Download or read book Fracture Mechanics and Subcritical Crack Growth Approach to Model Time dependent Failure in Brittle Rock written by Mikael Rinne and published by . This book was released on 2008 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tiivistelmä (1 s.).
Download or read book Time Dependent Crack Growth in Brittle Rocks and Field Applications to Geologic Hazards written by Ji Soo Lee and published by . This book was released on 2008 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary focus of this research is to evaluate the time-dependent crack growth in rocks using lab tests and numerical modeling and its application to geologic hazard problems. This research utilized Coconino sandstone and Columbia granite as the study materials and produced the subcritical crack growth parameters in both mode I and II loadings using the rock materials. The mode I loading test employs three different types of fracture mechanics tests: the Double Torsion (DT), the Wedge Splitting (WS), and the Double Cantilever Beam (DCB) test. Each test measured the mode I crack velocity. The DT test indirectly measured the crack velocity using the load relaxation method. The WS and DCB tests directly measured the crack velocity by monitoring using a video recording. The different mode I subcritical crack growth parameters obtained from the three tests are discussed. For the mode II loading test, this study developed a new shear fracture toughness test called the modified Punch-Through Shear (MPTS). The MPTS test conducted at different loading rates produced the mode II subcritical crack growth parameters. These fracture mechanics tests were calibrated and simulated using the distinct element method (DEM) and the finite element method (FEM). DEM analysis employed the particle flow code (PFC) to simulate the mixed mode crack growth and to match with the failure strength envelop of the triaxial compressive tests. FEManalysis employed the Phase2 program to analyze the crack tip stress distribution and the FRANC2D program to calculate the modes I and II stress intensity factors. The fracture mechanics tests and numerical modeling showed well the dependency of the mode II subcritical crack growth parameters according to confining pressure, loading rate, and the mode II fracture toughness. Finally, the UDEC modeling based on DEM is utilized in this study to forecast the long-term stability of the Coconino rock slope, as one of geologic hazards. The fracture mechanics approach is implemented in the program using the modes I and II subcritical crack growth parameters obtained from the lab tests and numerical modeling. Considering the progressive failure of rock bridges due to subcritical crack growth, the UDEC results predicted the stable condition of the Coconino rock cliff over 10,000 years. This result was validated by comparing it with the previous planar failure case.
Download or read book Fracture Mechanics of Rock written by Barry Kean Atkinson and published by Elsevier. This book was released on 2015-05-11 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: The analysis of crack problems through fracture mechanics has been applied to the study of materials such as glass, metals and ceramics because relatively simple fracture criteria describe the failure of these materials. The increased attention paid to experimental rock fracture mechanics has led to major contributions to the solving of geophysical problems. The text presents a concise treatment of the physics and mathematics of a representative selection of problems from areas such as earthquake mechanics and prediction, hydraulic fracturing, hot dry rock geothermal energy, fault mechanics, and dynamic fragmentation.
Download or read book Fracture Mechanics of Concrete written by Surendra P. Shah and published by John Wiley & Sons. This book was released on 1995-09-28 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: FRACTURE MECHANICS OF CONCRETE AND ROCK This book offers engineers a unique opportunity to learn, frominternationally recognized leaders in their field, about the latesttheoretical advances in fracture mechanics in concrete, reinforcedconcrete structures, and rock. At the same time, it functions as asuperb, graduate-level introduction to fracture mechanics conceptsand analytical techniques. Reviews, in depth, the basic theory behind fracture mechanics * Covers the application of fracture mechanics to compressionfailure, creep, fatigue, torsion, and other advanced topics * Extremely well researched, applies experimental evidence ofdamage to a wide range of design cases * Supplies all relevant formulas for stress intensity * Covers state-of-the-art linear elastic fracture mechanics (LEFM)techniques for analyzing deformations and cracking * Describes nonlinear fracture mechanics (NLFM) and the latestRILEM modeling techniques for testing nonlinear quasi-brittlematerials * And much more Over the past few years, researchers employing techniques borrowedfrom fracture mechanics have made many groundbreaking discoveriesconcerning the causes and effects of cracking, damage, andfractures of plain and reinforced concrete structures and rock.This, in turn, has resulted in the further development andrefinement of fracture mechanics concepts and tools. Yet, despitethe field's growth and the growing conviction that fracturemechanics is indispensable to an understanding of material andstructural failure, there continues to be a surprising shortage oftextbooks and professional references on the subject. Written by two of the foremost names in the field, FractureMechanics of Concrete fills that gap. The most comprehensive bookever written on the subject, it consolidates the latest theoreticalresearch from around the world in a single reference that can beused by students and professionals alike. Fracture Mechanics of Concrete is divided into two sections. In thefirst, the authors lay the necessary groundwork with an in-depthreview of fundamental principles. In the second section, theauthors vividly demonstrate how fracture mechanics has beensuccessfully applied to failures occurring in a wide array ofdesign cases. Key topics covered in these sections include: * State-of-the-art linear elastic fracture mechanics (LEFM)techniques for analyzing deformations and cracking * Nonlinear fracture mechanics (NLFM) and the latest RILEM modelingtechniques for testing nonlinear quasi-brittle materials * The use of R-Curves to describe cracking and fracture inquasi-brittle materials * The application of fracture mechanics to compression failure,creep, fatigue, torsion, and other advanced topics The most timely, comprehensive, and authoritative book on thesubject currently available, Fracture Mechanics of Concrete is botha complete instructional tool for academics and students instructural and geotechnical engineering courses, and anindispensable working resource for practicing engineers.
Download or read book Modelling Rock Fracturing Processes written by Baotang Shen and published by Springer Nature. This book was released on 2020-05-06 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the second edition of the well-known textbook Modelling Rock Fracturing Processes. The new and extended edition provides the theoretical background of rock fracture mechanics used for modelling of 2-D and 3-D geomechanics problems and processes. Fundamentals of rock fracture mechanics integrated with experimental studies of rock fracturing processes are highlighted. The computer programs FRACOD 2D and 3D are used to analyse fracture initiation and propagation for the three fracture modes: Mode I, II and III. Coupled fracture modelling with other continuous and distinct element codes including FLAC, PFC, RFPA, TOUGH are also described. A series of applications of fracture modelling with importance for modern society is presented and discussed by distinguished rock fracture modelling experts.
Download or read book Brittle Failure of Rock Materials written by G.E. Andreev and published by CRC Press. This book was released on 1995-01-01 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text comprises different basic aspects of brittle failure for rocks. It considers classical and contemporary models, as well as failure patterns under different loading schemes.
Download or read book Fracture Mechanics and Crack Growth written by Naman Recho and published by John Wiley & Sons. This book was released on 2012-12-27 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances related to the following two topics: how mechanical fields close to material or geometrical singularities such as cracks can be determined; how failure criteria can be established according to the singularity degrees related to these discontinuities. Concerning the determination of mechanical fields close to a crack tip, the first part of the book presents most of the traditional methods in order to classify them into two major categories. The first is based on the stress field, such as the Airy function, and the second resolves the problem from functions related to displacement fields. Following this, a new method based on the Hamiltonian system is presented in great detail. Local and energetic approaches to fracture are used in order to determine the fracture parameters such as stress intensity factor and energy release rate. The second part of the book describes methodologies to establish the critical fracture loads and the crack growth criteria. Singular fields for homogeneous and non-homogeneous problems near crack tips, v-notches, interfaces, etc. associated with the crack initiation and propagation laws in elastic and elastic-plastic media, allow us to determine the basis of failure criteria. Each phenomenon studied is dealt with according to its conceptual and theoretical modeling, to its use in the criteria of fracture resistance; and finally to its implementation in terms of feasibility and numerical application. Contents 1. Introduction. Part 1: Stress Field Analysis Close to the Crack Tip 2. Review of Continuum Mechanics and the Behavior Laws. 3. Overview of Fracture Mechanics. 4. Fracture Mechanics. 5. Introduction to the Finite Element Analysis of Cracked Structures. Part 2: Crack Growth Criteria 6. Crack Propagation. 7. Crack Growth Prediction in Elements of Steel Structures Submitted to Fatigue. 8. Potential Use of Crack Propagation Laws in Fatigue Life Design.
Download or read book Fracture of Brittle Disordered Materials Concrete Rock and Ceramics written by G. Baker and published by CRC Press. This book was released on 2004-01-14 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book derives from the invited IUTAM Symposium in September 1993. The contributions discuss recent advances in fracture mechanics studies of concrete, rock, ceramics and other brittle disordered materials at micro and structural levels. It draws together research and new applications in continuum, damage and fracture mechanics approaches.
Download or read book Fracture Kinetics of Crack Growth written by A.S. Krausz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past few years, we have made numerous presentations, delivered several series of lectures, and participated in many discussions on the processes of time-dependent crack growth. We felt that the understanding of these processes had reached a degree of maturity: the basic physical principles were established and their application to engineering practice was now feasible. We concluded that the best way to organize this knowledge was to write it up in a single, coherent system. Martinus Nijhoff kindly encouraged us and generously offered their collaboration. Hence, this book. The physical process of time-dependent subcritical crack growth is rigorously defined by statistical mechanics. If well presented, the principles can be readily understood by practitioners of fracture research and design engineers. We present the physical processes of crack growth in terms of atomic interactions that assume only a working knowledge of the standard engineering materials course contents. From this, we develop a framework that is valid for any type of material, be it metallic, polymeric, ceramic, glass or mineral - indeed, any solid. We also assume an elementary exposure to fracture mechanics. An appendix is provided that outlines those aspects of fracture mechanics that are needed for an introduction to fracture kinetics analyses; it also provides a common ground for concepts and terminology (see Appendix A). We proceed through theory to applications that are of interest in research, development and design, as well as in test and operating engineering practice.
Download or read book Geologic Fracture Mechanics written by Richard A. Schultz and published by Cambridge University Press. This book was released on 2019-08-08 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to geologic fracture mechanics covering geologic structural discontinuities from theoretical and field-based perspectives.
Download or read book Modelling Rock Fracturing Processes written by Baotang Shen and published by Springer Science & Business Media. This book was released on 2013-10-07 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text book provides the theoretical background of rock fracture mechanics and displacement discontinuity methods used for the modelling of geomechanical problems. The computer program FRACOD is used to analyse the fracture problems, assessing fracture initiation and propagation in tension (Mode I), shear (Mode II) and mixed mode I and II of solid intact or jointed geomaterials. The book also presents the fundamentals of thermo-mechanical coupling and hydro-mechanical coupling. Formulations of multiple regional mechanical, thermal and hydraulic functions, which allow analyses of fracture mechanics problems for structures made of brittle, rock-like materials, are provided. In addition, instructive examples of code verification and applications are presented. Additional material: The 2-D version of the FRACOD program, a manual on the program and a wealth of verification examples of classical problems in physics, mechanics and hydromechanics are available at http://extras.springer.com. A large number of applications related to civil, mining, petroleum and environmental engineering are also included. - The first textbook available on modelling of rock fracture propagation - Introduces readers to the fundamentals of rock fracturing - Uses a modern style of teaching with theory, mathematical modelling and applications in one package - The basic version of the FRACOD software, manual, verification examples and applications are available as additional material - The FRACOD program and manual enable the readers to solve fracture propagation problems on their own --------------------------- Ki-Bok Min, Department of Energy Resources Engineering, College of Engineering, Seoul National University, Korea “Challenging rock engineering applications require extreme conditions of stress, temperature and hydraulic pressure resulting in rock fracturing to a various extent. The FRACOD is one of few computer codes available in engineering rock mechanics that can simulate the initiation and propagation of fractures often interacting with natural fractures. Its capability has been significantly enhanced to include the hydraulic and thermal fracturing with concerted interaction from multi-national research and industry partners. My experience with the FRACOD is very positive and I am certain that its already-excellent track record will expand further in the future."
Download or read book Experimental Rock Deformation The Brittle Field written by M.S. Paterson and published by Springer Science & Business Media. This book was released on 2005-04-20 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary aim of this monograph is to present the current knowledge of brittle properties of rocks as determined in laboratory experiments. The principal aspects of brittle behavior are described with special attention to the fundamental physical aspects. Thus, the book provides a useful introduction to the basics of rock properties for engineering and earth science applications. Furthermore, it serves as a guide for graduate students and non specialists by presenting the relevant background material and where it can be found. For the new edition a further chapter has been added, and almost half of the chapters have been extensively revised and the others updated.
Download or read book The Life of Cracks written by Srečko Glodež and published by Cambridge Scholars Publishing. This book was released on 2020-07-13 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many people find the concept of fracture and damage mechanics to be somewhat problematic, mainly because, until recently, close attention in mechanics was focused especially on the strength and resistance of materials. In this sense, to speak of fracture is as uncomfortable for some as it is to speak of a deadly disease. In confronting and preventing a fatal disease, one must understand its complexity, symptoms, and behavior; by the same token, in securing the strength of an engineering structure, one must understand the reasons and type of its potential failure. This book will provide knowledge and insights on this matter to its readers.
Download or read book Static Creep Micro Macro Fracture Mechanics of Brittle Solids written by Xiaozhao Li and published by Springer Nature. This book was released on 2024-01-13 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers a large amount of recent research results on this topic to better understand the static creep micro–macro fracture mechanics in brittle solids (e.g., glass, ceramic, concrete, ice, and rock). To be precise, this is about to explore the effects of the external factors of stress paths, water content, seepage pressure, dynamic disturbance, thermal treated temperature, and the internal factors of crack angle, size, recovery, and nucleation coalescence on the static creep fracture mechanical properties in brittle solids. This book provides important theoretical support in evaluation for long-term lifetime in the brittle solid engineering (e.g., deep underground engineering, architecture engineering, aerospace engineering, and mechanical manufacturing engineering).
Download or read book Fracture Mechanics Applied to Brittle Materials written by S. W. Freiman and published by ASTM International. This book was released on 1979 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rock Fracture Mechanics written by Hans-Peter Rossmanith and published by Springer Science & Business Media. This book was released on 1983-10-21 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transit Development in Rock Mechanics written by Meifeng Cai and published by CRC Press. This book was released on 2014-10-20 with total page 823 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transit Development in Rock Mechanics Recognition, Thinking and Innovation contains 150 papers presented at the 3rd ISRM International Young Scholars Symposium on Rock Mechanics (8-10 November 2014, Xi an, China). The volume focusses on the transitional development in rock mechanics research from surface to underground mining and from shallow to a
