Download or read book Introduction to Particle Technology written by Martin J. Rhodes and published by John Wiley & Sons. This book was released on 2013-03-25 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle technology is a term used to refer to the science and technology related to the handling and processing of particles and powders. The production of particulate materials, with controlled properties tailored to subsequent processing and applications, is of major interest to a wide range of industries, including chemical and process, food, pharmaceuticals, minerals and metals companies and the handling of particles in gas and liquid solutions is a key technological step in chemical engineering. This textbook provides an excellent introduction to particle technology with worked examples and exercises. Based on feedback from students and practitioners worldwide, it has been newly edited and contains new chapters on slurry transport, colloids and fine particles, size enlargement and the health effects of fine powders. Topics covered include: Characterization (Size Analysis) Processing (Granulation, Fluidization) Particle Formation (Granulation, Size Reduction) Storage and Transport (Hopper Design, Pneumatic Conveying, Standpipes, Slurry Flow) Separation (Filtration, Settling, Cyclones) Safety (Fire and Explosion Hazards, Health Hazards) Engineering the Properties of Particulate Systems (Colloids, Respirable Drugs, Slurry Rheology) This book is essential reading for undergraduate students of chemical engineering on particle technology courses. It is also valuable supplementary reading for students in other branches of engineering, applied chemistry, physics, pharmaceutics, mineral processing and metallurgy. Practitioners in industries in which powders are handled and processed may find it a useful starting point for gaining an understanding of the behavior of particles and powders. Review of the First Edition taken from High Temperatures - High pressures 1999 31 243 – 251 "..This is a modern textbook that presents clear-cut knowledge. It can be successfully used both for teaching particle technology at universities and for individual study of engineering problems in powder processing."

Download or read book Fluid Particle Technology written by American Institute of Chemical Engineers and published by . This book was released on 1966 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Particle Technology and Applications written by Sunggyu Lee and published by CRC Press. This book was released on 2016-04-19 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle Technology and Applications presents the theoretical and technological background of particle science and explores up-to-date applications of particle technologies in the chemical, petrochemical, energy, mechanical, and materials industries. It looks at the importance of particle science and technology in the development of efficient chemi

Download or read book Fundamentals of Particle Technology written by Richard Holdich and published by MidlandIT. This book was released on 2020-12-01 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Particle Technology is designed to assist the understanding of how particulate materials behave during processing and is written with engineers and scientists, who are new to the subject, in mind. It is accessible, in both cost and style, and is illustrated with numerous line diagrams. Most of the 16 chapters end with questions in multiple choice format. This helps problem decomposition and the reader can see each step required to arrive at an overall process solution. If the reader makes a mistake with any of the steps he, or she, usually does not see their answer and will immediately know where they have gone wrong. The aspects of Particle Technology covered include: particle characterisation, solid/liquid and solid/gas separations, fluidisation, flow of (and in) dispersions, powder mixing, storage, hazards, crushing and colloidal interaction. Extensive Internet support and referencing is provided. The teaching style adopted is the result of experience gained from presenting the subject for over 30 years at both undergraduate and postgraduate level.

Download or read book Fluid Particle Technology written by and published by . This book was released on 1966 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fluid Particle Technology written by Bernard S. Lee and published by . This book was released on 1966 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Particle Technology written by Hans Rumpf and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: The inspiration for translating this classic text came during a sabbatical year spent at the University of Karlsruhe in 1974. Under the leadership of the late Professor Hans Rumpf, the Institut fUr Mechanische Verfahrenstechnik, Karlsruhe, from the early 1960s onwards, by extensive research and advanced teaching had promoted the discipline of mechanical process technology, a branch of process engineering which had been rather neglected, especially in many chemical engineering depart ments of universities in the English-speaking world. There is a need for texts of this kind, particularly for the more specialized teaching that has to be done during the later stages of engineering courses. This work, which is really a monograph, serves as a concise and compact introduction, albeit at an advanced level, to all those functions of process engineering that have to do with the handling and treatment of particulate matter and bulk solids. Much of this information has previously been scattered around journals and other books and not brought together in one work. Furthermore, Rumpf has emphasized the physical and theoretical foundations of the subject and avoided a treatment that is simply empirical.

Download or read book Particle Technology and Engineering written by Jonathan P.K. Seville and published by Butterworth-Heinemann. This book was released on 2016-05-20 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle Technology and Engineering presents the basic knowledge and fundamental concepts that are needed by engineers dealing with particles and powders. The book provides a comprehensive reference and introduction to the topic, ranging from single particle characterization to bulk powder properties, from particle-particle interaction to particle-fluid interaction, from fundamental mechanics to advanced computational mechanics for particle and powder systems. The content focuses on fundamental concepts, mechanistic analysis and computational approaches. The first six chapters present basic information on properties of single particles and powder systems and their characterisation (covering the fundamental characteristics of bulk solids (powders) and building an understanding of density, surface area, porosity, and flow), as well as particle-fluid interactions, gas-solid and liquid-solid systems, with applications in fluidization and pneumatic conveying. The last four chapters have an emphasis on the mechanics of particle and powder systems, including the mechanical behaviour of powder systems during storage and flow, contact mechanics of particles, discrete element methods for modelling particle systems, and finite element methods for analysing powder systems. This thorough guide is beneficial to undergraduates in chemical and other types of engineering, to chemical and process engineers in industry, and early stage researchers. It also provides a reference to experienced researchers on mathematical and mechanistic analysis of particulate systems, and on advanced computational methods. - Provides a simple introduction to core topics in particle technology: characterisation of particles and powders: interaction between particles, gases and liquids; and some useful examples of gas-solid and liquid-solid systems - Introduces the principles and applications of two useful computational approaches: discrete element modelling and finite element modelling - Enables engineers to build their knowledge and skills and to enhance their mechanistic understanding of particulate systems

Download or read book Fluid and Particle Mechanics written by S. J. Michell and published by Elsevier. This book was released on 2013-09-24 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid and Particle Mechanics provides information pertinent to hydraulics or fluid mechanics. This book discusses the properties and behavior of liquids and gases in motion and at rest. Organized into nine chapters, this book begins with an overview of the science of fluid mechanics that is subdivided accordingly into two main branches, namely, fluid statics and fluid dynamics. This text then examines the flowmeter devices used for the measurement of flow of liquids and gases. Other chapters consider the principle of resistance in open channel flow, which is based on improper application of the Torricellian law of efflux. This book discusses as well the use of centrifugal pumps for exchanging energy between a mechanical system and a liquid. The final chapter deals with the theory of settling, which finds an extensive application in several industrially important processes. This book is a valuable resource for chemical engineers, students, and researchers.

Download or read book Fluid Particle Technology written by Alan Wesley Weimer and published by . This book was released on 1994 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fluid Particle Technology written by Bernard S. Lee and published by . This book was released on 1966 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Particle Technology written by Martin J. Rhodes and published by John Wiley & Sons. This book was released on 2024-05-16 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: INTRODUCTION TO PARTICLE TECHNOLOGY A new edition of the indispensable guide to particulates and powders Particle technology concerns the formation, processing and properties of the particles and powders which make up many of the products that surround us. Such products range from the cement and aggregate in the built environment to pharmaceuticals and processed foods. Most of the process industries involve particles, either as essential components such as catalysts or as intermediate or final products, and minerals such as the rare earths that are generally mined and processed in particulate form. Particles can have many beneficial uses but they can also cause harm in the environment and, through inhalation, to the individual. In all cases, the powder properties, particularly particle size, are crucially important. This well-known textbook, now in its 3rd edition, provides an easily-understood introduction to the underlying scientific principles of particle technology, together with examples of how these principles can be used in practical design and operation of industrial processes. Each chapter contains both worked examples and exercises for the student. Based on feedback from students and users of the earlier editions, this revised and expanded text includes introductory chapters on particles as products and on computational methods. The topics have been selected to give coverage of the broad areas of particle technology and include: Characterization (size analysis, surface area) Processing (granulation, fluidization) Particle formation (granulation, crystallisation, tableting, size reduction) Storage and transport (hopper design, pneumatic conveying, standpipes) Separation (filtration, settling, cyclones) Safety (fire and explosion hazards, health hazards) Engineering the properties of particulate systems to achieve desired product performance Discrete element modelling of particulate systems Introduction to Particle Technology, 3rd Edition is essential reading for students of chemical engineering. The text is also recommended reading for students of mechanical engineering, applied chemistry, pharmaceutics, physics, mineral processing, and metallurgy, and is an excellent source for practising engineers and scientists looking to establish a working knowledge of the subject.

Download or read book Introduction to Particle Technology written by Martin J. Rhodes and published by . This book was released on 1998-12-30 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Particle Technology Martin Rhodes Monash University, Australia Particle technology is of increasing importance to a wide range of industries, including food, pharmaceuticals, chemicals, minerals and metals. In these industries, companies with in-house knowledge of particle technology have a competitive advantage in product development, quality control and waste minimization. This accessible book forms a comprehensive introduction to the many concepts of this broad subject. Key topics covered include:- * Characterisation (size analysis) * Processing (fluidized beds, granulation) * Particle formation (granulation, size reduction) * Fluid-Particle separation (filtration, settling, gas cyclones) * Safety (dust explosions) * Transport (pneumatic transport and standpipes) Worked examples of calculations and exercises (with answers) are provided in each chapter and real-life industrial applications illustrating the techniques and theory are included. This book is essential reading for students of chemical engineering on particle technology courses. It is also valuable supplementary reading for students of civil engineering, applied chemistry, physics, pharmaceutics, metallurgy and materials engineering.

Download or read book Fluid Particle Technology Bernard S Lee Editor Papers By H Besford and Others written by Bernard S ed Lee and published by . This book was released on with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Instrumentation for Fluid Particle Flow written by S.L. Soo and published by Univ. Press of Mississippi. This book was released on 2013-01-15 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: A focus on methods of measurement and options for engineers and scientists performing research and evaluation of particle-fluid flow systems. Improved instrumentation for measurement in this field is an essential element in the progress of research and engineering of multi-phase flow systems. Some of the most original and productive research specialists in the field of particle-fluid flow systems are assembled in this book, which is an important and current reference volume.--[Source inconnue].

Download or read book Handbook of Fluidization and Fluid Particle Systems written by Wen-Ching Yang and published by CRC Press. This book was released on 2003-03-19 with total page 873 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference details particle characterization, dynamics, manufacturing, handling, and processing for the employment of multiphase reactors, as well as procedures in reactor scale-up and design for applications in the chemical, mineral, petroleum, power, cement and pharmaceuticals industries. The authors discuss flow through fixed beds, elutriation and entrainment, gas distributor and plenum design in fluidized beds, effect of internal tubes and baffles, general approaches to reactor design, applications for gasifiers and combustors, dilute phase pneumatic conveying, and applications for chemical production and processing. This is a valuable guide for chemists and engineers to use in their day-to-day work.

Download or read book Processing of Particulate Solids written by J.P. Seville and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over half of the products of the chemical and process industries are sold in a particulate form. The range of such products is vast: from agrochemicals to pigments, from detergents to foods, from plastics to pharmaceuticals. However, surveys of the performance of processes designed to produce particulate products have consistently shown inadequate design and poor reliability. `Particle technology' is a new subject facing new challenges. Chemical and process engineering is becoming less concerned with the design of plants to produce generic simple chemicals (which are often single phase fluids) and is now more concerned with speciality `effect' chemicals which may often be in particulate form. Chemical and process engineers are also being recruited in increasing numbers into areas outside their tranditional fields, such as the food industry, pharmaceuticals and the manufacture of a wide variety of consumer products. This book has been written to meet their needs. It provides comprehensive coverage of the technology of particulate solids, in a form which is both accessible and concise enough to be useful to engineering and science students in the final year of an undergraduate degree, and at Master's level. Although it was written with students of chemical engineering in mind, it will also be of use and interest to students of other disciplines. It comprises an account of the fundamentals of teh subject, illustrated by worked examples, and followed by a wide range of selected applications.