Download or read book Fluidization of Fine Powders written by José Manuel Valverde Millán and published by Springer Science & Business Media. This book was released on 2012-10-12 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the rich phenomenology exhibited by fine powders when they are fluidized by a gas flow. Fine powder cohesiveness leads to poor flowability, clumping, difficulty in fluidizing, irregular avalanching behavior, etc. Despite all the inconveniences, fine powder processes pervade the chemical, pharmaceutical, agricultural and mining industries among others. The author in this book analyzes the mechanism by which interparticle adhesive forces are reduced by means of surface additives. Different techniques have been developed in the last years to assist fluidization by helping the gas flow to mobilize and break cohesive aggregates, which help to homogenize fluidization. As reviewed in this book, the use of these techniques may have a relevant impact on novel processes based on fluidized beds of fine powder and with relevant applications on leading edge technologies such as Atomic Layer Deposition on nanoparticles and CO2 capture by gas-fluidized beds of adsorbent powders. The study of fluidized beds has a marked interdisciplinary character. This book is thus intended for academic and industrial researchers in applied physics, mechanical, chemical, and environmental engineering, who are interested in the special characteristics of fine powders.
Download or read book Powders and Bulk Solids written by Dietmar Schulze and published by Springer Nature. This book was released on 2021-09-02 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book concentrates on powder flow properties, their measurement and applications. These topics are explained starting from the interactions between individual particles up to the design of silos. A wide range of problems are discussed – such as flow obstructions, segregation, and vibrations. The goal is to provide a deeper understanding of the powder flow, and to show practical solutions.
Download or read book Powder Flow written by Ali Hassanpour and published by Royal Society of Chemistry. This book was released on 2019-07-12 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder flow has attracted increased attention in recent years as novel formulated and functional products are being developed in powder forms, particularly in pharmaceutical and high value additive manufacturing industries. This book meets a need for a truly integrated modern treatment of dry powder flow, covering theory, robust characterisation techniques, modelling tools and applications. Written by leaders in the field, the book opens by introducing the wide range of powder processing problems faced by industry, the complexities of powders and the myriad of ways their flow behaviour can be characterised. The authors then move on, with contributions from experts, to describe fundamental properties that can be measured, defining the states of stress and shear rate and the considerations that need to be taken account. By providing a comprehensive treatment of all available characterisation techniques, as well as various modelling tools, the reader obtains a clear, practical overview. Case studies and applications connect theory to practical examples across a broad range of industries. This book stands out by not only providing the reader with guidance on what to measure but also how to interpret results, ensuring this is an invaluable text for anyone working on powder flow in the chemical, pharmaceutical and manufacturing industries, as well as students and researchers across chemical and process engineering disciplines.
Download or read book Proceedings of the 20th International Conference on Fluidized Bed Combustion written by Guangxi Yue and published by Springer Science & Business Media. This book was released on 2010-07-28 with total page 1186 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the 20th International Conference on Fluidized Bed Combustion (FBC) collect 9 plenary lectures and 175 peer-reviewed technical papers presented in the conference held in Xi'an China in May 18-21,2009. The conference was the 20th conference in a series, covering the latest fundamental research results, as well as the application experience from pilot plants, demonstrations and industrial units regarding to the FBC science and technology. It was co-hosted by Tsinghua University, Southeast University, Zhejiang University, China Electricity Council and Chinese Machinery Industry Federation. A particular feature of the proceedings is the balance between the papers submitted by experts from industry and the papers submitted by academic researchers, aiming to bring academic knowledge to application as well as to define new areas for research. The authors of the proceedings are the most active researchers, technology developers, experienced and representative facility operators and manufacturers. They presented the latest research results, state-of-the-art development and projects, and the useful experience. The proceedings are divided into following sections: • CFB Boiler Technology, Operation and Design • Fundamental Research on Fluidization and Fluidized Combustion • C02 Capture and Chemical Looping • Gasification • Modeling and Simulation on FBC Technology • Environments and Pollutant Control • Sustainable Fuels The proceedings can be served as idea references for researchers, engineers, academia and graduate students, plant operators, boiler manufacturers, component suppliers, and technical managers who work on FBC fundamental research, technology development and industrial application.
Download or read book Handbook of Powder Science Technology written by Muhammed Fayed and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 913 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the first edition of Canada, and Australia have increased teach Handbook of Powder Science and Technology, ing, research, and training activities in areas the field of powder science and technology has related to particle science and technology. gained broader recognition and its various ar In addition, it is worth mentioning the many eas of interest have become more defined and books and monographs that have been pub focused. Research and application activities lished on specific areas of particle, powder, related to particle technology have increased and particle fluid by professional publishers, globally in academia, industry, and research technical societies and university presses. Also, institutions. During the last decade, many to date, there are many career development groups, with various scientific, technical, and courses given by specialists and universities on engineering backgrounds have been founded various facets of powder science and technol to study, apply, and promote interest in areas ogy.
Download or read book Essential Chemistry for Formulators of Semisolid and Liquid Dosages written by Vitthal S. Kulkarni and published by Academic Press. This book was released on 2015-10-15 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: A needed resource for pharmaceutical scientists and cosmetic chemists, Essential Chemistry for Formulators of Semisolid and Liquid Dosages provides insight into the basic chemistry of mixing different phases and test methods for the stability study of nonsolid formulations. The book covers foundational surface/colloid chemistry, which forms the necessary background for making emulsions, suspensions, solutions, and nano drug delivery systems, and the chemistry of mixing, which is critical for further formulation of drug delivery systems into semisolid (gels, creams, lotions, and ointments) or liquid final dosages. Expanding on these foundational principles, this useful guide explores stability testing methods, such as particle size, rheological/viscosity, microscopy, and chemical, and closes with a valuable discussion of regulatory issues. Essential Chemistry for Formulators of Semisolid and Liquid Dosages offers scientists and students the foundation and practical guidance to make and analyze semisolid and liquid formulations. - Unique coverage of the underlying chemistry that makes possible stable dosages - Quality content written by experienced experts from the drug development industry - Valuable information for academic and industrial scientists developing topical and liquid dosage formulations for pharmaceutical as well as skin care and cosmetic products
Download or read book Introduction to Particle Technology written by Martin J. Rhodes and published by John Wiley & Sons. This book was released on 2013-03-25 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle technology is a term used to refer to the science and technology related to the handling and processing of particles and powders. The production of particulate materials, with controlled properties tailored to subsequent processing and applications, is of major interest to a wide range of industries, including chemical and process, food, pharmaceuticals, minerals and metals companies and the handling of particles in gas and liquid solutions is a key technological step in chemical engineering. This textbook provides an excellent introduction to particle technology with worked examples and exercises. Based on feedback from students and practitioners worldwide, it has been newly edited and contains new chapters on slurry transport, colloids and fine particles, size enlargement and the health effects of fine powders. Topics covered include: Characterization (Size Analysis) Processing (Granulation, Fluidization) Particle Formation (Granulation, Size Reduction) Storage and Transport (Hopper Design, Pneumatic Conveying, Standpipes, Slurry Flow) Separation (Filtration, Settling, Cyclones) Safety (Fire and Explosion Hazards, Health Hazards) Engineering the Properties of Particulate Systems (Colloids, Respirable Drugs, Slurry Rheology) This book is essential reading for undergraduate students of chemical engineering on particle technology courses. It is also valuable supplementary reading for students in other branches of engineering, applied chemistry, physics, pharmaceutics, mineral processing and metallurgy. Practitioners in industries in which powders are handled and processed may find it a useful starting point for gaining an understanding of the behavior of particles and powders. Review of the First Edition taken from High Temperatures - High pressures 1999 31 243 – 251 "..This is a modern textbook that presents clear-cut knowledge. It can be successfully used both for teaching particle technology at universities and for individual study of engineering problems in powder processing."
Download or read book Predictive Modeling of Pharmaceutical Unit Operations written by Preetanshu Pandey and published by Woodhead Publishing. This book was released on 2016-09-26 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of modeling and simulation tools is rapidly gaining prominence in the pharmaceutical industry covering a wide range of applications. This book focuses on modeling and simulation tools as they pertain to drug product manufacturing processes, although similar principles and tools may apply to many other areas. Modeling tools can improve fundamental process understanding and provide valuable insights into the manufacturing processes, which can result in significant process improvements and cost savings. With FDA mandating the use of Quality by Design (QbD) principles during manufacturing, reliable modeling techniques can help to alleviate the costs associated with such efforts, and be used to create in silico formulation and process design space. This book is geared toward detailing modeling techniques that are utilized for the various unit operations during drug product manufacturing. By way of examples that include case studies, various modeling principles are explained for the nonexpert end users. A discussion on the role of modeling in quality risk management for manufacturing and application of modeling for continuous manufacturing and biologics is also included. - Explains the commonly used modeling and simulation tools - Details the modeling of various unit operations commonly utilized in solid dosage drug product manufacturing - Practical examples of the application of modeling tools through case studies - Discussion of modeling techniques used for a risk-based approach to regulatory filings - Explores the usage of modeling in upcoming areas such as continuous manufacturing and biologics manufacturingBullet points
Download or read book Handbook of Pharmaceutical Wet Granulation written by Ajit S. Narang and published by Academic Press. This book was released on 2018-08-31 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Pharmaceutical Wet Granulation: Theory and Practice in a Quality by Design Paradigm offers a single and comprehensive reference dedicated to all aspects of pharmaceutical wet granulation, taking a holistic approach by combining introductory principles with practical solutions. Chapters are written by international experts across industry, academic and regulatory settings, and cover a wide spectrum of relevant and contemporary wet granulation topics, techniques and processes. The books' focus on process analytical technology, quality by design principles, granulation equipment, modeling, scale-up, control and real time release makes it a timely and valuable resource for all those involved in pharmaceutical wet granulation. - Discusses fundamentals of theory and current industrial practice in the field of wet granulation, including product and process design and role of material properties in wet granulation - Examines the modern evolution of wet granulation through current topics such as established and novel process analytical technologies (PATs), and product development and scale-up paradigms - Written for scientists working within the pharmaceutical industry, as well as academics, regulatory officials and equipment vendors who provide PAT tools and granulation equipment
Download or read book Characterisation of Bulk Solids written by Don McGlinchey and published by John Wiley & Sons. This book was released on 2009-02-12 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handling of powders and bulk solids is a critical industrial technology across a broad spectrum of industries, from minerals processing to bulk and fine chemicals, and the food and pharmaceutical industries, yet is rarely found in the curricula of engineering or chemistry departments. With contributions from leading authors in their respective fields, Characterisation of Bulk Solids provides the reader with a sound understanding of the techniques, importance and application of particulate materials characterisation. It covers the fundamental characteristics of individual particles and bulk particulate materials, and includes discussion of a wide range of measurement techniques, and the use of material characteristics in design and industrial practice. The reader will then be in a better position to diagnose solids handling and processing problems in industry, and to deal with experts and equipment suppliers from an informed standpoint. Written for post-graduate engineers, chemical scientists and technologists at all stages of their industrial career, the book will also serve as an ideal primer in any of the specialist areas to inform further study.
Download or read book Pharmaceutical Blending and Mixing written by P. J. Cullen and published by John Wiley & Sons. This book was released on 2015-07-20 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written in four parts, this book provides a dedicated and in-depth reference for blending within the pharmaceutical manufacturing industry. It links the science of blending with regulatory requirements associated with pharmaceutical manufacture. The contributors are a combination of leading academic and industrial experts, who provide an informed and industrially relevant perspective of the topic. This is an essential book for the pharmaceutical manufacturing industry, and related academic researchers in pharmaceutical science and chemical and mechanical engineering.
Download or read book Developing Solid Oral Dosage Forms written by Yihong Qiu and published by Academic Press. This book was released on 2009-03-10 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developing Solid Oral Dosage Forms is intended for pharmaceutical professionals engaged in research and development of oral dosage forms. It covers essential principles of physical pharmacy, biopharmaceutics and industrial pharmacy as well as various aspects of state-of-the-art techniques and approaches in pharmaceutical sciences and technologies along with examples and/or case studies in product development. The objective of this book is to offer updated (or current) knowledge and skills required for rational oral product design and development. The specific goals are to provide readers with: - Basics of modern theories of physical pharmacy, biopharmaceutics and industrial pharmacy and their applications throughout the entire process of research and development of oral dosage forms - Tools and approaches of preformulation investigation, formulation/process design, characterization and scale-up in pharmaceutical sciences and technologies - New developments, challenges, trends, opportunities, intellectual property issues and regulations in solid product development - The first book (ever) that provides comprehensive and in-depth coverage of what's required for developing high quality pharmaceutical products to meet international standards - It covers a broad scope of topics that encompass the entire spectrum of solid dosage form development for the global market, including the most updated science and technologies, practice, applications, regulation, intellectual property protection and new development trends with case studies in every chapter - A strong team of more than 50 well-established authors/co-authors of diverse background, knowledge, skills and experience from industry, academia and regulatory agencies
Download or read book Dosage Form Design Parameters written by and published by Academic Press. This book was released on 2018-07-25 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dosage Form Design Parameters, Volume II, examines the history and current state of the field within the pharmaceutical sciences, presenting key developments. Content includes drug development issues, the scale up of formulations, regulatory issues, intellectual property, solid state properties and polymorphism. Written by experts in the field, this volume in the Advances in Pharmaceutical Product Development and Research series deepens our understanding of dosage form design parameters. Chapters delve into a particular aspect of this fundamental field, covering principles, methodologies and the technologies employed by pharmaceutical scientists. In addition, the book contains a comprehensive examination suitable for researchers and advanced students working in pharmaceuticals, cosmetics, biotechnology and related industries. - Examines the history and recent developments in drug dosage forms for pharmaceutical sciences - Focuses on physicochemical aspects, prefomulation solid state properties and polymorphism - Contains extensive references for further discovery and learning that are appropriate for advanced undergraduates, graduate students and those interested in drug dosage design
Download or read book Formulation Tools for Pharmaceutical Development written by J E Aguilar and published by Elsevier. This book was released on 2013-09-30 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: A range of new and innovative tools used for preformulation and formulation of medicines help optimize pharmaceutical development projects. Such tools also assist with the performance evaluation of the pharmaceutical process, allowing any potential gaps to be identified. These tools can be applied in both basic research and industrial environment. Formulation tools for pharmaceutical development considers these key research and industrial tools.Nine chapters by leading contributors cover: Artificial neural networks technology to model, understand, and optimize drug formulations; ME_expert 2.0: a heuristic decision support system for microemulsions formulation development; Expert system for the development and formulation of push-pull osmotic pump tablets containing poorly water-soluble drugs; SeDeM Diagram: an expert system for preformulation, characterization and optimization of tables obtained by direct compression; New SeDeM-ODT expert system: an expert system for formulation of orodispersible tablets obtained by direct compression; and 3D-cellular automata in computer-aided design of pharmaceutical formulations: mathematical concept and F-CAD software. - Coverage of artificial intelligence tools, new expert systems, understanding of pharmaceutical processes, robust development of medicines, and new ways to develop medicines - Development of drugs and medicines using mathematical tools - Compilation of expert system developed around the world
Download or read book Essentials of Fluidization Technology written by John R. Grace and published by John Wiley & Sons. This book was released on 2020-06-15 with total page 626 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise and clear treatment of the fundamentals of fluidization, with a view to its applications in the process and energy industries.
Download or read book The Science and Engineering of Granulation Processes written by Jim Litster and published by Springer Science & Business Media. This book was released on 2004-03-31 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book had its origins in a meeting between two (relatively) young particle technology researchers on Rehobeth Beach in Delaware in 1992 near the holiday house of Reg Davies (then Director of the Particle Science and Technology Research Center in Dupont). As we played in the sand, we shared an excitement for developments in particle technology, especially particle characterization, that would lead operations such as granulation to be placed on a sound scientific and engineering footing. The immediate outcome from this interaction was the development of new industry short courses in granulation and related topics which we taught together both in Australia and North America. This book follows closely the structure and approaches developed in these courses, particularly the emphasis on particle design in granulation, where the impact of both formulation properties and process variables on product attributes needs to be understood and quantified. The book has been a long time in the making. We have been actively preparing the book for at least five years. Although the chapters have relatively good bibliographies, this book is not a review of the field. Rather it is an attempt by the authors to present a comprehensive engineering approach to granulator design, scale up and operation. It is exciting for us to see the explosion of research interest around the world in this area in the last five to seven years. Some of the most recent work will have to find its way into the second edition.
Download or read book Engineered Materials Handbook Desk Edition written by ASM International. Handbook Committee and published by ASM International. This book was released on 1995-11-01 with total page 1313 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference on the properties, selection, processing, and applications of the most widely used nonmetallic engineering materials. Section 1, General Information and Data, contains information applicable both to polymers and to ceramics and glasses. It includes an illustrated glossary, a collection of engineering tables and data, and a guide to materials selection. Sections 2 through 7 focus on polymeric materials--plastics, elastomers, polymer-matrix composites, adhesives, and sealants--with the information largely updated and expanded from the first three volumes of the Engineered Materials Handbook. Ceramics and glasses are covered in Sections 8 through 12, also with updated and expanded information. Annotation copyright by Book News, Inc., Portland, OR
