan and published by Springer. This book was released on 2017-04-05 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook and comprehensive reference source and serves as a timely, practical introduction to the principles of nanotribology and nanomechanics. This 4th edition has been completely revised and updated, concentrating on the key measurement techniques, their applications, and theoretical modeling of interfaces. It provides condensed knowledge of the field from the mechanics and materials science perspectives to graduate students, research workers, and practicing engineers.
Download or read book Fundamentals Of Tribology Third Edition written by Ramsey Gohar and published by World Scientific. This book was released on 2018-07-17 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Tribology deals with the fundamentals of lubrication, friction and wear, as well as mechanics of contacting surfaces and their topography. It begins by introducing the reader to the importance of tribology in everyday life and offers a brief history of the subject. It then describes the nature of rough surfaces and the mechanics of contacting elastic solids and their deformation under load and friction in their relative motion. The book goes on to discuss the importance of lubricant rheology with respect to viscosity and density. Then, the principles of hydrodynamic lubrication are covered with derivations of the governing Reynolds and energy equations. Applications of hydrodynamic lubrication in various forms of bearings — journal bearings, thrust bearings and externally pressurised bearings — are outlined. The important and still evolving subject of elastohydrodynamic lubrication is treated in some detail, both at its fundamentals and its applications in thin shell or overlay bearings, cam-followers and internal combustion engine pistons.The fundamentals of biotribology are also covered, particularly its applications to endo-articular mammalian joints such as hip and knee joints and their arthroplasty. In addition, there is a treatment of the rapidly emerging knowledge of tribological phenomena in lightly loaded vanishing conjunctions (nanotribology), in natural systems and very small devices, such as MEMS and high density data storage media. There is also a new chapter on the rapidly emerging subject of surface texturing to promote retention of microreservoirs of lubricant, acting as microbearings and improving lubrication of otherwise poorly lubricated conjunctions.This book targets the undergraduate and postgraduate body as well as engineering professionals in industry, where often a quick solution or understanding of certain tribological fundamentals is sought. The book can also form an initial basis for those interested in research into certain aspects of tribology.
Download or read book Micro and Nanoscale Phenomena in Tribology written by Yip-Wah Chung and published by CRC Press. This book was released on 2011-10-19 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawn from presentations at a recent National Science Foundation Summer Institute on Nanomechanics, Nanomaterials, and Micro/Nanomanufacturing, Micro- and Nanoscale Phenomena in Tribology explores the convergence of the multiple science and engineering disciplines involved in tribology and the connection from the macro to nano world. Written by specialists from computation, materials science, mechanical engineering, surface physics, and chemistry, each chapter provides up-to-date coverage of both basic and advanced topics and includes extensive references for further study. After discussing the evolution of tribology in the micro and nano world, the book describes contact conditions spanning between macroscale and nanoscale contacts. It presents an overview of fundamental continuum treatments of interfacial contact and lubrication under a wide range of conditions, including novel advances in contact simulation. It also gives a thorough account of the nature of surface energies and forces in nanostructures as well as adhesion in dry and wet environments. The book then explains how to perform friction measurements at the nanoscale and interpret friction data before demonstrating how micro- and nanotextured surfaces affect adhesion, friction, and wetting. The final chapters emphasize the importance of surface chemistry and molecular dynamics simulation in tribology. With numerous examples and figures throughout, this volume presents a thorough account of important advancements in tribology that offer insight into micro- and nanoscale phenomena. By enabling a better understanding of fundamental micro- and nanoscale interactions, the book helps readers effectively design and fabricate durable tribological components for various engineering and biological systems.
Download or read book Friction Wear and Mechanical Behavior of Nano objects on the Nanoscale written by Dave Maharaj and published by . This book was released on 2015 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nano-objects have been investigated for applications that include drug delivery for cancer treatment, oil detection, contaminant removal, catalysis, and tribology on the macro- to nanoscale. In some applications, they are subjected to friction and deformation during contact with each other and the surfaces on which they are used. Pioneering studies are performed to gain a fundamental understanding of friction and wear of nano-objects, their mechanical properties and the deformation mechanisms. These unique set of studies examined friction mechanisms in single and multiple nano-object contact sliding on a surface in dry and submerged in liquid environments and sliding on a single nano-object. Mechanical behavior is also investigated. The nano-object contact and friction studies are done using an atomic force microscope (AFM). Single nano-object contact studies, where nano-objects are pushed laterally, provides understanding of friction mechanisms of nano-objects sliding on surfaces. Results of experiments done for the first time, show friction is influenced by real area of contact, roughness, work of adhesion and viscosity of liquids. Friction is lower in liquid environments compared to dry environments. Multiple nano-object contact studies investigate the ability of several nano-objects to reduce friction and wear between sliding surfaces as a result of lower real area of contact. Further studies on friction, sliding on a single nano-object, reveals a dependence on topography, scale and material. Studies are done on local deformation (indentation) and global deformation (compression) with a sharp tip and flat punch respectively to understand mechanical behavior and are reported for the first time. Local deformation studies allow for investigation of scale effects on mechanical properties. Global deformation studies investigate the occurrence of reverse plasticity and resistance to deformation due to repeat loading. In this thesis the results of these studies are presented to help understand fundamental interfacial interactions and deformation mechanisms. Studies reported use gold (Au) nanoparticles (NPs) and nanorods (NRs), molybdenum disulfide (MoS2) and tungsten disulfide (WS2) multi-walled nanotubes (MWNTs) and carbon nanohorns (CNHs). These nano-objects were selected to determine methodology and trends, which guide in the selection of nano-objects for various applications.
Download or read book Fundamentals of Friction and Wear written by Enrico Gnecco and published by Springer. This book was released on 2006-11-28 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: Readers of this book will become familiar with the concepts and techniques of nanotribology, explained by an international team of scientists and engineers, actively involved and with long experience in this field. Edited by two pioneers in the field, the book is suitable both as a first introduction to this fascinating subject, and also as a reference for researchers wishing to improve their knowledge of nanotribology.
Download or read book Nanotribology and Nanomechanics II written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2011-05-30 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: The comprehensive reference and textbook serves as a timely, practical introduction to the principles of nanotribology and nanomechanics. Assuming some familiarity with macroscopic tribology, the book comprises chapters by internationally recognized experts, who integrate knowledge of the field from the mechanics and materials-science perspectives. They cover key measurement techniques, their applications, and theoretical modelling of interfaces, each beginning their contributions with macro- and progressing to microconcepts.
Download or read book Fundamentals of Friction written by I.L. Singer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Friction, unlike many books on tribology, is devoted to one specific topic: friction. After introductory chapters on scientific and engineering perspectives, the next section contains the necessary background within the areas of contact mechanics, surfaces and adhesion. Then on to fracture, deformation and interface shear, from the macroscopic behavior of materials in frictional contact to microscopic models of uniform and granular interfaces. Lubrication by solids, liquids and gases is presented next, from classical flow properties to the reorganization of monolayers of molecules under normal and shear stresses. A section on new approaches at the nano- and atomic scales covers the physics and chemistry of interfaces, an array of visually exciting simulations, using molecular dynamics, of solids and liquids in sliding contact, and related AFM/STM studies. Following a section on machines and measurements, the final chapter discusses future issues in friction.
Download or read book Springer Handbook of Nanotechnology written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2010-04-23 with total page 1968 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 2004 and with the 2nd edition in 2006, the Springer Handbook of Nanotechnology has established itself as the definitive reference in the nanoscience and nanotechnology area. It integrates the knowledge from nanofabrication, nanodevices, nanomechanics, Nanotribology, materials science, and reliability engineering in just one volume. Beside the presentation of nanostructures, micro/nanofabrication, and micro/nanodevices, special emphasis is on scanning probe microscopy, nanotribology and nanomechanics, molecularly thick films, industrial applications and microdevice reliability, and on social aspects. In its 3rd edition, the book grew from 8 to 9 parts now including a part with chapters on biomimetics. More information is added to such fields as bionanotechnology, nanorobotics, and (bio)MEMS/NEMS, bio/nanotribology and bio/nanomechanics. The book is organized by an experienced editor with a universal knowledge and written by an international team of over 150 distinguished experts. It addresses mechanical and electrical engineers, materials scientists, physicists and chemists who work either in the nano area or in a field that is or will be influenced by this new key technology.
Download or read book Atomic Force Microscopy Based Nanorobotics written by Hui Xie and published by Springer. This book was released on 2011-09-25 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The atomic force microscope (AFM) has been successfully used to perform nanorobotic manipulation operations on nanoscale entities such as particles, nanotubes, nanowires, nanocrystals, and DNA since 1990s. There have been many progress on modeling, imaging, teleoperated or automated control, human-machine interfacing, instrumentation, and applications of AFM based nanorobotic manipulation systems in literature. This book aims to include all of such state-of-the-art progress in an organized, structured, and detailed manner as a reference book and also potentially a textbook in nanorobotics and any other nanoscale dynamics, systems and controls related research and education. Clearly written and well-organized, this text introduces designs and prototypes of the nanorobotic systems in detail with innovative principles of three-dimensional manipulation force microscopy and parallel imaging/manipulation force microscopy.
