Download or read book Particles in Flows written by Tomáš Bodnár and published by Birkhäuser. This book was released on 2017-09-30 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to face particles in flows from many different, but essentially interconnected sides and points of view. Thus the selection of authors and topics represented in the chapters, ranges from deep mathematical analysis of the associated models, through the techniques of their numerical solution, towards real applications and physical implications. The scope and structure of the book as well as the selection of authors was motivated by the very successful summer course and workshop "Particles in Flows'' that was held in Prague in the August of 2014. This meeting revealed the need for a book dealing with this specific and challenging multidisciplinary subject, i.e. particles in industrial, environmental and biomedical flows and the combination of fluid mechanics, solid body mechanics with various aspects of specific applications.
Download or read book Flow of Particulates and Fluids written by and published by . This book was released on 1990 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adhesive Particle Flow written by Jeffery S. Marshall and published by Cambridge University Press. This book was released on 2014-03-31 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is targeted at professionals and graduate students working in disciplines where flow of adhesive particles plays a significant role.
Download or read book Computational Techniques for Multiphase Flows written by Guan Heng Yeoh and published by Elsevier. This book was released on 2009-10-07 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mixed or multiphase flows of solid/liquid or solid/gas are commonly found in many industrial fields, and their behavior is complex and difficult to predict in many cases. The use of computational fluid dynamics (CFD) has emerged as a powerful tool for the understanding of fluid mechanics in multiphase reactors, which are widely used in the chemical, petroleum, mining, food, beverage and pharmaceutical industries. Computational Techniques for Multiphase Flows enables scientists and engineers to the undertand the basis and application of CFD in muliphase flow, explains how to use the technique, when to use it and how to interpret the results and apply them to improving aplications in process enginering and other multiphase application areas including the pumping, automotive and energy sectors. - Understandable guide to a complex subject - Important in many industries - Ideal for potential users of CFD
Download or read book Multiphysics Modelling of Fluid Particulate Systems written by Hassan Khawaja and published by Academic Press. This book was released on 2020-03-14 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiphysics Modelling of Fluid-Particulate Systems provides an explanation of how to model fluid-particulate systems using Eulerian and Lagrangian methods. The computational cost and relative merits of the different methods are compared, with recommendations on where and how to apply them provided. The science underlying the fluid-particulate phenomena involves computational fluid dynamics (for liquids and gases), computational particle dynamics (solids), and mass and heat transfer. In order to simulate these systems, it is essential to model the interactions between phases and the fluids and particles themselves. This book details instructions for several numerical methods of dealing with this complex problem. This book is essential reading for researchers from all backgrounds interested in multiphase flows or fluid-solid modeling, as well as engineers working on related problems in chemical engineering, food science, process engineering, geophysics or metallurgical processing. - Provides detailed coverage of Resolved and Unresolved Computational Fluid Dynamics - Discrete Element Method (CFD-DEM), Smoothed Particle Hydrodynamics, and their various attributes - Gives an excellent summary of a range of simulation techniques and provides numerical examples - Starts with a broad introduction to fluid-particulate systems to help readers from a range of disciplines grasp fundamental principles
Download or read book Theory and Modeling of Dispersed Multiphase Turbulent Reacting Flows written by Lixing Zhou and published by Butterworth-Heinemann. This book was released on 2018-01-25 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory and Modeling of Dispersed Multiphase Turbulent Reacting Flows gives a systematic account of the fundamentals of multiphase flows, turbulent flows and combustion theory. It presents the latest advances of models and theories in the field of dispersed multiphase turbulent reacting flow, covering basic equations of multiphase turbulent reacting flows, modeling of turbulent flows, modeling of multiphase turbulent flows, modeling of turbulent combusting flows, and numerical methods for simulation of multiphase turbulent reacting flows, etc. The book is ideal for graduated students, researchers and engineers in many disciplines in power and mechanical engineering. - Provides a combination of multiphase fluid dynamics, turbulence theory and combustion theory - Covers physical phenomena, numerical modeling theory and methods, and their applications - Presents applications in a wide range of engineering facilities, such as utility and industrial furnaces, gas-turbine and rocket engines, internal combustion engines, chemical reactors, and cyclone separators, etc.
Download or read book Capillary Fluid Exchange written by Joshua Scallan and published by Morgan & Claypool Publishers. This book was released on 2010 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: The partition of fluid between the vascular and interstitial compartments is regulated by forces (hydrostatic and oncotic) operating across the microvascular walls and the surface areas of permeable structures comprising the endothelial barrier to fluid and solute exchange, as well as within the extracellular matrix and lymphatics. In addition to its role in the regulation of vascular volume, transcapillary fluid filtration also allows for continuous turnover of water bathing tissue cells, providing the medium for diffusional flux of oxygen and nutrients required for cellular metabolism and removal of metabolic byproducts. Transendothelial volume flow has also been shown to influence vascular smooth muscle tone in arterioles, hydraulic conductivity in capillaries, and neutrophil transmigration across postcapillary venules, while the flow of this filtrate through the interstitial spaces functions to modify the activities of parenchymal, resident tissue, and metastasizing tumor cells. Likewise, the flow of lymph, which is driven by capillary filtration, is important for the transport of immune and tumor cells, antigen delivery to lymph nodes, and for return of filtered fluid and extravasated proteins to the blood. Given this background, the aims of this treatise are to summarize our current understanding of the factors involved in the regulation of transcapillary fluid movement, how fluid movements across the endothelial barrier and through the interstitium and lymphatic vessels influence cell function and behavior, and the pathophysiology of edema formation. Table of Contents: Fluid Movement Across the Endothelial Barrier / The Interstitium / The Lymphatic Vasculature / Pathophysiology of Edema Formation
Download or read book Magnetogasdynamics and Plasma Dynamics written by Shih-I. Pai and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the lecture notes which the author gave in a seminar of the same title in the Institut fur theoretische Gasdynamik, D. V. L. e. V., Aachen, Germany, during the academic year of 1957-1958. The subject matter has been rewritten and expanded after the author's return to the University of Maryland. The purpose of this book is to give a theoretical introduction to plasma dynamics and magnetogasdynamics from the gasdynamic point of view. Attention is given to the basic assumptions and the formulation of the theory of the flow problems of a plasma, an ionized gas, as well as to the various methods of solving these problems. Since plasma dynamics is still in a developing stage, the author hopes that this book _may furnish the readers some basic elements in the theory of plasma -dynamics so that they may find it useful for further study and research in this new field. After the introduction in which the scope of plasma. dynamics is briefly discussed, the fundamental equations of plasma dynamics from the macro scopic point of view, i. e., the theory of continuum has been analyzed, in detail in chapters IT to IV, including many simplified cases sUQh as m,agneto gasdynamics, magnetohydrodynamics, electromaguetodynamics, radiation magnetogasdynamics etc. In chapter V, the important parameters and their range of applicatIons have been treated. The parameters are useful in the correlation of experi mental results.
Download or read book Introduction to Particle Technology written by Martin J. Rhodes and published by John Wiley & Sons. This book was released on 2013-03-25 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle technology is a term used to refer to the science and technology related to the handling and processing of particles and powders. The production of particulate materials, with controlled properties tailored to subsequent processing and applications, is of major interest to a wide range of industries, including chemical and process, food, pharmaceuticals, minerals and metals companies and the handling of particles in gas and liquid solutions is a key technological step in chemical engineering. This textbook provides an excellent introduction to particle technology with worked examples and exercises. Based on feedback from students and practitioners worldwide, it has been newly edited and contains new chapters on slurry transport, colloids and fine particles, size enlargement and the health effects of fine powders. Topics covered include: Characterization (Size Analysis) Processing (Granulation, Fluidization) Particle Formation (Granulation, Size Reduction) Storage and Transport (Hopper Design, Pneumatic Conveying, Standpipes, Slurry Flow) Separation (Filtration, Settling, Cyclones) Safety (Fire and Explosion Hazards, Health Hazards) Engineering the Properties of Particulate Systems (Colloids, Respirable Drugs, Slurry Rheology) This book is essential reading for undergraduate students of chemical engineering on particle technology courses. It is also valuable supplementary reading for students in other branches of engineering, applied chemistry, physics, pharmaceutics, mineral processing and metallurgy. Practitioners in industries in which powders are handled and processed may find it a useful starting point for gaining an understanding of the behavior of particles and powders. Review of the First Edition taken from High Temperatures - High pressures 1999 31 243 – 251 "..This is a modern textbook that presents clear-cut knowledge. It can be successfully used both for teaching particle technology at universities and for individual study of engineering problems in powder processing."
Download or read book Flowing Matter written by Federico Toschi and published by Springer Nature. This book was released on 2019-09-25 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book, published in the Soft and Biological Matter series, presents an introduction to selected research topics in the broad field of flowing matter, including the dynamics of fluids with a complex internal structure -from nematic fluids to soft glasses- as well as active matter and turbulent phenomena. Flowing matter is a subject at the crossroads between physics, mathematics, chemistry, engineering, biology and earth sciences, and relies on a multidisciplinary approach to describe the emergence of the macroscopic behaviours in a system from the coordinated dynamics of its microscopic constituents. Depending on the microscopic interactions, an assembly of molecules or of mesoscopic particles can flow like a simple Newtonian fluid, deform elastically like a solid or behave in a complex manner. When the internal constituents are active, as for biological entities, one generally observes complex large-scale collective motions. Phenomenology is further complicated by the invariable tendency of fluids to display chaos at the large scales or when stirred strongly enough. This volume presents several research topics that address these phenomena encompassing the traditional micro-, meso-, and macro-scales descriptions, and contributes to our understanding of the fundamentals of flowing matter. This book is the legacy of the COST Action MP1305 “Flowing Matter”.
Download or read book Solid Liquid Two Phase Flow written by Sümer M. Peker and published by Elsevier. This book was released on 2011-04-18 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an undertaking of a pioneering work of uniting three vast fields of interfacial phenomena, rheology and fluid mechanics within the framework of solid-liquid two phase flow. No wonder, much finer books will be written in the future as the visionary aims of many nations in combining molecular chemistry, biology, transport and interfacial phenomena for the fundamental understanding of processes and capabilities of new materials will be achieved. Solid-liquid systems where solid particles with a wide range of physical properties, sizes ranging from nano- to macro- scale and concentrations varying from very dilute to highly concentrated, are suspended in liquids of different rheological behavior flowing in various regimes are taken up in this book. Interactions among solid particles in molecular scale are extended to aggregations in the macro scale and related to settling, flow and rheological behavior of the suspensions in a coherent, sequential manner. The classical concept of solid particles is extended to include nanoparticles, colloids, microorganisms and cellular materials. The flow of these systems is investigated under pressure, electrical, magnetic and chemical driving forces in channels ranging from macro-scale pipes to micro channels. Complementary separation and mixing processes are also taken under consideration with micro- and macro-scale counterparts.- Up-to-date including emerging technologies- Coherent, sequential approach- Wide scope: microorganisms, nanoparticles, polymer solutions, minerals, wastewater sludge, etc- All flow conditions, settling and non-settling particles, non-Newtonian flow, etc- Processes accompanying conveying in channels, such as sedimentation, separation, mixing
Download or read book Dynamics of Bubbles Drops and Rigid Particles written by Z. Zapryanov and published by Springer Science & Business Media. This book was released on 1998-12-31 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. Objective and Scope Bubbles, drops and rigid particles occur everywhere in life, from valuable industrial operations like gas-liquid contracting, fluidized beds and extraction to such vital natural processes as fermentation, evaporation, and sedimentation. As we become increasingly aware of their fundamental role in industrial and biological systems, we are driven to know more about these fascinating particles. It is no surprise, therefore, that their practical and theoretical implications have aroused great interest among the scientific community and have inspired a growing number of studies and publications. Over the past ten years advances in the field of small Reynolds numbers flows and their technological and biological applications have given rise to several definitive monographs and textbooks in the area. In addition, the past three decades have witnessed enormous progress in describing quantitatively the behaviour of these particles. However, to the best of our knowledge, there are still no available books that reflect such achievements in the areas of bubble and drop deformation, hydrodynamic interactions of deformable fluid particles at low and moderate Reynolds numbers and hydrodynamic interactions of particles in oscillatory flows. Indeed, only one more book is dedicated entirely to the behaviour of bubbles, drops and rigid particles ["Bubbles, Drops and Particles" by Clift et al. (1978)] and the authors state its limitations clearly in the preface: "We treat only phenomena in which particle-particle interactions are of negligible importance. Hence, direct application of the book is limited to single-particle systems of dilute suspensions.
Download or read book Particles at Fluid Interfaces and Membranes written by P. Kralchevsky and published by . This book was released on 2001-01-22 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Planar fluid interfaces -- Interfaces of moderate curvature : theory of capillarity -- Surface bending moment and curvature elastic moduli -- General curved interfaces and biomembranes -- Liquid films and interactions between particle and surface -- Particles at interfaces : deformations and hydrodynamic interactions -- Lateral capillary forces between partially immersed bodies -- Lateral capillary forces between floating particles -- Capillary forces between particles bound to a spherical interface -- Mechanics of lipid membranes and interaction between inclusions -- Capillary bridges and capillary-bridge forces -- Capillary forces between particles of irregular contact line -- Two-dimensional crystallization of particulates and proteins -- Effect of oil drops and particulates on the stability of foams.
Download or read book Sterile Filtration written by Maik W. Jornitz and published by CRC Press. This book was released on 2020-04-15 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on sterilizing grade filters in the biopharmaceutical industry, emphasizing practical applications of universal and dependable operational protocols, integrity testing, and troubleshooting to streamline the production and preparation of pharmaceuticals. Addresses the complexities of globalizing redundancy in filtration!
Download or read book Unit Operations in Food Processing written by R. L. Earle and published by Elsevier. This book was released on 2013-10-22 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: This long awaited second edition of a popular textbook has a simple and direct approach to the diversity and complexity of food processing. It explains the principles of operations and illustrates them by individual processes. The new edition has been enlarged to include sections on freezing, drying, psychrometry, and a completely new section on mechanical refrigeration. All the units have been converted to SI measure. Each chapter contains unworked examples to help the student gain a grasp of the subject, and although primarily intended for the student food technologist or process engineer, this book will also be useful to technical workers in the food industry
Download or read book Low Reynolds number hydrodynamics written by J. Happel and published by Springer. This book was released on 2012-02-09 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: One studying the motion of fluids relative to particulate systems is soon impressed by the dichotomy which exists between books covering theoretical and practical aspects. Classical hydrodynamics is largely concerned with perfect fluids which unfortunately exert no forces on the particles past which they move. Practical approaches to subjects like fluidization, sedimentation, and flow through porous media abound in much useful but uncorrelated empirical information. The present book represents an attempt to bridge this gap by providing at least the beginnings of a rational approach to fluid particle dynamics, based on first principles. From the pedagogic viewpoint it seems worthwhile to show that the Navier-Stokes equations, which form the basis of all systematic texts, can be employed for useful practical applications beyond the elementary problems of laminar flow in pipes and Stokes law for the motion of a single particle. Although a suspension may often be viewed as a continuum for practical purposes, it really consists of a discrete collection of particles immersed in an essentially continuous fluid. Consideration of the actual detailed boundary value problems posed by this viewpoint may serve to call attention to the limitation of idealizations which apply to the overall transport properties of a mixture of fluid and solid particles.
Download or read book Computational Fluid Dynamics in Fire Engineering written by Guan Heng Yeoh and published by Butterworth-Heinemann. This book was released on 2009-04-20 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fire and combustion presents a significant engineering challenge to mechanical, civil and dedicated fire engineers, as well as specialists in the process and chemical, safety, buildings and structural fields. We are reminded of the tragic outcomes of 'untenable' fire disasters such as at King's Cross underground station or Switzerland's St Gotthard tunnel. In these and many other cases, computational fluid dynamics (CFD) is at the forefront of active research into unravelling the probable causes of fires and helping to design structures and systems to ensure that they are less likely in the future. Computational fluid dynamics (CFD) is routinely used as an analysis tool in fire and combustion engineering as it possesses the ability to handle the complex geometries and characteristics of combustion and fire. This book shows engineering students and professionals how to understand and use this powerful tool in the study of combustion processes, and in the engineering of safer or more fire resistant (or conversely, more fire-efficient) structures.No other book is dedicated to computer-based fire dynamics tools and systems. It is supported by a rigorous pedagogy, including worked examples to illustrate the capabilities of different models, an introduction to the essential aspects of fire physics, examination and self-test exercises, fully worked solutions and a suite of accompanying software for use in industry standard modeling systems. - Computational Fluid Dynamics (CFD) is widely used in engineering analysis; this is the only book dedicated to CFD modeling analysis in fire and combustion engineering - Strong pedagogic features mean this book can be used as a text for graduate level mechanical, civil, structural and fire engineering courses, while its coverage of the latest techniques and industry standard software make it an important reference for researchers and professional engineers in the mechanical and structural sectors, and by fire engineers, safety consultants and regulators - Strong author team (CUHK is a recognized centre of excellence in fire eng) deliver an expert package for students and professionals, showing both theory and applications. Accompanied by CFD modeling code and ready to use simulations to run in industry-standard ANSYS-CFX and Fluent software
