Download or read book Four Terminal Junction Field effect Transistor Model for Computer aided Design written by Hao Ding and published by . This book was released on 2007 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compact model for four-terminal (independent top and bottom gates) junction field-effect transistor (JFET) is presented in this dissertation. The model describes the steady-state characteristics with a unified equation for all bias conditions that provides a high degree of accuracy and continuity of conductance, which are important for predictive analog circuit simulations. It also includes capacitance and leakage equations. A special capacitance drop-off phenomenon at the pinch-off region is studies and modeled. The operations of the junction field-effect transistor (JFET) with an oxide top-gate and full oxide isolation are analyzed, and a semi-physical compact model is developed. The effects of the different modes associated with the oxide top-gate on the JFET steady-state characteristics of the transistor are discussed, and a single expression applicable for the description of the JFET dc characteristics for all operation modes is derived. The model has been implemented in Verilog-A and simulated in Cadence framework for comparison to experimental data measured at Texas Instruments.
Download or read book Modeling Nanowire and Double Gate Junctionless Field Effect Transistors written by Farzan Jazaeri and published by Cambridge University Press. This book was released on 2018-03-01 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book on the topic, this is a comprehensive introduction to the modeling and design of junctionless field effect transistors (FETs). Beginning with a discussion of the advantages and limitations of the technology, the authors also provide a thorough overview of published analytical models for double-gate and nanowire configurations, before offering a general introduction to the EPFL charge-based model of junctionless FETs. Important features are introduced gradually, including nanowire versus double-gate equivalence, technological design space, junctionless FET performances, short channel effects, transcapacitances, asymmetric operation, thermal noise, interface traps, and the junction FET. Additional features compatible with biosensor applications are also discussed. This is a valuable resource for students and researchers looking to understand more about this new and fast developing field.
Download or read book Compact Models for Integrated Circuit Design written by Samar K. Saha and published by CRC Press. This book was released on 2018-09-03 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compact Models for Integrated Circuit Design: Conventional Transistors and Beyond provides a modern treatise on compact models for circuit computer-aided design (CAD). Written by an author with more than 25 years of industry experience in semiconductor processes, devices, and circuit CAD, and more than 10 years of academic experience in teaching compact modeling courses, this first-of-its-kind book on compact SPICE models for very-large-scale-integrated (VLSI) chip design offers a balanced presentation of compact modeling crucial for addressing current modeling challenges and understanding new models for emerging devices. Starting from basic semiconductor physics and covering state-of-the-art device regimes from conventional micron to nanometer, this text: Presents industry standard models for bipolar-junction transistors (BJTs), metal-oxide-semiconductor (MOS) field-effect-transistors (FETs), FinFETs, and tunnel field-effect transistors (TFETs), along with statistical MOS models Discusses the major issue of process variability, which severely impacts device and circuit performance in advanced technologies and requires statistical compact models Promotes further research of the evolution and development of compact models for VLSI circuit design and analysis Supplies fundamental and practical knowledge necessary for efficient integrated circuit (IC) design using nanoscale devices Includes exercise problems at the end of each chapter and extensive references at the end of the book Compact Models for Integrated Circuit Design: Conventional Transistors and Beyond is intended for senior undergraduate and graduate courses in electrical and electronics engineering as well as for researchers and practitioners working in the area of electron devices. However, even those unfamiliar with semiconductor physics gain a solid grasp of compact modeling concepts from this book.
Download or read book Electronic Circuits written by Ulrich Tietze and published by Springer. This book was released on 2015-12-09 with total page 1544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic Circuits covers all important aspects and applications of modern analog and digital circuit design. The basics, such as analog and digital circuits, on operational amplifiers, combinatorial and sequential logic and memories, are treated in Part I, while Part II deals with applications. Each chapter offers solutions that enable the reader to understand ready-made circuits or to proceed quickly from an idea to a working circuit, and always illustrated by an example. Analog applications cover such topics as analog computing circuits. The digital sections deal with AD and DA conversion, digital computing circuits, microprocessors and digital filters. This editions contains the basic electronics for mobile communications. The accompanying CD-ROM contains PSPICE software, an analog-circuit-simulation package, plus simulation examples and model libraries related to the book topics.
Download or read book Unified Field Effect Transistor Modeling and Characterization for Computer aided Design written by Byung-Jong Moon and published by . This book was released on 1991 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2007 with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Basic Integrated Circuit Engineering written by Douglas J. Hamilton and published by McGraw-Hill Companies. This book was released on 1975 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: -- Solutions manual to accompany Basic integrated circuit engineering. [By] Douglas J. Hamilton [and] William G. Howard. N.Y., McGraw-Hill, 1976. 280p.
Download or read book University of Michigan Official Publication written by University of Michigan and published by UM Libraries. This book was released on 1993 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: Each number is the catalogue of a specific school or college of the University.
Download or read book VSC FACTS HVDC written by Enrique Acha and published by John Wiley & Sons. This book was released on 2019-04-01 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative reference on the new generation of VSC-FACTS and VSC-HVDC systems and their applicability within current and future power systems VSC-FACTS-HVDC and PMU: Analysis, Modelling and Simulation in Power Grids provides comprehensive coverage of VSC-FACTS and VSC-HVDC systems within the context of high-voltage Smart Grids modelling and simulation. Readers are presented with an examination of the advanced computer modelling of the VSC-FACTS and VSC-HVDC systems for steady-state, optimal solutions, state estimation and transient stability analyses, including numerous case studies for the reader to gain hands-on experience in the use of models and concepts. Key features: Wide-ranging treatment of the VSC achieved by assessing basic operating principles, topology structures, control algorithms and utility-level applications. Detailed advanced models of VSC-FACTS and VSC-HVDC equipment, suitable for a wide range of power network-wide studies, such as power flows, optimal power flows, state estimation and dynamic simulations. Contains numerous case studies and practical examples, including cases of multi-terminal VSC-HVDC systems. Includes a companion website featuring MATLAB software and Power System Computer Aided Design (PSCAD) scripts which are provided to enable the reader to gain hands-on experience. Detailed coverage of electromagnetic transient studies of VSC-FACTS and VSC-HVDC systems using the de-facto industry standard PSCAD/EMTDC simulation package. An essential guide for utility engineers, academics, and research students as well as industry managers, engineers in equipment design and manufacturing, and consultants.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Operation and Modeling of the MOS Transistor written by Yannis Tsividis and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1987 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide to RRB Junior Engineer Stage II Electrical Allied Engineering 4th Edition written by and published by Disha Publications. This book was released on with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guide to RRB Junior Engineer Stage II Electrical & Allied Engineering 3rd Edition covers all the 5 sections including the Technical Ability Section in detail. • The book covers the complete syllabus as prescribed in the latest notification. • The book is divided into 5 sections which are further divided into chapters which contains theory explaining the concepts involved followed by Practice Exercises. • The Technical section is divided into 11 chapters. • The book provides the Past 2014 & 2015 & 2019 Solved questions at the end of each section. • The book is also very useful for the Section Engineering Exam.
Download or read book Compound Semiconductor Electronics written by Michael Shur and published by World Scientific. This book was released on 1996 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: In many respects, compound semiconductor technology has reached the age of maturity when applications will have been defined, yields are high enough and well established, and gallium arsenide and related compounds have carved many important niches in electronics. This book reviews the state-of-the-art of compound semiconductor electronics. It covers the microwave, millimeter wave, and submillimeter wave devices, monolithic microwave and digital integrated circuits made from compound semiconductors and emerging wide band semiconductor materials. The book is written by leading experts in compound semiconductor electronics from industry and academia and strikes the balance between practical applications, record-breaking results, and design and modeling tools specific for compound semiconductor technology. Engineers, scientists, and graduate students working in solid state electronics and especially in the area of compound semiconductor electronics will find this book very useful. It could also be used as a text or a supplementary text for graduate courses in this field.
Download or read book Modeling of the Single and Dual gate Microwave Field Effect Transistors for Computer Aided Design written by Mohammad Abdeen and published by . This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book MOS Field effect Transistors and Integrated Circuits written by Paul Richman and published by Wiley-Interscience. This book was released on 1973 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book RF and Microwave Transistor Oscillator Design written by Andrei Grebennikov and published by John Wiley & Sons. This book was released on 2007-04-30 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increase of consumer electronics and communications applications using Radio Frequency (RF) and microwave circuits has implications for oscillator design. Applications working at higher frequencies and using novel technologies have led to a demand for more robust circuits with higher performance and functionality, but decreased costs, size and power consumption. As a result, there is also a need for more efficient oscillators. This book presents up to date information on all aspects of oscillator design, enabling a selection of the best oscillator topologies with optimized noise reduction and electrical performance. RF and Microwave Transistor Oscillator Design covers: analyses of non-linear circuit design methods including spectral-domain analysis, time-domain analysis and the quasilinear method; information on noise in oscillators including chapters on varactor and oscillator frequency tuning, CMOS voltage-controlled oscillators and wideband voltage-controlled oscillators; information on the stability of oscillations, with discussions on the stability of multi-resonant circuits and the phase plane method; optimized design and circuit techniques, beginning with the empirical and analytic design approaches, moving on to the high-efficiency design technique; general operation and design principles of oscillators, including a section on the historical aspects of oscillator configurations. A valuable reference for practising RF and Microwave designers and engineers, RF and Microwave Transistor Oscillator Design is also useful for lecturers, advanced students and research and design (R&D) personnel.
Download or read book An Integrated Circuit Junction Field effect Transistor Design Model written by James Leonard Dunkley and published by . This book was released on 1969 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
