Download or read book 1 Forsthoffer s Rotating Equipment Handbooks written by William E. Forsthoffer and published by Elsevier. This book was released on 2005-12-16 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'Fundamentals of Rotating Equipment' is an overview of the main types of rotating machinery in industry, and covers such aspects as system dynamics, surge control, vibration and balancing, radial bearing design, performance parameters, rotor system design and operation, rotor axial (thrust) forces, performance objectives and mechanical restraints, auxiliary systems and seals. This book will enhance rotating equipment reliability and safety throughout the many industries where such equipment is vital to a successful business. Over recent years there have been substantial changes in those industries which are concerned with the design, purchase and use of special purpose (ie critical, high-revenue) rotating equipment. Key personnel have been the victims of early retirement or have moved to other industries: contractors and end-users have reduced their technical staff and consequently have to learn complex material ‘from scratch’. As a result, many companies are finding that they are devoting unnecessary man hours to the discovery and explanation of basic principles, and having to explain these to clients who should already be aware of them. In addition, the lack of understanding by contractors and users of equipment characteristics and operating systems often results in a ‘wrong fit’ and a costly reliability problem. The stakes can be high, and it against this background that this book has been published. It is the outcome of many years experience and is based on well-honed teaching material which is easily readable, understandable and actually enjoyable! This is a five volume set. The volumes are: 1. Fundamentals of Rotating Equipment 2. Pumps 3. Compressors 4. Auxiliary Systems 5. Reliability Optimization thru Component Condition Monitoring and Root Cause Analysis * A distillation of many years of on-site training by a well-known US Engineer who also operates in the Middle East. * A Practical book written in a succinct style and well illustrated throughout. * An overview of the main types of rotating machinery in industry.

Download or read book Forsthoffer s Best Practice Handbook for Rotating Machinery written by William E. Forsthoffer and published by Elsevier. This book was released on 2011-05-21 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimize plant asset safety and reliability while minimizing operating costs with this invaluable guide to the engineering, operation and maintenance of rotating equipment Based upon his multi-volume Rotating Equipment Handbooks, Forsthoffer's Best Practice Handbook for Rotating Machinery summarises, expands and updates the content from these previous books in a convenient all-in-one volume. Offering comprehensive technical coverage and insider information on best practices derived from lessons learned in the engineering, operation and maintenance of a wide array of rotating equipment, this new title presents: - A unique "Best Practice" and "Lessons Learned" chapter framework, providing bite-sized, troubleshooting instruction on complex operation and maintenance issues across a wide array of industrial rotating machinery. - Five chapters of completely new material combined with updated material from earlier volumes, making this the most comprehensive and up-to-date handbook for rotary equipment currently available. Intended for maintenance, engineering, operation and management, Forsthoffer's Best Practice Handbook for Rotating Machinery is a one-stop resource, packed with a lifetime's rotating machinery experience, to help you improve efficiency, safety, reliability and cost. - A unique "Lessons Learned/Best Practices" component opens and acts as a framework for each chapter. Readers not only become familiar with a wide array of industrial rotating machinery; they learn how to operate and maintain it by adopting the troubleshooting perspective that the book provides - Five chapters of completely new material combined with totally updated material from earlier volumes of Forsthoffer's Handbook make this the most comprehensive and up-to-date handbook for rotary equipment currently - Users of Forsthoffer's multi-volume Rotating Equipment Handbooks now have an updated set, with expanded coverage, all in one convenient, reasonably-priced volume

Download or read book More Best Practices for Rotating Equipment written by Michael S. Forsthoffer and published by Butterworth-Heinemann. This book was released on 2017-02-06 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: More Best Practices for Rotating Equipment follows Forsthoffer's multi-volume Rotating Equipment Handbooks, addressing the latest best practices in industrial rotating machinery and also including a comprehensive treatment of the basics for reference. The author's famous troubleshooting approach teaches the reader proven methodologies for installation, operation, and maintenance of equipment, and covers all phases of work with rotating equipment. Reliability optimization is also addressed for the first time. The book is ideal for engineers working in the design, installation, operation, and maintenance of power machinery. It is also an essential source of information for postgraduate students and researchers of mechanical and industrial engineering. - Presents 200 new best practices for rotating equipment - Offers an easy-to-use reference, with each chapter addressing a different type of equipment - Covers all phases of work with rotating equipment, from pre-commissioning through maintenance

Download or read book Forsthoffer s Proven Guidelines for Rotating Machinery Excellence written by William E. Forsthoffer and published by Butterworth-Heinemann. This book was released on 2021-12-03 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Forsthoffer's Proven Guidelines for Rotating Machinery Excellence draws on Forsthoffer's 60 years of industry experience to get new operatives up to speed fast. Each of the topics covered are selected based on hard-won knowledge of where problems with rotating machinery originate. This easy to use, highly-illustrated book is designed to elevate the competence of entry level personnel to enable them to immediately contribute to providing optimum rotating machinery reliability for their companies. The first 3 chapters address practical personal rotating machinery awareness, detail how to optimize this awareness to identify "low hanging fruit" safety and reliability improvement opportunities and how to define and implement a cost-effective action plan. The remaining chapters focus on the function of key components in each type of rotating machinery and how to monitor and correct their condition before failure. The last chapter is an RCA (Root Cause Analysis) procedure chapter detailing effective Root Cause Identification before a Failure to prevent a costly failure and the need for a RCFA. - Real-life examples are provided from the field of operation and maintenance of rotating machinery, helping readers to implement effectively - Includes important advice on monitoring approaches for different types of machines, highlighting differences between working with pumps and compressors - A chapter on Root Cause Identification features proven methods to help your organization to prevent machinery failures

Download or read book 5 Forsthoffer s Rotating Equipment Handbooks written by William E. Forsthoffer and published by Elsevier. This book was released on 2005-12-16 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over recent years there have been substantial changes in those industries which are concerned with the design, purchase and use of special purpose (ie critical, high-revenue) rotating equipment. Key personnel have been the victims of early retirement or have moved to other industries: contractors and end-users have reduced their technical staff and consequently have to learn complex material 'from scratch'. As a result, many companies are finding that they are devoting unnecessary man hours to the discovery and explanation of basic principles, and having to explain these to clients who should already be aware of them. In addition, the lack of understanding by contractors and users of equipment characteristics and operating systems often results in a 'wrong fit' and a costly reliability problem. Forsthoffer's Rotating Equipment Handbooks: Reliability Optimization through Component Condition Monitoring and Root Cause Analysis details the effective method of component condition monitoring for use as both a predictive maintenance and root cause analysis tool. It also details the major failure causes, the author's proven root cause analysis procedure with exercises and case histories, installation, pre-commissioning planning, functional testing and commissioning, preventive maintenance strategies and more. Forsthoffer's Rotating Equipment Handbooks: Reliability Optimization through Component Condition Monitoring and Root Cause Analysis is the last title in the five volume set. The volumes are: 1. Fundamentals of Rotaing Equipment; 2. Pumps; 3. Compressors; 4. Auxiliary Systems; 5. Reliability Optimization through Component Condition Monitoring and Root Cause Analysis'. Part of a five volume set which is the distillation of many years of on-site training by a well-known US Engineer who also operates in the Middle East A practical book written in a succinct style and well-illustrated throughout

Download or read book Machine Tool Vibrations and Cutting Dynamics written by Brandon C. Gegg and published by Springer Science & Business Media. This book was released on 2011-05-30 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Machine Tool Vibrations and Cutting Dynamics” covers the fundamentals of cutting dynamics from the perspective of discontinuous systems theory. It shows the reader how to use coupling, interaction, and different cutting states to mitigate machining instability and enable better machine tool design. Among the topics discussed are; underlying dynamics of cutting and interruptions in cutting motions; the operation of the machine-tool systems over a broad range of operating conditions with minimal vibration and the need for high precision, high yield micro- and nano-machining.

Download or read book Rotating Equipment written by James M. Watterson and published by Momentum Press. This book was released on 2019-03-05 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rotating Equipment: Maintenance and Troubleshooting has been written on the back of Dr. Watterson’s experience in working with over 20 oil refineries and petrochemical and fertilizer industries worldwide, which spans over 30 years. Every aspect of rotating equipment is explored, from turbines, both gas and steam, compressors, pumps to the use of predictive maintenance equipment. Included in this book is an in-depth explanation of predictive maintenance techniques, such as ultrasound testing, eddy curves, visual testing techniques, such as stroboscope, liquid penetrant, and vibration monitoring. Dr. Watterson also describes clearly the value of online condition-based monitoring of rotating equipment. The primary objective of this book is to show the way to reduce cost and frequency of planned maintenance by detection of abnormalities on equipment’s operating and preset performance parameters.

Download or read book Operator s Guide to Rotating Equipment written by Julien LeBleu and published by . This book was released on 2014-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every operator who is responsible for monitoring critical rotating equipment will greatly benefit from this handy reference book. The goal of this book is to present proven techniques that will enable rookie and veteran operators alike to detect problems early and, we hope, eliminate major outages and/or maintenance costs. To achieve this goal we shall explain the basics of lubrication systems, bearings, drivers, seals and sealing systems, for centrifugal and positive displacement pumps as well as turbines, centrifugal compressors and reciprocating compressors. We will then present common sense inspection methods for centrifugal and positive displacement pumps, gear boxes, motors, heat exchangers, and turbines.

Download or read book Forsthoffer s Best Practice Handbook for Rotating Machinery written by William E. Forsthoffer and published by Elsevier. This book was released on 2011-06-03 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Forsthoffer summarizes, expands, and updates the content from previous books in a convenient all-in-one volume. This titles offers comprehensive technical coverage and insider information on best practices derived from lessons learned in the engineering, operation, and maintenance of a wide array of rotating equipment.

Download or read book 3 Forsthoffer s Rotating Equipment Handbooks written by William E. Forsthoffer and published by Elsevier. This book was released on 2005-12-16 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over recent years there have been substantial changes in those industries which are concerned with the design, purchase and use of special purpose (ie critical, high-revenue) rotating equipment. Key personnel have been the victims of early retirement or have moved to other industries: contractors and end-users have reduced their technical staff and consequently have to learn complex material 'from scratch'. As a result, many companies are finding that they are devoting unnecessary man hours to the discovery and explanation of basic principles, and having to explain these to clients who should already be aware of them. In addition, the lack of understanding by contractors and users of equipment characteristics and operating systems often results in a 'wrong fit' and a costly reliability problem. Forsthoffer's Rotating Equipment Handbooks: Compressors provides detailed coverage of characteristics, types, operation in a process system, (using the concept of required and produced gas head) performance relationships, selection, what determines the turbo compressor curve shape, surge/stall/stonewall, the effects of fouling, the design basis of journal and thrust bearings, balance drums, seals, critical speeds, control and protection guidelines, series and parallel operation, component condition monitoring, troubleshooting and many other aspects. Forsthoffer's Rotating Equipment Handbook: Compressors is the third title in the five volume set. The volumes are: 1. Fundamentals of Rotaing Equipment; 2. Pumps; 3. Compressors; 4. Auxiliary Systems; 5. Reliability Optimization through Component Condition Monitoring and Root Cause Analysis'. * One of a five volume set which is the distillation of many years of on-site training by a well-known US Engineer who also operates in the Middle East. * A Practical book written in a succinct style and well illustrated throughout.

Download or read book Forsthoffer s Rotating Equipment Handbooks written by William E. Forsthoffer and published by Elsevier. This book was released on 2006-01-20 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over recent years there have been substantial changes in those industries which are concerned with the design, purchase and use of special purpose (ie critical, high-revenue) rotating equipment. Key personnel have been the victims of early retirement or have moved to other industries: contractors and end-users have reduced their technical staff and consequently have to learn complex material 'from scratch'. As a result, many companies are finding that they are devoting unnecessary man hours to the discovery and explanation of basic principles, and having to explain these to clients who should already be aware of them. In addition, the lack of understanding by contractors and users of equipment characteristics and operating systems often results in a 'wrong fit' and a costly reliability problem. The stakes can be high, and it against this background that Forsthoffer's Rotating Equipment Handbooks have been published. Each is the outcome of many years experience and is based on well-honed teaching material which is easily readable, understandable and actually enjoyable! The result is a set of books which will enhance rotating equipment reliability and safety throughout the many industries where such equipment is vital to a successful business. This is a five volume set. The volumes are: 1: Fundamentals of Rotating Equipment 2: Pumps 3: Compressors 4: Auxiliary Equipment 5: Component Condition Monitoring/ Root Cause Analysis * A five volume set which is the distillation of many years of on-site training by a well-known US Engineer who also operates in the Middle East. * These are PRACTICAL books written in a succinct style and well illustrated throughout. * They concentrate on MAINTENANCE and RELIABILITY of machinery so as to reduce down time and cost.

Download or read book 4 Forsthoffer s Rotating Equipment Handbooks written by William E. Forsthoffer and published by Elsevier. This book was released on 2006-02-09 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Will enhance rotating equipment reliability and safety throughout the many industries where such equipment is vital to a successful business. The volumes are: pumps; compressors; auxiliary systems; component condition monitoring/ root cause analysis; best practice/ lessons learned.

Download or read book An Introduction to Predictive Maintenance written by R. Keith Mobley and published by Elsevier. This book was released on 2002-10-24 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of An Introduction to Predictive Maintenance helps plant, process, maintenance and reliability managers and engineers to develop and implement a comprehensive maintenance management program, providing proven strategies for regularly monitoring critical process equipment and systems, predicting machine failures, and scheduling maintenance accordingly. Since the publication of the first edition in 1990, there have been many changes in both technology and methodology, including financial implications, the role of a maintenance organization, predictive maintenance techniques, various analyses, and maintenance of the program itself. This revision includes a complete update of the applicable chapters from the first edition as well as six additional chapters outlining the most recent information available. Having already been implemented and maintained successfully in hundreds of manufacturing and process plants worldwide, the practices detailed in this second edition of An Introduction to Predictive Maintenance will save plants and corporations, as well as U.S. industry as a whole, billions of dollars by minimizing unexpected equipment failures and its resultant high maintenance cost while increasing productivity. - A comprehensive introduction to a system of monitoring critical industrial equipment - Optimize the availability of process machinery and greatly reduce the cost of maintenance - Provides the means to improve product quality, productivity and profitability of manufacturing and production plants

Download or read book Medical Imaging in Clinical Trials written by Colin G. Miller and published by Springer Science & Business Media. This book was released on 2014-01-30 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last few years the use of medical imaging has increased exponentially in routine clinical practice. This has been reflected in a rapidly increasing use of medical imaging in clinical trials, through all phases. More recently this has culminated in a number of inter-disciplinary meetings with the various stake holders, including the FDA. Changes in the regulatory process has resulted, when it comes to the submission of data to the FDA, in a therapeutic agent where one or more of the trial end-points is the assessment of a radiological end-point. No longer is it sufficient to have the images read by the local investigator site. The FDA has also identified Medical Imaging as one of the key 6 points in the Critical Path initiative which was launched in 2004. This puts a keen focus on the role of imaging and the need to clearly identify and understand this aspect of clinical trials. As the pharmaceutical, biotech and medical device industry continues to identify ways to improve and speed up product development, medical imaging plays a more significant role. An understanding of the methodology and the metrics is therefore required but difficult to ascertain in one easy to read volume for individuals entering this field. This book will therefore fulfill this void, be it for the pharmaceutical personnel from medical director to monitor, or the Principal Investigator who is having to understand the complexities of the imaging and why it is having to be sent off-site for a 'central read.'

Download or read book Machinery Failure Analysis and Troubleshooting written by Heinz P. Bloch and published by Butterworth-Heinemann. This book was released on 1994 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Transporting Operations of Food Materials within Food Factories written by Seid Mahdi Jafari and published by Woodhead Publishing. This book was released on 2022-08-26 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transporting Operations of Food Materials within Food Factories, a volume in the Unit Operations and Processing Equipment in the Food Industry series, explains the processing operations and equipment necessary for storage and transportation of food materials within food production factories. Divided into four sections, Receiving and storage facilities, Liquid food transportation, Solid and semi- solid transportation and General material handling machines in food plants, all sections emphasize basic content relating to experimental, theoretical, computational and/or applications of food engineering principles and relevant processing equipment. Written by experts in the field of food engineering in a simple and dynamic way, the book targets all who are engaged in worldwide food processing operations, giving readers comprehensive knowledge and an understanding of different transporting facilities and equipments. - Thoroughly explores alternatives in food processing through innovative transporting operations - Brings novel applications of pumping and conveying operations in food industries - Covers how to improve the quality and safety of food products with good transporting operations

Download or read book Impact Analysis of Total Productive Maintenance written by José Roberto Díaz-Reza and published by Springer. This book was released on 2018-10-01 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book present the state of the art in Total Productive Maintainance (TPM) and its benefits. The authors present a survey applied to 368 manufacturing industries in order to determine their level of execution of TPM. Then a series of causal models are presented. For each model, the authors present a measure of the dependency between the critical success factors and the benefits obtained, allowing industry managers to differentiate between essential and non-essential activities. The content also allows students and academics to obtain a theoretical and empirical basis on the importance of TPM as a lean manufacturing tool in the context of industry 4.0.