Download or read book Flows and Chemical Reactions in Homogeneous Mixtures written by Roger Prud'homme and published by John Wiley & Sons. This book was released on 2013-10-08 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flows with chemical reactions can occur in various fields such as combustion, process engineering, aeronautics, the atmospheric environment and aquatics. The examples of application chosen in this book mainly concern homogeneous reactive mixtures that can occur in propellers within the fields of process engineering and combustion: – propagation of sound and monodimensional flows in nozzles, which may include disequilibria of the internal modes of the energy of molecules; – ideal chemical reactors, stabilization of their steady operation points in the homogeneous case of a perfect mixture and classical instruments of experimental and theoretical analysis such as population balances, and the distribution of residence and passage times; – laminar and turbulent flames, separating those which are premixed from those which are not and which do not exhibit the same mechanisms, but which also occur in the case of triple flames. Flows and Chemical Reactions in Homogeneous Mixtures provides information on dimensional analysis, statistical thermodynamics with coupling between internal modes and chemical reactions, the apparition and damping of fluid turbulence as well as its statistical processing, bifurcations, flames in a confined medium and diffusion. Contents 1. Flows in Nozzles. 2. Chemical Reactors. 3. Laminar and Turbulent Flames. Appendix 1. Dimensionless Numbers, Similarity. Appendix 2. Thermodynamic Functions. Appendix 3. Concepts of Turbulence. Appendix 4. Thermodynamic functions for a mixture in disequilibrium. Appendix 5. Notion of bifurcation. Appendix 6. Confined flame. Appendix 7. Limits of Validity of the First-order Expansions for Diffusion Flames.
Download or read book Flows and Chemical Reactions in Heterogeneous Mixtures written by Roger Prud'homme and published by John Wiley & Sons. This book was released on 2014-10-30 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book - a sequel of previous publications 'Flows and Chemical Reactions' and 'Chemical Reactions in Flows and Homogeneous Mixtures' - is devoted to flows with chemical reactions in heterogeneous environments. Heterogeneous media in this volume include interfaces and lines. They may be the site of radiation. Each type of flow is the subject of a chapter in this volume. We consider first, in Chapter 1, the question of the generation of environments biphasic individuals: dusty gas, mist, bubble flow. Chapter 2 is devoted to the study at the mesoscopic scale: particle-fluid exchange of momentum and heat with determination of the respective exchange coefficients. In Chapter 3, we establish simplified equations of macroscopic balance for mass, for the momentum and energy, in the case of particles of one size (monodisperse suspension). Radiative phenomena are presented in Chapter 5.
Download or read book Flows and Chemical Reactions in Heterogeneous Mixtures written by Roger Prud'homme and published by John Wiley & Sons. This book was released on 2014-12-03 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book - a sequel of previous publications 'Flows and Chemical Reactions' and 'Chemical Reactions in Flows and Homogeneous Mixtures' - is devoted to flows with chemical reactions in heterogeneous environments. Heterogeneous media in this volume include interfaces and lines. They may be the site of radiation. Each type of flow is the subject of a chapter in this volume. We consider first, in Chapter 1, the question of the generation of environments biphasic individuals: dusty gas, mist, bubble flow. Chapter 2 is devoted to the study at the mesoscopic scale: particle-fluid exchange of momentum and heat with determination of the respective exchange coefficients. In Chapter 3, we establish simplified equations of macroscopic balance for mass, for the momentum and energy, in the case of particles of one size (monodisperse suspension). Radiative phenomena are presented in Chapter 5.
Download or read book Flows and Chemical Reactions in an Electromagnetic Field written by Roger Prud'homme and published by John Wiley & Sons. This book was released on 2014-10-30 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book - a sequel of previous publications Flows and Chemical Reactions, Chemical Reactions Flows in Homogeneous Mixtures and Chemical Reactions and Flows in Heterogeneous Mixtures - is devoted to flows with chemical reactions in the electromagnetic field. The first part, entitled basic equations, consists of four chapters. The first chapter provides an overview of the equations of electromagnetism in Minkowski spacetime. This presentation is extended to balance equations, first in homogeneous media unpolarized in the second chapter and homogeneous fluid medium polarized in the third chapter. Chapter four is devoted to heterogeneous media in the presence of electromagnetic field. Balance equations at interfaces therein. The second part of this volume is entitled applications. It also includes four chapters. Chapter five provides a study of the action of fields on fire. Chapter six deals with a typical application for the Peltier effect, chapter seven is devoted to metal-plasma interaction, especially in the Langmuir probe and finally Chapter Eight deals with the propulsion Hall effect. Are given in appendix supplements the laws of balance with electromagnetic field and described the methodology for establishing one-dimensional equations for flow comprising active walls as is the case in some Hall effect thrusters.
Download or read book Fast Chemical Reactions in Turbulent Flows written by Rustam Ya Deberdeev and published by Smithers Rapra. This book was released on 2013-09-02 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamentals of fast liquid-phase chemical reactions and the principles of their scientific foundation, technical implementation and industrial application of new technologies. In addition, the equipment required to perform these reactions, in a turbulent mode in the chemical, petrochemical and petroleum industries, is also discussed. The macrokinetic approach has been developed with consideration of the diffusion, hydrodynamics, and heat transfer processes. Due to the advancement of fundamental knowledge, equations of practical engineering importance have been obtained for the calculations of mass and heat transfer processes carried out in conditions of high turbulence, and developed for the implementation in fast chemical reactions involving the synthesis of low molecular weight products and polymers. New methods for controlling the molecular characteristics of polymers have been developed based on the tailored regulation of the hydrodynamics of the reactive mixture flow. Typical processes have been used as model examples to reveal the influence of turbulence on the behaviour of fast chemical reactions used for the synthesis of low molecular weight products, in single-phase and two-phase reactive systems. Brand new tubular devices have been developed with the following characteristics: compact size, high productivity, and a quasi-perfect mixing operation mode in turbulent flows. These devices are subdivided into cylindrical, shell-and-tube, 'zone', and diffuser-confusor designs. Original solutions are proposed for the instrumental implementation of fast liquid-phase processes and development of continuous energy- and resource-efficient technologies for the synthesis of some large-scale compounds.
Download or read book Chemically Reacting Flow written by Robert J. Kee and published by John Wiley & Sons. This book was released on 2017-09-27 with total page 1013 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to the theoretical underpinnings and practical applications of chemically reacting flow Chemically Reacting Flow: Theory, Modeling, and Simulation, Second Edition combines fundamental concepts in fluid mechanics and physical chemistry while helping students and professionals to develop the analytical and simulation skills needed to solve real-world engineering problems. The authors clearly explain the theoretical and computational building blocks enabling readers to extend the approaches described to related or entirely new applications. New to this Second Edition are substantially revised and reorganized coverage of topics treated in the first edition. New material in the book includes two important areas of active research: reactive porous-media flows and electrochemical kinetics. These topics create bridges between traditional fluid-flow simulation approaches and transport within porous-media electrochemical systems. The first half of the book is devoted to multicomponent fluid-mechanical fundamentals. In the second half the authors provide the necessary fundamental background needed to couple reaction chemistry into complex reacting-flow models. Coverage of such topics is presented in self-contained chapters, allowing a great deal of flexibility in course curriculum design. • Features new chapters on reactive porous-media flow, electrochemistry, chemical thermodynamics, transport properties, and solving differential equations in MATLAB • Provides the theoretical underpinnings and practical applications of chemically reacting flow • Emphasizes fundamentals, allowing the analyst to understand fundamental theory underlying reacting-flow simulations • Helps readers to acquire greater facility in the derivation and solution of conservation equations in new or unusual circumstances • Reorganized to facilitate use as a class text and now including a solutions manual for academic adopters Computer simulation of reactive systems is highly efficient and cost-effective in the development, enhancement, and optimization of chemical processes. Chemically Reacting Flow: Theory, Modeling, and Simulation, Second Edition helps prepare graduate students in mechanical or chemical engineering, as well as research professionals in those fields take utmost advantage of that powerful capability.
Download or read book Flows and Chemical Reactions written by Roger Prud'homme and published by John Wiley & Sons. This book was released on 2013-01-09 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to relate fluid flows to chemical reactions. It focuses on the establishment of consistent systems of equations with their boundary conditions and interfaces, which allow us to model and deal with complex situations. Chapter 1 is devoted to simple fluids, i.e. to a single chemical constituent. The basic principles of incompressible and compressible fluid mechanics, are presented in the most concise and educational manner possible, for perfect or dissipative fluids. Chapter 2 relates to the flows of fluid mixtures in the presence of chemical reactions. Chapter 3 is concerned with interfaces and lines. Interfaces have been the subject of numerous publications and books for nearly half a century. Lines and curvilinear media are less known Several appendices on mathematical notation, thermodynamics and mechanics methods are grouped together in Chapter 4. This summary presentation of the basic equations of simple fluids, with exercises and their solutions, as well as those of chemically reacting flows, and interfaces and lines will be very useful for graduate students, engineers, teachers and scientific researchers in many domains of science and industry who wish to investigate problems of reactive flows. Portions of the text may be used in courses or seminars on fluid mechanics.
Download or read book Dimensional Analysis and Similarity in Fluid Mechanics written by Nord-Eddine Sad Chemloul and published by John Wiley & Sons. This book was released on 2020-11-02 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dimensional analysis is the basis for the determination of laws that allow the experimental results obtained on a model to be transposed to the fluid system at full scale (a prototype). The similarity in fluid mechanics then allows for better redefinition of the analysis by removing dimensionless elements. This book deals with these two tools, with a focus on the Rayleigh method and the Vaschy-Buckingham method. It deals with the homogeneity of the equations and the conversion between the systems of units SI and CGS, and presents the dimensional analysis approach, before addressing the similarity of flows. Dimensional Analysis and Similarity in Fluid Mechanics proposes a scale model and presents numerous exercises combining these two methods. It is accessible to students from their first year of a bachelors degree.
Download or read book Fluid Mechanics at Interfaces 2 written by Roger Prudhomme and published by John Wiley & Sons. This book was released on 2022-04-12 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interfaces are present in most fluid mechanics problems. They not only denote phase separations and boundary conditions, but also thin flames and discontinuity waves. Fluid Mechanics at Interfaces 2 examines cases that involve one-dimensional or bi-dimensional manifolds, not only in gaseous and liquid physical states but also in subcritical fluids and in single- and multi-phase systems that may be pure or mixed. Chapter 1 addresses certain aspects of turbulence in discrete mechanics, briefly describing the physical model associated with discrete primal and dual geometric topologies before focusing on channel flow simulations at turbulence-inducing Reynolds numbers. Chapter 2 centers on atomization in an accelerating domain. In one case, an initial Kelvin–Helmholtz instability generates an acceleration field, in turn creating a Rayleigh–Taylor instability which ultimately determines the size of the droplets formed. Chapter 3 explores numerical studies of pipes with sudden contraction using OpenFOAM, and focuses on modeling that will be useful for engines and automobiles. Chapters 4 and 5 study the evaporation of droplets that are subject to high-frequency perturbations, a possible cause of instabilities in injection engines. The Heidmann model, which replaces the droplets in motion in a combustion chamber with a single continuously-fed droplet, is made more complex by considering the finite conduction heat transfer phenomenon. Finally, Chapter 6 is devoted to a study of the rotor blade surface of a Savonius wind turbine, considering both a non-stationary and a three-dimensional flow.
Download or read book Fluid Mechanics at Interfaces 1 written by Roger Prudhomme and published by John Wiley & Sons. This book was released on 2022-03-04 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interfaces are present in most fluid mechanics problems. They not only denote phase separations and boundary conditions, but also thin flames and discontinuity waves. Fluid Mechanics at Interfaces 1 focuses on the science of interfaces, in particular, using various scientific methods of analysis relating to space, speed and time. Our investigation takes us from the microscopic or small scale (starting with molecular and nanoscopic scales) to the macroscopic (including meso and interstellar scales), and also explores the laws of interfaces (classical mechanics, quantum mechanics and relativistic mechanics). Chapter 1 examines the questions raised by modeling interfaces in the presence of one or more fluid phases. Chapter 2 discusses the action of turbulence in liquid–vapor flows that contain both small, dispersed bubbles as well as large bubbles, with heat exchanges at the interfaces. In addition, a new model is presented, using large eddy simulation (LES). Chapter 3 studies an original method for calculating the drag force and thermal transfers in flows around networks of spherical particles, while Chapter 4 focuses on the relationships between interfaces and critical fluids. Chapter 5 examines shearing, which causes anomalies in the Brownian motion of particles in strongly fluctuating near-critical mixtures, and Chapter 6 introduces basic concepts related to combustion interfaces, raising the question of the combustion of solids, before ending with a brief presentation of the Rankine–Hugoniot theory and a historical overview of the research carried out in the field of combustion.
Download or read book Wall Turbulence Control written by Sedat Tardu and published by John Wiley & Sons. This book was released on 2017-02-07 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wall turbulence control is a major subject, the investigation of which involves significant industrial, environmental and fundamental consequences. Wall Turbulence Control addresses recent advances achieved in active and passive wall turbulence control over the past two decades. This valuable reference for scientists, researchers and engineers provides an updated view of the research into this topic, including passive control, optimal and suboptimal control methodology, linear control and control using adaptive methods (neural networks), polymer and bubble injection, electromagnetic control and recent advances in control by plasma.
Download or read book Collective Phenomena in Plasmas and Elsewhere written by Kamel Ourabah and published by John Wiley & Sons. This book was released on 2023-10-10 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Universe is made up of systems consisting of a very large number of particles interacting in a very complex way. When studying these systems, a precise microscopic approach is unattainable. In practice, the best strategy is one that is able to “distinguish” between superfluous information and the information needed to make predictions about the evolution of the system. There are two main competing approaches: kinetic and hydrodynamic. Collective Phenomena in Plasmas and Elsewhere presents an overview of the theoretical bases of these kinetic and hydrodynamic approaches, but also discusses their limitations, the links between them and their extension to quantum mechanics and relativity. These methods were born in part out of the study of plasmas, but they also have more universal applications. A general framework for these approaches is outlined, followed by some applications in plasmas, gravitation, Bose–Einstein condensates and dark matter. Particular emphasis is placed on the analogies that can be made between all these different systems.
Download or read book Heat and Moisture Transfer between Human Body and Environment written by Jean-Paul Fohr and published by John Wiley & Sons. This book was released on 2015-11-04 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human adaptation under cold or hot temperatures has always required specific fabrics for clothing. Sports or protective garment companies propose to improve performance or safety. Behind thermal comfort lays many physical/physiological topics: human thermoregulation loop, natural or forced convection, heat and vapor transfer through porous textile layers, solar and infrared radiation effects. This book leads through progressive and pedagogic stages to discern the weight of all the concerned physical parameters.
Download or read book Discrete Mechanics written by Jean-Paul Caltagirone and published by John Wiley & Sons. This book was released on 2014-12-09 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the fundamental principles of mechanics to re-establish the equations of Discrete Mechanics. It introduces physics and thermodynamics associated to the physical modeling. The development and the complementarity of sciences lead to review today the old concepts that were the basis for the development of continuum mechanics. The differential geometry is used to review the conservation laws of mechanics. For instance, this formalism requires a different location of vector and scalar quantities in space. The equations of Discrete Mechanics form a system of equations where the Helmholtz-Hodge decomposition plays an important role.
Download or read book Reaction Kinetics for Chemical Engineers written by Stanley M. Walas and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reaction Kinetics for Chemical Engineers focuses on chemical kinetics, including homogeneous reactions, nonisothermal systems, flow reactors, heterogeneous processes, granular beds, catalysis, and scale-up methods. The publication first takes a look at fundamentals and homogeneous isothermal reactions. Topics include simple reactions at constant volume or pressure, material balance in complex reactions, homogeneous catalysis, effect of temperature, energy of activation, law of mass action, and classification of reactions. The book also elaborates on adiabatic and programmed reactions, continuous stirred reactors, and homogeneous flow reactions. Topics include nonisothermal flow reactions, semiflow processes, tubular-flow reactors, material balance in flow problems, types of flow processes, rate of heat input, constant heat-transfer coefficient, and nonisothermal conditions. The text ponders on uncatalyzed heterogeneous reactions, fluid-phase reactions catalyzed by solids, and fixed and fluidized beds of particles. The transfer processes in granular masses, fluidization, heat and mass transfer, adsorption rates and equilibria, diffusion and combined mechanisms, diffusive mass transfer, and mass-transfer coefficients in chemical reactions are discussed. The publication is a dependable source of data for chemical engineers and readers wanting to explore chemical kinetics.
Download or read book Flow and Chemical Reaction in Homogeneous and Heterogeneous Media written by and published by . This book was released on 1990 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work supported by this Contract focuses on the fundamental processes involved in spray combustion, transition to detonation, flame-acoustic interaction and vapor explosions. These processes include single-phase fluid dynamics, thermodynamics and chemical kinetics. The interactions and couplings among these processes have been of particular interest. The research effort in multiphase dynamics includes an examination of the entropy inequality to see if it can provide constraints on constitutive equations; derivation of constitutive equations for high Reynolds number flow of spherical droplets; derivation of a model for the evolution of geometric parameters during the flow; and derivation of a model for particle velocity fluctuations in a fluid.
Download or read book Single and Two Phase Flows on Chemical and Biomedical Engineering written by Ricardo Dias and published by Bentham Science Publishers. This book was released on 2012-07-30 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt: Single and two-phase flows are ubiquitous in most natural process and engineering systems. Examples of systems or process include, packed bed reactors, either single phase or multiphase, absorber and adsorber separation columns, filter beds, plate heat exchangers, flow of viscoelastic fluids in polymer systems, or the enhanced recovery of oil, among others. In each case the flow plays a central role in determining the system or process behavior and performance. A better understanding of the underlying physical phenomena and the ability to describe the phenomena properly are both crucial to improving design, operation and control processes involving the flow of fluids, ensuring that they will be more efficient and cost effective. Expanding disciplines such as microfluidics and the simulation of complex flow physical systems, such as blood flow in physiological networks, also rely heavily on accurate predictions of fluid flow. Recent advances either in computational and experimental techniques are improving the existing knowledge of single and multiphase flows in engineering and physical systems of interest. This ebook is a review on the state-of-the-art and recent advances in critical areas of fluid mechanics and transport phenomena with respect to chemical and biomedical engineering applications.
