Download or read book Flow in Curved Ducts of Varying Cross section written by Fotis Sotiropoulos and published by . This book was released on 1992 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laminar Flow Forced Convection in Ducts written by R. K. Shah and published by Academic Press. This book was released on 2014-06-28 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laminar Flow Forced Convection in Ducts is a sourcebook for compact heat exchanger analytical data. This book describes the analytical solutions for laminar fluid flow and forced convection heat transfer in circular and noncircular pipes, including applicable differential equations and boundary conditions involving velocity and temperature problems of fluid flow. The book also discusses fluid flow—how much power is required to pump fluids through the heat exchanger, as well as the heat transfer—the determination of q" distribution, and the temperature of fluid and walls. The text also analyzes the coolant or heat transfer fluid flows in a nuclear power reactor composed of a bundle of circular section fuel rods located inside a round tube. R.A. Axford addresses fluid flow and heat transfers results for the rod bundle geometry in "Heat Transfer in Rod Bundles." The book also provides an overview and guidelines that can be used for the designer and the applied mathematician. This book is suitable for engineers working in electronics, aerospace, instrumentation, and biomechanics that use cooling or heating exchanges or solar collection systems.
Download or read book Discrete Cosine and Sine Transforms written by Vladimir Britanak and published by Elsevier. This book was released on 2010-07-28 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Discrete Cosine Transform (DCT) is used in many applications by the scientific, engineering and research communities and in data compression in particular. Fast algorithms and applications of the DCT Type II (DCT-II) have become the heart of many established international image/video coding standards. Since then other forms of the DCT and Discrete Sine Transform (DST) have been investigated in detail. This new edition presents the complete set of DCT and DST discrete trigonometric transforms, including their definitions, general mathematical properties, and relations to the optimal Karhunen-Loéve transform (KLT), with the emphasis on fast algorithms (one-dimensional and two-dimensional) and integer approximations of DCTs and DSTs for their efficient implementations in the integer domain. DCTs and DSTs are real-valued transforms that map integer-valued signals to floating-point coefficients. To eliminate the floating-point operations, various methods of integer approximations have been proposed to construct and flexibly generate a family of integer DCT and DST transforms with arbitrary accuracy and performance. The integer DCTs/DSTs with low-cost and low-powered implementation can replace the corresponding real-valued transforms in wireless and satellite communication systems as well as portable computing applications. The book is essentially a detailed excursion on orthogonal/orthonormal DCT and DST matrices, their matrix factorizations and integer aproximations. It is hoped that the book will serve as a valuable reference for industry, academia and research institutes in developing integer DCTs and DSTs as well as an inspiration source for further advanced research. - Presentation of the complete set of DCTs and DSTs in context of entire class of discrete unitary sinusoidal transforms: the origin, definitions, general mathematical properties, mutual relationships and relations to the optimal Karhunen-Loéve transform (KLT) - Unified treatment with the fast implementations of DCTs and DSTs: the fast rotation-based algorithms derived in the form of recursive sparse matrix factorizations of a transform matrix including one- and two-dimensional cases - Detailed presentation of various methods and design approaches to integer approximation of DCTs and DSTs utilizing the basic concepts of linear algebra, matrix theory and matrix computations leading to their efficient multiplierless real-time implementations, or in general reversible integer-to-integer implementations - Comprehensive list of additional references reflecting recent/latest developments in the efficient implementations of DCTs and DSTs mainly one-, two-, three- and multi-dimensional fast DCT/DST algorithms including the recent active research topics for the time period from 1990 up to now
Download or read book An Overview of Heat Transfer Phenomena written by Salim Newaz Kazi and published by IntechOpen. This book was released on 2012-10-31 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the wake of energy crisis due to rapid growth of industries, urbanization, transportation, and human habit, the efficient transfer of heat could play a vital role in energy saving. Industries, household requirements, offices, transportation are all dependent on heat exchanging equipment. Considering these, the present book has incorporated different sections related to general aspects of heat transfer phenomena, convective heat transfer mode, boiling and condensation, heat transfer to two phase flow and heat transfer augmentation by different means.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Direct and Large Eddy Simulation I written by Peter R. Voke and published by Springer Science & Business Media. This book was released on 1994-10-31 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is a truism that turbulence is an unsolved problem, whether in scientific, engin eering or geophysical terms. It is strange that this remains largely the case even though we now know how to solve directly, with the help of sufficiently large and powerful computers, accurate approximations to the equations that govern tur bulent flows. The problem lies not with our numerical approximations but with the size of the computational task and the complexity of the solutions we gen erate, which match the complexity of real turbulence precisely in so far as the computations mimic the real flows. The fact that we can now solve some turbu lence in this limited sense is nevertheless an enormous step towards the goal of full understanding. Direct and large-eddy simulations are these numerical solutions of turbulence. They reproduce with remarkable fidelity the statistical, structural and dynamical properties of physical turbulent and transitional flows, though since the simula tions are necessarily time-dependent and three-dimensional they demand the most advanced computer resources at our disposal. The numerical techniques vary from accurate spectral methods and high-order finite differences to simple finite-volume algorithms derived on the principle of embedding fundamental conservation prop erties in the numerical operations. Genuine direct simulations resolve all the fluid motions fully, and require the highest practical accuracy in their numerical and temporal discretisation. Such simulations have the virtue of great fidelity when carried out carefully, and repre sent a most powerful tool for investigating the processes of transition to turbulence.
Download or read book Computation of Laminar and Turbulent Flow in Curved Ducts Channels and Pipes Using the Navier Stokes Equations written by R. C. Buggeln and published by . This book was released on 1980 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: Both laminar and turbulent flows in strongly curved ducts, channels, and pipes are studied by numerical methods. The study concentrates on the curved square-duct geometry and flow conditions for which detailed measurements have been obtained recently by Taylor, Whitelaw, and Yianneskis. The solution methodology encompasses solution of the compressible ensemble-averaged Navier-Stokes equations at low Mach number using a split linearized block implicit (LBI) scheme, and rapid convergence on the order of 80 noniterative time steps is obtained. The treatment of turbulent flows includes resolution of the viscous sublayer region. A series of solutions for both laminar and turbulent flow and for both two- and three-dimensional geometries of the same curvature are presented. The accuracy of these solutions is explored by mesh refinement and by comparison with experiment. In summary, good qualitative and reasonable quantitative agreement between solution and experiment is obtained. Collectively, this sequence of results serves to clarify the physical structure of these flows and hence how grid selection procedures might be adjusted to improve the numerical accuracy and experimental agreement. For a three-dimensional flow of considerable complexity, the relatively good agreement with experiment obtained for the turbulent flow case despite a coarse grid must be regarded as encouraging. (Author).
Download or read book Duct Acoustics written by Erkan Dokumacı and published by Cambridge University Press. This book was released on 2021-05-13 with total page 607 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understand topics ranging from the foundations of duct acoustics to acoustic design of mufflers and silencers with this hands-on reference.
Download or read book Internal Fluid Flow written by Alfred John Ward-Smith and published by Oxford University Press, USA. This book was released on 1980 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Fluid Dynamics written by Jiyuan Tu and published by Butterworth-Heinemann. This book was released on 2012-11-07 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to CFD fundamentals and using commercial CFD software to solve engineering problems, designed for the wide variety of engineering students new to CFD, and for practicing engineers learning CFD for the first time. Combining an appropriate level of mathematical background, worked examples, computer screen shots, and step by step processes, this book walks the reader through modeling and computing, as well as interpreting CFD results. The first book in the field aimed at CFD users rather than developers. New to this edition: A more comprehensive coverage of CFD techniques including discretisation via finite element and spectral element as well as finite difference and finite volume methods and multigrid method. Coverage of different approaches to CFD grid generation in order to closely match how CFD meshing is being used in industry. Additional coverage of high-pressure fluid dynamics and meshless approach to provide a broader overview of the application areas where CFD can be used. 20% new content .
Download or read book Technical Note National Advisory Committee for Aeronautics written by United States. National Advisory Committee for Aeronautics and published by . This book was released on 1947 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book FY US Air Force Plan for Defense Research Sciences written by and published by . This book was released on 1985 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Origin of Turbulence written by Hua-Shu Dou and published by Springer Nature. This book was released on 2022-03-25 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the new discovery of the origin of turbulence from Navier–Stokes equations. The fully developed turbulence is found to be composed of singularities of flow field. The mechanisms of flow stability and turbulent transition are described using the energy gradient theory, which states all the flow instability and breakdown resulted from the gradient of the total mechanical energy normal to the flow direction. This approach is universal for flow instability in Newtonian flow and non-Newtonian flow. The theory has been used to solve several problems, such as plane and pipe Poiseuille flows, plane Couette flow, Taylor–Couette flow, flows in straight coaxial annulus, flows in curved pipes and ducts, thermal convection flow, viscoelastic flow, and magnet fluid flow, etc. The theory is in agreement with results from numerical simulations and experiments. The analytical method used in this book is novel and is different from the traditional approaches. This book includes the fundamental basics of flow stability and turbulent transition, the essentials of the energy gradient theory, and the applications of the theory to several practical problems. This book is suitable for researchers and graduate students.
Download or read book Noise Reduction Analysis written by K. Uno Ingard and published by Jones & Bartlett Learning. This book was released on 2010 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written By A Noted Authority In The Subject Area, This Book Is A Comprehensive Study Of The Theory And Practical Application Of Noise Reduction To Numerous Fields. It May Be Used As A Reference By Scientists And Engineers Or In A Senior-Undergraduate Or Graduate-Level Course. The First Six Chapters Deal With The Basic Mechanisms Of Sound Absorption By Which Acoustic Energy Is Converted Into Heat In Viscous And Thermal Boundaries In A Sound Field. The Second Part Covers Duct Attenuators With A Discussion Of How Their Performance Is Described And Measured. The Main Part Of Each Chapter Is Planned To Be Descriptive, And Contains Numerical Results That Should Be Of Direct Interest For Design Work. Mathematical Analysis Is Placed At The End Of The Chapters.
Download or read book Engineering Fluid Mechanics written by Hongqing Song and published by Springer. This book was released on 2018-05-08 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically introduces engineering fluid mechanics in a simple and understandable way, focusing on the basic concepts, principles and methods. Engineering fluid mechanics is necessary for professionals and students in fields such as civil, environmental, mechanical, and petroleum engineering. Unlike most of the current textbooks and monographs, which are too complicated and include huge numbers of math formulas and equations, this book introduces essential concepts and flow rules in a clear and elementary way that can be used in further research. In addition, it provides numerous useful tables and diagrams that can be quickly and directly checked for industry applications. Furthermore, it highlights the connection between free flow and porous flow, which can aid advanced interdisciplinary research such as nanotech and environmental science. Last but not least, each chapter presents a variety of problems to offer readers a better understanding about the principles and applications of fluid mechanics.
Download or read book Engineering Turbulence Modelling and Experiments 2 written by F. Martelli and published by Elsevier. This book was released on 2014-06-28 with total page 1012 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today understanding turbulence is one of the key issues in tackling flow problems in engineering. Powerful computers and numerical methods are now available for solving flow equations, but the simulation of turbulence effects, which are nearly always important in practice, are still at an early stage of development. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulence momentum, heat and mass transfer. The 89 papers, including 5 invited papers, in this volume present and discuss new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. The high standard of the contributions on the developing and testing of turbulent models attests to the world-wide interest this domain is currently attracting from researchers.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1948 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt:
