Download or read book Formulation Evaluation of Floating Matrix Tablets of Levofloxacin written by Narendar Dudhipala and published by . This book was released on 2012-09-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Infectious Diseases Drug Delivery Systems written by Ranjita Shegokar and published by Springer Nature. This book was released on 2023-05-18 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: The disability-adjusted life year (DALY) is a generic measure of health effect that can be used in cost-effectiveness analysis as an alternative to the quality-adjusted life year (QALY). Infectious diseases are one of the major to cause significant losses of DALY and QALY. Human infectious diseases are disorders that are triggered by the micro-organisms such as bacteria, fungi, viruses, or parasites. The majority of such diseases are contagious and create a public health menace. There are several reasons why infectious diseases are deadly diseases, and one of the primary reasons is the drug resistance developed over time. Drug resistance-associated mutations are linked to increasing drug efflux, modifications of the drugs, or their targets. Every year, new drugs are being approved by FDA to treat infectious diseases. Nonetheless, the infectious diseases will undoubtedly persist as permanent and main threats to humanity for now and in the future. A total of four books are covered under the series of Infectious drug diseases. - Malarial drug delivery systems - Tubercular drug delivery systems - Viral drug delivery systems - Infectious disease drug delivery systems Infectious diseases are the world’s greatest killers that present one of the most significant health and security challenges. Humans have lived with emerging and re-emerging pathogens since before the documented history of civilization. The only determining fact today is - If the situation is “worse” or “better” than in past. The answer is probably “worse”, may be due significant increase in human population, increased cross-continent mobility, imbalanced (stressed) life style, irregular food habits leading to compromised innate immunity and over or under practiced hygiene routine. When the incidence of such a disease in people increases over 20 years or threatens to increase, it is called an “emerging” disease, and a growing number have made watch lists and headlines in nearly every country -like highly pathogenic H5N1 avian influenza, severe acute respiratory syndrome (SARS), Ebola virus, food- and waterborne illnesses, and a range of antimicrobial-resistant bacterial diseases TB. This book addresses current and new therapy developments in treating such infectious diseases, updates on finding new drugs, identification of innovative diagnostic methods, understanding of disease research models and clinical trials performances of new treatment modalities. Audiences from a broad range of groups, from researchers, academicians, and public health bodies to regulatory experts, can benefit from the compiled information to learn more about patient needs and current research advances in the field of infectious diseases and related research.

Download or read book Bioadhesives in Drug Delivery written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2020-05-12 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the phenomenon of bioadhesion i.e. its theories or mechanism(s) are of critical importance in developing optimum bioadhesive polymers (used in bioadhesives). Such bioadhesive polymers are the key for exhibiting the process of bioadhesion, controlled/sustained release of drugs, and drug targeting. The use of bioadhesives restricts the delivery system to the site of interest and thus offers a useful and efficient technique for targeting a drug to the desired location for a prolonged duration. This book addresses the various relevant aspects of bioadhesives in drug delivery in an easily accessible and unified manner. The book containing 12 chapters written by eminent researchers from many parts of the globe is divided into three parts: Part 1: Fundamental Aspects; Part 2: Bioadhesive Formulations; Part 3: Drug Delivery Applications. The topics covered include: Theories and mechanisms of bioadhesion; bioadhesive polymers for drug delivery applications; methods for characterization of bioadhesiveness of drug delivery systems; bioadhesive films and drug delivery applications; bioadhesive nanoparticles; and bioadhesive hydrogels and applications ocular biodhesive drug delivery systems; buccal bioadhesive drug delivery systems; gastrointestinal bioadhesive drug delivery systems ; nasal bioadhesive drug delivery systems; vaginal drug delivery systems; pulmonary bioadhesive drug delivery systems.

Download or read book Strategies to Modify the Drug Release from Pharmaceutical Systems written by Marcos Luciano Bruschi and published by Woodhead Publishing. This book was released on 2015-06-16 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the earliest dosage forms to modern drug delivery systems, came a great development and growth of knowledge with respect to drug delivery. Strategies to Modify the Drug Release from Pharmaceutical Systems will address principles, systems, applications and advances in the field.It will be principally a textbook and a reference source of strategies to modify the drug release. Moreover, the characterization, mathematical and physicochemical models, applications and the systems will be discussed. Addresses the principles, systems, applications and advances in the field of drug delivery Highlights the mathematical and physicochemical principles related to strategies Discusses drug release and its possible modifications

Download or read book Polymeric Drug Delivery Systems written by Glen S. Kwon and published by CRC Press. This book was released on 2005-04-12 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizing four major classes of polymers for drug delivery-water-soluble polymers, hydrogels, biodegradable polymers, and polymer assemblies-this reference surveys efforts to adapt, modify, and tailor polymers for challenging molecules such as poorly water-soluble compounds, peptides/proteins, and plasmid DNA.

Download or read book 3D Printing of Pharmaceuticals written by Abdul W. Basit and published by Springer. This book was released on 2018-08-06 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D printing is forecast to revolutionise the pharmaceutical sector, changing the face of medicine development, manufacture and use. Potential applications range from pre-clinical drug development and dosage form design through to the fabrication of functionalised implants and regenerative medicine. Within clinical pharmacy practice, printing technologies may finally lead to the concept of personalised medicines becoming a reality. This volume aims to be the definitive resource for anyone thinking of developing or using 3D printing technologies in the pharmaceutical sector, with a strong focus on the translation of printing technologies to a clinical setting. This text brings together leading experts to provide extensive information on an array of 3D printing techniques, reviewing the current printing technologies in the pharmaceutical manufacturing supply chain, in particular, highlighting the state-of-the-art applications in medicine and discussing modern drug product manufacture from a regulatory perspective. This book is a highly valuable resource for a range of demographics, including academic researchers and the pharmaceutical industry, providing a comprehensive inventory detailing the current and future applications of 3D printing in pharmaceuticals. Abdul W. Basit is Professor of Pharmaceutics at the UCL School of Pharmacy, University College London. Abdul’s research sits at the interface between pharmaceutical science and gastroenterology, forging links between basic science and clinical outcomes. He leads a large and multidisciplinary research group, and the goal of his work is to further the understanding of gastrointestinal physiology by fundamental research. So far, this knowledge has been translated into the design of new technologies and improved disease treatments, many of which are currently in late-stage clinical trials. He has published over 350 papers, book chapters and abstracts and delivered more than 250 invited research presentations. Abdul is also a serial entrepreneur and has filed 25 patents and founded 3 pharmaceutical companies (Kuecept, Intract Pharma, FabRx). Abdul is a frequent speaker at international conferences, serves as a consultant to many pharmaceutical companies and is on the advisory boards of scientific journals, healthcare organisations and charitable bodies. He is the European Editor of the International Journal of Pharmaceutics. Abdul was the recipient of the Young Investigator Award in Pharmaceutics and Pharmaceutical Technology from the American Association of Pharmaceutical Scientists (AAPS) and is the only non-North American scientist to receive this award. He was also the recipient of the Academy of Pharmaceutical Sciences (APS) award. Simon Gaisford holds a Chair in Pharmaceutics and is Head of the Department of Pharmaceutics at the UCL School of Pharmacy, University College London. He has published 110 papers, 8 book chapters and 4 authored books. His research is focused on novel technologies for manufacturing medicines, particularly using ink-jet printing and 3D printing, and he is an expert in the physico-chemical characterisation of compounds and formulations with thermal methods and calorimetry.

Download or read book Optimization Methods written by Marco Cavazzuti and published by Springer Science & Business Media. This book was released on 2012-09-11 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about optimization techniques and is subdivided into two parts. In the first part a wide overview on optimization theory is presented. Optimization is presented as being composed of five topics, namely: design of experiment, response surface modeling, deterministic optimization, stochastic optimization, and robust engineering design. Each chapter, after presenting the main techniques for each part, draws application oriented conclusions including didactic examples. In the second part some applications are presented to guide the reader through the process of setting up a few optimization exercises, analyzing critically the choices which are made step by step, and showing how the different topics that constitute the optimization theory can be used jointly in an optimization process. The applications which are presented are mainly in the field of thermodynamics and fluid dynamics due to the author's background.

Download or read book 3D Printing of Pharmaceuticals and Drug Delivery Devices written by Dimitrios A. Lamprou and published by MDPI. This book was released on 2020-07-01 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3D printing (3DP) process was patented in 1986; however, only in the last decade has it begun to be used for medical applications, as well as in the fields of prosthetics, bio-fabrication, and pharmaceutical printing. 3DP or additive manufacturing (AM) is a family of technologies that implement layer-by-layer processes in order to fabricate physical models based on a computer aided design (CAD) model. 3D printing permits the fabrication of high degrees of complexity with great reproducibility in a fast and cost-effective fashion. 3DP technology offers a new paradigm for the direct manufacture of individual dosage forms and has the potential to allow for variations in size and geometry as well as control dose and release behavior. Furthermore, the low cost and ease of use of 3DP systems means that the possibility of manufacturing medicines and medical devices at the point of dispensing or at the point of use could become a reality. 3DP thus offers the perfect innovative manufacturing route to address the critical capability gap that hinders the widespread exploitation of personalized medicines for molecules that are currently not easy to deliver. This Special Issue will address new developments in the area of 3D printing and bioprinting for drug delivery applications, covering the recent advantages and future directions of additive manufacturing for pharmaceutical products.

Download or read book Xanthan Gum written by Michelle Butler and published by Nova Publishers. This book was released on 2016 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: Xanthan gum is a microbial heteropolysaccharide of high molecular weight produced through fermentation by bacteria of the genus Xanthomonas that have a wide range of applications in food and non-food industries due to their physical properties and rheological characteristics. In this book, the first chapter discusses the characteristics, properties, and the use of xanthan gum in the food industry. Chapter Two provides a review of the use of xanthan gum in the nixtamalization process. Chapter Three focuses on the application of xanthan gum to formulate sustained release tablets and floating drug delivery systems. Chapter Four interprets and models the rheological behavior of oil-in-water emulsions stabilized singly with xanthan gum or combined with different hydrocolloids, like guar gum or potato starch. Chapter Five discusses the relevance of xanthan gum to formulate chickpea flour-based gluten-free batters and muffins.

Download or read book Remington Education Pharmaceutics written by Shelley Chambers Fox and published by Pharmaceutical Press. This book was released on 2014-06-25 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Remington Education: Pharmaceutics covers the basic principles of pharmaceutics, from dosage forms to drug delivery and targeting. It addresses all the principles covered in an introductory pharmacy course. As well as offering a summary of key information in pharmaceutics, it offers numerous case studies and MCQs for self assessment.

Download or read book Innovation in Pharmacy Advances and Perspectives September 2018 written by Organizer Committee IPAP18 – Salamanca and published by Ediciones Universidad de Salamanca. This book was released on 2018-09-21 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the summaries of the "Innovation in Pharmacy: Advances and Perspectives" that took place in Salamanca (Spain) in September 2018. The early science of chemistry and microbiology were the source of most drugs until the revolution of genetic engineering in the mid 1970s. Then biotechnology made available novel protein agents such as interferons, blood factors and monoclonal antibodies that have changed the modern pharmacy. Over the past year, a new pharmacy of oligonucleotides has emerged from the science of gene expression such as RNA splicing and RNA interference. The ability to design therapeutic agents from genomic sequences will transform treatment for many diseases. The science that created this advance and its future promise will be discussed. Phillip Allen Sharp is an American geneticist and molecular biologist who co-discovered RNA splicing. He shared the 1993 Nobel Prize in Physiology or Medicine with Richard J. Roberts for “the discovery that genes in eukaryotes are not contiguous strings but contain introns, and that the splicing of messenger RNA to delete those introns can occur in different ways, yielding different proteins from the same DNA sequence. He works in Institute Professor Koch Institute for Integrative Cancer Research, Massachusetts Institute of Technology (MIT), Cambridge, MA, US. Este libro recoge los resúmenes de la «Innovation in Pharmacy: Advances and Perspectives» que tuvo lugar en Salamanca (España) en septiembre de 2018. La ciencia primitiva de la química y la microbiología fue la fuente de la mayoría de las drogas hasta la revolución de la ingeniería genética a mediados de la década de 1970. Luego, la biotecnología puso a disposición agentes proteínicos novedosos como interferones, factores sanguíneos y anticuerpos monoclonales que han cambiado la farmacia moderna. Durante el año pasado, surgió una nueva farmacia de oligonucleótidos a partir de la ciencia de la expresión génica, como el empalme de ARN y la interferencia de ARN. La capacidad de diseñar agentes terapéuticos a partir de secuencias genómicas transformará el tratamiento de muchas enfermedades. La ciencia que creó este avance y su promesa futura será discutida. Phillip Allen Sharp es un genetista y biólogo molecular estadounidense que co-descubrió el empalme de ARN. Compartió el Premio Nobel de 1993 en Fisiología o Medicina con Richard J. Roberts por "el descubrimiento de que los genes en eucariotas no son cadenas contiguas, sino que contienen intrones, y que el empalme del ARN mensajero para eliminar esos intrones puede ocurrir de diferentes maneras, produciendo diferentes proteínas de la misma secuencia de ADN. Trabaja en el Instituto Profesor Koch Institute for Integrative Cancer Research, Instituto Tecnológico de Massachusetts (MIT), Cambridge, MA, EE. UU.

Download or read book Fundamentals and Applications of Controlled Release Drug Delivery written by Juergen Siepmann and published by Springer Science & Business Media. This book was released on 2011-12-15 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book approaches the subject from a mechanistic perspective that pitches the language at a level that is understandable to those entering the field and who are not familiar with its common phrases or complex terms. It provides a simple encapsulation of concepts and expands on them. In each chapter the basic concept is explained as simply and clearly as possible without a great deal of detail, then in subsequent sections additional material, exceptions to the general rule, examples, etc., is introduced and built up. Such material was generously supplemented with diagrams; conceptually elegant line diagrams in two or three colors. The artwork was well thought out and able to condense the scientific principles into a novel and visually exciting form. The diagrams encourage browsing or draw the reader to salient points. In addition, the technique of highlighting key concepts in a separate box is used throughout each chapter.

Download or read book Hydrogen bonded Interpolymer Complexes written by Vitaliy V. Khutoryanskiy and published by World Scientific. This book was released on 2009 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been an increased interest among researchers in hydrogen-bonded interpolymer complexes since the first pioneering papers were published in the early 1960s. Several hundred research papers have been published on various aspects of complex formation reactions in solutions and interfaces, properties of interpolymer complexes and their potential applications. This book focuses on the latest developments in the area of interpolymer complexation via hydrogen bonding. It represents a collection of original and review articles written by recognized experts from Germany, Greece, Kazakhstan, Poland, Romania, Russia, UK, Ukraine, and the USA. It highlights many important applications of interpolymer complexes, including the stabilization of colloidal systems, pharmaceuticals, and nanomaterials.

Download or read book Bioinspired and Biomimetic Materials for Drug Delivery written by Md Nurunnabi and published by Woodhead Publishing. This book was released on 2021-07-15 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioinspired and Biomimetic Materials for Drug Delivery delves into the potential of bioinspired materials in drug delivery, detailing each material type and its latest developments. In the last decade, biomimetic and bioinspired materials and technology has garnered increased attention in drug delivery research. Various material types including polymer, small molecular, protein, peptide, cholesterol, polysaccharide, nano-crystal and hybrid materials are widely considered in drug delivery research. However, biomimetic and bioinspired materials and technology have shown promising results for use in therapeutics, due to their high biocompatibility and reduced immunogenicity. Such materials include dopamine, extracellular exosome, bile acids, ionic liquids, and red blood cell. This book covers each of these materials in detail, reviewing their potential and usage in drug delivery. As such, this book will be a great source of information for biomaterials scientists, biomedical engineers and those working in pharmaceutical research. Explores latest developments for a broad range of bioinspired and biomimetic materials for drug delivery applications Helps researchers overcome the challenges of biocompatibility and immunogenicity in drug development Provides both theoretical and practical knowledge in regards to materials characterization and use in a range of drugs

Download or read book Molecularly Imprinted Polymers as Advanced Drug Delivery Systems written by Zhaosheng Liu and published by Springer Nature. This book was released on 2021-04-23 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the recent advancements for drug delivery systems (DDS) in terms of fundamental principles, rapidly emerging techniques and developing frontiers of molecular imprinting. Especially with the combination of enantioselective molecularly imprinted polymers and water compatible molecularly imprinted polymers, stimuli responsive imprinted DDS have been innovated and applied to dermal delivery, ophthalmic drugs and cancer treatment. This philosophy comprehensively revolutionizes the treatment strategy of human healthcare and provides the possibility to re-trigger in vivo an exhaust system after the complete release of the starting drug cargo, thus enabling precision medicine. To this end, the following unique features will be discussed and concluded: 1) State-of-the-art definition of MIP as drug delivery systems. 2) Advanced techniques and clinical applications of MIP as drug delivery systems in the past decade. 3) Novel frontiers and brand-new technologies, for example, drug delivery devices for zero-order sustained release and stimuli responsive imprinted DDS. 4) Revolutionary impact on dermal delivery, ophthalmic drugs and cancer treatment. 5) Future challenges and perspectives

Download or read book Applications of 3D printing in Biomedical Engineering written by Neeta Raj Sharma and published by Springer Nature. This book was released on 2021-04-21 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on applications of three-dimensional (3D) printing in healthcare. It first describes a range of biomaterials, including their physicochemical and biological properties. It then reviews the current state of the art in bioprinting techniques and the potential application of bioprinting, computer-aided additive manufacturing of cells, tissues, and scaffolds to create organs in regenerative medicine. Further, it discusses the orthopedic applications of 3D printing in the design and fabrication of dental implants, and the use of 3D bioprinting in oral and maxillofacial surgery and in tissue and organ engineering. Lastly, the book examines the 3D printing technologies that are used for the fabrication of the drug delivery system. It also explores the current challenges and the future of 3D bioprinting in medical sciences, as well as the market demand.

Download or read book Hot Melt Extrusion written by Dennis Douroumis and published by John Wiley & Sons. This book was released on 2012-04-24 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hot-melt extrusion (HME) - melting a substance and forcing it through an orifice under controlled conditions to form a new material - is an emerging processing technology in the pharmaceutical industry for the preparation of various dosage forms and drug delivery systems, for example granules and sustained release tablets. Hot-Melt Extrusion: Pharmaceutical Applications covers the main instrumentation, operation principles and theoretical background of HME. It then focuses on HME drug delivery systems, dosage forms and clinical studies (including pharmacokinetics and bioavailability) of HME products. Finally, the book includes some recent and novel HME applications, scale -up considerations and regulatory issues. Topics covered include: principles and die design of single screw extrusion twin screw extrusion techniques and practices in the laboratory and on production scale HME developments for the pharmaceutical industry solubility parameters for prediction of drug/polymer miscibility in HME formulations the influence of plasticizers in HME applications of polymethacrylate polymers in HME HME of ethylcellulose, hypromellose, and polyethylene oxide bioadhesion properties of polymeric films produced by HME taste masking using HME clinical studies, bioavailability and pharmacokinetics of HME products injection moulding and HME processing for pharmaceutical materials laminar dispersive & distributive mixing with dissolution and applications to HME technological considerations related to scale-up of HME processes devices and implant systems by HME an FDA perspective on HME product and process understanding improved process understanding and control of an HME process with near-infrared spectroscopy Hot-Melt Extrusion: Pharmaceutical Applications is an essential multidisciplinary guide to the emerging pharmaceutical uses of this processing technology for researchers in academia and industry working in drug formulation and delivery, pharmaceutical engineering and processing, and polymers and materials science. This is the first book from our brand new series Advances in Pharmaceutical Technology. Find out more about the series here.