Download or read book Food Safety in Food Manufacturing vol 2 written by and published by Sarah Wilmcow. This book was released on with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling Food Processing Operations written by Serafim Bakalis and published by Elsevier. This book was released on 2015-04-28 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational modeling is an important tool for understanding and improving food processing and manufacturing. It is used for many different purposes, including process design and process optimization. However, modeling goes beyond the process and can include applications to understand and optimize food storage and the food supply chain, and to perform a life cycle analysis. Modeling Food Processing Operations provides a comprehensive overview of the various applications of modeling in conventional food processing. The needs of industry, current practices, and state-of-the-art technologies are examined, and case studies are provided. Part One provides an introduction to the topic, with a particular focus on modeling and simulation strategies in food processing operations. Part Two reviews the modeling of various food processes involving heating and cooling. These processes include: thermal inactivation; sterilization and pasteurization; drying; baking; frying; and chilled and frozen food processing, storage and display. Part Three examines the modeling of multiphase unit operations such as membrane separation, extrusion processes and food digestion, and reviews models used to optimize food distribution. - Comprehensively reviews the various applications of modeling in conventional food processing - Examines the modeling of multiphase unit operations and various food processes involving heating and cooling - Analyzes the models used to optimize food distribution
Download or read book Food Processing Technology written by P.J. Fellows and published by Elsevier. This book was released on 2009-06-22 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of Food processing technology was quickly adopted as the standard text by many food science and technology courses. This completely revised and updated third edition consolidates the position of this textbook as the best single-volume introduction to food manufacturing technologies available. This edition has been updated and extended to include the many developments that have taken place since the second edition was published. In particular, advances in microprocessor control of equipment, 'minimal' processing technologies, functional foods, developments in 'active' or 'intelligent' packaging, and storage and distribution logistics are described. Technologies that relate to cost savings, environmental improvement or enhanced product quality are highlighted. Additionally, sections in each chapter on the impact of processing on food-borne micro-organisms are included for the first time. - Introduces a range of processing techniques that are used in food manufacturing - Explains the key principles of each process, including the equipment used and the effects of processing on micro-organisms that contaminate foods - Describes post-processing operations, including packaging and distribution logistics
Download or read book Computerized Food Processing Operations written by Arthur A. Teixeira and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed to explain and illustrate how food processing op erations can be made more efficient and profitable through the application of computers in the laboratory, pilot plant, and production plant floor of industrial food processing plants. It is intended to provide a sufficient un derstanding of how computer system concepts can be applied to food pro cessing operations to permit technical managers, with the assistance of food engineering professionals, to identify, develop, and implement com puter applications to meet their own specific needs. The book should also serve as a useful text or guide for students in food engineering or food technology seeking a practical course on food process automation at the undergraduate-graduate level interface. The material covered includes the use of microcomputers for automated data acquisition and analysis in the laboratory and pilot plant, followed by the use of computer-based process control systems on the production plant floor. Higher-level applications are also included to illustrate the use of engineering software containing mathematical models for computer simulation, optimization, and intelligent on-line control of specific food processing unit operations.
Download or read book Food Processing Handbook written by James G. Brennan and published by John Wiley & Sons. This book was released on 2012-05-07 with total page 829 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the Food Processing Handbook presents a comprehensive review of technologies, procedures and innovations in food processing, stressing topics vital to the food industry today and pinpointing the trends in future research and development. Focusing on the technology involved, this handbook describes the principles and the equipment used as well as the changes - physical, chemical, microbiological and organoleptic - that occur during food preservation. In so doing, the text covers in detail such techniques as post-harvest handling, thermal processing, evaporation and dehydration, freezing, irradiation, high-pressure processing, emerging technologies and packaging. Separation and conversion operations widely used in the food industry are also covered as are the processes of baking, extrusion and frying. In addition, it addresses current concerns about the safety of processed foods (including HACCP systems, traceability and hygienic design of plant) and control of food processes, as well as the impact of processing on the environment, water and waste treatment, lean manufacturing and the roles of nanotechnology and fermentation in food processing. This two-volume set is a must-have for scientists and engineers involved in food manufacture, research and development in both industry and academia, as well as students of food-related topics at undergraduate and postgraduate levels. From Reviews on the First Edition: "This work should become a standard text for students of food technology, and is worthy of a place on the bookshelf of anybody involved in the production of foods." Journal of Dairy Technology, August 2008 "This work will serve well as an excellent course resource or reference as it has well-written explanations for those new to the field and detailed equations for those needing greater depth." CHOICE, September 2006
Download or read book Postharvest and Postmortem Processing of Raw Food Materials written by Seid Mahdi Jafari and published by Woodhead Publishing. This book was released on 2021-11-26 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Postharvest and Postmortem Processing of Raw Food Materials, a volume in the Unit Operations and Processing Equipment in the Food Industry series, presents the processing operations and handling of agricultural crops, animal products, and raw food materials after their harvesting/slaughtering and entrance into food production factories. Chapters in this new release cover an Introduction to postharvest and postmortem technology, Primary operations in postharvest processing, Disintegration of raw agricultural crops, Disintegration with little changes in form (Husking, Shelling, Pitting, Coring, Snipping and Destemming), Disintegration with considerable changes in form (Cutting/dicing, crashing and grinding, Slaughtering, Shredding, Sheeting), and much more. Written by experts in the field of food engineering, and in a simple and dynamic way, this book targets all who are engaged in food processing operations worldwide, giving readers good knowledge on the basics of food engineering principles and applications. - Thoroughly explores novel applications of postharvest/postmortem operations in processing food products - Brings perspectives about the postharvest processing of different agricultural crops and postmortem processing of different animal meats - Helps to improve the quality and safety of food products with postharvest/postmortem operations
Download or read book Food Process Engineering written by Dennis R. Heldman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second Edition of Food Process Engineering by Dr. Dennis Heldman, my former student, and co-author Paul Singh, his former student, attests to the importance of the previous edition. In the Foreword to the First Edition, I noted the need for people in all facets of the food processing industry to consider those variables of design of particular importance in engineering for the food processing field. In addition to recognizing the many variables involved in the biological food product being handled from production to consumption, the engi neer must oftentimes adapt equations developed for non-biological materials. As more and more research is done, those equations are appropriately modified to be more accurate or new equations are developed specifically for designing to process foods. This Edition updates equations used. This book serves a very important need in acquainting engineers and technologists, particularly those with a math ematics and physics background, with the information necessary to provide a more efficient design to accomplish the objectives. Of prime importance, at present and in the future, is to design for efficient use of energy. Now, it is often economical to put considerably more money into first costs for an efficient design than previously, when energy costs were a much smaller proportion of the total cost of process engineering.
Download or read book Handbook of Food Products Manufacturing Volume 2 written by Y. H. Hui and published by John Wiley & Sons. This book was released on 2007-04-27 with total page 1252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative reference covers food-manufacturing principles, and details the processing and manufacturing of products in the fields of: Health, Meat, Milk, Poultry, Seafood, and Vegetables. * Includes an overview of food manufacturing principles * Presents details of commercial processing for each commodity including (where appropriate) a general introduction, ingredients, technologies, types and evaluation of industrial products, special problems, types and evaluation of consumer products, and processing and product trends * For each commodity, information includes the details of commercial processing of several representative foods.
Download or read book Handbook of Food Processing Equipment written by George Saravacos and published by Springer. This book was released on 2015-12-29 with total page 781 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text covers the design of food processing equipment based on key unit operations, such as heating, cooling, and drying. In addition, mechanical processing operations such as separations, transport, storage, and packaging of food materials, as well as an introduction to food processes and food processing plants are discussed. Handbook of Food Processing Equipment is an essential reference for food engineers and food technologists working in the food process industries, as well as for designers of process plants. The book also serves as a basic reference for food process engineering students.The chapters cover engineering and economic issues for all important steps in food processing. This research is based on the physical properties of food, the analytical expressions of transport phenomena, and the description of typical equipment used in food processing. Illustrations that explain the structure and operation of industrial food processing equipment are presented. style="font-size: 13.3333330154419px;">The materials of construction and fabrication of food processing equipment are covered here, as well as the selection of the appropriate equipment for various food processing operations. Mechanical processing equipment such as size reduction, size enlargement, homogenization, and mixing are discussed. Mechanical separations equipment such as filters, centrifuges, presses, and solids/air systems, plus equipment for industrial food processing such as heat transfer, evaporation, dehydration, refrigeration, freezing, thermal processing, and dehydration, are presented. Equipment for novel food processes such as high pressure processing, are discussed. The appendices include conversion of units, selected thermophysical properties, plant utilities, and an extensive list of manufacturers and suppliers of food equipment.
Download or read book Engineering Principles of Unit Operations in Food Processing written by Seid Mahdi Jafari and published by Woodhead Publishing. This book was released on 2021-06-22 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Principles of Unit Operations in Food Processing, volume 1 in the Woodhead Publishing Series, In Unit Operations and Processing Equipment in the Food Industry series, presents basic principles of food engineering with an emphasis on unit operations, such as heat transfer, mass transfer and fluid mechanics. - Brings new opportunities in the optimization of food processing operations - Thoroughly explores applications of food engineering to food processes - Focuses on unit operations from an engineering viewpoint
Download or read book Food Processing Operations Modeling written by Soojin Jun and published by CRC Press. This book was released on 2008-11-27 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: The food industry is on the verge of making some serious advances in the food processing sector. If successful, tomorrow's consumers will have unhindered access to safe, nutritious, and high-quality products via novel food processing technologies. Food Processing Operations Modeling: Design and Analysis, Second Edition demonstrates how to effective
Download or read book Food Process Engineering Operations written by George D. Saravacos and published by CRC Press. This book was released on 2011-04-11 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique and interdisciplinary field, food processing must meet basic process engineering considerations such as material and energy balances, as well as the more specialized requirements of food acceptance, human nutrition, and food safety. Food engineering, therefore, is a field of major concern to university departments of food science, and chemical and biological engineering as well as engineers and scientists working in various food processing industries. Part of the notable CRC Press Contemporary Food Engineering series, Food Process Engineering Operations focuses on the application of chemical engineering unit operations to the handling, processing, packaging, and distribution of food products. Chapters 1 through 5 open the text with a review of the fundamentals of process engineering and food processing technology, with typical examples of food process applications. The body of the book then covers food process engineering operations in detail, including theory, process equipment, engineering operations, and application examples and problems. Based on the authors’ long teaching and research experience both in the US and Greece, this highly accessible textbook employs simple diagrams to illustrate the mechanism of each operation and the main components of the process equipment. It uses simplified calculations requiring only elementary calculus and offers realistic values of food engineering properties taken from the published literature and the authors’ experience. The appendix contains useful engineering data for process calculations, such as steam tables, engineering properties, engineering diagrams, and suppliers of process equipment. Designed as a one or two semester textbook for food science students, Food Process Engineering Operations examines the applications of process engineering fundamentals to food processing technology making it an important reference for students of chemical and biological engineering interested in food engineering, and for scientists, engineers, and technologists working in food processing industries.
Download or read book World Food Problem written by Professor Miloslav Rechcigl and published by CRC Press. This book was released on 2018-01-10 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this publication is to provide the interested reader with an authoritative and comprehensive up-to-date bibliography on all important facets of the world food problem, encompassing such questions as the availability of natural reseources, the present and future sources of energy, environmental quality, population growth, world malnutrition, the state of food production, food consumption patterns, future food needs, toxicological aspects of food, agricultural and industrial aspects of food production, and family planning. It is the first compilation of its kind in that it covers the subject from a multidisciplinary point of view, including publications that deal with teh description and alaysis of the world food problem as well as those that offer alternative strategies adn specific technological meaures for alleviating the problem.
Download or read book Post Harvest Technology of Horticultural Crops written by K. P. Sudheer and published by New India Publishing. This book was released on 2007 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book post harvest technology assumes great attention during recent years since preservation of agricultural produce is a basic necessity to sustain agricultural production. It helps to add value of produce, thus having great scope for employment generation at the production catchments. In this book, the authors have attempted to consolidate different methods of post harvest technology of fruits and vegetables focusing on recent advances. This book will benefit both practicing food technologist/post harvest technologist who are searching for answers to critical technical questions of post harvest technology. Further, it will be useful to agricultural engineers, food processors, food scientist, researchers and progressive farmers and tom those who are working in relevant fields. it is intended to fill a gap in presently available post harvest technology literature
Download or read book Poultry Products Technology written by VivianE Mountney and published by Routledge. This book was released on 2017-10-06 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its third edition, this classic volume characterizes the science and technology of the poultry industry today, defines the breadth and scope of the overall problems in the industry, and points out areas where more research is needed. With special attention to recent changes in the industry, the nearly two dozen updated chapters of Poultry Products Technology provide a comprehensive overview of the field, examining topics which deal with the processing, handling, marketing, and preparation of poultry meat, products, and by-products. Poultry Products Technology provides up-to-date information and references for food scientists, food technologists, dieticians, and others trained in the food service industry, who will at some point handle poultry products. This book supplies knowledge about how poultry and eggs are processed and prepared and how they can be used for optimum portions and services. The breadth of topics covered, as listed below, make it an ideal text for those just entering the field, for individuals who wish to learn about the work in a particular area before starting extensive research, and for those in the industry who require specific information for making decisions and projecting plans for the future: quality identification--grades and standards quality maintenance--handling and processing poultry and eggs to prevent grade losses chemical and nutritive characteristics of poultry meat and eggs microbiology of eggs and poultry meat methods of preservation--freezing, drying, refrigeration, radiation, canning, smoking cooking poultry meat and eggs handling and uses of inedible by-products methods of analysis of eggs and egg products During the last twenty years, the consumption of poultry meat has and continues to increase while the consumption of eggs has steadily decreased, yet both are still considered good econ
Download or read book Advances in Food Rheology and Its Applications written by Jasim Ahmed and published by Woodhead Publishing. This book was released on 2016-09-13 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Food Rheology and Its Applications presents the latest advances in the measurement and application of food rheology, one of the most important tools for food companies when characterizing ingredients and final products, and a predictor of product performance and consumer acceptance. Split into two main focuses, the book gives in-depth analysis of the general advances in the field, with coverage of the relationship between food microstructure and rheology, the use of tribology in the study of oral processing, the use of large amplitude oscillatory shear (LAOS) measurement and Fourier-transform rheology in food, and the influence of fibers and particle size distribution on food rheology, as well as many other advances. Written by a leading international team of authors, the book provides an in-depth and state-of-the-art coverage of this essential topic on the consumer acceptance of food. - Brings together top researchers in the field of rheology, providing in-depth and state-of-the-art coverage on an area of study essential for managing the quality of foods and gaining consumer acceptance - Presents in-depth coverage of advances in rheology, many of which have never been featured before, including tribology, large amplitude oscillatory shear measurement, and the influence of fibers and particle size distribution on food rheology - Contains information that is highly relevant to the industrialist who wants to improve the rheological properties of the foods with which they are working
Download or read book The Stability and Shelf Life of Food written by Persis Subramaniam and published by Woodhead Publishing. This book was released on 2016-05-24 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of The Stability and Shelf-life of Food is a fully revised and thoroughly updated edition of this highly-successful book. This new edition covers methods for shelf-life and stability evaluation, reviewing the modelling and testing of the deterioration of products as well as the use of sensory evaluation methods for testing food spoilage. The first part of the book focuses on deteriorative processes and factors influencing shelf-life, covering aspects such as chemical deterioration, physical instability and microbiological spoilage. The effects of process and packaging on the stability and shelf-life of products are also covered in this part. Part Two reviews the methods for shelf life and stability evaluation. These include sensory evaluation methods and instrumental methods to determine food quality deterioration. The final section of the book covers stability of important ingredient categories, from oils and fats, to beverages such as beer, wine, coffee and fruit juices, in addition to bakery products and meats. With updated chapters reflecting advances made in the field and with the addition of new chapters covering the stability and shelf-life a variety of products, this new edition will provide the latest research for both academics working in the field of food quality as well as providing essential information for food scientists working in industry. - Thoroughly revised and updated edition of a very popular and well regarded book - Includes dedicated chapters covering the shelf-life and stability of specific products making this book ideal for those working in industry - Presents a wide coverage of the processes and factors influencing shelf-life, the evaluation of stability and shelf-life and the stability and shelf-life of particular products makes this book valuable for both academics and those working in industry
