Download or read book Focus on Nanotube Research written by Delores A. Martin and published by Nova Publishers. This book was released on 2006 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: A novel way of arranging the atomic structure of a substance so that it can be made thousands of times stronger than in its native state. Often used to make duranium a further ten thousand times stronger. Thus, a lump of duranium can be made over ten million times stronger than the equivalent block of titanium. A one dimensional fullerene (a convex cage of atoms with only hexagonal and/ or pentagonal faces) with a cylindrical shape. Carbon nanotubes discovered in 1991 by Sumio Iijima resemble rolled up graphite, although they can not really be made that way. Depending on the direction that the tubes appear to have been rolled (quantified by the 'chiral vector'), they are known to act as conductors or semiconductors. Nanotubes are a proving to be useful as molecular components for nanotechnology. This book assembles and presents new and important research in the field.
Download or read book Carbon Nanotube Science written by Peter J. F. Harris and published by Cambridge University Press. This book was released on 2009-03-19 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes represent one of the most exciting research areas in modern science. These molecular-scale carbon tubes are the stiffest and strongest fibres known, with remarkable electronic properties, and potential applications in a wide range of fields. Carbon Nanotube Science is a concise, accessible book, presenting the basic knowledge that graduates and researchers need to know. Based on the successful Carbon Nanotubes and Related Structures, this book focuses solely on carbon nanotubes, covering the major advances made in recent years in this rapidly developing field. Chapters focus on electronic properties, chemical and bimolecular functionalisation, nanotube composites and nanotube-based probes and sensors. The book begins with a comprehensive discussion of synthesis, purification and processing methods. With its comprehensive coverage of this active research field, this book will appeal to researchers in a broad range of disciplines, including nanotechnology, engineering, materials science and physics.
Download or read book Carbon Nanotube Reinforced Polymers written by Roham Rafiee and published by Elsevier. This book was released on 2017-10-06 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotube-Reinforced Polymers: From Nanoscale to Macroscale addresses the advances in nanotechnology that have led to the development of a new class of composite materials known as CNT-reinforced polymers. The low density and high aspect ratio, together with their exceptional mechanical, electrical and thermal properties, render carbon nanotubes as a good reinforcing agent for composites. In addition, these simulation and modeling techniques play a significant role in characterizing their properties and understanding their mechanical behavior, and are thus discussed and demonstrated in this comprehensive book that presents the state-of-the-art research in the field of modeling, characterization and processing. The book separates the theoretical studies on the mechanical properties of CNTs and their composites into atomistic modeling and continuum mechanics-based approaches, including both analytical and numerical ones, along with multi-scale modeling techniques. Different efforts have been done in this field to address the mechanical behavior of isolated CNTs and their composites by numerous researchers, signaling that this area of study is ongoing. Explains modeling approaches to carbon nanotubes, together with their application, strengths and limitations Outlines the properties of different carbon nanotube-based composites, exploring how they are used in the mechanical and structural components Analyzes the behavior of carbon nanotube-based composites in different conditions
Download or read book Carbon Nanotubes written by Ado Jorio and published by Springer Science & Business Media. This book was released on 2007-12-18 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the success of its predecessor, Carbon Nanotubes: Synthesis, Structure, Properties and Applications, this second volume focuses on those areas that have grown rapidly in the past few years. Contributing authors reflect the multidisciplinary nature of the book and are all leaders in their particular areas of research. Among the many topics they cover are graphene and other carbon-like and tube-like materials, which are likely to affect and influence developments in nanotubes within the next five years. Extensive use of illustrations enables you to better understand and visualize key concepts and processes.
Download or read book Carbon Nanotubes written by A. K. HAGHI and published by Apple Academic Press. This book was released on 2021-03-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the diversity of recent advances in carbon nanotubes from a broad perspective that will be useful for scientists as well as for graduate students and engineers. Presenting leading-edge research in this dynamic field, this volume is an introduction to the physical concepts needed for investigating carbon nanotubes and other one-dimensional solid-state systems. Written for a wide scientific readership, each chapter consists of an instructive approach to the topic and sustainable ideas for solutions. Carbon nanotubes, with their extraordinary mechanical and unique electronic properties, have garnered much attention in recent years. With a broad range of potential applications, including nanoelectronics, composites, chemical sensors, biosensors, microscopy, nanoelectromechanical systems, and many more, the scientific community is more motivated than ever to move beyond basic properties and explore the real issues associated with carbon nanotube-based applications. Carbon nanotubes are exceptionally interesting from a fundamental research point of view. They open up new perspectives for various applications, such as nano-transistors in circuits, field-emission displays, artificial muscles, or added reinforcements in alloys. This book reviews the recent progress in modeling of carbon nanotubes and their composites. The advantages and disadvantages of different methods are discussed. The ability of continuum methods to bridge different scales is emphasized. Recommendations for future research are given by focusing on what each method has to learn from the nano-scale. The scope of the book is to provide current knowledge aiming to support researchers entering the scientific area of carbon nanotubes to choose the appropriate modeling tool for accomplishing their study and place their efforts to further improve continuum methods.
Download or read book Carbon Nanotubes and Graphene written by Kazuyoshi Tanaka and published by Newnes. This book was released on 2014-07-10 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotubes and Graphene is a timely second edition of the original Science and Technology of Carbon Nanotubes. Updated to include expanded coverage of the preparation, purification, structural characterization, and common application areas of single- and multi-walled CNT structures, this work compares, contrasts, and, where appropriate, unitizes CNT to graphene. This much expanded second edition reference supports knowledge discovery, production of impactful carbon research, encourages transition between research fields, and aids the formation of emergent applications. New chapters encompass recent developments in the theoretical treatments of electronic and vibrational structures, and magnetic, optical, and electrical solid-state properties, providing a vital base to research. Current and potential applications of both materials, including the prospect for large-scale synthesis of graphene, biological structures, and flexible electronics, are also critically discussed. Updated discussion of properties, structure, and morphology of biological and flexible electronic applications aids fundamental knowledge discovery Innovative parallel focus on nanotubes and graphene enables you to learn from the successes and failures of, respectively, mature and emergent partner research disciplines High-quality figures and tables on physical and mathematical applications expertly summarize key information – essential if you need quick, critically relevant data
Download or read book Industrial Applications of Carbon Nanotubes written by Huisheng Peng and published by William Andrew. This book was released on 2016-10-08 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Applications of Carbon Nanotubes covers the current applications of carbon nanotubes in various industry sectors, from the military to visual display products, and energy harvesting and storage. It also assesses the opportunities and challenges for increased commercialization and manufacturing of carbon nanotubes in the years ahead. Real-life case studies illustrate how carbon nanotubes are used in each industry sector covered, providing a valuable resource for scientists and engineers who are involved and/or interested in carbon nanotubes in both academia and industry. The book serves as a comprehensive guide to the varied uses of carbon nanotubes for specialists in many related fields, including chemistry, physics, biology, and textiles. Explains how carbon nanotubes can be used to improve the efficiency and performance of industrial products Includes real-life case studies to illustrate how carbon nanotubes have been successfully employed Explores how carbon nanotubes could be mass-manufactured in the future, and outlines the challenges that need to be overcome
Download or read book Engineered Carbon Nanotubes and Nanofibrous Material written by A. K. Haghi and published by CRC Press. This book was released on 2018-10-16 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon nanotubes, with their extraordinary engineering properties, have garnered much attention in the past 10 years. Because of the broad range of potential applications, the scientific community is more motivated than ever to move beyond basic properties and explore the real issues associated with carbon nanotube-based applications. Presenting up-to-date literature that presents the current state of the science, this book, Engineered Carbon Nanotubes and Nanofibrous Material: Integrating Theory and Technique, fully explores the development phase of carbon nanotube-based applications. It looks at carbon nanotubes and their applications in diverse areas of science and engineering and considers environmental engineering applications as well. This volume is a valuable resource for engineers, scientists, researchers, and professionals in a wide range of disciplines whose focus remains on the power and promise of carbon nanotubes.
Download or read book Handbook of Carbon Nanotubes written by Jiji Abraham and published by Springer Nature. This book was released on 2022-11-16 with total page 2099 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook covers the fundamentals of carbon nanotubes (CNT), their composites with different polymeric materials (both natural and synthetic) and their potential advanced applications. Three different parts dedicated to each of these aspects are provided, with chapters written by worldwide experts in the field. It provides in-depth information about this material serving as a reference book for a broad range of scientists, industrial practitioners, graduate and undergraduate students, and other professionals in the fields of polymer science and engineering, materials science, surface science, bioengineering and chemical engineering. Part 1 comprises 22 chapters covering early stages of the development of CNT, synthesis techniques, growth mechanism, the physics and chemistry of CNT, various innovative characterization techniques, the need of functionalization and different types of functionalization methods as well as the different properties of CNT. A full chapter is devoted to theory and simulation aspects. Moreover, it pursues a significant amount of work on life cycle analysis of CNT and toxicity aspects. Part 2 covers CNT-based polymer nanocomposites in approximately 23 chapters. It starts with a short introduction about polymer nanocomposites with special emphasis on CNT-based polymer nanocomposites, different manufacturing techniques as well as critical issues concerning CNT-based polymer nanocomposites. The text deeply reviews various classes of polymers like thermoset, elastomer, latex, amorphous thermoplastic, crystalline thermoplastic and polymer fibers used to prepare CNT based polymer composites. It provides detailed awareness about the characterization of polymer composites. The morphological, rheological, mechanical, viscoelastic, thermal, electrical, electromagnetic shielding properties are discussed in detail. A chapter dedicated to the simulation and multiscale modelling of polymer nanocomposites is an additional attraction of this part of the Handbook. Part 3 covers various potential applications of CNT in approximately 27 chapters. It focuses on individual applications of CNT including mechanical applications, energy conversion and storage applications, fuel cells and water splitting, solar cells and photovoltaics, sensing applications, nanofluidics, nanoelectronics and microelectronic devices, nano-optics, nanophotonics and nano-optoelectronics, non-linear optical applications, piezo electric applications, agriculture applications, biomedical applications, thermal materials, environmental remediation applications, anti-microbial and antibacterial properties and other miscellaneous applications and multi-functional applications of CNT based polymer nanocomposites. One chapter is fully focussed on carbon nanotube research developments: published papers and patents. Risks associated with carbon nanotubes and competitive analysis of carbon nanotubes with other carbon allotropes are also addressed in this Handbook.
Download or read book Carbon Nanotubes and Their Applications written by Qing Zhang and published by CRC Press. This book was released on 2012-04-23 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book overviews the current status of research and development activities of CNTs in nanodevices, nanomaterials, or nanofabrication. This book presents 15 state-of-the-art review articles that cover CNT synthesis technologies for growing highly orientated CNTs, chirality-pure CNTs and CNTs at a large throughput and low cost, CNT assembly techniques, CNT sorting and separation processes, CNT functionalization engineering for more functionalities, CNT fundamental properties and their practical/potential electrical, electronic, optical, mechanical, chemical and biological applications.
Download or read book Focus on Nanomaterials Research written by B. M. Caruta and published by Nova Publishers. This book was released on 2006 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology is a 'catch-all' description of activities at the level of atoms and molecules that have applications in the real world. A nanometre is a billionth of a meter, about 1/80,000 of the diameter of a human hair, or 10 times the diameter of a hydrogen atom. Nanotechnology is now used in precision engineering, new materials development as well as in electronics; electromechanical systems as well as mainstream biomedical applications in areas such as gene therapy, drug delivery and novel drug discovery techniques. This book presents the latest research in this frontier field.
Download or read book Annual Review of Nano Research written by C. Jeffrey Brinker and published by World Scientific. This book was released on 2006 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first volume in an exciting new series, Annual Review of Nano Research, this formidable collection of review articles sees renowned contributors from eight different countries tackle the most recent advances in nanofabrication, nanomaterials and nanostructures. The broad coverage of topics in nanotechnology and nanoscience also includes a special focus on the hot topic of biomedical applications of nanomaterials. The important names contributing to the volume include: M R Bockstaller (USA), L Duclaux (France), S Forster (Germany), W Fritzsche (Germany), L Jiang (China), C Lopez (Spain), W J Parak (Germany), B Samori (Italy), U S Schubert (The Netherlands), S Shinkai (Japan), A Stein (USA), S M Hou (China), and Y N Xia (USA). The volume serves both as a handy reference for experts active in the field and as an excellent introduction to scientists whose expertise lies elsewhere but who are interested in learning about this cutting-edge research area. Sample Chapter(s). Chapter 1: Recent Progress in Syntheses and Applications of Inverse Opals and Related Macroporous Materials Prepared by Colloidal Crystal Templating (4,773 KB). Contents: Recent Progress in Syntheses and Applications of Inverse Opals and Related Macroporous Materials Prepared by Colloidal Crystal Templating (J C Lytle & A Stein); Photonic Crystals: Fundamentals and Applications (u Blanco & C Lpez); Nanoparticle-Micelle: A New Building Block for Facile Self-Assembly and Integration of 2-, 3-Dimensional Functional Nanostructures (H Fan & C J Brinker); Electrospinning Nanofibers with Controlled Structures and Complex Architectures (D Li et al.); Structure of Doped Single Wall Carbon Nanotubes (L Duclaux et al.); Electron Transport in Molecular Electronic Devices (S Hou et al.); Structure, Properties, and Opportunities of Block Copolymer/Particle Nanocomposites (L Bombalski et al.); Electro-Oxidation and Local Probe Oxidation of Nano-Patterned Organic Monolayers (D Wouters & U S Schubert); Recent Development of Organogels Towards Smart and Soft Materials (N Fujita et al.); Biosensors Based on Gold Nanoparticle Labeling (R MAller & W Fritzsche); Quantum Dot Applications in Biotechnology: Progress and Challenges (C-A J Lin et al.); DNA-Based Artificial Nanostructures (G Zuccheri et al.); Recent Progress on Bio-Inspired Surface with Special Wettability (S Wang et al.). Readership: Research scientists and engineers in academia, research institutes and industry, as well as graduate students and upper level undergraduate students in the physical sciences and engineering."
Download or read book Doping of Carbon Nanotubes written by Sergey Bulyarskiy and published by Springer. This book was released on 2017-07-01 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the control of electronic properties of carbon nanotubes. It presents thermodynamic calculations of the formation of impurities and defects in the interaction of nanotubes with hydrogen, oxygen, nitrogen and boron, based on theoretical models of the formation of defects in carbon nanotubes. It is shown that doping and adsorption lead to changes in the electronic structure of the tubes as well as to the appearance of impurity states in the HOMO-LUMO gap. The book presents examples of specific calculations for doping of carbon nanotubes with oxygen, hydrogen, nitrogen and boron, together with numerous experimental results and a comparison with the author’s thermodynamic calculations. Possible directions of the technological processes of optimization are pointed out, as well as the perspectives of p-n-transition creation with the help of carbon nanotube arrays. The results presented were derived from the physics of the processes and a theoretical model of the technological processes. Though a wealth of empirical information on doping nanotubes has been accumulated in the scientific literature, what is lacking is a theoretical model for their analysis. As such, the book develops a thermodynamic model of the self-organization of structural elements in multicomponent systems – including carbon nanotubes, clusters and precipitates in condensed matter – and subsequently adapts it to the doping of carbon nanotubes. This approach allows readers to gain a far deeper understanding of the processes of doping carbon nanotubes.
Download or read book Physics of Carbon Nanotube Devices written by Francois Leonard and published by William Andrew. This book was released on 2008-11-18 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Possibly the most impactful material in the nanotechnology arena, carbon nanotubes have spurred a tremendous amount of scientific research and development. Their superior mechanical and chemical robustness makes them easily manipulable and allows for the assembly of various types of devices, including electronic, electromechanical, opto-electronic and sensing devices.In the field of nanotube devices, however, concepts that describe the properties of conventional devices do not apply. Carbon nanotube devices behave much differently from those using traditional materials, and offer entirely new functionality. This book – designed for researchers, engineers and graduate students alike – bridges the experimental and theoretical aspects of carbon nanotube devices. It emphasizes and explains the underlying physics that govern their working principles, including applications in electronics, nanoelectromechanical systems, field emission, optoelectronics and sensing. Other topics include: electrical contacts, p-n junctions, transistors, ballistic transport, field emission, oscillators, rotational actuators, electron-phonon scattering, photoconductivity, and light emission. Many of the aspects discussed here differ significantly from those learned in books or traditional materials, and are essential for the future development of carbon nanotube technology.• Bridges experimental and theoretical aspects of carbon nanotube devices, focusing on the underlying physics that govern their working principles • Explains applications in electronics, nanoelectromechanical systems, field emission, optoelectronics and sensing. • Other topics include: electrical contacts, p-n junctions, transistors, ballistic transport, field emission, oscillators, rotational actuators, electron-phonon scattering, photoconductivity, and light emission. • Covers aspects that significantly differ from those learned in traditional materials, yet are essential for future advancement of carbon nanotube technology. * Bridges experimental and theoretical aspects of carbon nanotube devices, focusing on the underlying physics that govern their working principles * Explains applications in electronics, nanoelectromechanical systems, field emission, optoelectronics and sensing.* Other topics include: electrical contacts, p-n junctions, transistors, ballistic transport, field emission, oscillators, rotational actuators, electron-phonon scattering, photoconductivity, and light emission* Covers aspects that significantly differ from those learned in traditional materials, yet are essential for future advancement of carbon nanotube technology.
Download or read book In Situ Transmission Electron Microscopy Studies of Carbon Nanotube Nucleation Mechanism and Carbon Nanotube Clamped Metal Atomic Chains written by Dai-Ming Tang and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using an in situ transmission electron microscopy (TEM) approach to investigate the growth mechanism of carbon nanotubes (CNTs) as well as the fabrication and properties of CNT-clamped metal atomic chains (MACs) is the focus of the research summarized in this thesis. The application of an in situ TEM approach in the above-mentioned research provides not only real-time observation but also monitored machining and structural evolvement at the atomic level. In this thesis, the author introduces a CNT tubular nano furnace that can be operated under TEM for investigation of the CNT nucleation mechanism. By studying the nucleation process of CNTs in the presence of various catalysts, including iron-based metallic catalysts and silicon oxide-based non-metallic catalysts, the physical states of the catalysts as well as the nucleation and growth process of CNTs are revealed. Based on the understanding of the nucleation mechanism, the author proposes a hetero-epitaxial growth strategy of CNTs from boron nitride, which provides a new route for the controllable growth of CNTs. In addition, the author presents an electron beam-assisted nanomachining technique and the fabrication of a CNT-clamped MAC prototype device based on this technique. The formation process of CNT-clamped Fe atomic chains (ACs) can be monitored with atomic resolution. The demonstrated quantized conductance and uninfluenced half-metallic properties of Fe ACs indicate that CNTs can be promising nanoscale electrodes or interconnectors for the linking and assembly of nano and subnano structures.
Download or read book Nanotube Superfiber Materials written by Mark Schulz and published by William Andrew. This book was released on 2019-03-29 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotube Superfiber Materials: Science, Manufacturing, Commercialization, Second Edition, helps engineers and entrepreneurs understand the science behind the unique properties of nanotube fiber materials, how to efficiency and safely produce them, and how to transition them into commercial products. Each chapter gives an account of the basic science, manufacturing, properties and commercial potential of a specific nanotube material form and its application. New discoveries and technologies are explained, along with experiences in handing-off the improved materials to industry. This book spans nano-science, nano-manufacturing, and the commercialization of nanotube superfiber materials. As such, it opens up the vast commercial potential of nanotube superfiber materials. Applications for nanotube superfiber materials cut across most of the fields of engineering, including spacecraft, automobiles, drones, hyperloop tracks, water and air filters, infrastructure, wind energy, composites, and medicine where nanotube materials enable development of tiny machines that can work inside our bodies to diagnose and treat disease. Provides up to date information on the applications of nanotube fiber materials Explores both the manufacturing and commercialization of nanotube superfibers Sets out the processes for producing macro-scale materials from carbon nanotubes Describes the unique properties of these materials
Download or read book Carbon Nanotubes and Related Structures written by Peter John Frederich Harris and published by Cambridge University Press. This book was released on 2001-10-18 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a 1999 book on carbon nanotubes, one of the most exciting areas in materials chemistry.