Download or read book A Critical Review of the Intrinsic Nature of Vortex Induced Vibrations written by Turgut Sarpkaya and published by . This book was released on 2003 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a concise and comprehensive review of the progress made during the past two decades on vortex induced vibration (VIV) of mostly circular cylindrical structures subjected to steady uniform flow. The critical elements of the evolution of the ideas, theoretical insights, experimental methods, and numerical models are traced systematically; the strengths and weaknesses of the current state of the understanding of the complex fluid/structure interaction are discussed in some detail. Finally, some suggestions are made for further research on VIV. The organization of the paper is given at the end of the next section.

Download or read book Flow Induced Vibrations written by Tomomichi Nakamura and published by Butterworth-Heinemann. This book was released on 2013-12-06 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: In many plants, vibration and noise problems occur due to fluid flow, which can greatly disrupt smooth plant operations. These flow-related phenomena are called flow-induced vibration. This book explains how and why such vibrations happen and provides hints and tips on how to avoid them in future plant design. The world-leading author team doesn't assume prior knowledge of mathematical methods and provides the reader with information on the basics of modeling. The book includes several practical examples and thorough explanations of the structure, the evaluation method and the mechanisms to aid understanding of flow-induced vibrations. - Helps ensure smooth plant operations - Explains the structure, evaluation method and mechanisms - Shows how to avoid vibrations in future plant design

Download or read book Fluid Structure Interactions written by Michael P. Païdoussis and published by Cambridge University Press. This book was released on 2014-01-02 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structures in contact with fluid flow, whether natural or man-made, are inevitably subject to flow-induced forces and flow-induced vibration: from plant leaves to traffic signs and to more substantial structures, such as bridge decks and heat exchanger tubes. Under certain conditions the vibration may be self-excited, and it is usually referred to as an instability. These instabilities and, more specifically, the conditions under which they arise are of great importance to designers and operators of the systems concerned because of the significant potential to cause damage in the short term. Such flow-induced instabilities are the subject of this book. In particular, the flow-induced instabilities treated in this book are associated with cross-flow, that is, flow normal to the long axis of the structure. The book treats a specific set of problems that are fundamentally and technologically important: galloping, vortex-shedding oscillations under lock-in conditions, and rain-and-wind-induced vibrations, among others. The emphasis throughout is on providing a physical description of the phenomena that is as clear and up-to-date as possible.

Download or read book Flow Induced Vibrations written by Eduard Naudascher and published by Courier Corporation. This book was released on 2012-03-27 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite their variety, the vibration phenomena from many different engineering fields can be classified into a relatively few basic excitation mechanisms. The classification enables engineers to identify all possible sources of excitation in a given system and to assess potential dangers. This graduate-level text presents a synthesis of research results and practical experience from disparate fields in the form of engineering guidelines. It is particularly geared toward assessing the possible sources of excitation in a flow system, in identifying the actual danger spots, and in finding appropriate remedial measures or cures. Flow-induced vibrations are presented in terms of their basic elements: body oscillators, fluid oscillators, and sources of excitation. By stressing these basic elements, the authors provide a basis for the transfer of knowledge from one system to another, as well as from one engineering field to another. In this manner, well-known theories on cylinders in cross-flow or well-executed solutions from the field of wind engineering--to name just two examples--may be useful in other systems or fields on which information is scarce. The unified approach is broad enough to permit treatment of the major excitation mechanism, yet simple enough to be of practical use.

Download or read book Flow induced Vibration written by Robert D. Blevins and published by . This book was released on 2001-01-01 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focuses on applications for offshore platforms and piping; and, wind-induced vibration of buildings, bridges, and towers. This title also focuses on acoustic and mechanical vibration of heat exchangers, power lines, and process ducting.

Download or read book Flow induced Vibrations written by and published by . This book was released on 1996 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hydrodynamics Around Cylindrical Structures written by Jorgen Fredsoe and published by World Scientific. This book was released on 1997-03-17 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the subject of wave/current flow around a cylinder, the forces induced on the cylinder by the flow, and the vibration pattern of slender structures in a marine environment.The primary aim of the book is to describe the flow pattern and the resulting load which develops when waves or current meet a cylinder. Attention is paid to the special case of a circular cylinder. The development in the forces is related to the various flow patterns and is discussed in detail. Regular as well as irregular waves are considered, and special cases like wall proximities (pipelines) are also investigated.The book is intended for MSc students with some experience in basic fluid mechanics and for PhD students.

Download or read book Formulas for Dynamics Acoustics and Vibration written by Robert D. Blevins and published by John Wiley & Sons. This book was released on 2016-05-03 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: With Over 60 tables, most with graphic illustration, and over 1000 formulas, Formulas for Dynamics, Acoustics, and Vibration will provide an invaluable time-saving source of concise solutions for mechanical, civil, nuclear, petrochemical and aerospace engineers and designers. Marine engineers and service engineers will also find it useful for diagnosing their machines that can slosh, rattle, whistle, vibrate, and crack under dynamic loads.

Download or read book Flow Induced Vibration Handbook for Nuclear and Process Equipment written by Michel J. Pettigrew and published by John Wiley & Sons. This book was released on 2021-12-09 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains the mechanisms governing flow-induced vibrations and helps engineers prevent fatigue and fretting-wear damage at the design stage Fatigue or fretting-wear damage in process and plant equipment caused by flow-induced vibration can lead to operational disruptions, lost production, and expensive repairs. Mechanical engineers can help prevent or mitigate these problems during the design phase of high capital cost plants such as nuclear power stations and petroleum refineries by performing thorough flow-induced vibration analysis. Accordingly, it is critical for mechanical engineers to have a firm understanding of the dynamic parameters and the vibration excitation mechanisms that govern flow-induced vibration. Flow-Induced Vibration Handbook for Nuclear and Process Equipment provides the knowledge required to prevent failures due to flow-induced vibration at the design stage. The product of more than 40 years of research and development at the Canadian Nuclear Laboratories, this authoritative reference covers all relevant aspects of flow-induced vibration technology, including vibration failures, flow velocity analysis, vibration excitation mechanisms, fluidelastic instability, periodic wake shedding, acoustic resonance, random turbulence, damping mechanisms, and fretting-wear predictions. Each in-depth chapter contains the latest available lab data, a parametric analysis, design guidelines, sample calculations, and a brief review of modelling and theoretical considerations. Written by a group of leading experts in the field, this comprehensive single-volume resource: Helps readers understand and apply techniques for preventing fatigue and fretting-wear damage due to flow-induced vibration at the design stage Covers components including nuclear reactor internals, nuclear fuels, piping systems, and various types of heat exchangers Features examples of vibration-related failures caused by fatigue or fretting-wear in nuclear and process equipment Includes a detailed overview of state-of-the-art flow-induced vibration technology with an emphasis on two-phase flow-induced vibration Covering all relevant aspects of flow-induced vibration technology, Flow-Induced Vibration Handbook for Nuclear and Process Equipment is required reading for professional mechanical engineers and researchers working in the nuclear, petrochemical, aerospace, and process industries, as well as graduate students in mechanical engineering courses on flow-induced vibration.

Download or read book Vibration Problems in Structures written by Hugo Bachmann and published by Birkhäuser. This book was released on 2012-12-06 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authors: Hugo Bachmann, Walter J. Ammann, Florian Deischl, Josef Eisenmann, Ingomar Floegl, Gerhard H. Hirsch, Günter K. Klein, Göran J. Lande, Oskar Mahrenholtz, Hans G. Natke, Hans Nussbaumer, Anthony J. Pretlove, Johann H. Rainer, Ernst-Ulrich Saemann, Lorenz Steinbeisser. Large structures such as factories, gymnasia, concert halls, bridges, towers, masts and chimneys can be detrimentally affected by vibrations. These vibrations can cause either serviceability problems, severely hampering the user's comfort, or safety problems. The aim of this book is to provide structural and civil engineers working in construction and environmental engineering with practical guidelines for counteracting vibration problems. Dynamic actions are considered from the following sources of vibration: - human body motions, - rotating, oscillating and impacting machines, - wind flow, - road traffic, railway traffic and construction work. The main section of the book presents tools that aid in decision-making and in deriving simple solutions to cases of frequently occurring "normal" vibration problems. Complexer problems and more advanced solutions are also considered. In all cases these guidelines should enable the engineer to decide on appropriate solutions expeditiously. The appendices of the book contain fundamentals essential to the main chapters.

Download or read book Springer Handbook of Ocean Engineering written by Manhar R. Dhanak and published by Springer. This book was released on 2016-07-23 with total page 1344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is the definitive reference for the interdisciplinary field that is ocean engineering. It integrates the coverage of fundamental and applied material and encompasses a diverse spectrum of systems, concepts and operations in the maritime environment, as well as providing a comprehensive update on contemporary, leading-edge ocean technologies. Coverage includes an overview on the fundamentals of ocean science, ocean signals and instrumentation, coastal structures, developments in ocean energy technologies and ocean vehicles and automation. It aims at practitioners in a range of offshore industries and naval establishments as well as academic researchers and graduate students in ocean, coastal, offshore and marine engineering and naval architecture. The Springer Handbook of Ocean Engineering is organized in five parts: Part A: Fundamentals, Part B: Autonomous Ocean Vehicles, Subsystems and Control, Part C: Coastal Design, Part D: Offshore Technologies, Part E: Energy Conversion

Download or read book Applied Structural and Mechanical Vibrations written by Paolo L. Gatti and published by CRC Press. This book was released on 2014-02-24 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Applied Structural and Mechanical Vibrations: Theory and Methods continues the first edition’s dual focus on the mathematical theory and the practical aspects of engineering vibrations measurement and analysis. This book emphasises the physical concepts, brings together theory and practice, and includes a number of worked-out examples of varying difficulty and an extensive list of references. What’s New in the Second Edition: Adds new material on response spectra Includes revised chapters on modal analysis and on probability and statistics Introduces new material on stochastic processes and random vibrations The book explores the theory and methods of engineering vibrations. By also addressing the measurement and analysis of vibrations in real-world applications, it provides and explains the fundamental concepts that form the common background of disciplines such as structural dynamics, mechanical, aerospace, automotive, earthquake, and civil engineering. Applied Structural and Mechanical Vibrations: Theory and Methods presents the material in order of increasing complexity. It introduces the simplest physical systems capable of vibratory motion in the fundamental chapters, and then moves on to a detailed study of the free and forced vibration response of more complex systems. It also explains some of the most important approximate methods and experimental techniques used to model and analyze these systems. With respect to the first edition, all the material has been revised and updated, making it a superb reference for advanced students and professionals working in the field.

Download or read book Fluid Vortices written by Sheldon Green and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 905 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid Vortices is a comprehensive, up-to-date, research-level overview covering all salient flows in which fluid vortices play a significant role. The various chapters have been written by specialists from North America, Europe and Asia, making for unsurpassed depth and breadth of coverage. Topics addressed include fundamental vortex flows (mixing layer vortices, vortex rings, wake vortices, vortex stability, etc.), industrial and environmental vortex flows (aero-propulsion system vortices, vortex-structure interaction, atmospheric vortices, computational methods with vortices, etc.), and multiphase vortex flows (free-surface effects, vortex cavitation, and bubble and particle interactions with vortices). The book can also be recommended as an advanced graduate-level supplementary textbook. The first nine chapters of the book are suitable for a one-term course; chapters 10--19 form the basis for a second one-term course.

Download or read book Nonlinear Structures and Systems Volume 1 written by Gaetan Kerschen and published by Springer. This book was released on 2019-06-28 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear Structures & Systems, Volume 1: Proceedings of the 37th IMAC, A Conference and Exposition on Structural Dynamics, 2019, the first volume of eight from the Conference brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Nonlinear Dynamics, including papers on: Nonlinear Reduced-order Modeling Jointed Structures: Identification, Mechanics, Dynamics Experimental Nonlinear Dynamics Nonlinear Model & Modal Interactions Nonlinear Damping Nonlinear Modeling & Simulation Nonlinearity & System Identification

Download or read book Vibration of Continuous Systems written by Singiresu S. Rao and published by John Wiley & Sons. This book was released on 2019-03-06 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: A revised and up-to-date guide to advanced vibration analysis written by a noted expert The revised and updated second edition of Vibration of Continuous Systems offers a guide to all aspects of vibration of continuous systems including: derivation of equations of motion, exact and approximate solutions and computational aspects. The author—a noted expert in the field—reviews all possible types of continuous structural members and systems including strings, shafts, beams, membranes, plates, shells, three-dimensional bodies, and composite structural members. Designed to be a useful aid in the understanding of the vibration of continuous systems, the book contains exact analytical solutions, approximate analytical solutions, and numerical solutions. All the methods are presented in clear and simple terms and the second edition offers a more detailed explanation of the fundamentals and basic concepts. Vibration of Continuous Systems revised second edition: Contains new chapters on Vibration of three-dimensional solid bodies; Vibration of composite structures; and Numerical solution using the finite element method Reviews the fundamental concepts in clear and concise language Includes newly formatted content that is streamlined for effectiveness Offers many new illustrative examples and problems Presents answers to selected problems Written for professors, students of mechanics of vibration courses, and researchers, the revised second edition of Vibration of Continuous Systems offers an authoritative guide filled with illustrative examples of the theory, computational details, and applications of vibration of continuous systems.

Download or read book Mechanical Design of Heat Exchangers written by Krishna P. Singh and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 1054 pages. Available in PDF, EPUB and Kindle. Book excerpt: A tubular heat exchanger exemplifies many aspects of the challenge in designing a pressure vessel. High or very low operating pressures and temperatures, combined with sharp temperature gradients, and large differences in the stiffnesses of adjoining parts, are amongst the legion of conditions that behoove the attention of the heat exchanger designer. Pitfalls in mechanical design may lead to a variety of operational problems, such as tube-to-tubesheet joint failure, flanged joint leakage, weld cracks, tube buckling, and flow induced vibration. Internal failures, such as pass partition bowing or weld rip-out, pass partition gasket rib blow-out, and impingement actuated tube end erosion are no less menacing. Designing to avoid such operational perils requires a thorough grounding in several disciplines of mechanics, and a broad understanding of the inter relationship between the thermal and mechanical performance of heat exchangers. Yet, while there are a number of excellent books on heat ex changer thermal design, comparable effort in mechanical design has been non-existent. This apparent void has been filled by an assortment of national codes and industry standards, notably the "ASME Boiler and Pressure Vessel Code" and the "Standards of Tubular Exchanger Manufacturers Association. " These documents, in conjunction with scattered publications, form the motley compendia of the heat exchanger designer's reference source. The subject matter clearly beckons a methodical and comprehensive treatment. This book is directed towards meeting this need.

Download or read book Flow induced Vibrations an Engineering Guide written by Eduard Naudascher and published by Routledge. This book was released on 2017-11-13 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for engineers, this work considers flow-induced vibrations. It covers topics such as body oscillators; fluid loading and response of body oscillators; fluid oscillators; vibrations due to extraneously-induced excitation; and vibrations due to instability-induced excitation.