Download or read book Forest Health and Biotechnology written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-04-01 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: The American chestnut, whitebark pine, and several species of ash in the eastern United States are just a few of the North American tree species that have been functionally lost or are in jeopardy of being lost due to outbreaks of pathogens and insect pests. New pressures in this century are putting even more trees at risk. Expanded human mobility and global trade are providing pathways for the introduction of nonnative pests for which native tree species may lack resistance. At the same time, climate change is extending the geographic range of both native and nonnative pest species. Biotechnology has the potential to help mitigate threats to North American forests from insects and pathogens through the introduction of pest-resistant traits to forest trees. However, challenges remain: the genetic mechanisms that underlie trees' resistance to pests are poorly understood; the complexity of tree genomes makes incorporating genetic changes a slow and difficult task; and there is a lack of information on the effects of releasing new genotypes into the environment. Forest Health and Biotechnology examines the potential use of biotechnology for mitigating threats to forest tree health and identifies the ecological, economic, and social implications of deploying biotechnology in forests. This report also develops a research agenda to address knowledge gaps about the application of the technology.

Download or read book Applications of Biotechnology in Forestry and Horticulture written by V. Dhawan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Major and exciting changes have taken place recently in various aspects of bio technology and its applications to forestry. Even more exciting is the prospect of major innovations that the entire field of biotechnology holds for plant growth in general. The importance of these developments for the forestry sector is considerable, particu larly since forestry science has not received the kinds of technical and R&D inputs that, say, agriculture has received in the past few decades. Y ct the problems of defor estation as well as stagnation in yields and productivity of existing forests throughout the world are becoming increasingly apparent, with consequences and ecological ef fects that cause growing worldwide concern. Policies for application of existing knowl edge in biotechnology to the field of forestry and priorities for future research and development are, therefore, of considerable value, because it is only through the adop tion of the right priorities and enlightened policies that scientific developments will move along the right direction, leading to improvements in forestry practices through out the world. It was against this backdrop that the Tata Energy Research Institute (TERI) or ganised a major international workshop on the "Applications of Biotechnology in For estry and Horticulture" at New Delhi in January 1988. The present volume covers the proceedings of this international workshop.

Download or read book Forest Products Biotechnology written by Alan Bruce and published by CRC Press. This book was released on 2002-09-10 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industries are developing radical, new biotechnology processes to expand and develop their range of products that originate from the world's forests. As a result of the growing understanding of the process involved, biotechnology is also helping reduce any adverse impact on the environment.; This book presents a review of specialist research directed towards efficient and environmentally sensitive use of forests. An introductory chapter explaining the structure and anatomy of wood is followed by a chapter-by-chapter review of the most current developments on individual topics associated with a wide range of forest products such as timber, trees, pulp and paper, drugs and valuable chemicals. In addition, chapters focus on the ways of resolving some of the environmental problems faced by these industries.

Download or read book Forest Genomics and Biotechnology written by Isabel Allona and published by Frontiers Media SA. This book was released on 2019-11-27 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Research Topic addresses research in genomics and biotechnology to improve the growth and quality of forest trees for wood, pulp, biorefineries and carbon capture. Forests are the world’s greatest repository of terrestrial biomass and biodiversity. Forests serve critical ecological services, supporting the preservation of fauna and flora, and water resources. Planted forests also offer a renewable source of timber, for pulp and paper production, and the biorefinery. Despite their fundamental role for society, thousands of hectares of forests are lost annually due to deforestation, pests, pathogens and urban development. As a consequence, there is an increasing need to develop trees that are more productive under lower inputs, while understanding how they adapt to the environment and respond to biotic and abiotic stress. Forest genomics and biotechnology, disciplines that study the genetic composition of trees and the methods required to modify them, began over a quarter of a century ago with the development of the first genetic maps and establishment of early methods of genetic transformation. Since then, genomics and biotechnology have impacted all research areas of forestry. Genome analyses of tree populations have uncovered genes involved in adaptation and response to biotic and abiotic stress. Genes that regulate growth and development have been identified, and in many cases their mechanisms of action have been described. Genetic transformation is now widely used to understand the roles of genes and to develop germplasm that is more suitable for commercial tree plantations. However, in contrast to many annual crops that have benefited from centuries of domestication and extensive genomic and biotechnology research, in forestry the field is still in its infancy. Thus, tremendous opportunities remain unexplored. This Research Topic aims to briefly summarize recent findings, to discuss long-term goals and to think ahead about future developments and how this can be applied to improve growth and quality of forest trees.

Download or read book The Bioengineered Forest written by Steven H. Strauss and published by Routledge. This book was released on 2010-09-30 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioengineering offers many opportunities for forestry. Bioengineered trees can produce more valuable wood, help reclaim contaminated land, improve the health of urban trees, and facilitate pest management. But the ecological risks are complex, and public views about the ethical acceptability of genetic engineering vary widely. Unique in its breadth and diversity, The Bioengineered Forest begins with a survey of the range of forestry practices for which the use of biotechnologies might be appropriate. Scholars representing diverse academic perspectives and viewpoints examine in depth the economic and environmental rationale for forest biotechnologies and the current state of technology with respect to gene performance and safety. They consider the contemporary political and economic environment in which bioengineering is being introduced and where the 'genomic revolution' might take forestry and genetic engineering in the future. The Bioengineered Forest presents compelling arguments in favor of genetic engineering. Just as powerfully, it examines the significant technical and legal hurdles involved in genetic engineering, the undesirable environmental and social consequences that might result from its misapplication, and the risks for businesses that are looking too exclusively for near-term benefits.

Download or read book Agricultural Forestry and Bioindustry Biotechnology and Biodiscovery written by Pablo A. Chong and published by Springer Nature. This book was released on 2020-08-29 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food security, crop protection, biodiversity, and human and environmental health are among the main needs and concerns of society. Modern biotechnology and life sciences represent a constantly evolving area that is key for the rational use of natural resources – resources that in turn are indispensable for societal development. This book features the outcomes of the IV International Biotechnology and Biodiversity Congress, held in Guayaquil, Ecuador, 2018. It includes extensive reviews of the trends in agricultural and forestry biotechnology, molecules and materials biodiscovery, ethnomedicine, environmental impact and bioindustry research, describing many of these topics from the Latin America perspective and showing how the biodiversity and ancient knowledge of these countries are vital for worldwide sustainable development.

Download or read book Microbes in Agri Forestry Biotechnology written by Gustavo Molina and published by CRC Press. This book was released on 2022-09-22 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores recent advances on the use of microbes for agri-forestry biotechnological applications. It provides technical concepts and discussions on the use of microorganisms for processes such as bioprocessing, bioremediation, soil enhancement, aquaponics advances, and plant-host symbiosis. The book provides an overview of the microbial approach to the tools and processes used in agriculture and forestry that make or modify products, improve plants for specific uses, and make use of livestock in agricultural systems. The authors discuss the main process conditions that enhance agri-forestry applications with the use of microbes and introduce the use of genetically modified (GM) microbes in agrobiotechnology. Finally, the authors explore the main technological advances in the production of secondary metabolites with potential applications in agri-forestry. This book is intended for biotechnologists, biologists, bioengineers, biochemists, microbiologists, food technologists, enzymologists, and related researchers.

Download or read book Biotechnology Applications in Forestry written by Fred O Asiegbu and published by Academic Press. This book was released on 2025-01-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biotechnology Applications in Forestry: Forest Microbiology Volume 4 is a comprehensive exploration of harnessing the unique attributes of the microbes in the forest biome and their tree hosts. The volume begins with a brief historical perspective on biotechnology and it’s applications in forestry, the volume introduces the basics of genomics, applied bioinformatics and next generation sequencing, providing a firm foundation before moving to specific approach, application and use chapters. The fourth volume in the Forest Microbiology series, Biotechnology Applications in Forestry explores opportunities through the use of genetics to expand or improve on many of these positive attributes of forest trees and associated organisms including adaptation to climate change as well as resilience to biotic and abiotic stressors. Novel techniques and current advances in the application of modern biotechniques in tree health protection, mushroom technology, biological control, biochar, bioenergy, Isolate & strain selection, metabolic engineering and commercial application relevant for forest ecosystem are also addressed.

Download or read book Cell and Tissue Culture in Forestry written by J.M. Bonga and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2. 2. Plant materials 2. 3. Pregrowth conditions 2. 4. Cryoprotectant treatment 2. 5. Freezing 2. 5. 1. Slow freezing 2. 5. 2. Rapid freezing 2. 5. 3. Droplet freezing 2. 6. Storage 2. 7. Thawing 2. 8. Viability testing 2. 9. Post-thaw regrowth 3. EXAMPLES OF CRYOPRESERVATION OF WOODY PLANT MATERIAL 4. POTENTIAL APPLICATION OF CRYOPRESERVATION IN TREE IMPROVEMENT 17. NURSERY HANDLING OF PROPAGULES - J. A. Driver, and 320 G. R. L. Suttle 1. INTRODUCTION 2. COMMERCIAL NURSERY NEEDS VS. LABORATORY PRACTICE 3. SEASONALITY OF GROWTH AND PRODUCTION CYCLES 4. MICROPROPAGATION OPTIONS 4. 1. Trends in commercial micropropagation 4. 1. 1. Contract micropropagation 5. FACTORS AFFECTING SURVIVAL AND GROWTH 5. 1. Hardening of propagules in vitro 5. 2. Greenhouse considerationS------ 5. 3. Field planting 5. 4. New approaches: Direct field rooting 5. 4. 1. Pretreatment in vitro 5. 4. 2. Root induction 5. 4. 3. Field placement 18. MYCORRHIZAE - R. K. Dixon, and D. H. Marx 336 1. INTRODUCTION 2. ROLE OF MYCORRHIZAE IN TREE GROWTH AND DEVELOPMENT 3. PRODUCTION AND APPLICATION OF ECTOMYCORRHIZAL FUNGUS INOCULUM 3. 1. Bareroot stock 3. 2. Container-grown stock 4. FIELD TRIALS WITH ECTOMYCORRHIZAL PLANTING STOCK 5. PRODUCTION AND APPLICATION OF ENDOMYCORRHIZAL INOCULUM 6. FIELD TRIALS WITH ENDOMYCORRHIZAL 7. RESEARCH OPPORTUNITIES 8. SUMMARY 351 19. TISSUE CULTURE APPLICATIUN TO FOREST PATHOLOGY AND PEST CONTROL - A. M. Diner, and D. F. Karnosky 1. INTRODUCTION 2. HOST AND PATHOGEN: CULTURE AND CHALLENGE 2. 1.

Download or read book Clonal Forestry I written by Mulkh-Raj Ahuja and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clonal forestry has come of age. Basic techniques in genetics and biotechnology of other organisms are generally applicable to forest trees. However, there are some differences, in particular in the juvenile- and maturation-related regeneration. Examined here are crucial topics of juvenility, maturation and rejuvenation in clonal propagation of trees. In addition, the genetics of clones, population biology of clonal deployment, propagation and field testing of clones, clone identification, clonal physiology, regeneration and variation in plant tissue cultures, the role of somatic embryogenesis in clonal forestry, and recent developments in biotechnology, including the molecular structure of trees and gene transfer are covered in depth.

Download or read book Genetic Modification of Plants written by Frank Kempken and published by Springer Science & Business Media. This book was released on 2009-12-15 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conceived with the aim of sorting fact from fiction over genetically modified (GM) crops, this book brings together the knowledge of 30 specialists in the field of transgenic plants. It covers the generation and detection of these plants as well as the genetic traits conferred on transgenic plants. In addition, the book looks at a wide variety of crops, ornamental plants and tree species that are subject to genetic modifications, assessing the risks involved in genetic modification as well as the potential economic benefits of the technology in specific cases. The book’s structure, with fully cross-referenced chapters, gives readers a quick access to specific topics, whether that is comprehensive data on particular species of ornamentals, or coverage of the socioeconomic implications of GM technology. With an increasing demand for bioenergy, and the necessary higher yields relying on wider genetic variation, this book supplies all the technical details required to move forward to a new era in agriculture.

Download or read book Cell and Tissue Culture in Forestry written by J.M. Bonga and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first edition of our book "Tissue Culture in Fores try" in 1982 we have witnessed remarkable advances in cell and tissue culture technologies with woody perennials. In addition to forest biologists in government, industry, and universities, we now have molecular biologists, genetic engineers, and biochemists using cell and tissue cultures of woody species routinely. There fore, the time has come for an update of the earlier edition. In our present effort to cover new developments we have expanded to three volumes: 1. General principles and Biotechnology 2. Specific Principles and Methods: Growth and Development 3. Case Histories: Gymnosperms, Angiosperms and Palms The scientific barriers to progress in tree improvement are not so much lack of foreign gene expression in plants but our current inabili ty to regenerate plants in true-to-type fashion on a mas sive and economic scale. To achieve this in the form of an appro pr iate biotechnology, cell and tissue culture will increasing ly require a better understanding of basic principles in chemistry and physics that determine structural and functional relationships among molecules and macromolecules (proteins, RNA, DNA) within cells and tissues. These principles and their relationship with the culture medium and its physical environment, principles of clonal propagation, and genetic variation and ultrastructure are discussed in volume one.

Download or read book Biotechnology Forestry and Forest Products written by Raymond Dobert and published by . This book was released on 1995 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Biotechnology Forestry and Forest Products written by Lara Wiggert and published by . This book was released on 1993 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Forest Biotechnology written by and published by . This book was released on 1991 with total page 2 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Trees I written by Y. P. S. Bajaj and published by . This book was released on 1986 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Biosafety of Forest Transgenic Trees written by Cristina Vettori and published by Springer. This book was released on 2016-02-20 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides up-to-date information on the environmental impact of transgenic trees on genetically modified tree (GMT) communication strategy. It is useful to public/private organisations as well as to private and public research bodies and universities worldwide since it reports on the global status of GMT research and policy. A high number of genetically modified trees (GMTs) with altered or novel characteristics have been produced in the last 15 years. However, their very low public acceptance is a basic problem in their commercialization. Breeders anticipate economic and ecological benefits, like reduced product costs and less pressure on native forests, while opponents fear risks, such as unintended spread of GMTs. But what is true? To answer this question, the COST Action FP0905 focused on key aspects related to GMTs: (a) biological characterization; (b) assessment of possible environmental impacts; (c) socio-economic implications and public acceptance/concerns; (d) providing science-based information to communicate with the public.