Download or read book Flow Field Measurements in a Counter swirl Stabilized Liquid Combustor written by Jonathan A. Colby and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: To adhere to the current requirements for NOx and CO emissions in combustion systems, modern land and air based gas turbine engines often operate in the fuel lean regime. While operating near the lean blow out (LBO) limit does reduce some harmful emissions, combustor stability is sacrificed and extinction becomes a major concern. To fully understand the characteristics of lean operation, an experimental study was conducted to map the time averaged flow field in a typical industrial, counter-swirling, liquid fuel combustor. This study examined two steady-state operating conditions, both near the lean extinction limit for this swirl burner. Using an LDV/PDPA system, 2-D mean and fluctuating velocities, as well as Reynolds stresses, were measured throughout the combustor. These measurements were taken for both the non-reacting and reacting flow fields, enabling a direct analysis of the result of heat addition and increased load on a turbulent swirling flow field. To further understand the overall flow field, liquid droplet diameter measurements were taken to determine the fuel spray characteristics as a function of operating pressure and rated spray angle. Chemical composition at the combustor exit was also measured, with an emphasis on the concentrations of both CO and NOx emissions. This large database of aerodynamic and droplet measurements improves understanding of the swirling, reacting flow field and aids in the accurate prediction of lean blow-out events. With this understanding of the lean blow-out limit, increased fuel efficiency and decreased pollutant emissions can be achieved in industrial combustors, especially those used for thrust in the airline industry.
Download or read book Flow Diagnostic of Swirl Stabilized Combustion Without and with Porous Inert Media for Mitigation of Combustion Noise and Thermo acoustic Instabilities written by Joseph Warren Meadows and published by . This book was released on 2014 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: Study of combustion dynamics has gained significant research attention since low-emission systems are increasingly employed in the industry. In particular, combustion noise and thermo-acoustic instabilities are of great importance in highly critical applications such as power generation, jet propulsion engines, and rocket propulsion systems. Recently, porous inert media (PIM), also referred to as foam insert, has shown promise in mitigating combustion noise and thermo-acoustic instabilities in lean premixed (LPM), swirl-stabilized combustion at atmospheric pressure and elevated pressures. In this study, the flow field without and with PIM is investigated to understand the underlying mechanisms responsible for mitigating thermo-acoustic instabilities. Experiments are conducted for LPM combustion and lean direct injection (LDI) combustion. First, time-resolved PIV technique is utilized to measure the non-reacting flow field without and with PIM. Although the flow field inside the annulus of the foam insert was optically inaccessible, measurements immediately downstream provide insight into the instantaneous flow field and turbulence characteristics. The study highlights the role of the foam insert on vorticity, velocity, shear layer spreading angle, recirculation zone dynamics, and turbulent kinetic energy; which ultimately affects the acoustics behavior of the combustor in a favorable manner. The effect of PIM on the dominant turbulent structures in the flow field is quantified using proper orthogonal decomposition (POD) technique. Next, flow field measurements are acquired for LPM swirl-stabilized combustion without and with PIM. The turbulent structures similar to the non-reacting flow field are also present in the reacting flow field, with notable difference in size and shape. The instantaneous and average flow fields provide insight into the effects of PIM on the velocity and turbulence fields. POD analysis is used to quantify the effect of PIM on the dominant turbulent structures, and PIM is shown to distribute the turbulent energy from the large scale structures to smaller scale structures. By harmonically reconstructing the flow field at the frequency of thermo-acoustic instability, the feedback mechanism is found to be the vortical structures in the corner recirculation zones, and PIM is shown to eliminate the feedback mechanism. The efficacy of PIM in mitigating combustion noise and thermo-acoustic instabilities is demonstrated for liquid fuel combustion utilizing the LDI concept. In this system, the flame stabilizes downstream of the dump plane due to a balance of flow velocity and flame speed of the fuel-air mixture created upstream. The ring shaped PIM is placed at the dump plane of the combustor to alter the flow field in an advantageous manner. Sound pressure levels (SPL) and CO and NOx emissions are measured for combustion without and with PIM inserts. Effect of atomizing air to liquid mass ratio on SPL suggests equivalence ratio oscillations are the driving force for thermo-acoustic instabilities. Results show that the PIM insert reduces broad band combustion noise, mitigates peak instabilities occurring at the first longitudinal mode of the natural frequency of the combustor, and facilitates thermal feedback from the flame to the fuel atomization process. Different insert geometries were examined and they all reduced SPLs, but the converging foam geometry provided the best performance. Finally, flow fields of LDI combustion are experimentally measured using time-resolved PIV technique without and with PIM. The instantaneous flow field highlights the role of PIM on the fluctuating velocity field. The driving mechanism for thermo-acoustic instability is identified by analyzing the fluctuating flow field, and PIM is found to decrease the driving force for thermo-acoustic instability. The average flow field is used to show the effect of PIM on the turbulence and POD analysis is used to quantify the effect of PIM on the turbulent structures. The study identifies spatial and temporal non-homogeneities in equivalence ratio as the feedback mechanisms for exciting thermo-acoustic instabilities in LDI swirl-stabilized combustion. In general, PIM decreases the driving force while increasing the dampening force in both LPM and LDI combustion systems.
Download or read book Coarse Grained Simulation and Turbulent Mixing written by Fenando F. Grinstein and published by Cambridge University Press. This book was released on 2016-06-30 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews our current understanding of the subject. For graduate students and researchers in computational fluid dynamics and turbulence.
Download or read book Unsteady Combustor Physics written by Tim C. Lieuwen and published by Cambridge University Press. This book was released on 2012-08-27 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developing clean, sustainable energy systems is a pre-eminent issue of our time. Most projections indicate that combustion-based energy conversion systems will continue to be the predominant approach for the majority of our energy usage. Unsteady combustor issues present the key challenge associated with the development of clean, high-efficiency combustion systems such as those used for power generation, heating or propulsion applications. This comprehensive study is unique, treating the subject in a systematic manner. Although this book focuses on unsteady combusting flows, it places particular emphasis on the system dynamics that occur at the intersection of the combustion, fluid mechanics and acoustic disciplines. Individuals with a background in fluid mechanics and combustion will find this book to be an incomparable study that synthesises these fields into a coherent understanding of the intrinsically unsteady processes in combustors.
Download or read book 41st AIAA ASME SAE ASEE Joint Propulsion Conference Exhibit 10 13 July 2005 Tucson Arizona 05 4100 05 4149 written by and published by . This book was released on 2005 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Velocity Fields in a High Pressure Liquid Fueled Swirl stabilized Lean Partially premixed Combustor written by Pankaj Saini and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis investigates thermoacoustic velocity coupling in a lean, partially-premixed, liquid fueled gas turbine combustor operating at engine relevant conditions. Temporally resolved velocity fields are calculated through stereoscopic particle image velocimetry running at 5 kHz. Low velocity data yield is typical of such high pressure flames, so a new spatio-temporal data reconstruction algorithm is developed and implemented here to aid with the analysis of the measured velocity fields. Velocity measurements from six cases are studied here: gas phase velocities from two non-reacting and two reacting flows, and liquid phase velocities (on fuel droplets) from two other reacting cases. While the acoustic fields and the fuel flux into the combustor are found to have periodic oscillations corresponding to the thermoacoustic frequency, the velocity fields do not exhibit any relevant coherent oscillations. It therefore appears that, for the combustor being studied here, the thermoacoustic oscillations are a result of the fuel flow coupling, as opposed to vortex-acoustic-flame interactions.
Download or read book Instabilities and Turbulence in Engineering Flows written by D. Ashpis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains contributions by colleagues, former students and friends of Professor Eli Reshotko in celebration of his 60th birth day. Since Professor Reshotko's scientific and engineering contribu tions have been in the areas of hydrodynamic stability, transition to turbulence, and boundary layer flows, it is only appropriate that the articles in this volume be devoted to these and related topics. The first two sections focus on instabilities and transition in sub sonic and supersonic flows, respectively. The third section deals with developing turbulence, while the the final section treats related prob lems in engineering fluid mechanics. The diversity and scope of the articles contained herein exemplify the insight and expertise required in the study of transitional and turbulent flows today - traits which also exemplify Eli Reshotko's contributions to these fields. A few of the articles in this volume were presented at a sym posium in honor of Eli Reshotko's 60th birthday, held in Newport News, Virginia, on July 28, 1991. The symposium was sponsored by lCASE, and organized by M.Y. Hussaini (lCASE) and R. Hirsh (U.S. National Science Foundation). Of those who could not attend, many chose to honor Professor Reshotko by a contribution to the volume dedicated to him. We would like to use this opportunity to express our deep ap preciation to M.Y. Hussaini for initiating this very special tribute to Eli, and to Ms. Emily Todd for her efforts in the volume preparation and in the organization of the symposium.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Flow Field Measurement of Triple Swirler Spray Combustor written by Gouqiang Li and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Liquid Particle Size Measurement Techniques 2nd Volume written by E. Dan Hirleman and published by ASTM International. This book was released on 1990 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combustion Control in Industrial Multi Swirl Stabilized Spray Combustor written by and published by . This book was released on 2005 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of this study is to investigate the emission characteristics and combustion dynamics of multiple swirl spray combustors either in premixing or non-premixed combustion (e.g. Lean Direct Injection), and correlate these combustion characteristics (emissions, combustion instability and lean flammability) to the fluids dynamics (flow structures and its evolution). This study covers measurement of velocity flow field, temperature field, and combustion under effects of various parameters, including inlet flow Reynolds number, inlet air temperature, swirl configurations, downstream exhaust nozzle contraction ratios, length of mixing tube. Knowledge obtained through this comprehensive study is applied to passive and active controls for improving gas turbine combustion performance in the aid of novel sensor and actuator technologies.
Download or read book AIAA SAE ASME ASEE 27th Joint Propulsion Conference 91 2320 91 2396 written by and published by . This book was released on 1991 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combustion Measurements written by Norman Chigier and published by CRC Press. This book was released on 1991-04-01 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book begins with an introduction to the general problems of making measurements in high temperature and a presentation of chemically reacting flow systems. It describes each instrument with the various diagnostic techniques and discusses measurements that have been made in furnaces, flames, and rocket engines. The detailed measurement techniques described in this book cover a wide spectrum of applications in combustion systems, including gas turbine, rocket measurement techniques that were developed in laboratories. Information obtained on detailed temperature, velocity, particle size, and gas concentration distribution is leading to improve understanding of the chemical combustion process and to design imporvements in combustors.
Download or read book Combustion written by J. Warnatz and published by Springer Science & Business Media. This book was released on 2006-09-23 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a rigorous treatment of the coupling of chemical reactions and fluid flow. Combustion-specific topics of chemistry and fluid mechanics are considered and tools described for the simulation of combustion processes. This edition is completely restructured. Mathematical Formulae and derivations as well as the space-consuming reaction mechanisms have been replaced from the text to appendix. A new chapter discusses the impact of combustion processes on the atmosphere, the chapter on auto-ignition is extended to combustion in Otto- and Diesel-engines, and the chapters on heterogeneous combustion and on soot formation are heavily revised.
Download or read book 93 1752 93 1799 written by and published by . This book was released on 1992 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Temperature and Species Concentration Measurements in a Swirl stabilizer Combustor written by Mark Joseph Oven and published by . This book was released on 1979 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental Study of a Vortex Breakdown Stabilized Combustor written by F. C. Gouldin and published by . This book was released on 1975 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
