Download or read book Formation and Properties of Juvenile Wood in Southern Pines written by and published by . This book was released on 2001 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: To satisfy the increasing demand for forest products, much of the future timber supply will be from improved trees grown on managed plantations. This fast-grown resource will tend to be harvested in short age rotations and will contain higher proportions of juvenile wood than that of current harvests. In anticipation of this resource, definitive information is needed on the influence of juvenile wood on lumber properties so that grading rules and the associated allowable design stresses can be modified as needed. This document reports the results of an extensive review of the literature on juvenile wood in southern pines. This report defines and discusses the extent, occurrence, and characteristics of juvenile wood. It reviews the effects that environment and silviculture have on the amount of juvenile wood produced. Finally, the impacts that juvenile wood has on mechanical properties were quantified. The results of this quantification are significant to all producers of fast-grown plantations. Research has clearly shown that juvenile wood will have a detrimental impact on allowable design stresses for visually graded lumber. It is critical that methods are developed to more carefully manage fast-grown plantation wood for its most efficient use. This review should serve as an overall collection of knowledge pertaining to juvenile wood research in southern pines and should help in the decision-making efforts to improve seedling selection techniques and silvicultural practices to maximize the potential for fast-grown plantations of southern pines.
Download or read book Forest Products and Wood Science written by Rubin Shmulsky and published by John Wiley & Sons. This book was released on 2011-07-26 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition of this book offers a fully revised and updated review of the forest products industry. This important text covers the full spectrum of the subject, basing itself in a thorough understanding of the anatomical and physical nature of wood and providing a special emphasis on its use as an industrial raw material. Forest and biomass researchers are provided with comprehensive coverage of all aspects of wood science and industry, ranging from tree growth and wood anatomy to a variety of economically important wood products.
Download or read book Research Paper FPL RP written by and published by . This book was released on 1986 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dividends from Wood Research written by and published by . This book was released on 2001-07 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Properties of Major Southern Pines written by Harold E. Wahlgren and published by . This book was released on 1972 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wood Structure and Properties 06 written by Stanislav Kurjatko and published by Arbora Publishers. This book was released on 2006 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling Forest Trees and Stands written by Harold E. Burkhart and published by Springer Science & Business Media. This book was released on 2012-04-27 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawing upon a wealth of past research and results, this book provides a comprehensive summary of state-of-the-art methods for empirical modeling of forest trees and stands. It opens by describing methods for quantifying individual trees, progresses to a thorough coverage of whole-stand, size-class and individual-tree approaches for modeling forest stand dynamics, growth and yield, moves on to methods for incorporating response to silvicultural treatments and wood quality characteristics in forest growth and yield models, and concludes with a discussion on evaluating and implementing growth and yield models. Ideal for use in graduate-level forestry courses, this book also provides ready access to a plethora of reference material for researchers working in growth and yield modeling.
Download or read book Progress in Adhesion and Adhesives Volume 4 written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2019-07-11 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: A solid collection of interdisciplinary review articles on the latest developments in adhesion science and adhesives technology With the ever-increasing amount of research being published, it is a Herculean task to be fully conversant with the latest research developments in any field, and the arena of adhesion and adhesives is no exception. Thus, topical review articles provide an alternate and very efficient way to stay abreast of the state-of-the-art in many subjects representing the field of adhesion science and adhesives. Based on the success of the preceding volumes in this series "Progress in Adhesion and Adhesives"), the present volume comprises 9 review articles published in Volume 6 (2018) of Reviews of Adhesion and Adhesives. The subject of these reviews fall into the following general areas: 1. Adhesion to wood and wood bonds 2. Adhesive joints 3. Adhesion in microelectronic packaging 4. Surface modification 5. Contact angle, wettability and surface free energy. The topics covered include: Adhesion phenomena in microelectronic packaging; adhesives for wood and lignocellulosic materials; adhesion to wood and lignocellulosic materials; adhesively bonded lap joints having bi-adhesive and modulus-graded bondlines; adhesion between compounded elastomers; applications of contact angle measurements in pharmaceuticals and foods; oxygen or ammonia plasma treatment of polyolefin surfaces; surface free energy determination of powders and particles; wood bonds; and dispersion adhesion forces between macroscopic objects.
Download or read book Handbook of Wood Chemistry and Wood Composites written by Roger M. Rowell and published by CRC Press. This book was released on 2012-09-06 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood has played a major role throughout human history. Strong and versatile, the earliest humans used wood to make shelters, cook food, construct tools, build boats, and make weapons. Recently, scientists, politicians, and economists have renewed their interest in wood because of its unique properties, aesthetics, availability, abundance, and perha
Download or read book Wood Quality and its Biological Basis written by John Barnett and published by John Wiley & Sons. This book was released on 2009-02-18 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood is the most versatile raw material available to man. It isburned as fuel, shaped into utensils, used as a structuralengineering material, converted into fibres for paper production,and put to newer uses as a source of industrial chemicals. Its quality results largely from the chemical and physicalstructure of the cell walls of its component fibres, which can bemodified in nature as the tree responds to physical environmentalstresses. Internal stresses can accumulate, which are releasedcatastrophically when the tree is felled, often rendering thetimber useless. The quality of timber as an engineering materialalso depends on the structure of the wood and the way in which ithas developed in the living tree. Tree improvement for quality cannot be carried out without anunderstanding of the biological basis underlying wood formation andstructure. This volume brings together the viewpoints of bothbiologists and physical scientists, covering the spectrum from theformation of wood to its structure and properties, and relatingthese properties to industrial use. This is a volume for researchers and professionals in plantphysiology, molecular biology and biochemistry.
Download or read book Tree Biotechnology written by Kishan Gopal Ramawat and published by CRC Press. This book was released on 2014-04-01 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Forest trees cover 30% of the earth's land surface, providing renewable fuel, wood, timber, shelter, fruits, leaves, bark, roots, and are source of medicinal products in addition to benefits such as carbon sequestration, water shed protection, and habitat for 1/3 of terrestrial species. However, the genetic analysis and breeding of trees has lagged behind that of crop plants. Therefore, systematic conservation, sustainable improvement and pragmatic utilization of trees are global priorities. This book provides comprehensive and up to date information about tree characterization, biological understanding, and improvement through biotechnological and molecular tools.
Download or read book Proceedings of the Biennial Southern Silvicultural Research Conference written by and published by . This book was released on 1989 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Fifth Biennial Southern Silvicultural Research Conference written by and published by . This book was released on 1989 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Properties of Major Southern Pines written by and published by . This book was released on 1975 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Loblolly Pine written by Robert P. Schultz and published by U.S. Government Printing Office. This book was released on 1997 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Juvenile Wood in Forest Trees written by Bruce J. Zobel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: The trend in forestry is toward shorter rotations and more complete utiliza tion of trees. The reasons are: (1) financial pressures to obtain rapid returns on the forestry investment made possible by an earlier harvest; (2) enforced harvest of young plantations to maintain a continuing supply of cellulose for mills where wood shortages are experienced; (3) thinning young plantations, both because they were planted too densely initially and because thinning is done where long rotation quality trees are the forestry goal; (4) more intensive utilization is being done using tops and small diameter trees; and (5) there is interest in using young (juvenile) wood for special products because of its unique characteristics and the development of new technologies. The largest present-day source of conifer juvenile wood is from thinnings of plantations where millions of hectares of pine were planted too densely. Because of the better growth rate resulting from improved silviculture and good genetic stock, plantations will need to be thinned heavily. As a result of this trend, young wood makes up an increasingly larger proportion of the total conifer wood supply each year. Large amounts of juvenile wood from hard woods are also currently available, especially in the tropics and subtropics, because of the fast growth rate of the species used, which results in shorter rotations and ess~ntially all juvenile wood.
Download or read book Agriculture Handbook written by and published by . This book was released on 1997 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Set includes revised editions of some issues.
