Download or read book Flow Induced Crystallization of Polymers written by Gaetano Guerra and published by Wiley-VCH. This book was released on 2002-12-20 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: In polymer processing, the molecular orientation induced by flow has a significant effect on the crystallization kinetics and final morphology of the polymer produced. The impact on processing operations and object properties is extremely important and recently scientific and technological researchers have begun to quanitify these effects. The international conference 'Flow-Induced Crystallization of Polymers', held in October 2001 in Salerno, Italy, was timely and well attended. An interdisciplinary approach was taken and presentations were made on topics ranging from real-time measurement, through modelling, to final morphology and properties of polymers. Invited and other selected contributions from the conference are collected here, in this volume of Macromolecular Symposia

Download or read book Flow Induced Alignment in Composite Materials written by T.D. Papathanasiou and published by Woodhead Publishing. This book was released on 2021-10-19 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of aligning short fibers in a fiber-reinforced material is to improve the mechanical properties of the resulting composite. Aligning the fibers, generally in a preferred direction, allows them to contribute as much as possible to reinforcing the material. The first edition of this book detailed, in a single volume, the science, processing, applications, characterization and properties of composite materials reinforced with short fibers that have been orientated in a preferred direction by flows arising during processing. The technology of fiber-reinforced composites is continually evolving and this new edition provides timely and much needed information about this important class of engineering materials. Each of the original chapters have been brought fully up-to-date and new developments such as: the advent of nano-composites and the issues relating to their alignment; the wider use of long-fiber composites and the appearance of models able to capture their orientation during flow; the wider use of flows in micro-channels in the context of composites fabrication; and the increase in computing power, which has made relevant simulations (especially coupling flow kinematics to fiber content and orientation) much easier to perform are all covered in detail. The book will be an essential up-to-date reference resource for materials scientists, students, and engineers who are working in the relevant areas of particulate composites, short fiber-reinforced composites or nanocomposites. - Presents recent progress on flow-induced alignment, modelling and design of fiber and particulate filled polymer composites - Discusses important advances such as alignment of CNTs in polymer nanocomposites and molecular alignment of polymers induced by the injection molding process in the presence of fillers such as short fibers - Presents fiber interaction/diffusion modelling and also the fiber flexure/breakage models

Download or read book Handbook of Polymer Crystallization written by Ewa Piorkowska and published by John Wiley & Sons. This book was released on 2013-05-30 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric crystals are more complex in nature than other materials' crystal structures due to significant structural disorder present. The only comprehensive reference on polymer crystallization, Handbook of Polymer Crystallization provides readers with a broad, in-depth guide on the subject, covering the numerous problems encountered during crystallization as well as solutions to resolve those problems to achieve the desired result. Edited by leading authorities in the field, topics explored include neat polymers, heterogeneous systems, polymer blends, polymer composites orientation induced crystallization, crystallization in nanocomposites, and crystallization in complex thermal processing conditions.

Download or read book Melt Rheology and Its Role in Plastics Processing written by K. Wissbrun and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed to fulfill a dual role. On the one hand it provides a description of the rheological behavior of molten poly mers. On the other, it presents the role of rheology in melt processing operations. The account of rheology emphasises the underlying principles and presents results, but not detailed deriva tions of equations. The processing operations are described qualita tively, and wherever possible the role of rheology is discussed quantitatively. Little emphasis is given to non-rheological aspects of processes, for example, the design of machinery. The audience for which the book is intended is also dual in It includes scientists and engineers whose work in the nature. plastics industry requires some knowledge of aspects of rheology. Examples are the polymer synthetic chemist who is concerned with how a change in molecular weight will affect the melt viscosity and the extrusion engineer who needs to know the effects of a change in molecular weight distribution that might result from thermal degra dation. The audience also includes post-graduate students in polymer science and engineering who wish to acquire a more extensive background in rheology and perhaps become specialists in this area. Especially for the latter audience, references are given to more detailed accounts of specialized topics, such as constitutive relations and process simulations. Thus, the book could serve as a textbook for a graduate level course in polymer rheology, and it has been used for this purpose.

Download or read book Handbook of Industrial Polyethylene and Technology written by Mark A. Spalding and published by John Wiley & Sons. This book was released on 2017-10-26 with total page 1671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides an exhaustive description of polyethylene. The 50+ chapters are written by some of the most experienced and prominent authors in the field, providing a truly unique view of polyethylene. The book starts with a historical discussion on how low density polyethylene was discovered and how it provided unique opportunities in the early days. New catalysts are presented and show how they created an expansion in available products including linear low density polyethylene, high density polyethylene, copolymers, and polyethylene produced from metallocene catalysts. With these different catalysts systems a wide range of structures are possible with an equally wide range of physical properties. Numerous types of additives are presented that include additives for the protection of the resin from the environment and processing, fillers, processing aids, anti-fogging agents, pigments, and flame retardants. Common processing methods including extrusion, blown film, cast film, injection molding, and thermoforming are presented along with some of the more specialized processing techniques such as rotational molding, fiber processing, pipe extrusion, reactive extrusion, wire and cable, and foaming processes. The business of polyethylene including markets, world capacity, and future prospects are detailed. This handbook provides the most current and complete technology assessments and business practices for polyethylene resins.

Download or read book Crystallization Modalities in Polymer Melt Processing written by Hermann Janeschitz-Kriegl and published by Springer Science & Business Media. This book was released on 2009-09-18 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structure formation in crystallizing polymers, as occurring during processing, has not been treated so far in a coherent form. This fact explains, why this monograph is written as the ?rst book devoted to this subject. A quarter of a century ago the underdevelopment of this subject was obvious. Trial and error dominated. In fact, other apposite subjects as polymer melt rheology or heat transfer, had reached high levels. A great number of books has been devoted to them. Mold ?lling of amorphous polymers and the solidi?cation of these polymers by vitri?cation can nowadays be simulated numerically with a high degree of accuracy. In the solidi?ed sample even residual stresses and corresponding birefringence effects can accurately be 1 calculated . However, semicrystalline polymers, which form the majority of industrial po- mers, have been excluded from these considerations for good reasons. In fact, great uncertainties existed about the formation of quality determining crystalline str- tures. In particular, polyole?ns suffered from this shortcoming. In 1983 this fact instigated the polymer research group at the Johannes Kepler University in Linz to start with pertinent activities. The urgency of this kind of studies becomes evident, if advantages and hitches of these polymers are considered. 1. Versatility of processing: Injection molding into a great variety of shapes and sizes, from thin walled beakers to garden chairs, not to forget pipe and pro?le extrusion, cable coating, ?ber spinning, ?lm blowing. 2. Product qualities: Ductility, low density, good electric insulation, corrosion resistance, surface quality.

Download or read book Handbook of Thermal Analysis and Calorimetry written by and published by Elsevier. This book was released on 2018-03-12 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Thermal Analysis and Calorimetry: Recent Advances, Techniques and Applications, Volume Six, Second Edition, presents the latest in a series that has been well received by the thermal analysis and calorimetry community. This volume covers recent advances in techniques and applications that complement the earlier volumes. There has been tremendous progress in the field in recent years, and this book puts together the most high-impact topics selected for their popularity by new editors Sergey Vyazovkin, Nobuyoshi Koga and Christoph Schick—all editors of Thermochimica Acta. Among the important new techniques covered are biomass conversion; sustainable polymers; polymer nanocompsoties; nonmetallic glasses; phase change materials; propellants and explosives; applications to pharmaceuticals; processes in ceramics, metals, and alloys; ionic liquids; fast-scanning calorimetry, and more. - Features 19 all-new chapters to bring readers up to date on the current status of the field - Provides a broad overview of recent progress in the most popular techniques and applications - Includes chapters authored by a recognized leader in each field and compiled by a new team of editors, each with at least 20 years of experience in the field of thermal analysis and calorimetry - Enables applications across a wide range of modern materials, including polymers, metals, alloys, ceramics, energetics and pharmaceutics - Overviews the current status of the field and summarizes recent progress in the most popular techniques and applications

Download or read book Advances in Nanotechnology Research and Application 2012 Edition written by and published by ScholarlyEditions. This book was released on 2012-12-26 with total page 14170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Nanotechnology Research and Application / 2012 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Nanotechnology. The editors have built Advances in Nanotechnology Research and Application / 2012 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Nanotechnology in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Advances in Nanotechnology Research and Application / 2012 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Download or read book Rheo Physics of Multiphase Polymer Systems written by Kai Sondergaard and published by CRC Press. This book was released on 1995-06-02 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: FROM THE PREFACE Almost all polymeric systems are subjected to a flow field at least once along the route between preparation and application. . . . There is also an increased interest in predictive models on phase behavior and suitable techniques for characterizing the structure of these systems when subjected to flow. Multiphase polymeric systems are particularly susceptible to flow, which may cause orientation of species, morphological changes, and phase transitions. All these events may, in turn, affect the end product properties, such as permeability, electrical conductivity, [and] mechanical properties. In processing, escalating needs have evolved for optimization and development of novel and more uniform product properties and increased productivity. In order to arrive at an understanding of processing polymeric systems under elastic flow conditions, it is convenient to analyze the basic physical mechanisms under conditions that enable development of predictive models in conjunction with controlled experimentation. . . . In recent years, the science of rheo-physics has evolved and now involves both advanced theories and experimental techniques. Rheo-physics means the rheological, morphological, and thermodynamic behavior of structured polymer systems during flow. . . . In this monograph, the rheo-optical techniques are . . . emphasized. The book gives an introduction to rheo-physics, including fundamentals of theories, and a representative selection of applications of rheo-optical techniques for analyzing multiphase systems. The chapters contain both practical advice for the new experimenter . . . as well as review material for the experienced scientist.

Download or read book Mechanical Properties of Polymers based on Nanostructure and Morphology written by G. H. Michler and published by CRC Press. This book was released on 2016-04-19 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: The improvement of strength and durability in polymers has implications relevant to industrial, medical, and household applications. Enhanced by the improved knowledge of the interactions between complex hierarchical structures and functional requirements, Mechanical Properties of Polymers Based on Nanostructure and Morphology focuses on new polyme

Download or read book Polyenes Advances in Research and Application 2012 Edition written by and published by ScholarlyEditions. This book was released on 2012-12-26 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyenes—Advances in Research and Application: 2012 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Polyenes. The editors have built Polyenes—Advances in Research and Application: 2012 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Polyenes in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Polyenes—Advances in Research and Application: 2012 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Download or read book The Science and Technology of Flexible Packaging written by Barry A. Morris and published by William Andrew. This book was released on 2022-07-23 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science and Technology of Flexible Packaging: Multilayer Films from Resin and Process to End Use, Second Edition provides a comprehensive guide on plastic films in flexible packaging, covering scientific principles, materials properties, processes and end use considerations. Sections discuss the science of multilayer films in a concise and impactful way, presenting the fundamental understanding required to improve product design, material selection and processes. In addition, the book includes information on why one material is favored over another and how film or coating affects material properties. Descriptions and analysis of key properties of packaging films are provided from engineering and scientific perspectives. With essential scientific insights, best practice techniques, environmental sustainability information and key principles of structure design, this book provides information aids in material selection and processing, how to shorten development times and deliver stronger products, and ways to enable engineers and scientists to deliver superior products with reduced development time and cost. - Provides essential information on all aspects of multilayer films in flexible packaging, including processing, properties, materials and end use - Bridges the gap between scientific principles and practical challenges - Includes explanations to assist practitioners in overcoming challenges - Enables the reader to address new challenges, such as design for sustainability and eCommerce

Download or read book Polymer Crystallization II written by Finizia Auriemma and published by Springer. This book was released on 2016-12-21 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Polymer Science presents critical reviews of the present and future trends in polymer and biopolymer science. It covers all areas of research in polymer and biopolymer science including chemistry, physical chemistry, physics, material science. The thematic volumes are addressed to scientists, whether at universities or in industry, who wish to keep abreast of the important advances in the covered topics. Advances in Polymer Science enjoys a longstanding tradition and good reputation in its community. Each volume is dedicated to a current topic, and each review critically surveys one aspect of that topic, to place it within the context of the volume. The volumes typically summarize the significant developments of the last 5 to 10 years and discuss them critically, presenting selected examples, explaining and illustrating the important principles, and bringing together many important references of primary literature. On that basis, future research directions in the area can be discussed. Advances in Polymer Science volumes thus are important references for every polymer scientist, as well as for other scientists interested in polymer science - as an introduction to a neighboring field, or as a compilation of detailed information for the specialist. Review articles for the individual volumes are invited by the volume editors. Single contributions can be specially commissioned. Readership: Polymer scientists, or scientists in related fields interested in polymer and biopolymer science, at universities or in industry, graduate students

Download or read book Polyolefin Compounds and Materials written by Mariam Al-Ali AlMa'adeed and published by Springer. This book was released on 2015-12-23 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes industrial applications of polyolefins from the researchers' perspective. Polyolefins constitute today arguably the most important class of polymers and polymeric materials for widespread industrial applications. This book summarizes the present state of the art. Starting from fundamental aspects, such as the polymerization techniques to synthesize polyolefins, the book introduces the topic. Basic knowledge about polyolefin composites and blends is explained, before applications aspects in different industry sectors are discussed. The spectrum comprises a wide range of applications and industry sectors, such as the packaging and food industry, the textile industry, automotive and buildings, and even biomedical applications. Topics, which are addressed in the various chapters, comprise synthesis and processing of the materials; their classification; mechanical, physical and technical requirements and properties; their characterization; and many more. In the end of the book, even the disposal, degradation and recycling of polyolefins are addressed, and light is shed on their commercial significance and economic value. In this way, the book follows the entire 'lifetime' of polyolefin compounds and materials: from their synthesis and processing, over applications, to the recycling and reuse of disposed or degraded polyolefin substrates.

Download or read book Theoretical and Applied Rheology written by P. Moldenaers and published by Elsevier. This book was released on 2013-10-22 with total page 1110 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than 900 authors from over 35 countries contributed to the 1992 International Congress on Rheology. These proceedings volumes comprise 17 plenary and keynote papers, 250 oral contributions and some 200 poster presentations. All relevant aspects of rheology are covered, e.g., theoretical rheology, molecular theories, fluid mechanics, rheometry, experimental methods, foams, polymer solutions, polymer melts, rubber, solids, composites, biorheology, industrial rheology, polymer processing, food rheology and electrorheology, reflecting the development of rheology into a broad, multidisciplinary field of recognized academic and industrial relevance.

Download or read book Journal of Rheology written by and published by . This book was released on 2007 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polymer Crystallization I written by Finizia Auriemma and published by Springer. This book was released on 2016-12-21 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: The series Advances in Polymer Science presents critical reviews of the present and future trends in polymer and biopolymer science. It covers all areas of research in polymer and biopolymer science including chemistry, physical chemistry, physics, material science. The thematic volumes are addressed to scientists, whether at universities or in industry, who wish to keep abreast of the important advances in the covered topics. Advances in Polymer Science enjoys a longstanding tradition and good reputation in its community. Each volume is dedicated to a current topic, and each review critically surveys one aspect of that topic, to place it within the context of the volume. The volumes typically summarize the significant developments of the last 5 to 10 years and discuss them critically, presenting selected examples, explaining and illustrating the important principles, and bringing together many important references of primary literature. On that basis, future research directions in the area can be discussed. Advances in Polymer Science volumes thus are important references for every polymer scientist, as well as for other scientists interested in polymer science - as an introduction to a neighboring field, or as a compilation of detailed information for the specialist. Review articles for the individual volumes are invited by the volume editors. Single contributions can be specially commissioned. Readership: Polymer scientists, or scientists in related fields interested in polymer and biopolymer science, at universities or in industry, graduate students