Download or read book ON THE FLEXURAL BEHAVIOR OF CONCRETE BEAMS PRESTRESSED WITH UNBONDED INTERNAL AND EXTERNAL TENDONS UNBONDED TENDONS BEAMS written by FADI MAAZ ALKHAIRI and published by . This book was released on 1991 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: from 15 different investigations. Excellent correlation was obtained between predicted vs. experimental results. The present investigation suggests that shear deformations may have some effect on the stress increase in unbonded tendons for beams having low span-to-depth ratios, while eccentricity variations in external tendons significantly affect the overall behavior for beams having high span-to-depth ratios.
Download or read book Reinforced Concrete Structures written by Robert Park and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sets out basic theory for the behavior of reinforced concrete structural elements and structures in considerable depth. Emphasizes behavior at the ultimate load, and, in particular, aspects of the seismic design of reinforced concrete structures. Based on American practice, but also examines European practice.
Download or read book Flexural Behavior of Prestressed Concrete Composite Tee beams written by James Bryson and published by . This book was released on 1970 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prestressed Tee-beams constructed by the split-beam method were tested to failure in flexure to study the behavior and ultimate strength of these beams and to compare their flexural characteristics with those of prestressed beams of conventional construction. Results showed that composite split-beams behaved similarly to the monolithically constructed beams on the basis of flexural response and ultimate load.
Download or read book Design of Prestressed Concrete written by R. I. Gilbert and published by CRC Press. This book was released on 1990-09-13 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing both an introduction to basic concepts and an in-depth treatment of the most up-to-date methods for the design and analysis of concrete of structures, "Design of Prestressed Concrete" will service the needs of both students and professional engineers.
Download or read book Finite Element Analysis of Prestressed Concrete Structures Using Post Tensioning Steel written by Yu Huang and published by Cambridge Scholars Publishing. This book was released on 2020-05-28 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the theory and applications of finite element (FE) modeling of post-tensioned (PT) concrete structures, and provides the updated MATLAB code (as of 2019). The challenge of modeling PT prestressed concrete structures lies in the treatment of the interface between the concrete and prestressing tendons. Using MATLAB, this study develops an innovative nonlinear FE formulation which incorporates contact techniques and engineering elements to considerably reduce the need of computational power. This FE formulation has the ability to simulate different PT frame systems with fully bonded, fully unbonded or partially bonded tendons, as well as actual sliding behavior and frictional effects in the tendons. It also allows for the accurate simulation of anchor seating loss.
Download or read book Challenges Opportunities and Solutions in Structural Engineering and Construction written by Nader Ghafoori and published by CRC Press. This book was released on 2009-10-29 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: Challenges, Opportunities and Solutions in Structural Engineering and Construction addresses the latest developments in innovative and integrative technologies and solutions in structural engineering and construction, including: Concrete, masonry, steel and composite structures; Dynamic impact and earthquake engineering; Bridges and
Download or read book Time Dependent Behaviour of Concrete Structures written by Raymond Ian Gilbert and published by CRC Press. This book was released on 2010-09-15 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serviceability failures of concrete structures involving excessive cracking or deflection are relatively common, even in structures that comply with code requirements. This is often as a result of a failure to adequately account for the time-dependent deformations of concrete in the design of the structure. The serviceability provisions embodied in
Download or read book Design of Prestressed Concrete to Eurocode 2 Second Edition written by Raymond Ian Gilbert and published by CRC Press. This book was released on 2017-01-27 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of structures in general, and prestressed concrete structures in particular, requires considerably more information than is contained in building codes. A sound understanding of structural behaviour at all stages of loading is essential. This textbook presents a detailed description and explanation of the behaviour of prestressed concrete members and structures both at service loads and at ultimate loads and, in doing so, provide a comprehensive and up-to-date guide to structural design. Much of the text is based on first principles and relies only on the principles of mechanics and the properties of concrete and steel, with numerous worked examples. However, where the design requirements are code specific, this book refers to the provisions of Eurocode 2: Design of Concrete Structures and, where possible, the notation is the same as in Eurocode 2. A parallel volume is written to the Australian Standard for Concrete Structures AS3600-2009. The text runs from an introduction to the fundamentals to in-depth treatments of more advanced topics in modern prestressed concrete structures. It suits senior undergraduate and graduate students and also practising engineers who want comprehensive introduction to the design of prestressed concrete structures. It retains the clear and concise explanations and the easy-to-read style of the first edition, but the content has been extensively re-organised and considerably expanded and updated. New chapters cover design procedures, actions and loads; prestressing systems and construction requirements; connections and detailing; and design concepts for prestressed concrete bridges. The topic of serviceability is developed extensively throughout. All the authors have been researching and teaching the behaviour and design of prestressed concrete structures for over thirty-five years and the proposed new edition of the book reflects this wealth of experience. The work has also gained much from Professor Gilbert active and long-time involvement in the development of standards for concrete buildings and concrete bridges.
Download or read book Proceedings fib Symposium in Stuttgart written by FIB – International Federation for Structural Concrete and published by FIB - Féd. Int. du Béton. This book was released on 2008-09-01 with total page 1168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book PCI Journal written by and published by . This book was released on 2009 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Composites in Bridge Construction and Repair written by Yail Jimmy Kim and published by Elsevier. This book was released on 2014-05-16 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced composite materials for bridge structures are recognized as a promising alternative to conventional construction materials such as steel. After an introductory overview and an assessment of the characteristics of bonds between composites and quasi-brittle structures, Advanced Composites in Bridge Construction and Repair reviews the use of advanced composites in the design and construction of bridges, including damage identification and the use of large rupture strain fiber-reinforced polymer (FRP) composites. The second part of the book presents key applications of FRP composites in bridge construction and repair, including the use of all-composite superstructures for accelerated bridge construction, engineered cementitious composites for bridge decks, carbon fiber-reinforced polymer composites for cable-stayed bridges and for repair of deteriorated bridge substructures, and finally the use of FRP composites in the sustainable replacement of ageing bridge superstructures. Advanced Composites in Bridge Construction and Repair is a technical guide for engineering professionals requiring an understanding of the use of composite materials in bridge construction. - Reviews key applications of fiber-reinforced polymer (FRP) composites in bridge construction and repair - Summarizes key recent research in the suitability of advanced composite materials for bridge structures as an alternative to conventional construction materials
Download or read book Hybrid Composite Precast Systems written by Won-Kee Hong and published by Woodhead Publishing. This book was released on 2019-11-30 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Composite Precast Systems: Numerical Investigation to Construction focuses on the design and construction of novel composite precast frame systems that permit almost effortless erection and structural efficiency. The precast frame systems discussed in the book are similar to that of steel frames, but offer similar savings to concrete frames. The design of connections and detailed analysis of their structural behavior is discussed in detail. Fundamentals with regards to the post yield behavior of concrete and metal are also presented to illustrate how these two different materials are integrated together to remove individual material drawbacks. Readers are given a broad introduction to existing technologies that are then combined with a description of the construction methods the author proposes. This book will help the end users become familiar with the existing types of structural forms, not just the "Lego" type frame system that the author proposes. - Discusses how traditional construction methods can be replaced by innovative hybrid composite precast frame systems that provide rapid and effortless erection capabilities and structural efficiency - Contains several design examples using non-linear finite element analysis completed with Abaqus based-software - Contains new milestone inventions in construction that offer structural engineering solutions using a novel, modularized hybrid frame system - Provides information on structural testing that verifies the accuracy of the structural design
Download or read book EASEC16 written by Chien Ming Wang and published by Springer Nature. This book was released on 2020-12-22 with total page 2093 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents articles from The 16th East Asian-Pacific Conference on Structural Engineering and Construction, 2019, held in Brisbane, Australia. It provides a forum for professional engineers, academics, researchers and contractors to present recent research and developments in structural engineering and construction.
Download or read book FRP Composites for Reinforced and Prestressed Concrete Structures written by Perumalsamy Balaguru and published by CRC Press. This book was released on 2008-11-05 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: High strength fibre composites (FRPs) have been used with civil structures since the 1980s, mostly in the repair, strengthening and retrofitting of concrete structures. This has attracted considerable research, and the industry has expanded exponentially in the last decade. Design guidelines have been developed by professional organizations in a nu
Download or read book Analysis and Design of Prestressed Concrete written by Di Hu and published by Elsevier. This book was released on 2022-04-17 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prestressing concrete technology is critical to understanding problems in existing civic structures including railway and highway bridges; to the rehabilitation of older structures; and to the design of new high-speed railway and long-span highway bridges. Analysis and Design of Prestressed Concrete delivers foundational concepts, and the latest research and design methods for the engineering of prestressed concrete, paying particular attention to crack resistance in the design of high-speed railway and long-span highway prestressed concrete bridges. The volume offers readers a comprehensive resource on prestressing technology and applications, as well as the advanced treatment of prestress losses and performance. Key aspects of this volume include analysis and design of prestressed concrete structures using a prestressing knowledge system, from initial stages to service; detailed loss calculation; time-dependent analysis on cross-sectional stresses; straightforward, simplified methods specified in codes; and in-depth calculation methods. Sixteen chapters combine standards and current research, theoretical analysis, and design methods into a practical resource on the analysis and design of prestressed concrete, as well as presenting novel calculation methods and theoretical models of practical use to engineers. - Presents a new approach to calculating prestress losses due to anchorage seating - Provides a unified method for calculating long-term prestress loss - Details cross-sectional stress analysis of prestressed concrete beams from jacking to service - Explains a new calculation method for long-term deflection of beams caused by creep and shrinkage - Gives a new theoretical model for calculating long-term crack width
Download or read book Concrete Beams with Openings written by M. A. Mansur and published by CRC Press. This book was released on 1999-01-29 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles state-of-the-art information on the behavior, analysis, and design of concrete beams containing transverse openings. Discussions include the need, effects, and classification of openings as well as the general requirements for fulfilling design pure bending, combined bending, and shear - illustrated with numerical examples torsion alone or in combination with bending and shear large rectangular openings as well as opening size and location on beam behavior methods for analyzing ultimate strength and serviceability requirements effects of torsion in beams large openings in continuous beams and their effects on possible redistribution of internal forces as well as guidelines and procedures for the design of such beams effect of prestressing on the serviceability and strength of beams with web openings design against cracking at openings and ultimate loads Concrete Beams with Openings serves as an invaluable source of information for designers and practicing engineers, especially useful since little or no provision or guidelines are currently available in most building codes.
Download or read book Proceedings of the International Conference on Advances in Computational Mechanics 2017 written by Hung Nguyen-Xuan and published by Springer. This book was released on 2018-02-20 with total page 1137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of state-of-the-art methods in computational engineering for modeling and simulation. This proceedings volume includes a selection of refereed papers presented at the International Conference on Advances in Computational Mechanics (ACOME) 2017, which took place on Phu Quoc Island, Vietnam on August 2-4, 2017. The contributions highlight recent advances in and innovative applications of computational mechanics. Subjects covered include: biological systems; damage, fracture and failure; flow problems; multiscale multiphysics problems; composites and hybrid structures; optimization and inverse problems; lightweight structures; computational mechatronics; computational dynamics; numerical methods; and high-performance computing. The book is intended for academics, including graduate students and experienced researchers interested in state-of-the-art computational methods for solving challenging problems in engineering.
