Download or read book Applied Gaseous Fluid Drilling Engineering written by Boyun Guo and published by Gulf Professional Publishing. This book was released on 2021-09-23 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Gaseous Fluid Drilling Engineering: Design and Field Case Studies provides an introduction on the benefits of using gaseous fluid drilling engineering. In addition, the book describes the multi-phase systems needed, along with discussions on stability control. Safety and economic considerations are also included, as well as key components of surface equipment needed and how to properly select equipment depending on the type of fluid system. Rounding out with proven case studies that demonstrate good practices and lessons from failures, this book delivers a practical tool for understanding the guidelines and mitigations needed to utilize this valuable process and technology. - Helps readers gain a framework of understanding regarding the basic processes, technology and equipment needed for gaseous fluid drilling operations - Highlights benefits and challenges using drilling flow charts, photos of relevant equipment, and table comparisons of available fluid systems - Presents multiple case studies involving successful and unsuccessful operations

Download or read book Underbalanced Drilling Limits and Extremes written by Bill Rehm and published by Elsevier. This book was released on 2013-11-25 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present crude oil and natural gas reservoirs around the world have depleted conventional production levels. To continue enhancing productivity for the remaining mature reservoirs, drilling decision-makers could no longer rely on traditional balanced or overbalanced methods of drilling. Derived from conventional air drilling, underbalanced drilling is increasingly necessary to meet today’s energy and drilling needs. While more costly and extreme, underbalanced drilling can minimize pressure within the formation, increase drilling rate of penetration, reduce formation damage and lost circulation, making mature reservoirs once again viable and more productive. To further explain this essential drilling procedure, Bill Rehm, an experienced legend in drilling along with his co-editors, has compiled a handbook perfect for the drilling supervisor. Underbalanced Drilling: Limits and Extremes, written under the auspices of the IADC Technical Publications Committee, contain many great features and contributions including: Real case studies shared by major service companies to give the reader guidelines on what might happen in actual operations Questions and answers at the end of the chapters for upcoming engineers to test their knowledge Common procedures, typical and special equipment involved, and most importantly, the limits and challenges that still surround this technology

Download or read book Petroleum Engineer s Guide to Oil Field Chemicals and Fluids written by Johannes Fink and published by Gulf Professional Publishing. This book was released on 2011-05-13 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Engineer's Guide to Oil Field Chemicals and Fluids is a comprehensive manual that provides end users with information about oil field chemicals, such as drilling muds, corrosion and scale inhibitors, gelling agents and bacterial control. This book is an extension and update of Oil Field Chemicals published in 2003, and it presents a compilation of materials from literature and patents, arranged according to applications and the way a typical job is practiced. The text is composed of 23 chapters that cover oil field chemicals arranged according to their use. Each chapter follows a uniform template, starting with a brief overview of the chemical followed by reviews, monomers, polymerization, and fabrication. The different aspects of application, including safety and environmental impacts, for each chemical are also discussed throughout the chapters. The text also includes handy indices for trade names, acronyms and chemicals. Petroleum, production, drilling, completion, and operations engineers and managers will find this book invaluable for project management and production. Non-experts and students in petroleum engineering will also find this reference useful. - Chemicals are ordered by use including drilling muds, corrosion inhibitors, and bacteria control - Includes cutting edge chemicals and polymers such as water soluble polymers and viscosity control - Handy index of chemical substances as well as a general chemical index

Download or read book Composition and Properties of Drilling and Completion Fluids written by Ryen Caenn and published by Gulf Professional Publishing. This book was released on 2011-09-29 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: The petroleum industry in general has been dominated by engineers and production specialists. The upstream segment of the industry is dominated by drilling/completion engineers. Usually, neither of those disciplines have a great deal of training in the chemistry aspects of drilling and completing a well prior to its going on production. The chemistry of drilling fluids and completion fluids have a profound effect on the success of a well. For example, historically the drilling fluid costs to drill a well have averaged around 7% of the overall cost of the well, before completion. The successful delivery of up to 100% of that wellbore, in many cases may be attributable to the fluid used. Considered the "bible" of the industry, Composition and Properties of Drilling and Completion Fluids, first written by Walter Rogers in 1948, and updated on a regular basis thereafter, is a key tool to achieving successful delivery of the wellbore. In its Sixth Edition, Composition and Properties of Drilling and Completion Fluids has been updated and revised to incorporate new information on technology, economic, and political issues that have impacted the use of fluids to drill and complete oil and gas wells. With updated content on Completion Fluids and Reservoir Drilling Fluids, Health, Safety & Environment, Drilling Fluid Systems and Products, new fluid systems and additives from both chemical and engineering perspectives, Wellbore Stability, adding the new R&D on water-based muds, and with increased content on Equipment and Procedures for Evaluating Drilling Fluid Performance in light of the advent of digital technology and better manufacturing techniques, Composition and Properties of Drilling and Completion Fluids has been thoroughly updated to meet the drilling and completion engineer's needs. - Explains a myriad of new products and fluid systems - Cover the newest API/SI standards - New R&D on water-based muds - New emphases on Health, Safety & Environment - New Chapter on waste management and disposal

Download or read book Fundamentals of Sustainable Drilling Engineering written by M. E. Hossain and published by John Wiley & Sons. This book was released on 2015-02-04 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book clearly explains the concepts of the drilling engineering and presents the existing knowledge ranging from the history of drilling technology to well completion. This textbook takes on the difficult issue of sustainability in drilling engineering and tries to present the engineering terminologies in a clear manner so that the new hire, as well as the veteran driller, will be able to understand the drilling concepts with minimum effort. This textbook is an excellent resource for petroleum engineering students, drilling engineers, supervisors & managers, researchers and environmental engineers for planning every aspect of rig operations in the most sustainable, environmentally responsible manner, using the most up-to-date technological advancements in equipment and processes.

Download or read book Drilling Fluids Processing Handbook written by ASME Shale Shaker ASME Shale Shaker Committee and published by Elsevier. This book was released on 2011-03-15 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the Shale Shaker Committee of the American Society of Mechanical Engineers, originally of the American Association of Drilling Engineers, the authors of this book are some of the most well-respected names in the world for drilling. The first edition, Shale Shakers and Drilling Fluid Systems, was only on shale shakers, a very important piece of machinery on a drilling rig that removes drill cuttings. The original book has been much expanded to include many other aspects of drilling solids control, including chapters on drilling fluids, cut-point curves, mud cleaners, and many other pieces of equipment that were not covered in the original book. - Written by a team of more than 20 of the world's foremost drilling experts, from such companies as Shell, Conoco, Amoco, and BP - There has never been a book that pulls together such a vast array of materials and depth of topic coverage in the area of drilling fluids - Covers quickly changing technology that updates the drilling engineer on all of the latest equipment, fluids, and techniques

Download or read book Formation Damage during Improved Oil Recovery written by Bin Yuan and published by Gulf Professional Publishing. This book was released on 2018-05-31 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Formation Damage during Improved Oil Recovery: Fundamentals and Applications bridges the gap between theoretical knowledge and field practice by presenting information on formation damage issues that arise during enhanced oil recovery. Multi-contributed technical chapters include sections on modeling and simulation, lab experiments, field case studies, and newly proposed technologies and methods that are related to formation damage during secondary and tertiary recovery processes in both conventional and unconventional reservoirs. Focusing on both the fundamental theories related to EOR and formation damage, this reference helps engineers formulate integrated and systematic designs for applying EOR processes while also considering formation damage issues. - Presents the first complete reference addressing formation damage as a result of enhanced oil recovery - Provides the mechanisms for formation damage issues that are coupled with EOR - Suggests appropriate preventative actions or responses - Delivers a structured approach on how to understand the fundamental theories, practical challenges and solutions

Download or read book Advanced Well Completion Engineering written by Renpu Wan and published by Gulf Professional Publishing. This book was released on 2011-08-23 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: Once a natural gas or oil well is drilled, and it has been verified that commercially viable, it must be "completed" to allow for the flow of petroleum or natural gas out of the formation and up to the surface. This process includes: casing, pressure and temperature evaluation, and the proper instillation of equipment to ensure an efficient flow out of the well. In recent years, these processes have been greatly enhanced by new technologies. Advanced Well Completion Engineering summarizes and explains these advances while providing expert advice for deploying these new breakthrough engineering systems. The book has two themes: one, the idea of preventing damage, and preventing formation from drilling into an oil formation to putting the well introduction stage; and two, the utilization of nodal system analysis method, which optimizes the pressure distribution from reservoir to well head, and plays the sensitivity analysis to design the tubing diameters first and then the production casing size, so as to achieve whole system optimization. With this book, drilling and production engineers should be able to improve operational efficiency by applying the latest state of the art technology in all facets of well completion during development drilling-completion and work over operations. - One of the only books devoted to the key technologies for all major aspects of advanced well completion activities. - Unique coverage of all aspects of well completion activities based on 25 years in the exploration, production and completion industry. - Matchless in-depth technical advice for achieving operational excellence with advance solutions.

Download or read book Shale Shakers and Drilling Fluid Systems written by Gulf Publishing Company and published by Gulf Professional Publishing. This book was released on 1999 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction. Shale shaker design. Shale shaker selection. Cascade systems. Dry shakers. Shaker user's guide. Non-oilfield uses. Screen cloth. Screen panel technology. Appendixes: Solids control equipment. Dilution. Cutpoints. Comparison of shaker performances. Calculating drilled solids concentrations. Centrifugal pumps. Electric motors. Dewatering. API 13C. Pre-well checklist. Troubleshooting guide. Glossary. Shaker specifications. Shaker manufacturers. Screen manufacturers. Derrickman's pages.

Download or read book Development Geology Reference Manual written by Diana Morton-Thompson and published by AAPG. This book was released on 1993 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Air and Gas Drilling Manual written by William C. Lyons and published by Gulf Professional Publishing. This book was released on 2020-10-02 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Air and Gas Drilling Manual, Fourth Edition: Applications for Oil, Gas and Geothermal Fluid Recovery Wells, and Specialized Construction Boreholes, and the History and Advent of the Directional DTH delivers the fundamentals and current methods needed for engineers and managers engaged in drilling operations. Packed with updates, this reference discusses the engineering modelling and planning aspects of underbalanced drilling, the impacts of technological advances in high angle and horizontal drilling, and the importance of new production from shale. in addition, an in-depth discussion is included on well control model planning considerations for completions, along with detailed calculation examples using Mathcad. This book will update the petroleum and drilling engineer with a much-needed reference to stay on top of drilling methods and new applications in today's operations. Provides key drilling concepts and applications, including unconventional activity and directional well by gas drilling Updated with new information and data on managed pressure drilling, foam drilling, and aerated fluid drilling Includes practical appendices with Mathcad equation solutions

Download or read book Macondo Well Deepwater Horizon Blowout written by National Research Council and published by National Academies Press. This book was released on 2012-03-02 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: The blowout of the Macondo well on April 20, 2010, led to enormous consequences for the individuals involved in the drilling operations, and for their families. Eleven workers on the Deepwater Horizon drilling rig lost their lives and 16 others were seriously injured. There were also enormous consequences for the companies involved in the drilling operations, to the Gulf of Mexico environment, and to the economy of the region and beyond. The flow continued for nearly 3 months before the well could be completely killed, during which time, nearly 5 million barrels of oil spilled into the gulf. Macondo Well-Deepwater Horizon Blowout examines the causes of the blowout and provides a series of recommendations, for both the oil and gas industry and government regulators, intended to reduce the likelihood and impact of any future losses of well control during offshore drilling. According to this report, companies involved in offshore drilling should take a "system safety" approach to anticipating and managing possible dangers at every level of operation-from ensuring the integrity of wells to designing blowout preventers that function under all foreseeable conditions-in order to reduce the risk of another accident as catastrophic as the Deepwater Horizon explosion and oil spill. In addition, an enhanced regulatory approach should combine strong industry safety goals with mandatory oversight at critical points during drilling operations. Macondo Well-Deepwater Horizon Blowout discusses ultimate responsibility and accountability for well integrity and safety of offshore equipment, formal system safety education and training of personnel engaged in offshore drilling, and guidelines that should be established so that well designs incorporate protection against the various credible risks associated with the drilling and abandonment process. This book will be of interest to professionals in the oil and gas industry, government decision makers, environmental advocacy groups, and others who seek an understanding of the processes involved in order to ensure safety in undertakings of this nature.

Download or read book Formulas and Calculations for Drilling Operations written by James G. Speight and published by John Wiley & Sons. This book was released on 2018-04-10 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Newly revised, this is still the "must have" guide for any drilling, production, or petroleum engineer, with thousands of handy formulas and calculations that the engineer needs on a daily basis. Presented in an easy-to-use format, this second edition of Formulas and Calculations for Drilling Operations is a quick reference for day-to-day work out on the rig. It also serves as a handy study guide for drilling and well control certification courses. Virtually all the mathematics required on a drilling rig is here in one convenient source, including formulas for pressure gradient, specific gravity, pump, output, annular velocity, buoyancy factor, and many other topics. Whether open on your desk, on the hood of your truck at the well, or on an offshore platform, this is the only book available that covers the gamut of the formulas and calculations for petroleum engineers that have been compiled over decades. Some of these formulas and calculations have been used for decades, while others are meant to help guide the engineer through some of the more recent breakthroughs in the industry's technology, such as hydraulic fracturing and enhanced oil recovery. There is no other source for these useful formulas and calculations that is this thorough. An instant classic when the first edition was published, the much-improved revision is even better, offering new information not available in the first edition, making it as up-to-date as possible in book form. Truly a state-of-the-art masterpiece for the oil and gas industry, if there is only one book you buy to help you do your job, this is it!

Download or read book Machine Learning Applications in Subsurface Energy Resource Management written by Srikanta Mishra and published by CRC Press. This book was released on 2022-12-27 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: The utilization of machine learning (ML) techniques to understand hidden patterns and build data-driven predictive models from complex multivariate datasets is rapidly increasing in many applied science and engineering disciplines, including geo-energy. Motivated by these developments, Machine Learning Applications in Subsurface Energy Resource Management presents a current snapshot of the state of the art and future outlook for ML applications to manage subsurface energy resources (e.g., oil and gas, geologic carbon sequestration, and geothermal energy). Covers ML applications across multiple application domains (reservoir characterization, drilling, production, reservoir modeling, and predictive maintenance) Offers a variety of perspectives from authors representing operating companies, universities, and research organizations Provides an array of case studies illustrating the latest applications of several ML techniques Includes a literature review and future outlook for each application domain This book is targeted at practicing petroleum engineers or geoscientists interested in developing a broad understanding of ML applications across several subsurface domains. It is also aimed as a supplementary reading for graduate-level courses and will also appeal to professionals and researchers working with hydrogeology and nuclear waste disposal.

Download or read book Air and Gas Drilling Manual written by William C. Lyons and published by Gulf Professional Publishing. This book was released on 2020-09-22 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Air and Gas Drilling Manual, Fourth Edition: Applications for Oil, Gas and Geothermal Fluid Recovery Wells, and Specialized Construction Boreholes, and the History and Advent of the Directional DTH delivers the fundamentals and current methods needed for engineers and managers engaged in drilling operations. Packed with updates, this reference discusses the engineering modelling and planning aspects of underbalanced drilling, the impacts of technological advances in high angle and horizontal drilling, and the importance of new production from shale. in addition, an in-depth discussion is included on well control model planning considerations for completions, along with detailed calculation examples using Mathcad. This book will update the petroleum and drilling engineer with a much-needed reference to stay on top of drilling methods and new applications in today's operations. - Provides key drilling concepts and applications, including unconventional activity and directional well by gas drilling - Updated with new information and data on managed pressure drilling, foam drilling, and aerated fluid drilling - Includes practical appendices with Mathcad equation solutions

Download or read book Emulsions Foams Suspensions and Aerosols written by Laurier L. Schramm and published by John Wiley & Sons. This book was released on 2014-08-12 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to provide an integrated introduction to the nature, formation and occurrence, stability, propagation, and uses of the most common types of colloidal dispersion in the process-related industries. The primary focus is on the applications of the principles, paying attention to practical processes and problems. This is done both as part of the treatment of the fundamentals, where appropriate, and also in the separate sections devoted to specifi c kinds of industries. Throughout, the treatment is integrated, with the principles of colloid and interface science common to each dispersion type presented for each major physical property class, followed by separate treatments of features unique to emulsions, foams, or suspensions. The first half of the book introduces the fundamental principles, introducing readers to suspension formation and stability, characterization, and fl ow properties, emphasizing practical aspects throughout. The following chapters discuss a wide range of industrial applications and examples, serving to emphasize the diff erent methodologies that have been successfully applied. The author assumes no prior knowledge of colloid chemistry and, with its glossary of key terms, complete cross-referencing and indexing, this is a must-have for graduate and professional scientists and engineers who may encounter or use emulsions, foams, or suspensions, or combinations thereof, whether in process design, industrial production, or in related R&D fields.

Download or read book Composition and Properties of Drilling and Completion Fluids written by Ryen Caenn and published by Gulf Professional Publishing. This book was released on 2016-11-11 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composition and Properties of Drilling and Completion Fluids