Download or read book Natural Gas Hydrates written by John Carroll and published by Gulf Professional Publishing. This book was released on 2020-05-12 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural Gas Hydrates, Fourth Edition, provides a critical reference for engineers who are new to the field. Covering the fundamental properties, thermodynamics and behavior of hydrates in multiphase systems, this reference explains the basics before advancing to more practical applications, the latest developments and models. Updated sections include a new hydrate toolbox, updated correlations and computer methods. Rounding out with new case study examples, this new edition gives engineers an important tool to continue to control and mitigate hydrates in a safe and effective manner. - Presents an updated reference with structured comparisons on hydrate calculation methods that are supported by practical case studies and a current list of inhibitor patents - Provides a comprehensive understanding of new hydrate management strategies, particularly for multiphase pipeline operations - Covers future challenges, such as carbon sequestration with simultaneous production of methane from hydrates

Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Offshore Pipelines written by Boyun Guo and published by Elsevier. This book was released on 2005-04-25 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offshore Pipelines covers the full scope of pipeline development from pipeline designing, installing, and testing to operating. It gathers the authors' experiences gained through years of designing, installing, testing, and operating submarine pipelines. The aim is to provide engineers and management personnel a guideline to achieve cost-effective management in their offshore and deepwater pipeline development and operations. The book is organized into three parts. Part I presents design practices used in developing submarine oil and gas pipelines and risers. Contents of this part include selection of pipe size, coating, and insulation. Part II provides guidelines for pipeline installations. It focuses on controlling bending stresses and pipe stability during laying pipelines. Part III deals with problems that occur during pipeline operations. Topics covered include pipeline testing and commissioning, flow assurance engineering, and pigging operations. This book is written primarily for new and experienced engineers and management personnel who work on oil and gas pipelines in offshore and deepwater. It can also be used as a reference for college students of undergraduate and graduate levels in Ocean Engineering, Mechanical Engineering, and Petroleum Engineering.* Pipeline design engineers will learn how to design low-cost pipelines allowing long-term operability and safety.* Pipeline operation engineers and management personnel will learn how to operate their pipeline systems in a cost effective manner.* Deepwater pipelining is a new technology developed in the past ten years and growing quickly.

Download or read book Natural Gas Hydrates in Flow Assurance written by Carolyn Ann Koh and published by Gulf Professional Publishing. This book was released on 2010-10-12 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: With millions of kilometres of onshore and offshore oil and gas pipelines in service around the world, pipelines are the life's blood of the world. Notorious for disrupting natural gas production or transmission, the formation of natural gas hydrates can cost a company hundreds of millions and lead to catastrophic equipment breakdowns and safety and health hazards. Written by an international group of experts, Natural Gas Hydrates in Flow Assurance provide an expert overview of the practice and theory in natural gas hydrates, with applications primarily in flow assurance. Compact and easy to use, the book provides readers with a wealth of materials which include the key lessons learned in the industry over the last 20 years. Packed with field case studies, the book is designed to provide hands-on training and practice in calculating hydrate phase equilibria and plug dissociation. In addition readers receive executable programs to calculate hydrate thermodynamics. - Case studies of hydrates in flow assurance - The key concepts underlying the practical applications - An overview of the state of the art flow assurance industrial developments

Download or read book Design and Installation of Marine Pipelines written by Mikael Braestrup and published by John Wiley & Sons. This book was released on 2009-02-12 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook on submarine pipeline systems covers a broad spectrum of topics from planning and site investigations, procurement and design, to installation and commissioning. It considers guidelines for the choice of design parameters, calculation methods and construction procedures. It is based on limit state design with partial safety coefficients.

Download or read book Wax Deposition written by Zhenyu Huang and published by CRC Press. This book was released on 2016-03-09 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wax Deposition: Experimental Characterizations, Theoretical Modeling, and Field Practices covers the entire spectrum of knowledge on wax deposition. The book delivers a detailed description of the thermodynamic and transport theories for wax deposition modeling as well as a comprehensive review of laboratory testing for the establishment of appropr

Download or read book Applied Welding Engineering written by Ramesh Singh and published by Elsevier. This book was released on 2011-11-01 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: While there are several books on market that are designed to serve a company's daily shop-floor needs. Their focus is mainly on the physically making specific types of welds on specific types of materials with specific welding processes. There is nearly zero focus on the design, maintenance and troubleshooting of the welding systems and equipment. Applied Welding Engineering: Processes, Codes and Standards is designed to provide a practical in-depth instruction for the selection of the materials incorporated in the joint, joint inspection, and the quality control for the final product. Welding Engineers will also find this book a valuable source for developing new welding processes or procedures for new materials as well as a guide for working closely with design engineers to develop efficient welding designs and fabrication procedures. Applied Welding Engineering: Processes, Codes and Standards is based on a practical approach. The book's four part treatment starts with a clear and rigorous exposition of the science of metallurgy including but not limited to: Alloys, Physical Metallurgy, Structure of Materials, Non-Ferrous Materials, Mechanical Properties and Testing of Metals and Heal Treatment of Steels. This is followed by self-contained sections concerning applications regarding Section 2: Welding Metallurgy & Welding Processes, Section 3: Nondestructive Testing, and Section 4: Codes and Standards. The author's objective is to keep engineers moored in the theory taught in the university and colleges while exploring the real world of practical welding engineering. Other topics include: Mechanical Properties and Testing of Metals, Heat Treatment of Steels, Effect of Heat on Material During Welding, Stresses, Shrinkage and Distortion in Welding, Welding, Corrosion Resistant Alloys-Stainless Steel, Welding Defects and Inspection, Codes, Specifications and Standards. The book is designed to support welding and joining operations where engineers pass plans and projects to mid-management personnel who must carry out the planning, organization and delivery of manufacturing projects. In this book, the author places emphasis on developing the skills needed to lead projects and interface with engineering and development teams. In writing this book, the book leaned heavily on the author's own experience as well as the American Society of Mechanical Engineers (www.asme.org), American Welding Society (www.aws.org), American Society of Metals (www.asminternational.org), NACE International (www.nace.org), American Petroleum Institute (www.api.org), etc. Other sources includes The Welding Institute, UK (www.twi.co.uk), and Indian Air force training manuals, ASNT (www.asnt.org), the Canadian Standard Association (www.cas.com) and Canadian General Standard Board (CGSB) (www.tpsgc-pwgsc.gc.ca). - Rules for developing efficient welding designs and fabrication procedures - Expert advice for complying with international codes and standards from the American Welding Society, American Society of Mechanical Engineers, and The Welding Institute(UK) - Practical in-depth instruction for the selection of the materials incorporated in the joint, joint inspection, and the quality control for the final product.

Download or read book Ionic Liquids in Flow Assurance written by Bhajan Lal and published by Springer Nature. This book was released on 2020-12-05 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the application of ionic liquids in flow assurance in the oil and gas industry. It discusses their physiochemical properties, and considers the role of ionic liquids as gas hydrate inhibitors in offshore pipelines. Gas hydrate occurrence can pose a major threat to pipeline integrity. Therefore, different categories of gas hydrate inhibitors and the main factors influencing ionic liquids during gas hydrate inhibition are examined thoroughly. The use of ionic liquids as corrosion inhibitors, their application in flow assurance industry to mitigate corrosion, and factors affecting their performance are discussed. Finally, the applications of ionic liquids in wax, scale and asphaltenes deposition control is explored. The extensive discussion of ionic liquids in flow assurance mean that this book will be of use to researchers, engineers, and industry professionals in upstream processing of the oil and gas sector.

Download or read book Introduction to Permanent Plug and Abandonment of Wells written by Mahmoud Khalifeh and published by Springer Nature. This book was released on 2020-01-27 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book offers a timely guide to challenges and current practices to permanently plug and abandon hydrocarbon wells. With a focus on offshore North Sea, it analyzes the process of plug and abandonment of hydrocarbon wells through the establishment of permanent well barriers. It provides the reader with extensive knowledge on the type of barriers, their functioning and verification. It then discusses plug and abandonment methodologies, analyzing different types of permanent plugging materials. Last, it describes some tests for verifying the integrity and functionality of installed permanent barriers. The book offers a comprehensive reference guide to well plugging and abandonment (P&A) and well integrity testing. The book also presents new technologies that have been proposed to be used in plugging and abandoning of wells, which might be game-changing technologies, but they are still in laboratory or testing level. Given its scope, it addresses students and researchers in both academia and industry. It also provides information for engineers who work in petroleum industry and should be familiarized with P&A of hydrocarbon wells to reduce the time of P&A by considering it during well planning and construction.

Download or read book More Best Practices for Rotating Equipment written by Michael S. Forsthoffer and published by Butterworth-Heinemann. This book was released on 2017-02-06 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: More Best Practices for Rotating Equipment follows Forsthoffer's multi-volume Rotating Equipment Handbooks, addressing the latest best practices in industrial rotating machinery and also including a comprehensive treatment of the basics for reference. The author's famous troubleshooting approach teaches the reader proven methodologies for installation, operation, and maintenance of equipment, and covers all phases of work with rotating equipment. Reliability optimization is also addressed for the first time. The book is ideal for engineers working in the design, installation, operation, and maintenance of power machinery. It is also an essential source of information for postgraduate students and researchers of mechanical and industrial engineering. - Presents 200 new best practices for rotating equipment - Offers an easy-to-use reference, with each chapter addressing a different type of equipment - Covers all phases of work with rotating equipment, from pre-commissioning through maintenance

Download or read book Pipeline Risk Management Manual written by W. Kent Muhlbauer and published by Elsevier. This book was released on 2004-01-24 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here's the ideal tool if you're looking for a flexible, straightforward analysis system for your everyday design and operations decisions. This new third edition includes sections on stations, geographical information systems, "absolute" versus "relative" risks, and the latest regulatory developments. From design to day-to-day operations and maintenance, this unique volume covers every facet of pipeline risk management, arguably the most important, definitely the most hotly debated, aspect of pipelining today. Now expanded and updated, this widely accepted standard reference guides you in managing the risks involved in pipeline operations. You'll also find ways to create a resource allocation model by linking risk with cost and customize the risk assessment technique to your specific requirements. The clear step-by-step instructions and more than 50 examples make it easy. This edition has been expanded to include offshore pipelines and distribution system pipelines as well as cross-country liquid and gas transmission pipelines. - The only comprehensive manual for pipeline risk management - Updated material on stations, geographical information systems, "absolute" versus "relative" risks, and the latest regulatory developments - Set the standards for global pipeline risk management

Download or read book Petroleum Abstracts written by and published by . This book was released on 1996 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Subsea Engineering Handbook written by Yong Bai and published by Gulf Professional Publishing. This book was released on 2012-01-13 with total page 957 pages. Available in PDF, EPUB and Kindle. Book excerpt: Subsea production systems, overview of subsea engineering, subsea field development, subsea distribution system. Flow assurance and system engineering. Susea structure and equiment. Subsea umbilical, risers and flowlines.

Download or read book Natural Gas Processing written by Alireza Bahadori and published by Gulf Professional Publishing. This book was released on 2014-05-05 with total page 893 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural gas is considered the dominant worldwide bridge between fossil fuels of today and future resources of tomorrow. Thanks to the recent shale boom in North America, natural gas is in a surplus and quickly becoming a major international commodity. Stay current with conventional and now unconventional gas standards and procedures with Natural Gas Processing: Technology and Engineering Design. Covering the entire natural gas process, Bahadori's must-have handbook provides everything you need to know about natural gas, including: - Fundamental background on natural gas properties and single/multiphase flow factors - How to pinpoint equipment selection criteria, such as US and international standards, codes, and critical design considerations - A step-by-step simplification of the major gas processing procedures, like sweetening, dehydration, and sulfur recovery - Detailed explanation on plant engineering and design steps for natural gas projects, helping managers and contractors understand how to schedule, plan, and manage a safe and efficient processing plant - Covers both conventional and unconventional gas resources such as coal bed methane and shale gas - Bridges natural gas processing with basic and advanced engineering design of natural gas projects including real world case studies - Digs deeper with practical equipment sizing calculations for flare systems, safety relief valves, and control valves

Download or read book Produced Water written by Kenneth Lee and published by Springer Science & Business Media. This book was released on 2011-09-18 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: A state-of-the-art review of scientific knowledge on the environmental risk of ocean discharge of produced water and advances in mitigation technologies. In offshore oil and gas operations, produced water (the water produced with oil or gas from a well) accounts for the largest waste stream (in terms of volume discharged). Its discharge is continuous during oil and gas production and typically increases in volume over the lifetime of an offshore production platform. Produced water discharge as waste into the ocean has become an environmental concern because of its potential contaminant content. Environmental risk assessments of ocean discharge of produced water have yielded different results. For example, several laboratory and field studies have shown that significant acute toxic effects cannot be detected beyond the "point of discharge" due to rapid dilution in the receiving waters. However, there is some preliminary evidence of chronic sub-lethal impacts in biota associated with the discharge of produced water from oil and gas fields within the North Sea. As the composition and concentration of potential produced water contaminants may vary from one geologic formation to another, this conference also highlights the results of recent studies in Atlantic Canada.

Download or read book Stress Corrosion Cracking of Pipelines written by Y. Frank Cheng and published by John Wiley & Sons. This book was released on 2013-02-13 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains why pipeline stress corrosion cracking happens and how it can be prevented Pipelines sit at the heart of the global economy. When they are in good working order, they deliver fuel to meet the ever-growing demand for energy around the world. When they fail due to stress corrosion cracking, they can wreak environmental havoc. This book skillfully explains the fundamental science and engineering of pipeline stress corrosion cracking based on the latest research findings and actual case histories. The author explains how and why pipelines fall prey to stress corrosion cracking and then offers tested and proven strategies for preventing, detecting, and monitoring it in order to prevent pipeline failure. Stress Corrosion Cracking of Pipelines begins with a brief introduction and then explores general principals of stress corrosion cracking, including two detailed case studies of pipeline failure. Next, the author covers: Near-neutral pH stress corrosion cracking of pipelines High pH stress corrosion cracking of pipelines Stress corrosion cracking of pipelines in acidic soil environments Stress corrosion cracking at pipeline welds Stress corrosion cracking of high-strength pipeline steels The final chapter is dedicated to effective management and mitigation of pipeline stress corrosion cracking. Throughout the book, the author develops a number of theoretical models and concepts based on advanced microscopic electrochemical measurements to help readers better understand the occurrence of stress corrosion cracking. By examining all aspects of pipeline stress corrosion cracking—the causes, mechanisms, and management strategies—this book enables engineers to construct better pipelines and then maintain and monitor them to ensure safe, reliable energy supplies for the world.

Download or read book Subsea Pipelines and Risers written by Yong Bai and published by Elsevier. This book was released on 2005-12-05 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: • Updated edition of a best-selling title • Author brings 25 years experience to the work • Addresses the key issues of economy and environment Marine pipelines for the transportation of oil and gas have become a safe and reliable way to exploit the valuable resources below the world's seas and oceans. The design of these pipelines is a relatively new technology and continues to evolve in its quest to reduce costs and minimise the effect on the environment. With over 25years experience, Professor Yong Bai has been able to assimilate the essence of the applied mechanics aspects of offshore pipeline system design in a form of value to students and designers alike. It represents an excellent source of up to date practices and knowledge to help equip those who wish to be part of the exciting future of this industry.