Download or read book Fluid Flow in Discontinuous Rocks written by C.h. Lee and published by Springer. This book was released on 1993-07-31 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study develops simple, usable fracture flow models based on an understanding of discontinuity structures and the mechanics of rock and discontinuity deformation, incorporating these into models derived from percolation theory.
Download or read book Rock Fractures and Fluid Flow written by National Research Council and published by National Academies Press. This book was released on 1996-08-27 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific understanding of fluid flow in rock fracturesâ€"a process underlying contemporary earth science problems from the search for petroleum to the controversy over nuclear waste storageâ€"has grown significantly in the past 20 years. This volume presents a comprehensive report on the state of the field, with an interdisciplinary viewpoint, case studies of fracture sites, illustrations, conclusions, and research recommendations. The book addresses these questions: How can fractures that are significant hydraulic conductors be identified, located, and characterized? How do flow and transport occur in fracture systems? How can changes in fracture systems be predicted and controlled? Among other topics, the committee provides a geomechanical understanding of fracture formation, reviews methods for detecting subsurface fractures, and looks at the use of hydraulic and tracer tests to investigate fluid flow. The volume examines the state of conceptual and mathematical modeling, and it provides a useful framework for understanding the complexity of fracture changes that occur during fluid pumping and other engineering practices. With a practical and multidisciplinary outlook, this volume will be welcomed by geologists, petroleum geologists, geoengineers, geophysicists, hydrologists, researchers, educators and students in these fields, and public officials involved in geological projects.
Download or read book Rock Fractures and Fluid Flow written by Committee on Fracture Characterization and Fluid Flow and published by National Academies Press. This book was released on 1996-09-10 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific understanding of fluid flow in rock fractures--a process underlying contemporary earth science problems from the search for petroleum to the controversy over nuclear waste storage--has grown significantly in the past 20 years. This volume presents a comprehensive report on the state of the field, with an interdisciplinary viewpoint, case studies of fracture sites, illustrations, conclusions, and research recommendations. The book addresses these questions: How can fractures that are significant hydraulic conductors be identified, located, and characterized? How do flow and transport occur in fracture systems? How can changes in fracture systems be predicted and controlled? Among other topics, the committee provides a geomechanical understanding of fracture formation, reviews methods for detecting subsurface fractures, and looks at the use of hydraulic and tracer tests to investigate fluid flow. The volume examines the state of conceptual and mathematical modeling, and it provides a useful framework for understanding the complexity of fracture changes that occur during fluid pumping and other engineering practices. With a practical and multidisciplinary outlook, this volume will be welcomed by geologists, petroleum geologists, geoengineers, geophysicists, hydrologists, researchers, educators and students in these fields, and public officials involved in geological projects.
Download or read book Fluid Flow in Fractured Rocks written by Robert W. Zimmerman and published by John Wiley & Sons. This book was released on 2023-12-19 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: FLUID FLOW IN FRACTURED ROCKS "The definitive treatise on the subject for many years to come" (Prof. Ruben Juanes, MIT) Authoritative textbook that provides a comprehensive and up-to-date introduction to fluid flow in fractured rocks Fluid Flow in Fractured Rocks provides an authoritative introduction to the topic of fluid flow through single rock fractures and fractured rock masses. This book is intended for readers with interests in hydrogeology, hydrology, water resources, structural geology, reservoir engineering, underground waste disposal, or other fields that involve the flow of fluids through fractured rock masses. Classical and established models and data are presented and carefully explained, and recent computational methodologies and results are also covered. Each chapter includes numerous graphs, schematic diagrams and field photographs, an extensive reference list, and a set of problems, thus providing a comprehensive learning experience that is both mathematically rigorous and accessible. Written by two internationally recognized leaders in the field, Fluid Flow in Fractured Rocks includes information on: Nucleation and growth of fractures in rock, with a multiscale characterization of their geometric traits Effect of normal and shear stresses on the transmissivity of a rock fracture and mathematics of fluid flow through a single rock fracture Solute transport in rocks, with quantitative descriptions of advection, molecular diffusion, and dispersion Fluid Flow in Fractured Rocks is an essential resource for researchers and postgraduate students who are interested in the field of fluid flow through fractured rocks. The text is also highly suitable for professionals working in civil, environmental, and petroleum engineering.
Download or read book Geologic Fracture Mechanics written by Richard A. Schultz and published by Cambridge University Press. This book was released on 2019-08-08 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to geologic fracture mechanics covering geologic structural discontinuities from theoretical and field-based perspectives.
Download or read book Discontinuous Deformation Analysis in Rock Mechanics Practice written by Yossef H. Hatzor and published by CRC Press. This book was released on 2017-07-20 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: The numerical, discrete element, Discontinuous Deformation Analysis (DDA) method was developed by Dr. Gen-hua Shi while he was working at the University of California, Berkeley, under the supervision of Prof. Richard E. Goodman in the late 1980s. Two-dimensional DDA was published in 1993 and three-dimensional DDA in 2001. Since its publication DDA has been verified, validated and applied in numerous studies worldwide and is now considered a powerful and robust method to address both static and dynamic engineering problems in discontinuous rock masses. In this book Yossef H. Hatzor and Guowei Ma, co-chairs of the International Society for Rock Mechanics (ISRM) Commission on DDA, join Dr. Shi in authoring a monograph that presents the state of the art in DDA research. A comprehensive discussion of DDA development since its publication is provided in Chapter 1, followed by concise reviews of 2D and 3D DDA in chapters 2 and 3. Procedures to select geological and numerical input parameters for DDA are discussed in Chapter 4, and DDA validation and verification is presented in Chapter 5. Applications of DDA in underground and rock slope engineering projects are discussed in chapters 6 and 7. In Chapter 8 the novel contact theory recently developed by Dr. Shi is published in its complete form, for the first time. This book is published within the framework of the ISRM Book Series and is the contribution of the ISRM DDA Commission to the international rock mechanics community.
Download or read book Numerical Modelling and Analysis of Fluid Flow and Deformation of Fractured Rock Masses written by Xing Zhang and published by Elsevier. This book was released on 2002-05-14 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our understanding of the subsurface system of the earth is becoming increasingly more sophisticated both at the level of the behaviour of its components (solid, liquid and gas) as well as their variations in space and time. The implementation of coupled models is essential for the understanding of an increasing number of natural phenomena and in predicting human impact on these. The growing interest in the relation between fluid flow and deformation in subsurface rock systems that characterise the upper crust has led to increasingly specialized knowledge in many branches of earth sciences and engineering. A multidisciplinary subject dealing with deformation and fluid flow in the subsurface system is emerging. While research in the subject area of faulting, fracturing and fluid flow has led to significant progress in many different areas, the approach has tended to be "reductionist", i.e. involving the isolation and simplification of phenomena so that they may be treated as single physical processes. The reality is that many processes operate together within subsurface systems, and this is particularly true for fluid flow and deformation of fractured rock masses. The aim of this book is to begin to explore how advances in numerical modelling can be applied to understanding the complex phenomena observed in such systems. Although mainly based on original research, the book also includes the fundamental principles and practical methods of numerical modelling, in particular distinct element methods. This volume explores the principles of numerical modelling and the methodologies for some of the most important problems, in addition to providing practical models with detailed discussions on various topics.
Download or read book Water Circulation in Rocks written by Laura Scesi and published by Springer Science & Business Media. This book was released on 2009-10-06 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding water circulation in rocks represents a very important element to solving many of the problems linked with civil, environmental and mining engineering. This book offers a synthesis of the actual knowledge about the fluid flow in rocks: - from the medium characterization and the structural geological survey to the generation of stereonets; - the evaluation of the hydrogeological parameters using either deterministic or probabilistic methodologies; - the evaluation of the preferential flow direction considering the change of the hydrogeological structures; - the methods and models used to simulate the flows. Three case studies are provided; water circulation and slope instability, hydrogeological risk linked with tunnelling, and hydrogeological risk linked with road construction.
Download or read book Transport Processes in Porous Media written by Jacob Bear and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 807 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the invited lectures presented during the NATO/ASI conducted in Pullman, Washington, July 9-18, 1989. This is the third in a series of NATO/ASIs on transport phenomena in porous media. The first two, which took place at Newark, Delaware in 1982 and 1985, are devoted to various topics related to the Fundamentals of Transport Processes in Porous Media. The contents of the books resulting from previous NATO/ASIs are given at the end of this book. Transport of extensive quantities such as mass of a fluid phase, mass of chemical species carried by a fluid phase, energy and electric charge in porous media, as encountered in a large variety of engineering disciplines, is an emerging interdisciplinary field. The groundwater flow, the simultaneous flow of gas, oil and water in petroleum reservoirs, the movement and accumulation of pollutants in the saturated and unsaturated subsurface zones, thermal energy storage in reservoirs, land subsidence in response to charges in overburden loads, or to pumping of fluids from underground formations, wave propagation in seismic investigations or as produced by earthquakes, chemical reactors, water flow through sand filters and the movement of fluids through kidneys, may serve as examples of fields in which the theory of transport in porous media is employed.
Download or read book Discontinuous Deformation Analysis in Rock Mechanics Practice written by Yossef H. Hatzor and published by CRC Press. This book was released on 2017-07-20 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: The numerical, discrete element, Discontinuous Deformation Analysis (DDA) method was developed by Dr. Gen-hua Shi while he was working at the University of California, Berkeley, under the supervision of Prof. Richard E. Goodman in the late 1980s. Two-dimensional DDA was published in 1993 and three-dimensional DDA in 2001. Since its publication DDA has been verified, validated and applied in numerous studies worldwide and is now considered a powerful and robust method to address both static and dynamic engineering problems in discontinuous rock masses. In this book Yossef H. Hatzor and Guowei Ma, co-chairs of the International Society for Rock Mechanics (ISRM) Commission on DDA, join Dr. Shi in authoring a monograph that presents the state of the art in DDA research. A comprehensive discussion of DDA development since its publication is provided in Chapter 1, followed by concise reviews of 2D and 3D DDA in chapters 2 and 3. Procedures to select geological and numerical input parameters for DDA are discussed in Chapter 4, and DDA validation and verification is presented in Chapter 5. Applications of DDA in underground and rock slope engineering projects are discussed in chapters 6 and 7. In Chapter 8 the novel contact theory recently developed by Dr. Shi is published in its complete form, for the first time. This book is published within the framework of the ISRM Book Series and is the contribution of the ISRM DDA Commission to the international rock mechanics community.
Download or read book Theory of Fluid Flows Through Natural Rocks written by G.I. Barenblatt and published by Springer. This book was released on 2010-12-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics, the oldest branch of physics, to this day remains the basis for modern technology. This is especially evident with regard to the oil and gas industry. Almost all of the technological processes in these branches of industry, from the drilling of wells to the transporting of oil and gas products via pipelines, are mechanical in their nature. The processes of the development of oil and gas deposits are of primary importance in the whole technological chain of oil and gas extraction from the rocks and their transportation to the customer. The use of scientific methods for improving technology is a long-established tradition of oil and gas industry. For the Western reader, it is enough to mention the fundamental treatises by the outstanding American research scientist and engineer M. Muskat (1937, 1949) as well as the excellent books of Scheidegger (1960) and Collins (1961) which combine practical goals with profound theoretical analysis. The initiators of the application of mechanics for solving problems of the oil and gas industry in the U.S.S.R. were V.G. Shukhov (1981) and LS. Leibenzon (1934, 1947, 1953, 1955) whose works constitute admirable examples of Soviet technical thought. During recent times, the magnitude of oil and gas extraction has increased immensely and many reservoirs with complicated physical and geological properties have, therefore, entered into the development. The fundamental problem of enhancing oil and gas recovery from rocks has been intensively and deeply analyzed.
Download or read book Discontinuity Analysis for Rock Engineering written by S.D. Priest and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers wishing to build structures on or in rock use the discipline known as rock mechanics. This discipline emerged as a subject in its own right about thirty five years ago, and has developed rapidly ever since. However, rock mechanics is still based to a large extent on analytical techniques that were originally formulated for the mechanical design of structures made from man made materials. The single most important distinction between man-made materials and the natural material rock is that rock contains fractures, of many kinds on many scales; and because the fractures - of whatever kin- represent breaks in the mechanical continuum, they are collectively termed 'discontinuities' . An understanding of the mechanical influence of these discontinuities is essential to all rock engineers. Most of the world is made of rock, and most of the rock near the surface is fractured. The fractures dominate the rock mass geometry, deformation modulus, strength, failure behaviour, permeability, and even the local magnitudes and directions of the in situ stress field. Clearly, an understanding of the presence and mechanics of the discontinuities, both singly and in the rock mass context, is therefore of paramount importance to civil, mining and petroleum engineers. Bearing this in mind, it is surprising that until now there has been no book dedicated specifically to the subject of discontinuity analysis in rock engineering.
Download or read book Groundwater Updates written by K. Sato and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Groundwater is essential to life and to maintaining Earth's water cycle. In the face of growing threats to this invaluable resource, recent advances in research and analysis - notably in numerical simulation and data processing with computers - are bringing rapid changes in dynamic methodology for groundwater management and modeling. This book contains the latest updates from the field of groundwater science and engineering, organized around five major topics: Optimization of groundwater resources in basins, Groundwater pollution and remediation technologies, Underground development and groundwater technologies, Interaction between surface and subsurface water, and Reliability of numerical methods and scaling in geohydraulics. This collection of more than 80 papers by leading specialists provides a valuable source of information for researchers, engineers, and students in the field of groundwater resources and management.
Download or read book Fluid Flow and Transport in Rocks written by B. Jamtveit and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents the proceedings of the 9th written by a very active group of physicists at Kongsberg seminar, held at the Norwegian Mining the University of Oslo - physicists interested in Museum located in the city of Kongsberg about complex systems in general and geo-like systems 70 km Southwest of Oslo. The Kongsberg district in particular. is known for numerous Permian vein deposits of The content of the book is organized into three native silver, and mining activity in the area lasted major parts following the introductory chapter. for more than 300 years, finally ceasing in 1957. Chapters 2 to 7 primarily treat the role of fluids The previous eight Kongsberg seminars were in specific geological environments, ranging from focused on ore-forming processes and all of these sedimentary basins (Chapters 2-3) to contact were organized by Professor Arne Bj0rlykke, now metamorphic/hydrothermal scenarios (Chapters director of the Norwegian Geological Survey. 4-5) and regional metamorphic settings (Chapters Since process-orientated research tends to break 6-7). The following four chapters (8-11) focus down the traditional barriers between the different on various properties of fluid-rock systems that geological disciplines, this seminar has always are critical in controlling flow and transport been a meeting point for people with a variety through rocks. These include: mineral solubility of geological backgrounds.
Download or read book Geomechanics and Geodynamics of Rock Masses written by Vladimir Litvinenko and published by CRC Press. This book was released on 2018-05-24 with total page 865 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geomechanics and Geodynamics of Rock Masses – Selected Papers contains selected contributions from EUROCK 2018, the 2018 International Symposium of the International Society for Rock Mechanics (ISRM 2018, Saint Petersburg, Russia, 22—26 May 2018). Dedicated to recent advances and achievements in the fields of geomechanics and geotechnology, the book will be of interest to researchers and professionals involved in the various branches of rock mechanics and rock engineering. EUROCK 2018, organized by the Saint Petersburg Mining University, is a continuation of the successful series of ISRM symposia in Europe, which began in 1992 in Chester, UK.
Download or read book Rock Mechanics Meeting Society s Challenges and Demands Two Volume Set written by Erik Eberhardt and published by CRC Press. This book was released on 2007-05-17 with total page 1772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ore extraction through surface and underground mining continues to involve deeper excavations in more complex rock mass conditions. Communities and infrastructure are increasingly exposed to rock slope hazards as they expand further into rugged mountainous terrains. Energy needs are accelerating the development of new hydroelectric dams and exploit
Download or read book Geomechanics and Geodynamics of Rock Masses Volume 2 written by Vladimir Litvinenko and published by CRC Press. This book was released on 2018-05-20 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is Volume 2 of the EUROCK 2018 proceedings. Geomechanics and Geodynamics of Rock Masses contains contributions presented at EUROCK 2018, the 2018 International Symposium of the International Society for Rock Mechanics (ISRM 2018, Saint Petersburg, Russia, 22-26 May 2018). Dedicated to recent advances and achievements in the fields of geomechanics and geotechnology, the main topics of the book include: - Physical and mechanical properties of fractured rock (laboratory testing and rock properties, field measurements and site investigations) - Geophysics in rock mechanics - Rock mass strength and failure - Nonlinear problems in rock mechanics - Effect of joint water on the behavior of rock foundation - Numerical modeling and back analysis - Mineral resources development: methods and rock mechanics problems - Rock mechanics and underground construction in mining, hydropower industry and civil engineering - Rock mechanics in petroleum engineering - Geodynamics and monitoring of rock mass behavior - Risks and hazards - Geomechanics of technogenic deposits Geomechanics and Geodynamics of Rock Masses will be of interest to researchers and professionals involved in the various branches of rock mechanics and rock engineering. EUROCK 2018, organized by the Saint Petersburg Mining University, is a continuation of the successful series of ISRM symposia in Europe, which began in 1992 in Chester, UK.
