EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Flow Rate Decline of Steam Wells in Fractured Geothermal Reservoirs

Download or read book Flow Rate Decline of Steam Wells in Fractured Geothermal Reservoirs written by Lawrence Berkeley Laboratory and published by . This book was released on 1985 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Flow Rate Decline of Steam Wells in Fractured Geothermal Reservoirs

Download or read book Flow Rate Decline of Steam Wells in Fractured Geothermal Reservoirs written by Lawrence Berkeley Laboratory and published by . This book was released on 1985 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Decline curves are commonly used at The Geysers geothermal field to assess the generating capacity of a producing lease. It is generally assumed that wells will initially be drilled using 40-acre (400 m) spacing, with infill drilling used later to provide additional producing wells as needed. It is commonly believed that the final well spacing should not be less than 10 acres (200 m). Decline curves are used with this approach to estimate the number of make-up wells during a project lifetime (up to 30 years), as well as the appropriate plant size (MWe). A rather simple two-dimensional model was used to investigate the factors that control flow rate decline in steam wells. The effects of parameters such as fracture spacing and permeability are considered, as well as the effects of permeability, porosity and initial liquid saturation in the rock matrix. Also, the conventional P/z method that is commonly used in analyzing gas well production is investigated in terms of its applicability to fractured vapor dominated systems.

Book Energy Research Abstracts

Download or read book Energy Research Abstracts written by and published by . This book was released on 1994 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Fractures in Geothermal Reservoirs

Download or read book Fractures in Geothermal Reservoirs written by Geothermal Resources Council and published by . This book was released on 1982 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Workshop Report

Download or read book Workshop Report written by and published by . This book was released on 1998 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Injection and Energy Recovery in Fractured Geothermal Reservoirs

Download or read book Injection and Energy Recovery in Fractured Geothermal Reservoirs written by Lawrence Berkeley Laboratory and published by . This book was released on 1983 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book ERDA Energy Research Abstracts

Download or read book ERDA Energy Research Abstracts written by United States. Energy Research and Development Administration and published by . This book was released on 1977 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Proceedings of the 17th New Zealand Geothermal Workshop 1995

Download or read book Proceedings of the 17th New Zealand Geothermal Workshop 1995 written by M. P. Hochstein and published by . This book was released on 1995 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book The CRC Handbook of Mechanical Engineering  Second Edition

Download or read book The CRC Handbook of Mechanical Engineering Second Edition written by and published by CRC Press. This book was released on 1998-03-24 with total page 2642 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the past 20 years, the field of mechanical engineering has undergone enormous changes. These changes have been driven by many factors, including: the development of computer technology worldwide competition in industry improvements in the flow of information satellite communication real time monitoring increased energy efficiency robotics automatic control increased sensitivity to environmental impacts of human activities advances in design and manufacturing methods These developments have put more stress on mechanical engineering education, making it increasingly difficult to cover all the topics that a professional engineer will need in his or her career. As a result of these developments, there has been a growing need for a handbook that can serve the professional community by providing relevant background and current information in the field of mechanical engineering. The CRC Handbook of Mechanical Engineering serves the needs of the professional engineer as a resource of information into the next century.

Book Geothermal Energy Update

Download or read book Geothermal Energy Update written by and published by . This book was released on 1976 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Geothermal Energy

Download or read book Geothermal Energy written by United States. Dept. of Energy. Division of Geothermal Energy and published by . This book was released on 1981 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Energy  Waste and the Environment

Download or read book Energy Waste and the Environment written by R. Gieré and published by Geological Society of London. This book was released on 2004 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides incentives for further development of sustainable fuel cycles through a novel and interdisciplinary approach to an Earth science-related topic. The main focus is on geochemical concepts in immobilizing, isolating or neutralizing waste derived from energy production and consumption. The book also addresses the issue of using some types of energy-derived waste as alternative raw materials. Moreover, it highlights research on how certain wastes can be used for energy production, an increasingly important aspect of modern integrated waste management strategies. The main objectives are to: (a) identify the most serious environmental problems related to various types of power generation and associated waste accumulation; (b) present strategies, based on natural analogue materials, for the immobilization of toxic and radioactive waste components through mineralogical barriers; (c) discuss modern procedures for reuse of waste or certain waste components; and (d) review the importance of geochemical modelling in describing and predicting the interaction between waste and the environment.

Book Red Sea Geothermal Provinces

Download or read book Red Sea Geothermal Provinces written by D. Chandrasekharam and published by CRC Press. This book was released on 2016-06-22 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Today, over two billion people in developing countries live without any electricity. They lead lives of misery, walking miles every day for water and firewood, just to survive. What if there was an existing, viable technology, that when developed to its highest potential could increase everyone’s standard of living, cut fossil fuel demand and the resultant pollution” said Peter Meisen, President, Global Energy Network Institute in 1997. Even though energy is available, technology was not matured enough to tap this energy in the nineties. Now, with the advancement of drilling technology, extracting heat from hot rocks has become a reality. Very soon when CO2 replaces the circulation fluid to extract heat from granites then both fossil fuel based and renewable energy sources will coexists balancing the CO2 emissions and providing energy, food and water security to the rich and the poor countries. Red Sea rift represents the youngest spreading ridges in the world with a vast amount of heat energy stored on either side. The Red Sea is surrounded by countries with a weak economy. Developing a geothermal energy based economy in countries like Eritrea, Djibouti and Ethiopia will provide food and water security to these countries while for other countries, geothermal energy will help in mitigating greenhouse gas emissions. Although geothermal energy sources are available in all the countries since the opening of the Red Sea, millions of years ago, this was not brought to the light. Oil importing countries became highly dependent on the oil rich countries to sustain their economy and growth and thus remained poor. This book unfolds the huge energy source, hydrothermal and EGS, for the benefit of the poor countries to reduce poverty and lift the socio economic status of these countries. The book deals with i) future energy demand, ii) CO2 emissions associated with fossil fuel based power plants, iii) black carbon emissions associated biomass energy source and iv) strategies to reduce CO2 emissions by using geothermal energy as energy source mix in all the countries—oil exporting and oil importing countries— around the Red Sea. The amount of energy available from hot granites in all the countries is well documented. EGS being the future energy source for mankind, this book will form the basis for future research by young scientists and academicians. Availability of fresh water is a matter of concern for all countries. The only way to satisfy the thirst of a growing population, to meet drinking water demand and food security, is to depend on seawater. A large volume of CO2 is being emitted from desalination plants supported by fossil fuel based energy sources. This book describes the advantages of using geothermal energy sources for the desalination process to meet the growing water and food demand of the countries around the Red Sea. Oil rich countries, using its geothermal resources, can now reduce food imports and become self sufficient in food production. This book gives hope for millions of children living in the underdeveloped countries around the Red Sea to satisfy their hunger and live a decent life with a continuous source of electricity, water and food available. This book ends with a note on the economic benefits of geothermal energy vs other renewables. With the signing of the GGA (Global Geothermal Alliance) by several countries during the December 2015 CoP 21 summit in Paris, policy makers and administrators will work together in implementing the necessary infrastructure and support to develop this clean energy source.

Book Injection and Energy Recovery in Fractured Geothermal Reservoirs

Download or read book Injection and Energy Recovery in Fractured Geothermal Reservoirs written by Lawrence Berkeley Laboratory and published by . This book was released on 1983 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical studies of the effects of injection on the behavior of production wells completed in fractured two-phase geothermal reservoirs are presented. In these studies the multiple-interacting-continua (MINC) method is employed for the modeling of idealized fractured reservoirs. Simulations are carried out for a five-spot well pattern with various well spacings, fracture spacings, and injection fractions. The production rates from the wells are calculated using a deliverability model. The results of the studies show that injection into two-phase fractured reservoirs increases flow rates and decreases enthalpies of producing wells. These two effects offset each other so that injection tends to have small effects on the usable energy output of production wells in the short term. However, if a sufficiently large fraction of the produced fluids is injected, the fracture system may become liquid-filled and an increased steam rate is obtained. Our studies show that injection greatly increases the long-term energy output from wells, as it helps extract heat from the resrvoir rocks. If a high fraction of the produced fluids is injected, the ultimate energy recovery will increase manyfold.

Book ERDA Energy Research Abstracts

Download or read book ERDA Energy Research Abstracts written by United States. Energy Research and Development Administration. Technical Information Center and published by . This book was released on 1977 with total page 1682 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Geothermal Reservoir Engineering

Download or read book Geothermal Reservoir Engineering written by Malcomm Grant and published by Elsevier. This book was released on 2013-02-07 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geothermal Reservoir Engineering offers a comprehensive account of geothermal reservoir engineering and a guide to the state-of-the-art technology, with emphasis on practicality. Topics covered include well completion and warm-up, flow testing, and field monitoring and management. A case study of a geothermal well in New Zealand is also presented. Comprised of 10 chapters, this book opens with an overview of geothermal reservoirs and the development of geothermal reservoir engineering as a discipline. The following chapters focus on conceptual models of geothermal fields; simple models that illustrate some of the processes taking place in geothermal reservoirs under exploitation; measurements in a well from spudding-in up to first discharge; and flow measurement. The next chapter provides a case history of one well in the Broadlands Geothermal Field in New Zealand, with particular reference to its drilling, measurement, discharge, and data analysis/interpretation. The changes that have occurred in exploited geothermal fields are also reviewed. The final chapter considers three major problems of geothermal reservoir engineering: rapid entry of external cooler water, or return of reinjected water, in fractured reservoirs; the effects of exploitation on natural discharges; and subsidence. This monograph serves as both a text for students and a manual for working professionals in the field of geothermal reservoir engineering. It will also be of interest to engineers and scientists of other disciplines.

Book The CRC Handbook of Mechanical Engineering

Download or read book The CRC Handbook of Mechanical Engineering written by D. Yogi Goswami and published by CRC Press. This book was released on 2004-09-29 with total page 2690 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this standard-setting handbook provides and all-encompassing reference for the practicing engineer in industry, government, and academia, with relevant background and up-to-date information on the most important topics of modern mechanical engineering. These topics include modern manufacturing and design, robotics, computer engineering, environmental engineering, economics, patent law, and communication/information systems. The final chapter and appendix provide information regarding physical properties and mathematical and computational methods. New topics include nanotechnology, MEMS, electronic packaging, global climate change, electric and hybrid vehicles, and bioengineering.