Download or read book Flow and Heat Transfer in Rotating disc Systems written by J. M. Owen and published by . This book was released on 1989 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is devoted to the flow and heat transfer between co-rotating discs, and unifies the subject by means of physical insight and mathematical models, validated using experimental data. Many phenomena, unique to rotating flows, are explained, and empirical correlations and theoretical methods, suitable for design purposes, are presented. Data is provided within the book for validating CFD codes which are being increasingly used to compute the flow in rotating-disc systems. Since the publication of Volume 1 in 1989, there has been an increasing interest in rotating disc systems, mainly from research workers and engine designers concerned with understanding and computing the complex flow and heat transfer that occur inside the internal cooling-systems of gas-turbine engines. This book should be of interest to them as it may assist them in making more efficient use of cooling air systems, resulting in both economic and environmental benefits.
Download or read book Flow and Heat Transfer in Rotating disc Systems written by John Michael Owen and published by . This book was released on 1989 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discussing fluid mechanics and heat transfer in rotating-disc systems, this text simplifies and extends existing information to provide a basic understanding of the subject. Physical insight, mathematical models and experimental data are used to explain the flow structure and provide theoretical methods and correlations which will be of use to research workers and designers.
Download or read book Convective Heat and Mass Transfer in Rotating Disk Systems written by Igor V. Shevchuk and published by Springer Science & Business Media. This book was released on 2009-12-01 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is devoted to investigation of a series of problems of convective heat and mass transfer in rotating-disk systems. Such systems are widespread in scienti?c and engineering applications. As examples from the practical area, one can mention gas turbine and computer engineering, disk brakes of automobiles, rotating-disk air cleaners, systems of microclimate, extractors, dispensers of liquids, evaporators, c- cular saws, medical equipment, food process engineering, etc. Among the scienti?c applications, it is necessary to point out rotating-disk electrodes used for experim- tal determination of the diffusion coef?cient in electrolytes. The system consisting of a ?xed disk and a rotating cone that touches the disk by its vertex is widely used for measurement of the viscosity coef?cient of liquids. For time being, large volume of experimental and computational data on par- eters of ?uid ?ow, heat and mass transfer in different types of rotating-disk systems have been accumulated, and different theoretical approaches to their simulation have been developed. This obviously causes a need of systematization and generalization of these data in a book form.
Download or read book Rotating Flow written by Peter Childs and published by Elsevier. This book was released on 2010-10-29 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rotating flow is critically important across a wide range of scientific, engineering and product applications, providing design and modeling capability for diverse products such as jet engines, pumps and vacuum cleaners, as well as geophysical flows.Developed over the course of 20 years' research into rotating fluids and associated heat transfer at the University of Sussex Thermo-Fluid Mechanics Research Centre (TFMRC), Rotating Flow is an indispensable reference and resource for all those working within the gas turbine and rotating machinery industries.Traditional fluid and flow dynamics titles offer the essential background but generally include very sparse coverage of rotating flows—which is where this book comes in. Beginning with an accessible introduction to rotating flow, recognized expert Peter Childs takes you through fundamental equations, vorticity and vortices, rotating disc flow, flow around rotating cylinders and flow in rotating cavities, with an introduction to atmospheric and oceanic circulations included to help deepen understanding.Whilst competing resources are weighed down with complex mathematics, this book focuses on the essential equations and provides full workings to take readers step-by-step through the theory so they can concentrate on the practical applications. - A detailed yet accessible introduction to rotating flows, illustrating the differences between flows where rotation is significant and highlighting the non-intuitive nature of rotating flow fields - Written by world-leading authority on rotating flow, Peter Childs, making this a unique and authoritative work - Covers the essential theory behind engineering applications such as rotating discs, cylinders, and cavities, with natural phenomena such as atmospheric and oceanic flows used to explain underlying principles - Provides a rigorous, fully worked mathematical account of rotating flows whilst also including numerous practical examples in daily life to highlight the relevance and prevalence of different flow types - Concise summaries of the results of important research and lists of references included to direct readers to significant further resources
Download or read book Handbook of Thermal Science and Engineering written by and published by Springer. This book was released on 2018-07-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook provides researchers, faculty, design engineers in industrial R&D, and practicing engineers in the field concise treatments of advanced and more-recently established topics in thermal science and engineering, with an important emphasis on micro- and nanosystems, not covered in earlier references on applied thermal science, heat transfer or relevant aspects of mechanical/chemical engineering. Major sections address new developments in heat transfer, transport phenomena, single- and multiphase flows with energy transfer, thermal-bioengineering, thermal radiation, combined mode heat transfer, coupled heat and mass transfer, and energy systems. Energy transport at the macro-scale and micro/nano-scales is also included. The internationally recognized team of authors adopt a consistent and systematic approach and writing style, including ample cross reference among topics, offering readers a user-friendly knowledgebase greater than the sum of its parts, perfect for frequent consultation. The Handbook of Thermal Science and Engineering is ideal for academic and professional readers in the traditional and emerging areas of mechanical engineering, chemical engineering, aerospace engineering, bioengineering, electronics fabrication, energy, and manufacturing concerned with the influence thermal phenomena.
Download or read book Flow and Heat Transfer in Rotating disc Systems Rotating cavities written by J. M. Owen and published by Research Studies PressLtd. This book was released on 1989 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is devoted to the flow and heat transfer between co-rotating discs, and unifies the subject by means of physical insight and mathematical models, validated using experimental data. Many phenomena, unique to rotating flows, are explained, and empirical correlations and theoretical methods, suitable for design purposes, are presented. Data is provided within the book for validating CFD codes which are being increasingly used to compute the flow in rotating-disc systems. Since the publication of Volume 1 in 1989, there has been an increasing interest in rotating disc systems, mainly from research workers and engine designers concerned with understanding and computing the complex flow and heat transfer that occur inside the internal cooling-systems of gas-turbine engines. This book should be of interest to them as it may assist them in making more efficient use of cooling air systems, resulting in both economic and environmental benefits.
Download or read book Convective Heat Transfer From Rotating Disks Subjected To Streams Of Air written by Stefan aus der Wiesche and published by Springer. This book was released on 2015-07-15 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Brief describes systematically results of research studies on a series of convective heat transfer phenomena from rotating disks in air crossflow. Phenomena described in this volume were investigated experimentally using an electrically heated disk placed in the test section of a wind tunnel. The authors describe findings in which transitions between different heat transfer regimes can occur in dependency on the involved Reynolds numbers and the angle of incidence, and that these transitions could be related to phenomenological Landau and Landau-de Gennes models. The concise volume closes a substantial gap in the scientific literature with respect to flow and heat transfer in rotating disk systems and provides a comprehensive presentation of new and recent results not previously published in book form.
Download or read book Flow and Heat Transfer in Rotating Disc Systems written by Owen and published by Research Studies Press. This book was released on 1995-11-01 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume one of this set discusses fluid mechanics and heat transfer in rotating-disc systems, and simplifies and extends existing information to provide a basic understanding of the subject. Physical insight, mathematical models and experimental data are used to explain the flow structure and provide theoretical methods and correlations which will be of use to research workers and designers.
Download or read book Modelling of Convective Heat and Mass Transfer in Rotating Flows written by Igor V. Shevchuk and published by Springer. This book was released on 2015-07-24 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents results of the analytical and numerical modeling of convective heat and mass transfer in different rotating flows caused by (i) system rotation, (ii) swirl flows due to swirl generators, and (iii) surface curvature in turns and bends. Volume forces (i.e. centrifugal and Coriolis forces), which influence the flow pattern, emerge in all of these rotating flows. The main part of this work deals with rotating flows caused by system rotation, which includes several rotating-disk configurations and straight pipes rotating about a parallel axis. Swirl flows are studied in some of the configurations mentioned above. Curvilinear flows are investigated in different geometries of two-pass ribbed and smooth channels with 180° bends. The author demonstrates that the complex phenomena of fluid flow and convective heat transfer in rotating flows can be successfully simulated using not only the universal CFD methodology, but in certain cases by means of the integral methods, self-similar and analytical solutions. The book will be a valuable read for research experts and practitioners in the field of heat and mass transfer.
Download or read book Fluid Mechanics and Turbomachinery written by Bijay K Sultanian and published by CRC Press. This book was released on 2021-07-21 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the author’s years of industry and teaching experience, Fluid Mechanics and Turbomachinery features many innovative problems and their systematically worked solutions. To understand fundamental concepts and various conservation laws of fluid mechanics is one thing, but applying them to solve practical problems is another challenge. The book covers various topics in fluid mechanics, turbomachinery flowpath design, and internal cooling and sealing flows around rotors and stators of gas turbines. As an ideal source of numerous practice problems with detailed solutions, the book will be helpful to senior-undergraduate and graduate students, teaching faculty, and researchers engaged in many branches of fluid mechanics. It will also help practicing thermal and fluid design engineers maintain and reinforce their problem-solving skills, including primary validation of their physics-based design tools.
Download or read book Proceedings Of The International Heat Transfer Conference written by Lee and published by CRC Press. This book was released on 1998-11-01 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: This year's set of papers includes 23 Keynote Papers and 537 refereed General Papers, in seven volumes. Experts from around the world have combined to address the leading edge of research and practical innovations in convection, combustion, heat exchangers, two-phase flow, and much more. Whether one is involved in mechanical, chemical, nuclear, or energy engineering the quantity, international scope, and high quality of the contents make access to these volumes essential.
Download or read book Rotor stator Spinning Disc Reactor written by Marco Meeuwse and published by . This book was released on 2011 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rotating Machinery written by J. H. Kim and published by CRC Press. This book was released on 1992-05-01 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work the first of two contains papers presented at an international conference on the technology of rotating machinery, which specifically address transport phenomena in terms of turbine cooling heat transfer, rotating surfaces, curved ducts and rotating channels, multiphase flow and more.
Download or read book Theory and Applications of Viscous Fluid Flows written by Radyadour Kh. Zeytounian and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book closes the gap between standard undergraduate texts on fluid mechanics and monographical publications devoted to specific aspects of viscous fluid flows. Each chapter serves as an introduction to a special topic that will facilitate later application by readers in their research work.
Download or read book Flow Control Techniques and Applications written by Jinjun Wang and published by Cambridge University Press. This book was released on 2019 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master the theory, applications and control mechanisms of flow control techniques.
Download or read book Proceedings of the 6th China Aeronautical Science and Technology Conference written by Chinese Aeronautical Society and published by Springer Nature. This book was released on 2024-01-03 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the original peer-reviewed research papers presented at the 6th China Aeronautical Science and Technology Conference held in Wuzhen, Zhejiang Province, China, in September 2023. Topics covered include but are not limited to Navigation/Guidance and Control Technology, Aircraft Design and Overall Optimisation of Key Technologies, Aviation Testing Technology, Airborne Systems/Electromechanical Technology, Structural Design, Aerodynamics and Flight Mechanics, Advanced Aviation Materials and Manufacturing Technology, Advanced Aviation Propulsion Technology, and Civil Aviation Transportation. The papers presented here share the latest findings in aviation science and technology, making the book a valuable resource for researchers, engineers and students in related fields.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1993 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
