Download or read book Flow Deformation and Fracture written by Grigory Isaakovich Barenblatt and published by Cambridge University Press. This book was released on 2014-06-05 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over forty years of teaching experience are distilled into this text. The guiding principle is the wide use of the concept of intermediate asymptotics, which enables the natural introduction of the modeling of real bodies by continua. Beginning with a detailed explanation of the continuum approximation for the mathematical modeling of the motion and equilibrium of real bodies, the author continues with a general survey of the necessary methods and tools for analyzing models. Next, specific idealized approximations are presented, including ideal incompressible fluids, elastic bodies and Newtonian viscous fluids. The author not only presents general concepts but also devotes chapters to examining significant problems, including turbulence, wave-propagation, defects and cracks, fatigue and fracture. Each of these applications reveals essential information about the particular approximation. The author's tried and tested approach reveals insights that will be valued by every teacher and student of mechanics.
Download or read book Rock Fractures and Fluid Flow written by National Research Council and published by National Academies Press. This book was released on 1996-08-27 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific understanding of fluid flow in rock fracturesâ€"a process underlying contemporary earth science problems from the search for petroleum to the controversy over nuclear waste storageâ€"has grown significantly in the past 20 years. This volume presents a comprehensive report on the state of the field, with an interdisciplinary viewpoint, case studies of fracture sites, illustrations, conclusions, and research recommendations. The book addresses these questions: How can fractures that are significant hydraulic conductors be identified, located, and characterized? How do flow and transport occur in fracture systems? How can changes in fracture systems be predicted and controlled? Among other topics, the committee provides a geomechanical understanding of fracture formation, reviews methods for detecting subsurface fractures, and looks at the use of hydraulic and tracer tests to investigate fluid flow. The volume examines the state of conceptual and mathematical modeling, and it provides a useful framework for understanding the complexity of fracture changes that occur during fluid pumping and other engineering practices. With a practical and multidisciplinary outlook, this volume will be welcomed by geologists, petroleum geologists, geoengineers, geophysicists, hydrologists, researchers, educators and students in these fields, and public officials involved in geological projects.
Download or read book Rock Fractures and Fluid Flow written by Committee on Fracture Characterization and Fluid Flow and published by National Academies Press. This book was released on 1996-09-10 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific understanding of fluid flow in rock fractures--a process underlying contemporary earth science problems from the search for petroleum to the controversy over nuclear waste storage--has grown significantly in the past 20 years. This volume presents a comprehensive report on the state of the field, with an interdisciplinary viewpoint, case studies of fracture sites, illustrations, conclusions, and research recommendations. The book addresses these questions: How can fractures that are significant hydraulic conductors be identified, located, and characterized? How do flow and transport occur in fracture systems? How can changes in fracture systems be predicted and controlled? Among other topics, the committee provides a geomechanical understanding of fracture formation, reviews methods for detecting subsurface fractures, and looks at the use of hydraulic and tracer tests to investigate fluid flow. The volume examines the state of conceptual and mathematical modeling, and it provides a useful framework for understanding the complexity of fracture changes that occur during fluid pumping and other engineering practices. With a practical and multidisciplinary outlook, this volume will be welcomed by geologists, petroleum geologists, geoengineers, geophysicists, hydrologists, researchers, educators and students in these fields, and public officials involved in geological projects.
Download or read book The Physics of Deformation and Fracture of Polymers written by A. S. Argon and published by Cambridge University Press. This book was released on 2013-03-07 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: A physical, mechanism-based presentation of the plasticity and fracture of polymers, covering industrial scale applications through to nanoscale biofluidic devices.
Download or read book Plastic Flow and Fracture in Solids by Tracy Y Thomas written by and published by Elsevier. This book was released on 1961-01-01 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, we study theoretical and practical aspects of computing methods for mathematical modelling of nonlinear systems. A number of computing techniques are considered, such as methods of operator approximation with any given accuracy; operator interpolation techniques including a non-Lagrange interpolation; methods of system representation subject to constraints associated with concepts of causality, memory and stationarity; methods of system representation with an accuracy that is the best within a given class of models; methods of covariance matrix estimation; methods for low-rank matrix approximations; hybrid methods based on a combination of iterative procedures and best operator approximation; and methods for information compression and filtering under condition that a filter model should satisfy restrictions associated with causality and different types of memory. As a result, the book represents a blend of new methods in general computational analysis, and specific, but also generic, techniques for study of systems theory ant its particular branches, such as optimal filtering and information compression. - Best operator approximation, - Non-Lagrange interpolation, - Generic Karhunen-Loeve transform - Generalised low-rank matrix approximation - Optimal data compression - Optimal nonlinear filtering
Download or read book Deformation and Fracture Mechanics of Engineering Materials written by Richard W. Hertzberg and published by . This book was released on 1996 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition comprehensively updates the field of fracture mechanics by including details of the latest research programmes. It contains new material on non-metals, design issues and statistical aspects. The application of fracture mechanics to different types of materials is stressed.
Download or read book Numerical Modelling and Analysis of Fluid Flow and Deformation of Fractured Rock Masses written by Xing Zhang and published by Elsevier. This book was released on 2002-05-14 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our understanding of the subsurface system of the earth is becoming increasingly more sophisticated both at the level of the behaviour of its components (solid, liquid and gas) as well as their variations in space and time. The implementation of coupled models is essential for the understanding of an increasing number of natural phenomena and in predicting human impact on these. The growing interest in the relation between fluid flow and deformation in subsurface rock systems that characterise the upper crust has led to increasingly specialized knowledge in many branches of earth sciences and engineering. A multidisciplinary subject dealing with deformation and fluid flow in the subsurface system is emerging. While research in the subject area of faulting, fracturing and fluid flow has led to significant progress in many different areas, the approach has tended to be "reductionist", i.e. involving the isolation and simplification of phenomena so that they may be treated as single physical processes. The reality is that many processes operate together within subsurface systems, and this is particularly true for fluid flow and deformation of fractured rock masses. The aim of this book is to begin to explore how advances in numerical modelling can be applied to understanding the complex phenomena observed in such systems. Although mainly based on original research, the book also includes the fundamental principles and practical methods of numerical modelling, in particular distinct element methods. This volume explores the principles of numerical modelling and the methodologies for some of the most important problems, in addition to providing practical models with detailed discussions on various topics.
Download or read book Elasticity Fracture and Flow written by J. C. Jaeger and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: IN this monograph I have attempted to set out, in as elemen tary a form as possible, the basic mathematics of the theories of elasticity, plasticity, viscosity, and rheology, together with a discussion of the properties of the materials involved and the way in which they are idealized to form a basis for the mathe matical theory. There are many mathematical text-books on these subjects, but they are largely devoted to methods for the solution of special problems, and, while the present book may be regarded as an introduction to these, it is also in tended for the large class of readers such as engineers and geologists who are more interested in the detailed analysis of stress and strain, the properties of some of the materials they use, criteria for flow and fracture, and so on, and whose interest in the theory is rather in the assumptions involved in it and the way in which they affect the solutions than in the study of special problems. The first chapter develops the analysis of stress and strain rather fully, giving, in particular, an account of Mohr's repre sentations of stress and of finite homogeneous strain in three dimensions. In the second chapter, on the behaviour of materials, the stress-strain relations for elasticity (both for isotropic and simple anisotropic substances), viscosity, plas ticity and some of the simpler rheological models are described.
Download or read book Mechanisms of Deformation and Fracture written by K. E. Easterling and published by Elsevier. This book was released on 2013-10-22 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanisms of Deformation and Fracture contains the proceedings of the Interdisciplinary Conference on the Mechanisms of Deformation and Fracture held at the University of Luleå in Sweden on September 20-22, 1978. The papers explore the mechanisms underlying deformation and fracture of materials such as pearlite, metals, quartz, soils, and rocks. Results of theoretical and experimental studies on topics ranging from electromagnetic detection of low-cycle fatigue to stress and strain distribution in two-phase systems are presented. This book is comprised of 37 chapters and begins with a discussion on the interrelationships among solid mechanics, earth sciences, and material sciences. Subsequent chapters focus on the low-cycle behavior of case hardened steel; deformation and shear of normally consolidated flocculated kaolin; analytical modeling in inelasticity; creep mechanisms in clay; and initiation of crack growth at full plasticity. Plastic flow mechanisms and the rheological properties of the Earth's mantle are also examined, along with the fracture of glassy thermoplastics. The final chapter presents a thermodynamic model of consolidation in cohesive soils. This monograph will be a valuable resource for students and practitioners of mechanical engineering, metallurgy, materials science, and earth sciences.
Download or read book Discrete Fracture Network Modeling of Hydraulic Stimulation written by Mark W. McClure and published by Springer Science & Business Media. This book was released on 2013-06-15 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discrete Fracture Network Modeling of Hydraulic Stimulation describes the development and testing of a model that couples fluid-flow, deformation, friction weakening, and permeability evolution in large, complex two-dimensional discrete fracture networks. The model can be used to explore the behavior of hydraulic stimulation in settings where matrix permeability is low and preexisting fractures play an important role, such as Enhanced Geothermal Systems and gas shale. Used also to describe pure shear stimulation, mixed-mechanism stimulation, or pure opening-mode stimulation. A variety of novel techniques to ensure efficiency and realistic model behavior are implemented, and tested. The simulation methodology can also be used as an efficient method for directly solving quasistatic fracture contact problems. Results show how stresses induced by fracture deformation during stimulation directly impact the mechanism of propagation and the resulting fracture network.
Download or read book Theory of Flow and Fracture of Solids written by Arpád Nádai and published by . This book was released on 1950 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Physics of Deformation and Flow written by Ernest William Billington and published by . This book was released on 1981 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Studies in Large Plastic Flow and Fracture written by Percy Williams Bridgman and published by Cambridge : Harvard University Press. This book was released on 1964 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Physics of Deformation and Fracture of Polymers written by A. S. Argon and published by Cambridge University Press. This book was released on 2013-03-07 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: Demonstrating through examples, this book presents a mechanism-based perspective on the broad range of deformation and fracture response of solid polymers. It draws on the results of probing experiments and considers the similar mechanical responses of amorphous metals and inorganic compounds to develop advanced methodology for generating more precise forms of modelling. This, in turn, provides a better fundamental understanding of deformation and fracture phenomena in solid polymers. Such mechanism-based constitutive response forms have far-reaching application potential in the prediction of structural responses and in tailoring special microstructures for tough behaviour. Moreover, they can guide the development of computational codes for deformation processing of polymers at any level. Applications are wide-ranging, from large strain industrial deformation texturing to production of precision micro-fluidic devices, making this book of interest to both advanced graduate students and to practising professionals.
Download or read book Deformation and Fracture of Solid State Materials written by Sanichiro Yoshida and published by Springer. This book was released on 2014-11-17 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume introduces a comprehensive theory of deformation and fracture to engineers and applied scientists. Here “comprehensive” means that the theory can describe all stages of deformation from elastic to plastic and plastic to fracturing stage on the same basis (equations). The comprehensive approach is possible because the theory is based on a fundamental physical principle called the local symmetry, or gauge invariance, as opposed to phenomenology. Professor Yoshida explains the gist of local symmetry (gauge invariance) intuitively so that engineers and applied physicists can digest it easily, rather than describing physical or mathematical details of the principle. The author also describes applications of the theory to practical engineering, such as nondestructive testing in particular, with the use of an optical interferometric technique called ESPI (Electronic Speckle-Pattern Interferometry).The book is not a manual of applications. Instead, it provides information on how to apply physical concepts to engineering applications.
Download or read book Fluid Flow in Fractured Rocks written by Robert W. Zimmerman and published by John Wiley & Sons. This book was released on 2023-12-19 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: FLUID FLOW IN FRACTURED ROCKS "The definitive treatise on the subject for many years to come" (Prof. Ruben Juanes, MIT) Authoritative textbook that provides a comprehensive and up-to-date introduction to fluid flow in fractured rocks Fluid Flow in Fractured Rocks provides an authoritative introduction to the topic of fluid flow through single rock fractures and fractured rock masses. This book is intended for readers with interests in hydrogeology, hydrology, water resources, structural geology, reservoir engineering, underground waste disposal, or other fields that involve the flow of fluids through fractured rock masses. Classical and established models and data are presented and carefully explained, and recent computational methodologies and results are also covered. Each chapter includes numerous graphs, schematic diagrams and field photographs, an extensive reference list, and a set of problems, thus providing a comprehensive learning experience that is both mathematically rigorous and accessible. Written by two internationally recognized leaders in the field, Fluid Flow in Fractured Rocks includes information on: Nucleation and growth of fractures in rock, with a multiscale characterization of their geometric traits Effect of normal and shear stresses on the transmissivity of a rock fracture and mathematics of fluid flow through a single rock fracture Solute transport in rocks, with quantitative descriptions of advection, molecular diffusion, and dispersion Fluid Flow in Fractured Rocks is an essential resource for researchers and postgraduate students who are interested in the field of fluid flow through fractured rocks. The text is also highly suitable for professionals working in civil, environmental, and petroleum engineering.
Download or read book Discrete Fracture Network Modeling of Hydraulic Stimulation written by Mark McClure and published by Springer. This book was released on 2013-06-19 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discrete Fracture Network Modeling of Hydraulic Stimulation describes the development and testing of a model that couples fluid-flow, deformation, friction weakening, and permeability evolution in large, complex two-dimensional discrete fracture networks. The model can be used to explore the behavior of hydraulic stimulation in settings where matrix permeability is low and preexisting fractures play an important role, such as Enhanced Geothermal Systems and gas shale. Used also to describe pure shear stimulation, mixed-mechanism stimulation, or pure opening-mode stimulation. A variety of novel techniques to ensure efficiency and realistic model behavior are implemented, and tested. The simulation methodology can also be used as an efficient method for directly solving quasistatic fracture contact problems. Results show how stresses induced by fracture deformation during stimulation directly impact the mechanism of propagation and the resulting fracture network.
