Download or read book Flow and Rheology in Polymer Composites Manufacturing written by S.G. Advani and published by Elsevier Science. This book was released on 1994-02-17 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is aimed at scientists and practicing engineers who are currently exploring or would like to explore the complexity of fabrication processes of polymer composites. It deals with the mechanics and modeling aspects of discontinuous and continuous fiber composites and familarizes the engineer with the critical and fundamental issues of material processing and transport phenomena in polymeric composites and their applications in modeling and simulating specific composite manufacturing processes. Divided into three parts, Part A deals with the deformation science or rheology of these filled materials. It clearly shows the need to characterize their flow behavior before one can draw any conclusions about its processibility during manufacturing. Part B focuses on development of constitutive equations to describe the flow and deformation behavior of such materials under external processing conditions. Part C discusses the mathematical models for selected composite processes and their implementation into a computer simulation to analyze the process behavior. The processes represented in Part C cover a cross-section of important manufacturing processes and maintain a balance between processes that use short fibers and continuous fibrous materials.

Download or read book Composites Engineering Handbook written by P.K. Mallick and published by CRC Press. This book was released on 1997-03-19 with total page 1270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers information on the fundamental principles, processes, methods and procedures related to fibre-reinforced composites. The book presents a comparative view, and provides design properties of polymeric, metal, ceramic and cement matrix composites. It also gives current test methods, joining techniques and design methodologies.

Download or read book Process Modeling in Composites Manufacturing written by Suresh G. Advani and published by CRC Press. This book was released on 2002-08-28 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a wealth of literature on modeling and simulation of polymer composite manufacturing processes. However, existing books neglect to provide a systematic explanation of how to formulate and apply science-based models in polymer composite manufacturing processes. Process Modeling in Composites Manufacturing, Second Edition provides tangible methods to optimize this process — and it remains a proven, powerful introduction to the basic principles of fluid mechanics and heat transfer. Includes tools to develop an experience base to aid in modeling a composite manufacturing process Building on past developments, this new book updates the previous edition’s coverage of process physics and the state of modeling in the field. Exploring research derived from experience, intuition, and trial and error, the authors illustrate a state-of-the-art understanding of mass, momentum, and energy transfer during composites processing. They introduce computer-based solutions using MATLAB® code and flow simulation-based analysis, which complement closed-form solutions discussed in the book, to help readers understand the role of different material, geometric, and process parameters. This self-contained primer provides an introduction to modeling of composite manufacturing processes for anyone working in material science and engineering, industrial, mechanical, and chemical engineering. It introduces a scientific basis for manufacturing, using solved example problems which employ calculations provided in the book. End-of-chapter questions and problems and fill in the blanks sections reinforce the content in order to develop the experience base of the manufacturing, materials, and design engineer or scientists, as well as seniors and first-year graduate students.

Download or read book Flow and Rheology in Polymer Composites Manufacturing written by Suresh G. Advani and published by . This book was released on 1994 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deals with the mechanics and modelling aspects of discontinuous and continuous fibre composites, and familiarizes engineers with the critical and fundamental issues of material processing and transport phenomena in polymeric composites and their applications in modelling.

Download or read book Polymer and Composite Rheology written by Rakesh K. Gupta and published by CRC Press. This book was released on 2000-06-14 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: An analysis of polymer and composite rheology. This second edition covers flow properties of thermoplastic and thermoset polymers, and general principles and applications of all phases of polymer rheology, with new chapters on the rheology of particulate and fibre composites. It also includes new and expanded detail on polymer blends and emulsions, foams, reacting systems, and flow through porous media as well as composite processing operations.

Download or read book Rheology of Filled Polymer Systems written by A.V. Shenoy and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymerie materials have been replacing other conventional materials like metals, glass and wood in a number of applications. The use of various types of fillers incorporated into the polymer has become quite common as a means of reducing cost and to impart certain desirable mechanieal, thermal, electrieal and magnetic properties to the polymers. Oue to the energy crisis and high priees of petrochemieals, there has been a greater demand to use more and more fillers to cheapen the polymerie materials while maintaining and/or improving their properties. The advantages that filled polymer systems have to offer are normally offset to some extent by the increased complexity in the rheological behavior that is introduced by the inclusion of the fillers. Usually when the use of fillers is considered, a compromise has to be made between the improved mechanieal properties in the solid state, the increased difficulty in melt processing, the problem of achieving uniform dispersion of the filler in the polymer matrix and the economics of the process due to the added step of compounding. It has been recognized that addition of filler to the polymer brings a change in processing behavior. The presence of the filler increases the melt viscosity leading to increases in the pressure drop across the die but gives rise to less die swell due to decreased melt elasticity.

Download or read book Advances in the Flow and Rheology of Non Newtonian Fluids written by D.A. Siginer and published by Elsevier. This book was released on 1999-05-07 with total page 895 pages. Available in PDF, EPUB and Kindle. Book excerpt: These two volumes contain chapters written by experts in such areas as bio and food rheology, polymer rheology, flow of suspensions, flow in porous media, electrorheological fluids, etc. Computational as well as analytical mathematical descriptions, involving appropriate constitutive equations deal with complex flow situations of industrial importance. This work is unique in that it brings together state of the art reviews and recent advances in a variety of areas, involving viscoelastic materials, in a desirable and timely manner.

Download or read book Polymers and Composites Manufacturing written by Kaushik Kumar and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-02-24 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume reviews a wide range of processing methods which are currently being used for plastics and composites. Special focus lies on advancements in automation, in development of machines and new software for modeling, new materials for ease in manufacturing and strategies to increase productivity

Download or read book Manufacturing of Polymer Composites written by B. Tomas Astrom and published by Routledge. This book was released on 2018-04-27 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: The potential application areas for polymer composites are vast. While techniques and methodologies for composites design are relatively well established, the knowledge and understanding of post-design issues lag far behind. This leads to designs and eventually composites with disappointing properties and unnecessarily high cost, thus impeding a wider industrial acceptance of polymer composites. Manufacturing of Polymer Composites completely covers pre- and post-design issues. While the book enables students to become fully comfortable with composites as a possible materials choice, it also provides sufficient knowledge about manufacturing-related issues to permit them to avoid common pitfalls and unmanufacturable designs. The book is a fully comprehensive text covering all commercially significant materials and manufacturing techniques while at the same time discussing areas of research and development that are nearing commercial reality.

Download or read book Rheological Fundamentals of Polymer Processing written by J.A. Covas and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experts in rheology and polymer processing present up-to-date, fundamental and applied information on the rheological properties of polymers, in particular those relevant to processing, contributing to the physical understanding and the mathematical modelling of polymer processing sequences. Basic concepts of non-Newtonian fluid mechanics, micro-rheological modelling and constitutive modelling are reviewed, and rheological measurements are described. Topics with practical relevance are debated, such as linear viscoelasticity, converging and diverging flows, and the rheology of multiphase systems. Approximation methods are discussed for the computer modelling of polymer melt flow. Subsequently, polymer processing technologies are studied from both simulation and engineering perspectives. Mixing, crystallization and reactive processing aspects are also included. Audience: An integrated and complete view of polymer processing and rheology, important to institutions and individuals engaged in the characterisation, testing, compounding, modification and processing of polymeric materials. Can also support academic polymer processing engineering programs.

Download or read book Manufacturing of Polymer Composites written by B. Tomas Astrom and published by Routledge. This book was released on 2018-04-27 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: The potential application areas for polymer composites are vast. While techniques and methodologies for composites design are relatively well established, the knowledge and understanding of post-design issues lag far behind. This leads to designs and eventually composites with disappointing properties and unnecessarily high cost, thus impeding a wider industrial acceptance of polymer composites. Manufacturing of Polymer Composites completely covers pre- and post-design issues. While the book enables students to become fully comfortable with composites as a possible materials choice, it also provides sufficient knowledge about manufacturing-related issues to permit them to avoid common pitfalls and unmanufacturable designs. The book is a fully comprehensive text covering all commercially significant materials and manufacturing techniques while at the same time discussing areas of research and development that are nearing commercial reality.

Download or read book Handbook of Bioplastics and Biocomposites Engineering Applications written by Srikanth Pilla and published by John Wiley & Sons. This book was released on 2011-07-20 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook is the first to explore the extensive applications made with bioplastics & biocomposites for the packaging, automotive, biomedical, and construction industries. Bioplastics and biocomposites are becoming increasingly prominent because synthetic plastics and glass fiber composites are neither sustainable nor environmentally friendly. The Handbook of Bioplastics and Biocomposites Engineering Applications brings together scientists from academia and industry to report on current research and applications in the bioplastics and biocomposites arena. This new science is interdisciplinary and integrates pure and applied sciences such as chemistry, engineering and materials science. The Handbook focuses on five main categories of applications: Packaging; Civil Engineering; Biomedical; Automotive; General Engineering. The majority of the chapters review the properties, processing, characterization, synthesis and applications of the bio-based and biodegradable polymers and composites including: Polymers such as polylactic acid (PLA), polyhydroxybutyrate (PHB), guar gum based plastics, cellulose polyesters, starch based bioplastics, vegetable oil derived bioplastics, biopolyethylene, chitosan, etc. Thermoplastic and thermosetting bioplastics and biocomposites with a focus on the automobile industry. The ways how to improve the properties of bioplastics, polymer blends, and biocomposites by combining them with both synthetic and natural fillers and reinforcements such as nanoclays, nanotubes (CNTs), and natural fibers (both wood and plant fibers). Studies that expand the boundaries of bioplastics that will allow for the new materials to be applied to most generic engineering applications. The Handbook will be of central interest to engineers, scientists and researchers who are working in the fields of bioplastics, biocomposites, biomaterials for biomedical engineering, biochemistry, and materials science. The book will also be of great importance to engineers in many industries including automotive, biomedical, construction, and food packaging.

Download or read book Manufacturing Techniques for Polymer Matrix Composites PMCs written by Suresh G Advani and published by Elsevier. This book was released on 2012-07-18 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer matrix composites are used extensively across a wide range of industries, making the design and development of effective manufacturing processes of great importance. Manufacturing techniques for polymer matrix composites (PMCs) provides an authoritative review of the different technologies employed in the manufacture of this class of composite. Following an introduction to composites and manufacturing processes, part one reviews the manufacturing of short fiber and nanoparticle based polymer matrix composites, with injection and compression molding examined in depth. Thermoplastic processing is the focus of part two. Sheet forming, fabric thermostamping, filament winding and continuous fiber reinforced profiles are investigated. Part three reviews thermoset processing. A survey of resin transfer molding follows, including vacuum-assisted and compression resin transfer molding. The pultrusion process is then considered, before the book concludes with an investigation into autoclave and out-of-autoclave curing processes in polymer matrix composites. With its distinguished editors and international team of expert contributors, Manufacturing techniques for polymer matrix composites (PMCs) is an essential guide for engineers and scientists working in the field of polymer matrix composites. Provides an authoritative review of the different technologies employed in the manufacture of polymer matrix composites Reviews the manufacturing of short fiber and nanoparticle-based polymer matrix composites, with injection and compression molding examined in depth Examines thermoplastic processing, sheet forming, fabric thermostamping, filament winding and continuous fiber reinforced profiles

Download or read book Polymers and Composites Manufacturing written by Kaushik Kumar and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-02-24 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume reviews a wide range of processing methods which are currently being used for plastics and composites. Special focus lies on advancements in automation, in development of machines and new software for modeling, new materials for ease in manufacturing and strategies to increase productivity.

Download or read book Soft Computing in the Design and Manufacturing of Composite Materials written by Dragan Aleksendric and published by Woodhead Publishing. This book was released on 2015-01-23 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to problems associated with the design and manufacturing of composite materials, there is a need to introduce computational and intelligent systems engineering methodology in materials engineering. Soft Computing in the Design and Manufacturing of Composite Material offers an intelligent approach to advance material engineering, and significantly improves the process of designing and manufacturing a new material. This title includes chapters covering topics such as soft computing techniques, composite materials engineering, design and manufacturing of composite materials, numerical modeling, prediction, and optimization of the composite materials performance, development of the hybrid models, and control of the composite material performance. Introduction of soft computing in the composite materials engineering Includes accurate and detailed analysis of the current state of the art in the field Development of the intelligent models for design and manufacturing of composite material Details composite material performance prediction Optimization of the manufacturing process of composite materials

Download or read book Composite Sheet Forming written by D. Bhattacharyya and published by Elsevier. This book was released on 1997-06-18 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sheet forming is the most common process used in metal forming and is therefore constantly being adapted or modified to suit the needs of forming composite sheets. Due to the increasing availability of various types of fibre reinforced polymeric sheets, especially with thermoplastic matrices, the scope of use of such materials is rapidly expanding in the automobile, building, sports and other manufacturing industries beyond the traditional areas of aerospace and aircraft applications. This book contains twelve chapters and attempts to cover different aspects of sheet forming including both thermoplastic and thermosetting materials. In view of the expanded role of fibre reinforced composite sheets in the industry, the book also describes some non-traditional applications, processes and analytical techniques involving such materials. The first chapter is a brief introduction to the principles of sheet metal forming. The next two chapters introduce the various forms of materials, manufacturing techniques and the fundamentals of computer simulation. Chapter 4 describes the different aspects of thermoforming of continuous fibre reinforced thermoplastics and the following chapter studies the shear and frictional behaviour of composite sheets during forming. Chapter 6 explores the possibility of applying the grid strain analysis method in continuous fibre reinforced polymeric sheets. The next two chapters address fundamental concepts and recent developments in finite element modelling and rheology. Chapter 9 introduces the theory of bending of thermoplastic composite sheets and shows a novel way of determining both longitudinal and transverse viscosities through vee-bend tests. A significant expansion in the usage of composite materials is taking place in biomedical areas. Chapter 10 discusses the thermoforming of knitted fabric reinforced thermoplastics for load bearing and anisotropic bio-implants. The final chapter introduces roll forming, a commonly used rapid manufacturing process for sheet metals, and discusses the possibility of applying it economically for continuous reinforced thermoplastic sheets.

Download or read book Flow Induced Alignment in Composite Materials written by T.D. Papathanasiou and published by Woodhead Publishing. This book was released on 2021-10-19 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of aligning short fibers in a fiber-reinforced material is to improve the mechanical properties of the resulting composite. Aligning the fibers, generally in a preferred direction, allows them to contribute as much as possible to reinforcing the material. The first edition of this book detailed, in a single volume, the science, processing, applications, characterization and properties of composite materials reinforced with short fibers that have been orientated in a preferred direction by flows arising during processing. The technology of fiber-reinforced composites is continually evolving and this new edition provides timely and much needed information about this important class of engineering materials. Each of the original chapters have been brought fully up-to-date and new developments such as: the advent of nano-composites and the issues relating to their alignment; the wider use of long-fiber composites and the appearance of models able to capture their orientation during flow; the wider use of flows in micro-channels in the context of composites fabrication; and the increase in computing power, which has made relevant simulations (especially coupling flow kinematics to fiber content and orientation) much easier to perform are all covered in detail. The book will be an essential up-to-date reference resource for materials scientists, students, and engineers who are working in the relevant areas of particulate composites, short fiber-reinforced composites or nanocomposites. Presents recent progress on flow-induced alignment, modelling and design of fiber and particulate filled polymer composites Discusses important advances such as alignment of CNTs in polymer nanocomposites and molecular alignment of polymers induced by the injection molding process in the presence of fillers such as short fibers Presents fiber interaction/diffusion modelling and also the fiber flexure/breakage models