Download or read book RF and Microwave Applications and Systems written by Mike Golio and published by CRC Press. This book was released on 2018-10-03 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, RF and Microwave Applications and Systems, includes a wide range of articles that discuss RF and microwave systems used for communication and radar and heating applications. Commercial, avionics, medical, and military applications are addressed. An overview of commercial communications systems is provided. Past, current, and emerging cellular systems, navigation systems, and satellite-based systems are discussed. Specific voice and data commercial systems are investigated more thoroughly in individual chapters that follow. Detailed discussions of military electronics, avionics, and radar (both military and automotive) are provided in separate chapters. A chapter focusing on FR/microwave energy used for therapeutic medicine is also provided. Systems considerations including thermal, mechanical, reliability, power management, and safety are discussed in separate chapters. Engineering processes are also explored in articles about corporate initiatives, cost modeling, and design reviews. The book closes with a discussion of the underlying physics of electromagnetic propagation and interference. In addition to new chapters on WiMAX and broadband cable, nearly every existing chapter features extensive updates and several were completely rewritten to reflect the massive changes areas such as radio navigation and electronic warfare.

Download or read book RF and Microwave Circuits Measurements and Modeling written by Mike Golio and published by CRC Press. This book was released on 2018-10-08 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlighting the challenges RF and microwave circuit designers face in their day-to-day tasks, RF and Microwave Circuits, Measurements, and Modeling explores RF and microwave circuit designs in terms of performance and critical design specifications. The book discusses transmitters and receivers first in terms of functional circuit block and then examines each block individually. Separate articles consider fundamental amplifier issues, low noise amplifiers, power amplifiers for handset applications and high power, power amplifiers. Additional chapters cover other circuit functions including oscillators, mixers, modulators, phase locked loops, filters and multiplexers. New chapters discuss high-power PAs, bit error rate testing, and nonlinear modeling of heterojunction bipolar transistors, while other chapters feature new and updated material that reflects recent progress in such areas as high-volume testing, transmitters and receivers, and CAD tools. The unique behavior and requirements associated with RF and microwave systems establishes a need for unique and complex models and simulation tools. The required toolset for a microwave circuit designer includes unique device models, both 2D and 3D electromagnetic simulators, as well as frequency domain based small signal and large signal circuit and system simulators. This unique suite of tools requires a design procedure that is also distinctive. This book examines not only the distinct design tools of the microwave circuit designer, but also the design procedures that must be followed to use them effectively.

Download or read book The Engineering Handbook written by Richard C. Dorf and published by CRC Press. This book was released on 2018-10-03 with total page 3080 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1995, The Engineering Handbook quickly became the definitive engineering reference. Although it remains a bestseller, the many advances realized in traditional engineering fields along with the emergence and rapid growth of fields such as biomedical engineering, computer engineering, and nanotechnology mean that the time has come to bring this standard-setting reference up to date. New in the Second Edition 19 completely new chapters addressing important topics in bioinstrumentation, control systems, nanotechnology, image and signal processing, electronics, environmental systems, structural systems 131 chapters fully revised and updated Expanded lists of engineering associations and societies The Engineering Handbook, Second Edition is designed to enlighten experts in areas outside their own specialties, to refresh the knowledge of mature practitioners, and to educate engineering novices. Whether you work in industry, government, or academia, this is simply the best, most useful engineering reference you can have in your personal, office, or institutional library.

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The RF and Microwave Handbook 3 Volume Set written by Mike Golio and published by CRC Press. This book was released on 2018-10-08 with total page 2208 pages. Available in PDF, EPUB and Kindle. Book excerpt: By 1990 the wireless revolution had begun. In late 2000, Mike Golio gave the world a significant tool to use in this revolution: The RF and Microwave Handbook. Since then, wireless technology spread across the globe with unprecedented speed, fueled by 3G and 4G mobile technology and the proliferation of wireless LANs. Updated to reflect this tremendous growth, the second edition of this widely embraced, bestselling handbook divides its coverage conveniently into a set of three books, each focused on a particular aspect of the technology. Six new chapters cover WiMAX, broadband cable, bit error ratio (BER) testing, high-power PAs (power amplifiers), heterojunction bipolar transistors (HBTs), as well as an overview of microwave engineering. Over 100 contributors, with diverse backgrounds in academic, industrial, government, manufacturing, design, and research reflect the breadth and depth of the field. This eclectic mix of contributors ensures that the coverage balances fundamental technical issues with the important business and marketing constraints that define commercial RF and microwave engineering. Focused chapters filled with formulas, charts, graphs, diagrams, and tables make the information easy to locate and apply to practical cases. The new format, three tightly focused volumes, provides not only increased information but also ease of use. You can find the information you need quickly, without wading through material you don’t immediately need, giving you access to the caliber of data you have come to expect in a much more user-friendly format.

Download or read book RF and Microwave Passive and Active Technologies written by Mike Golio and published by CRC Press. This book was released on 2018-10-03 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the high frequency world, the passive technologies required to realize RF and microwave functionality present distinctive challenges. SAW filters, dielectric resonators, MEMS, and waveguide do not have counterparts in the low frequency or digital environment. Even when conventional lumped components can be used in high frequency applications, their behavior does not resemble that observed at lower frequencies. RF and Microwave Passive and Active Technologies provides detailed information about a wide range of component technologies used in modern RF and microwave systems. Updated chapters include new material on such technologies as MEMS, device packaging, surface acoustic wave (SAW) filters, bipolar junction and heterojunction transistors, and high mobility electron transistors (HMETs). The book also features a completely rewritten section on wide bandgap transistors.

Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 2092 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Capacitive Silicon Resonators written by Nguyen Van Toan and published by CRC Press. This book was released on 2019-07-10 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfabricated resonators play an essential role in a variety of applications, including mass sensing, timing reference applications, and filtering applications. Many transduction mechanisms including piezoelectric, piezoresistive, and capacitive mechanisms, have been studied to induce and detect the motion of resonators. This book is meant to introduce and suggest several technological approaches together with design considerations for performance enhancement of capacitive silicon resonators, and will be useful for those working in field of micro and nanotechnology. Features Introduces and suggests several technological approaches together with design considerations for performance enhancement of capacitive silicon resonators Provides information on the various fabrication technologies and design considerations that can be employed to improve the performance capacitive silicon resonator which is one of the promising options to replace the quartz crystal resonator. Discusses several technological approaches including hermetic packaging based on the LTCC substrate, deep reactive ion etching, neutral beam etching technology, and metal-assisted chemical etching, as well as design considerations for mechanically coupled, selective vibration of high-order mode, movable electrode structures, and piezoresistive heat engines were investigated to achieve small motional resistance, low insertion loss, and high quality factor. Focusses on a capacitive sensing method based on the measurement of the change in capacitance between a sensing electrode and the resonant body. Reviews recent progress in performance enhancement methods for capacitive silicon resonator, which are mainly based on the works of the authors.

Download or read book The RF and Microwave Handbook written by John Michael Golio and published by . This book was released on 2008 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microwave Journal written by and published by . This book was released on 2007 with total page 1400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microwave Filters Impedance matching Networks and Coupling Structures written by George L. Matthaei and published by . This book was released on 1964 with total page 1134 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Fiber Optic Communications written by Rongqing Hui and published by Academic Press. This book was released on 2019-06-13 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Fiber-Optic Communications provides students with the most up-to-date, comprehensive coverage of modern optical fiber communications and applications, striking a fine balance between theory and practice that avoids excessive mathematics and derivations. Unlike other textbooks currently available, this book covers all of the important recent technologies and developments in the field, including electro-optic modulators, coherent optical systems, and silicon integrated photonic circuits. Filled with practical, relevant worked examples and exercise problems, the book presents complete coverage of the topics that optical and communications engineering students need to be successful. From principles of optical and optoelectronic components, to optical transmission system design, and from conventional optical fiber links, to more useful optical communication systems with advanced modulation formats and high-speed DSP, this book covers the necessities on the topic, even including today's important application areas of passive optical networks, datacenters and optical interconnections.

Download or read book Piezoelectric Energy Harvesting written by Alper Erturk and published by John Wiley & Sons. This book was released on 2011-04-04 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transformation of vibrations into electric energy through the use of piezoelectric devices is an exciting and rapidly developing area of research with a widening range of applications constantly materialising. With Piezoelectric Energy Harvesting, world-leading researchers provide a timely and comprehensive coverage of the electromechanical modelling and applications of piezoelectric energy harvesters. They present principal modelling approaches, synthesizing fundamental material related to mechanical, aerospace, civil, electrical and materials engineering disciplines for vibration-based energy harvesting using piezoelectric transduction. Piezoelectric Energy Harvesting provides the first comprehensive treatment of distributed-parameter electromechanical modelling for piezoelectric energy harvesting with extensive case studies including experimental validations, and is the first book to address modelling of various forms of excitation in piezoelectric energy harvesting, ranging from airflow excitation to moving loads, thus ensuring its relevance to engineers in fields as disparate as aerospace engineering and civil engineering. Coverage includes: Analytical and approximate analytical distributed-parameter electromechanical models with illustrative theoretical case studies as well as extensive experimental validations Several problems of piezoelectric energy harvesting ranging from simple harmonic excitation to random vibrations Details of introducing and modelling piezoelectric coupling for various problems Modelling and exploiting nonlinear dynamics for performance enhancement, supported with experimental verifications Applications ranging from moving load excitation of slender bridges to airflow excitation of aeroelastic sections A review of standard nonlinear energy harvesting circuits with modelling aspects.

Download or read book Index to IEEE Publications written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1998 with total page 1270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues for 1973- cover the entire IEEE technical literature.

Download or read book 2019 International Topical Meeting on Microwave Photonics MWP written by IEEE Staff and published by . This book was released on 2019-10-07 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave photonics (MWP) is concerned with the use of photonic devices, systems and techniques for applications in microwave, millimetre wave, and THz wave engineering, and also encompasses the development of high speed photonic components for microwave system applications The field is continuing to experience significant growth, fuelled by the recent interest and development in integrated microwave photonics and microwave millimetre wave photonics for 5G applications and beyond Topics include (but are not limited to) High speed optoelectronic devices Integrated microwave photonics Photonic techniques for microwave signal generation and distribution Photonic microwave processing, sensing, and measurements THz techniques and applications Radio over fiber techniques, fiber wireless communications, and 5G Innovative applications of microwave photonics (astronomy, traffic and automotive, electronic warfare, radar, medicine and health care, etc )

Download or read book Encyclopedia of Optical and Photonic Engineering Print Five Volume Set written by Craig Hoffman and published by CRC Press. This book was released on 2015-09-22 with total page 3726 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of the Encyclopedia of Optical and Photonic Engineering provided a valuable reference concerning devices or systems that generate, transmit, measure, or detect light, and to a lesser degree, the basic interaction of light and matter. This Second Edition not only reflects the changes in optical and photonic engineering that have occurred since the first edition was published, but also: Boasts a wealth of new material, expanding the encyclopedia’s length by 25 percent Contains extensive updates, with significant revisions made throughout the text Features contributions from engineers and scientists leading the fields of optics and photonics today With the addition of a second editor, the Encyclopedia of Optical and Photonic Engineering, Second Edition offers a balanced and up-to-date look at the fundamentals of a diverse portfolio of technologies and discoveries in areas ranging from x-ray optics to photon entanglement and beyond. This edition’s release corresponds nicely with the United Nations General Assembly’s declaration of 2015 as the International Year of Light, working in tandem to raise awareness about light’s important role in the modern world. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]

Download or read book Photonic Microresonator Research and Applications written by Ioannis Chremmos and published by Springer. This book was released on 2010-06-09 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology surrounding the design and fabrication of optical microresonators has matured to a point where there is a need for commercialization. Consequently, there is a need for device research involving more advanced architectures and more esoteric operating principles. Photonic Microresonator Research and Applications explores advances in the fabrication process that enable nanometer waveguide separations, exceptionally smooth surfaces essential to reach Q factors in the order of 106- 108 and high index contrast materials.