Download or read book Fourth RILEM International Conference on Concrete and Digital Fabrication written by Dirk Lowke and published by Springer Nature. This book was released on with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fourth RILEM International Conference on Concrete and Digital Fabrication written by Dirk Lowke and published by Springer. This book was released on 2024-10-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 4th RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held in Munich, Germany, on September 4-6, 2024. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior, alternative materials, microstructure, cold joints & interfaces, mechanical performance, reinforcement, structural engineering, durability and sustainability, automation and industrialization.
Download or read book Second RILEM International Conference on Concrete and Digital Fabrication written by Freek P. Bos and published by Springer Nature. This book was released on 2020-07-08 with total page 1209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held online and hosted by the Eindhoven University of Technology, the Netherlands from 6-9 July 2020. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior, alternative materials, microstructure, cold joints & interfaces, mechanical performance, reinforcement, structural engineering, durability and sustainability, automation and industrialization.
Download or read book First RILEM International Conference on Concrete and Digital Fabrication Digital Concrete 2018 written by Timothy Wangler and published by Springer. This book was released on 2018-08-29 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital fabrication has been termed the “third industrial revolution”, and is promising to revolutionize many disciplines, including most recently the construction sector. Both academia and industry see immense promise in cementitious materials, which lend themselves well to additive manufacturing techniques for digital fabrication in construction. With this recent trend and high interest in this new research field, the 1st RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2018) was organized. Since 2014, ETH Zurich has been host for the Swiss National Centre for Competence in Research (NCCR) for Digital Fabrication in Architecture, which is highly interdisciplinary and unique worldwide. In 2018, this NCCR opened the “DFAB House”, which incorporates many digital fabrication principles for architecture. It is also responsible for the 600 m2 Robotic Fabrication Lab and the first robotically built roof in the world. Held in tandem with Rob|Arch 2018, the leading conference for robotics in architecture, RILEM deemed it the right time to combine forces at this new conference, which will be the first large conference to feature the work of the recently created RILEM Technical Committee on Digital Fabrication with Cement-based Materials, among other leaders in this new field worldwide. This conference proceedings brings together papers that take into account the findings in this new area. Papers reflect the varying themes of the conference, including Materials, Processing, Structure, and Applications.
Download or read book Third RILEM International Conference on Concrete and Digital Fabrication written by Richard Buswell and published by Springer Nature. This book was released on 2022-06-24 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 3rd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held in Loughborough, UK, on June 27-29, 2022. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior, alternative materials, microstructure, cold joints & interfaces, mechanical performance, reinforcement, structural engineering, durability and sustainability, automation and industrialization.
Download or read book Fourth Industrial Revolution and Business Dynamics written by Nasser Rashad Al Mawali and published by Springer Nature. This book was released on 2021-10-07 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book explains strategic issues, trends, challenges, and future scenario of global economy in the light of Fourth Industrial Revolution. It consists of insightful scientific essays authored by scholars and practitioners from business, technology, and economics area. The book contributes to business education by means of research, critical and theoretical reviews of issues in Fourth Industrial Revolution.
Download or read book Smart Sustainable Infrastructure Building a Greener Tomorrow written by Nemkumar Banthia and published by Springer Nature. This book was released on with total page 1210 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Fabrication with Cement Based Materials written by Nicolas Roussel and published by Springer Nature. This book was released on 2022-01-12 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the work of the RILEM Technical Committee 276-DFC: Digital fabrication with cement-based materials. The most important outcomes of the technical committee are presented. First, a unified process classification for digital fabrication with concrete is proposed, discussed and illustrated. Then, a state of the art of the testing methods (both at a material and structural level and in the fresh and hardened state) is provided. The gathered knowledge is expected to form the foundation of some quality control procedures for fresh properties along with hardened properties and service life performance. The book will benefit academics, practitioners, industry and standardization committees interested in digital fabrication with cement-based materials.
Download or read book Rheology and Processing of Construction Materials written by Viktor Mechtcherine and published by Springer Nature. This book was released on 2019-08-24 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the peer-reviewed contributions presented at two parallel, closely interconnected events on advanced construction materials and processes, namely the 2nd International RILEM Conference on Rheology and Processing of Construction Materials (RheoCon2) and the 9th International RILEM Symposium on Self-Compacting Concrete (SCC9), held in Dresden, Germany on 8-11 September 2019. The papers discuss various aspects of research on the development, testing, and applications of cement-based and other building materials together with their specific rheological properties. Furthermore, the papers cover the latest findings in the fast-growing field of self-compacting concrete, addressing topics including components’ properties and characterization; chemical admixtures, effect of binders (incl. geopolymers, calcined clay, etc.) and mixture design; laboratory and in-situ rheological testing; constitutive models and flow modelling; numerical simulations; mixing, processing and casting processes; and additive manufacturing / 3D-printing. Also presenting case studies, the book is of interest to researchers, graduate students, and industry specialists, such as material suppliers, consultants and construction experts.
Download or read book Advances in Information Technology in Civil and Building Engineering written by Sebastian Skatulla and published by Springer Nature. This book was released on 2023-10-31 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances, innovations, and applications in the field of information technology in civil and building engineering, presented at the 19th International Conference on Computing in Civil and Building Engineering (ICCCBE), held in Cape Town, South Africa on October 26-28, 2022. It covers highly diverse topics such as BIM, construction information modeling, knowledge management, GIS, GPS, laser scanning, sensors, monitoring, VR/AR, computer-aided construction, product and process modeling, big data and IoT, cooperative design, mobile computing, simulation, structural health monitoring, computer-aided structural control and analysis, ICT in geotechnical engineering, computational mechanics, asset management, maintenance, urban planning, facility management, and smart cities. Written by leading researchers and engineers, and selected by means of a rigorous international peer-review process, the contributions highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.
Download or read book 3D Printing of Concrete written by Arnaud Perrot and published by John Wiley & Sons. This book was released on 2019-04-10 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of digital manufacturing techniques, such as 3D printing applied to concrete material, opens up new perspectives on the way in which buildings are designed. Research on this theme is thriving and there is a high rate of innovation related to concrete. At the same time, the first life-size constructions made from printed concrete are emerging from the ground. This book presents state-of-the-art knowledge on the different printing processes as well as on the concrete material that must adapt to these new manufacturing techniques, such as new hardware and new printers for concrete. The possibilities in terms of architectural design are discussed as well as the pathways that remain to be uncovered. The book also explores the challenges that researchers and companies expect to overcome as they get closer to democratizing this potential revolution that is the digital manufacturing of concrete.
Download or read book Construction 3D Printing written by Ming Jen Tan and published by Springer Nature. This book was released on with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Additive Manufacturing for Construction written by Biranchi Panda and published by Emerald Group Publishing. This book was released on 2023-12-08 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing for Construction reveals additive manufacturing technologies for building and construction applications. The book explores on-site and off-site construction techniques, featuring design strategies which will eliminate production difficulties and minimise assembly costs, from both academic and industrial perspectives.
Download or read book Fabricate 2020 written by Jane Burry and published by UCL Press. This book was released on 2020-04-06 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fabricate 2020 is the fourth title in the FABRICATE series on the theme of digital fabrication and published in conjunction with a triennial conference (London, April 2020). The book features cutting-edge built projects and work-in-progress from both academia and practice. It brings together pioneers in design and making from across the fields of architecture, construction, engineering, manufacturing, materials technology and computation. Fabricate 2020 includes 32 illustrated articles punctuated by four conversations between world-leading experts from design to engineering, discussing themes such as drawing-to-production, behavioural composites, robotic assembly, and digital craft.
Download or read book First RILEM International Conference on Concrete and Digital Fabrication Digital Concrete 2018 written by Timothy Wangler and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Concrete Technology written by Zongjin Li and published by John Wiley & Sons. This book was released on 2022-08-17 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Concrete Technology A thorough grounding in the science of concrete combined with the latest developments in the rapidly evolving field of concrete technology In the newly revised second edition of Advanced Concrete Technology, a distinguished team of academics and engineers delivers a state-of-the-art exploration of modern and advanced concrete technologies developed during the last decade. The book combines the essential concepts and theory of concrete with practical examples of material design, composition, processing, characterization, properties, and performance. The authors explain, in detail, the hardware and software of concrete, and offer readers discussions of the most recent advances in concrete technology, including, but not limited to, concrete recycling, nanotechnology, microstructural simulation, additive manufacturing, and non-destructive testing methods. This newest edition of Advanced Concrete Technology provides a sustained emphasis on sustainable and novel technologies, like new binders, 3D printing, and other advanced materials and techniques. Readers will also find: A thorough introduction to concrete, including its definition and its historical evolution as a material used in engineering and construction In-depth explorations of the materials for making concrete and the properties of fresh concrete Comprehensive discussions of the material structure of concrete, hardened concrete, and advanced cementitious composites Fulsome treatments of concrete fracture mechanics, non-destructive testing in concrete engineering, and future trends in concrete Perfect for undergraduate and graduate students studying civil or materials engineering—especially those taking classes in the properties of concrete or concrete technologies—as well as engineers in the concrete industry. Advanced Concrete Technology, 2nd Edition will also earn a place in the libraries of civil and materials engineers working in the industry.
Download or read book Fabricate 2024 written by Bob Sheil and published by UCL Press. This book was released on 2024-04-04 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fabricate 2024: Creating Resourceful Futures is the fifth volume in the series of Fabricate publications. The first conference – ‘Making Digital Architecture’ – explored the ways in which technology, design and industry are shaping the world around us. Since then, we have become finely attuned to the negative impacts of this shaping. The 2024 conference, hosted in Copenhagen, sets focus on the pressing need to develop new models for architectural production that rethink how resource is deployed, its intensity, its socio-ecological origins and sensitivity to environment. This book features the work of designers, engineers and makers operating within the built environment. It documents disruptive approaches that reconsider how fabrication can be leveraged to address our collective and entangled challenges of resource scarcity, climate emergency and burgeoning demand. Exploring case studies of completed buildings and works-in-progress, together with interviews with leading thinkers, this edition of Fabricate offers a plurality of tangible models for design and production that set a creative and responsible course towards resourceful futures.
