Download or read book Flow Boiling of a Dilute Emulsion In Smooth and Rough Microgaps written by Brandon M. Shadakofsky and published by Springer Nature. This book was released on 2023-03-24 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book elucidates heat transfer behavior for boiling of dilute emulsions- mixtures of two immiscible fluids- which has received little attention to date. Of the work completed in this area, the majority has been focused on pool boiling where no mean flow is present, and this book is the first major work to be published regarding flow boiling of emulsions. The book includes a comprehensive review and assessment of research on emulsion-based heat transfer. Recent experiments are reported and analyzed to characterize heat transfer in microgap flow boiling via a systematic investigation into the effects of gap size, mass flux, and volume fraction on the heat transfer coefficient and pressure drop. The emulsion used in all experiments comprises droplets of an immiscible electronics cooling fluid suspended in water. The volume provides a complete baseline for flow boiling of water in the microgaps, enabling a determination of the enhancement of the heat transfer coefficient when the disperse component is present. Moreover, a subset of the data set pertains to flow boiling of dilute emulsions over microporous surfaces. The flow conditions for which the microporous surfaces enhance or degrade heat transfer are presented. Finally, this book provides a discussion of the physical phenomena which affect boiling and a set of nondimensional numbers that can be used for correlation.
Download or read book Helium Cryogenics written by Steven W. Van Sciver and published by Springer Science & Business Media. This book was released on 2012-02-10 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twenty five years have elapsed since the original publication of Helium Cryogenics. During this time, a considerable amount of research and development involving helium fluids has been carried out culminating in several large-scale projects. Furthermore, the field has matured through these efforts so that there is now a broad engineering base to assist the development of future projects. Helium Cryogenics, 2nd edition brings these advances in helium cryogenics together in an updated form. As in the original edition, the author's approach is to survey the field of cryogenics with emphasis on helium fluids. This approach is more specialized and fundamental than that contained in other cryogenics books, which treat the associated range of cryogenic fluids. As a result, the level of treatment is more advanced and assumes a certain knowledge of fundamental engineering and physics principles, including some quantum mechanics. The goal throughout the work is to bridge the gap between the physics and engineering aspects of helium fluids to provide a source for engineers and scientists to enhance their usefulness in low-temperature systems. Dr. Van Sciver is a Distinguished Research Professor and John H. Gorrie Professor of Mechanical Engineering at Florida State University. He is also a Program Director at the National High Magnetic Field Laboratory (NHMFL). Dr. Van Sciver joined the FAMU-FSU College of Engineering and the NHMFL in 1991, initiating and teaching a graduate program in magnet and materials engineering and in cryogenic thermal sciences and heat transfer. He also led the NHMFL development efforts of the cryogenic systems for the NHMFL Hybrid and 900 MHz NMR superconducting magnets. Between 1997 and 2003, he served as Director of Magnet Science and Technology at the NHMFL. Dr. Van Sciver is a Fellow of the ASME and the Cryogenic Society of America and American Editor for the journal Cryogenics. He is the 2010 recipient of the Kurt Mendelssohn Award. Prior to joining Florida State University, Dr. Van Sciver was Research Scientist and then Professor of Nuclear Engineering, Engineering Physics and Mechanical Engineering at the University of Wisconsin-Madison from 1976 to 1991. During that time he also served as the Associate Director of the Applied Superconductivity Center. Dr. Van Sciver received his PhD in Low Temperature Physics from the University of Washington-Seattle in 1976. He received his BS degree in Engineering Physics from Lehigh University in 1970. Dr. Van Sciver is author of over 200 publications and patents in low temperature physics, liquid helium technology, cryogenic engineering and magnet technology. The first edition of Helium Cryogenics was published by Plenum Press (1986). The present work is an update and expansion of that original project.
Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies
Download or read book Electronics Cooling written by S. M. Sohel Murshed and published by BoD – Books on Demand. This book was released on 2016-06-15 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring contributions from the renowned researchers and academicians in the field, this book covers key conventional and emerging cooling techniques and coolants for electronics cooling. It includes following thematic topics: - Cooling approaches and coolants - Boiling and phase change-based technologies - Heat pipes-based cooling - Microchannels cooling systems - Heat loop cooling technology - Nanofluids as coolants - Theoretical development for the junction temperature of package chips. This book is intended to be a reference source and guide to researchers, engineers, postgraduate students, and academicians in the fields of thermal management and cooling technologies as well as for people in the electronics and semiconductors industries.
Download or read book Proceedings of the International Petroleum and Petrochemical Technology Conference 2019 written by Jia'en Lin and published by Springer Nature. This book was released on 2019-12-16 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of selected papers from the 3rd International Petroleum and Petrochemical Technology Conference (IPPTC 2019). The work focuses on petroleum & petrochemical technologies and practical challenges in the field. It creates a platform to bridge the knowledge gap between China and the world. The conference not only provides a platform to exchanges experience but also promotes the development of scientific research in petroleum & petrochemical technologies. The book will benefit a broad readership, including industry experts, researchers, educators, senior engineers and managers.
Download or read book Agricultural Biomass Based Potential Materials written by Khalid Rehman Hakeem and published by Springer. This book was released on 2015-04-01 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Agricultural biomass is abundant worldwide and it can be considered as alternative source of renewable and sustainable materials which can be used as potential materials for different applications. Despite this enormous production of agricultural biomass, only a small fraction of the total biomass is utilized for different applications. Industry must be prepared to take advantage of the situation and utilize the available biomass in the best possible manner. Agricultural biomass such as natural fibres has been successfully investigated as a great potential to be used as a renewable and sustainable materials for the production of composite materials. Natural fibres offer excellent specific properties and have potential as outstanding reinforcing fillers in the matrix and can be used as an alternative material for biocomposites, hybrid composites, pulp, and paper industries. Natural fibre based polymer composites made of jute, oil palm, flex, hemp, kenaf have a low market cost, attractive with respect to global sustainability and find increasing commercial use in different applications. Agricultural biomass based composites find applications in a number of fields viz., automotive industry and construction industry. Future research on agricultural biomass-natural fibre based composites should not only be limited to its automotive applications but can be explored for its application in aircraft components, construction industry, rural housing and biomedical applications. In this book we will cover the chemical, physical, thermal, electrical, and biodegradability properties of agricultural biomass based composite materials and its different potential applications. The main goal of this volume is to familiarize researchers, scientists and engineers with the unique research opportunities and potentials of agricultural biomass based materials. Up-to-date information on alternative biomass utilization Academic and industry leaders discuss unique properties of biomass based composite materials Direct application of agricultural biomass materials as sustainable and renewable alternatives
Download or read book Sustainability in the Textile and Apparel Industries written by Subramanian Senthilkannan Muthu and published by Springer Nature. This book was released on 2020-03-31 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is part of a five-volume set that explores sustainability in textile industry practices globally. Case studies are provided that cover the theoretical and practical implications of sustainable textile issues, including environmental footprints of textile manufacturing, consumer behavior, eco-design in clothing and apparels, supply chain sustainability, the chemistry of textile manufacturing, waste management and textile economics. The set will be of interest to researchers, engineers, industrialists, R&D managers and students working in textile chemistry, economics, materials science, and sustainable consumption and production. This volume explores some alternative synthetic raw materials resulting from the recycling and regeneration of renewable textile fibers, and how these sustainable green-based composites can contribute to improved ecological and human health. The book offers insights into the impacts of human-made fibers and microfiber pollution, and how biodegradable material sourcing can help to curb harmful environmental impacts from these practices and achieve clothing and apparel sustainability.
Download or read book Electrical Discharge Machining EDM written by M. P. Jahan and published by Nova Science Publishers. This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical Discharge Machining (EDM) is one of the earliest and most widely used non-conventional machining processes. In recent years, the use of EDM has increased significantly in industries, mainly due to the extensive use of hard and difficult-to-cut materials, i.e. hardened steels, carbides, titanium alloys, nickel super alloys and so on. The EDM process is being used extensively for many important applications in die and mold, aerospace, automotive, micro-electronic and biomedical industries. As a result, extensive research has been carried out on various aspects of EDM. Taking those facts into consideration, this book aims to provide a comprehensive overview of the various types, technologies and applications of EDM. The book starts with chapters on the two major types of EDM: die-sinking EDM and wire-EDM. Subsequently, several EDM-based hybrid machining processes, such as: ultrasonically aided EDM, powder-mixed EDM, and simultanous micro-EDM/ECM have been discussed in detail. This book includes chapters on the detail of EDM surface and modeling and simulation of the EDM process. This book also contains chapters on the novel and innovative applications of EDM as well as machining of newer materials, such as: shape memory alloy, reaction-bonded silicon carbide, metal metrix composites, silicon based semiconductors, and non-conducting polymers. It is a useful resource for students and researchers who are planning to start their research on the area of EDM and related processes. It can also serve as a reference for students, academics, researchers, engineers, and working professionals in non-traditional manufacturing processes related industries.
Download or read book Fabric for Fashion The Complete Guide written by Amanda Johnston and published by Laurence King Publishing. This book was released on 2014-02-03 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fabric for Fashion: The Complete Guide is the only book specifically for fashion designers to explain the behaviour and properties of different fabrics. Fashion design is largely determined by how the fabrics work, move, feel and look. The most successful fashion designers are those who understand their materials, who match design skill with technical knowledge. This book bridges that gap by providing a mix of practical information and industry vocabulary, visually examining generic fabric types, discussing the characteristics of fabrics and showing how to exploit materials to push the boundaries of design. With stunning colour photographs that show how fashion designers, both past and present, have worked with fabrics, the book’s prime objective is to stimulate creative exploration of the relationship of fabrics to fashion.
Download or read book Modelling Diesel Combustion written by P. A. Lakshminarayanan and published by Springer Science & Business Media. This book was released on 2010-03-03 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phenomenology of Diesel Combustion and Modeling Diesel is the most efficient combustion engine today and it plays an important role in transport of goods and passengers on land and on high seas. The emissions must be controlled as stipulated by the society without sacrificing the legendary fuel economy of the diesel engines. These important drivers caused innovations in diesel engineering like re-entrant combustion chambers in the piston, lower swirl support and high pressure injection, in turn reducing the ignition delay and hence the nitric oxides. The limits on emissions are being continually reduced. The- fore, the required accuracy of the models to predict the emissions and efficiency of the engines is high. The phenomenological combustion models based on physical and chemical description of the processes in the engine are practical to describe diesel engine combustion and to carry out parametric studies. This is because the injection process, which can be relatively well predicted, has the dominant effect on mixture formation and subsequent course of combustion. The need for improving these models by incorporating new developments in engine designs is explained in Chapter 2. With “model based control programs” used in the Electronic Control Units of the engines, phenomenological models are assuming more importance now because the detailed CFD based models are too slow to be handled by the Electronic Control Units. Experimental work is necessary to develop the basic understanding of the pr- esses.
Download or read book Additive Subtractive and Hybrid Technologies written by Chander Prakash and published by Springer. This book was released on 2023-05-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with the comprehensive insights of the recent research breakthroughs in additive, subtractive, and hybrid technologies. Further, the book examines incomparable design and manufacturing independences, as well as strategies to upgrade the product performance characteristics through collaborating additive and subtractive technologies. Indeed, the intrinsic benefits and limitations of both additive and subtractive manufacturing technologies could be merged to obtain appreciable hybridizations. The editorial team members and contributors to Additive, Subtractive, and Hybrid Technologies are highly motivated experts committed to and the advance of hybrid manufacturing technologies.
Download or read book Single and Two Phase Flow Pressure Drop and Heat Transfer in Tubes written by Afshin J. Ghajar and published by Springer Nature. This book was released on 2022-01-11 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides design engineers an elemental understanding of the variables that influence pressure drop and heat transfer in plain and micro-fin tubes to thermal systems using liquid single-phase flow in different industrial applications. It also provides design engineers using gas-liquid, two-phase flow in different industrial applications the necessary fundamentals of the two-phase flow variables. The author and his colleagues were the first to determine experimentally the very important relationship between inlet geometry and transition. On the basis of their results, they developed practical and easy to use correlations for the isothermal and non-isothermal friction factor (pressure drop) and heat transfer coefficient (Nusselt number) in the transition region as well as the laminar and turbulent flow regions for different inlet configurations and fin geometry. This work presented herein provides the thermal systems design engineer the necessary design tools. The author further presents a succinct review of the flow patterns, void fraction, pressure drop and non-boiling heat transfer phenomenon and recommends some of the well scrutinized modeling techniques.
Download or read book Natural Zeolites written by G. Gottardi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zeolites form a family of minerals which have been known since the 18th century, but they remained a curiosity for scientists and collectors until 60 years ago, when their unique physicochemical properties attracted the attention of many researchers. In the past 30 years there has been an ex traordinary development in zeolite science; six International Conferences on Zeolites have been held every 3 years since 1967, and a large number of interesting contributions have been published in their proceedings. Many books, written either by individual authors or by several authors under a leading editor, have been published on these interesting silicate phases, but none has been devoted specifically to natural zeolites, even though this theme may be of interest not only to earth scientists, but also to chemists, as the in formation obtained from natural samples completes and in tegrates the characterization of many zeolites. We are trying to fill this gap on the basis of 20 years of research on natural zeolites, which we performed at the University of Modena together with many friends and colleagues. If it is in general difficult to write a scientific book with out upsetting somebody, this is particularly true for a book on natural crystals, because mineralogy is an interdisciplin ary science which covers some fields of physics, chemistry, it is almost impossible to meet every petrology, geology, and requirement.
Download or read book Adhesion in Biological Systems written by Richard Manly and published by Elsevier. This book was released on 2012-12-02 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adhesion in Biological Systems summarizes the knowledge of adhesion in the presence of moisture, a condition required in almost all biological systems. Organized into four parts with a total of 17 chapters, this book begins with the principles of adhesion in biological systems. Then, it describes the various biological adhesives, as well as the adhesives for soft and hard tissues. Scientists in a number of fields, including physics, chemistry, zoology, botany, engineering, medicine, and pharmacy, will benefit from this book.
Download or read book Adhesive Restorative Dental Materials written by D. L. Venezky and published by . This book was released on 1965 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new adhesive restorative dental material must meet rigid requirements. These must be kept in mind in screening inorganic polymer systems reported in the literature; but since the available literature data are limited, only three requirements-toxicity, chemical stability, and ease of manipulation-were used in this evaluation. The problem was approached by considering polymers according to the group number of the elements contained in the polymer backbone. The inorganic polymers were in turn grouped into three classes: Class 1, polymers having only one element in the polymer backbone; Class 2, polymers having two different elements in the backbone; and Class 3, polymers having three or more different elements in the backbone. Inorganic polymer systems which appear most promising for use as dental materials are the Class 2 polymers containing linear silicon-oxygen backbones and Class 2 polymers containing boron-phosphorus or phosphorusnitrogen ring systems as moieties in the backbone. (Author).
Download or read book Surface Chemistry and Dental Integuments written by Andrew Lasslo and published by Charles C. Thomas Publisher. This book was released on 1973 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fabric for Fashion written by Clive Hallett and published by Laurence King. This book was released on 2021-11-15 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: