Download or read book Food Processing Technology written by P.J. Fellows and published by Elsevier. This book was released on 2009-06-22 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of Food processing technology was quickly adopted as the standard text by many food science and technology courses. This completely revised and updated third edition consolidates the position of this textbook as the best single-volume introduction to food manufacturing technologies available. This edition has been updated and extended to include the many developments that have taken place since the second edition was published. In particular, advances in microprocessor control of equipment, ‘minimal’ processing technologies, functional foods, developments in ‘active’ or ‘intelligent’ packaging, and storage and distribution logistics are described. Technologies that relate to cost savings, environmental improvement or enhanced product quality are highlighted. Additionally, sections in each chapter on the impact of processing on food-borne micro-organisms are included for the first time. Introduces a range of processing techniques that are used in food manufacturing Explains the key principles of each process, including the equipment used and the effects of processing on micro-organisms that contaminate foods Describes post-processing operations, including packaging and distribution logistics

Download or read book Innovative Food Processing Technologies written by and published by Elsevier. This book was released on 2020-08-18 with total page 2482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food process engineering, a branch of both food science and chemical engineering, has evolved over the years since its inception and still is a rapidly changing discipline. While traditionally the main objective of food process engineering was preservation and stabilization, the focus today has shifted to enhance health aspects, flavour and taste, nutrition, sustainable production, food security and also to ensure more diversity for the increasing demand of consumers. The food industry is becoming increasingly competitive and dynamic, and strives to develop high quality, freshly prepared food products. To achieve this objective, food manufacturers are today presented with a growing array of new technologies that have the potential to improve, or replace, conventional processing technologies, to deliver higher quality and better consumer targeted food products, which meet many, if not all, of the demands of the modern consumer. These new, or innovative, technologies are in various stages of development, including some still at the R&D stage, and others that have been commercialised as alternatives to conventional processing technologies. Food process engineering comprises a series of unit operations traditionally applied in the food industry. One major component of these operations relates to the application of heat, directly or indirectly, to provide foods free from pathogenic microorganisms, but also to enhance or intensify other processes, such as extraction, separation or modification of components. The last three decades have also witnessed the advent and adaptation of several operations, processes, and techniques aimed at producing high quality foods, with minimum alteration of sensory and nutritive properties. Some of these innovative technologies have significantly reduced the thermal component in food processing, offering alternative nonthermal methods. Food Processing Technologies: A Comprehensive Review, Three Volume Set covers the latest advances in innovative and nonthermal processing, such as high pressure, pulsed electric fields, radiofrequency, high intensity pulsed light, ultrasound, irradiation and new hurdle technology. Each section will have an introductory article covering the basic principles and applications of each technology, and in-depth articles covering the currently available equipment (and/or the current state of development), food quality and safety, application to various sectors, food laws and regulations, consumer acceptance, advancements and future scope. It will also contain case studies and examples to illustrate state-of-the-art applications. Each section will serve as an excellent reference to food industry professionals involved in the processing of a wide range of food categories, e.g., meat, seafood, beverage, dairy, eggs, fruits and vegetable products, spices, herbs among others.

Download or read book Conventional and Advanced Food Processing Technologies written by Suvendu Bhattacharya and published by John Wiley & Sons. This book was released on 2014-11-17 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food processing technologies are an essential link in the food chain. These technologies are many and varied, changing in popularity with changing consumption patterns and product popularity. Newer process technologies are also being evolved to provide the added advantages. Conventional and Advanced Food Processing Technologies fuses the practical (application, machinery), theoretical (model, equation) and cutting-edge (recent trends), making it ideal for industrial, academic and reference use. It consists of two sections, one covering conventional or well-established existing processes and the other covering emerging or novel process technologies that are expected to be employed in the near future for the processing of foods in the commercial sector. All are examined in great detail, considering their current and future applications with added examples and the very latest data. Conventional and Advanced Food Processing Technologies is a comprehensive treatment of the current state of knowledge on food processing technology. In its extensive coverage, and the selection of reputed research scientists who have contributed to each topic, this book will be a definitive text in this field for students, food professionals and researchers.

Download or read book Nonthermal Processing Technologies for Food written by Howard Q. Zhang and published by John Wiley & Sons. This book was released on 2011-02-04 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonthermal Processing Technologies for Food offers a comprehensive review of nonthermal processing technologies that are commercial, emerging or over the horizon. In addition to the broad coverage, leading experts in each technology serve as chapter authors to provide depth of coverage. Technologies covered include: physical processes, such as high pressure processing (HPP); electromagnetic processes, such as pulsed electric field (PEF), irradiation, and UV treatment; other nonthermal processes, such as ozone and chlorine dioxide gas phase treatment; and combination processes. Of special interest are chapters that focus on the "pathway to commercialization" for selected emerging technologies where a pathway exists or is clearly identified. These chapters provide examples and case studies of how new and nonthermal processing technologies may be commercialized. Overall, the book provides systematic knowledge to industrial readers, with numerous examples of process design to serve as a reference book. Researchers, professors and upper level students will also find the book a valuable text on the subject.

Download or read book Food Processing Technologies written by Amit K. Jaiswal and published by CRC Press. This book was released on 2016-08-05 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: The processing of food generally implies the transformation of the perishable raw food to value-added products. It imparts benefits, such as the destruction of surface microflora, and inactivation of deleterious enzymes, such as peroxidase, leading to a greater shelf life of the food. It also enhances color and texture while maintaining quality of products and makes them edible. However, it also has an inevitable impact on nutritional quality attributes, such as increase or decrease in certain vitamins and bioactive metabolites among others. Food Processing Technologies: Impact on Product Attributes covers a range of food processing technologies and their effect on various food product attributes, such as bioactive compounds, safety, and sensory and nutritional aspects of the food upon processing. There are eight major parts in the book. Part I covers the conventional processing technologies. Parts II, III, IV, and V deal with various novel processing technologies, including impingement processing technologies, electro-magnetic processing technologies, physico-mechanical processing technologies, and electro-technologies. Part VI introduces chemical processing technologies. Part VII comprise irradiation processing technology, and the final part is focused on biological processing technology, detailing the application of enzymes in food processing. Numerous studies were carried out to find the impact of these processing technologies on various aspects of food and associated health promotion properties. Both positive and negative results were obtained based on nature of foods, processing type, and duration of processing, and this book covers these results in depth.

Download or read book Novel Food Processing Technologies written by Vikas Nanda and published by New India Publishing Agency. This book was released on 2017-05-22 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is likely to cover the innovative technologies such as non-thermal technology, nano-technology, non-invasive analysis of foods, newer methods of extraction, the recent know-how of food packaging, etc. This book will be very useful to everyone working in the area of food to upgrade their knowledge regarding various aspects of the latest processing technologies. The compilation, in particular, is not absolutely based on any specific lecture course. However, it will definitely serve as one of the affluent manuscript in supporting too many course outlines related to advanced food technologies prevailing in many academic institutions. This book will generate the interest of many courses including Emerging Technologies in Food Processing, Novel Food Processing Technologies, Advances in Food Technology etc. Hence it will fulfill the high demand for food scientists and technologists in upcoming years and will gain popularity throughout the world. This will be an asset to all the readers thriving to upgrade their knowledge and utilize it for the betterment of mankind. The readers will get acquainted with latest happenings and its details in all aspects of food, thereby will add new dimensions to the basic research strategies. Academicians, researchers and students will get ready references to enhance their proficiency for emerging techniques in processing of foods since it is the compilation of novel technologies with all the details required.

Download or read book Health and Safety Aspects of Food Processing Technologies written by Abdul Malik and published by Springer Nature. This book was released on 2019-10-31 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food processing is expected to affect content, activity and bioavailability of nutrients; the health-promoting capacity of food products depends on their processing history. Traditional technologies, such as the use of antimicrobials and thermal processing, are efficient in increasing nutritional value to an extent, though they may not be effective at addressing food safety, particularly when it comes to maintaining the food's molecular structure. Modern food processing plants improve the quality of life for people with allergies, diabetics, and others who cannot consume some common food elements. Food processing can also add extra nutrients, such as vitamins. Processed foods are often less susceptible to early spoilage than fresh foods and are better suited for long-distance transportation from the source to the consumer. However, food processing can also decrease the nutritional value of foods and introduce hazards not encountered with naturally occurring products. Processed foods often include food additives, such as flavourings and texture-enhancing agents, which may have little or no nutritive value, and may in fact be unhealthy. This book deals with the subject of food processing in a unique way, providing an overview not only of current techniques in food processing and preservation (i.e., dairy, meat, cereal, vegetables, fruits and juice processing, etc.) but also the health and safety aspects: food technologies that improve nutritional quality of foods, functional foods, and nanotechnology in the food and agriculture industry. The text also looks into the future by defining current bottlenecks and future research goals. This work will serve as a ready reference for the subject matter to students and researchers alike.

Download or read book Innovative Food Processing Technologies written by Kai Knoerzer and published by Woodhead Publishing. This book was released on 2016-06-29 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovative Food Processing Technologies: Extraction, Separation, Component Modification and Process Intensification focuses on advances in new and novel non-thermal processing technologies which allow food producers to modify and process food with minimal damage to the foodstuffs. The book is highly focused on the application of new and novel technologies, beginning with an introductory chapter, and then detailing technologies which can be used to extract food components. Further sections on the use of technologies to modify the structure of food and the separation of food components are also included, with a final section focusing on process intensification and enhancement. Provides information on a variety of food processing technologies Focuses on advances in new and novel non-thermal processing technologies which allow food producers to modify and process food with minimal damage to the foodstuffs Presents a strong focus on the application of technologies in a variety of situations Created by editors who have a background in both the industry and academia

Download or read book Integrated Processing Technologies for Food and Agricultural By Products written by Zhongli Pan and published by Academic Press. This book was released on 2019-07-13 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Feeding our globally expanding population is one of the most critical challenges of our time and improving food and agricultural production efficiencies is a key factor in solving this problem. Currently, one-third of food produced for humans is wasted, and for every pound of food produced, roughly an equal amount of nonfood by-product is also generated, creating a significant environmental impact. In Integrated Processing Technologies for Food and Agricultural By-Products experts from around the world present latest developments, recognizing that while some by-products have found use as animal feed or are combusted for energy, new technologies which integrate conversion of production and processing by-products into higher-value food or nonfood products, nutraceuticals, chemicals, and energy resources will be a critical part of the transition to a more sustainable food system. Organized by agricultural crop, and focusing on those crops with maximum economic impact, each chapter describes technologies for value-added processing of by-products which can be integrated into current food production systems. Integrated Processing Technologies for Food and Agricultural By-Products is a valuable resource for industry professionals, academics, and policy-makers alike. Provides production-through-processing coverage of key agricultural crops for a thorough understanding and translational inspiration Describes and discusses major by-product sources, including physical and chemical biomass characterizations and associated variability in detail Highlights conversions accomplished through physical, biological, chemical, or thermal methods and demonstrates examples of those technologies

Download or read book Green Technologies in Food Production and Processing written by Joyce Boye and published by Springer Science & Business Media. This book was released on 2012-01-11 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will review the current status of the agriculture and agri-food sector in regard to green processing and provide strategies that can be used by the sector to enhance the use of environmentally-friendly technologies for production, processing. The book will look at the full spectrum from farm to fork beginning with chapters on life cycle analysis and environmental impact assessment of different agri-food sectors. This will be followed by reviews of current and novel on-farm practices that are more environmentally-friendly, technologies for food processing that reduce chemical and energy use and emissions as well as novel analytical techniques for R&D and QA which reduce solvent, chemical and energy consumption. Technologies for waste treatment, "reducing, reusing, recycling", and better water and energy stewardship will be reviewed. In addition, the last section of the book will attempt to look at technologies and processes that reduce the generation of process-induced toxins (e.g., trans fats, acrylamide, D-amino acids) and will address consumer perceptions about current and emerging technologies available to tackle these processing and environmental issues.

Download or read book Emerging Technologies for Food Processing written by Da-Wen Sun and published by Elsevier. This book was released on 2014-08-14 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Emerging Technologies in Food Processing presents essential, authoritative, and complete literature and research data from the past ten years. It is a complete resource offering the latest technological innovations in food processing today, and includes vital information in research and development for the food processing industry. It covers the latest advances in non-thermal processing including high pressure, pulsed electric fields, radiofrequency, high intensity pulsed light, ultrasound, irradiation, and addresses the newest hurdles in technology where extensive research has been carried out. Provides an extensive list of research sources to further research development Presents current and thorough research results and critical reviews Includes the most recent technologies used for shelf life extension, bioprocessing simulation and optimization

Download or read book Novel Food Processing Technologies written by Gustavo V. Barbosa-Canovas and published by CRC Press. This book was released on 2004-11-30 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting current trends in alternative food processing and preservation, this reference explores the most recent applications in pulsed electric field (PEF) and high-pressure technologies, food microbiology, and modern thermal and nonthermal operations to prevent the occurrence of food-borne pathogens, extend the shelf-life of foods, and improve

Download or read book Minimal Processing Technologies in the Food Industries written by T Ohlsson and published by Elsevier. This book was released on 2002-07-26 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emergence of ‘minimal’ processing techniques, which have a limited impact on a food’s nutritional and sensory properties, has been a major new development in the food industry. This book provides an authoritative review of the range of minimal techniques currently available, their applications and safety and quality issues. Reviews the range of minimal processing techniques, their advantages and disadvantages and their use in food production Discusses the range of thermal technologies, such as infrared heating, ohmic heating, and dielectric methods, including the use of microwaves Presents alternatives to thermal processing, ranging from irradiation to high pressure processing and the use of pulsed electric fields

Download or read book Thermal Technologies in Food Processing written by P Richardson and published by Elsevier. This book was released on 2001-04-24 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal technologies have long been at the heart of food processing. The application of heat is both an important method of preserving foods and a means of developing texture, flavour and colour. An essential issue for food manufacturers is the effective application of thermal technologies to achieve these objectives without damaging other desirable sensory and nutritional qualities in a food product. Edited by a leading authority in the field, and with a distinguished international team of contributors, Thermal technologies in food processing addresses this major issue. Part one of the collection begins with reviews of conventional retort and continuous heat technologies. Part two then looks at the key issues of effective measurement and control in ensuring that a thermal process is effective whilst minimising any undesirable changes in a food. There are chapters on temperature and pressure measurement, validation of heat processes, modelling and simulation of thermal processes, and the measurement and control of changes in a food during thermal processing. The final part of the book looks at emerging thermal technologies which becoming more widely used in the food industry. There are chapters on radio frequency heating, microwave processing, infrared heating, instant and high-heat infusion, and ohmic heating A final chapter considers how thermal processing may be combined with high pressure processing in producing safe, minimally-processed food products. Thermal technologies in food processing provides food manufacturers and researchers with an authoritative review of thermal processing and food quality.

Download or read book Case Studies in Novel Food Processing Technologies written by C J Doona and published by Elsevier. This book was released on 2010-10-28 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Novel food processing technologies have significant potential to improve product quality and process efficiency. Commercialisation of new products and processes brings exciting opportunities and interesting challenges. Case studies in novel food processing technologies provides insightful, first-hand experiences of many pioneering experts involved in the development and commercialisation of foods produced by novel processing technologies. Part one presents case studies of commercial products preserved with the leading nonthermal technologies of high pressure processing and pulsed electric field processing. Part two broadens the case histories to include alternative novel techniques, such as dense phase carbon dioxide, ozone, ultrasonics, cool plasma, and infrared technologies, which are applied in food preservation sectors ranging from fresh produce, to juices, to disinfestation. Part three covers novel food preservation techniques using natural antimicrobials, novel food packaging technologies, and oxygen depleted storage techniques. Part four contains case studies of innovations in retort technology, microwave heating, and predictive modelling that compare thermal versus non-thermal processes, and evaluate an accelerated 3-year challenge test. With its team of distinguished editors and international contributors, Case studies in novel food processing technologies is an essential reference for professionals in industry, academia, and government involved in all aspects of research, development and commercialisation of novel food processing technologies. Provides insightful, first-hand experiences of many pioneering experts involved in the development and commercialisation of foods produced by novel processing technologies Presents case studies of commercial products preserved with the leading nonthermal technologies of high pressure processing and pulsed electric field processing Features alternative novel techniques, such as dense phase carbon dioxide, ozone, ultrasonics, cool plasma, and infrared technologies utilised in food preservation sectors

Download or read book Advances in Food Processing Technology written by Jingdun Jia and published by Springer. This book was released on 2019-06-01 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to essential advances in the application of physical processing technology in food processing that have been made in recent years. It analyzes and describes the application of Power Ultrasound, Pulsed Electric Field, Supercritical-CO2, and Infrared Heating in the contexts of food sterilization, extraction, modification, drying and safety control. Covering all aspects of food physical processing, from basic principles to the latest technological developments, it offers a valuable application guide for food engineers and food researchers alike.

Download or read book Innovative Food Processing Technologies written by Kai Knoerzer, PhD and published by John Wiley & Sons. This book was released on 2011-01-31 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of the IFT (Institute of Food Technologists) series, this book discusses multiphysics modeling and its application in the development, optimization, and scale-up of emerging food processing technologies. The book covers recent research outcomes to demonstrate process efficiency and the impact on scalability, safety, and quality, and technologies including High Pressure Processing, High Pressure Thermal Sterilization, Radiofrequency, Ultrasound, Ultraviolet, and Pulsed Electric Fields Processing. Ideal for food and process engineers, food technologists, equipment designers, microbiologists, and research and development personnel, this book covers the importance and the methods for applying multiphysics modeling for the design, development, and application of these technologies.