Download or read book Flexible Production Scheduling System The National Shipbuilding Research Program written by and published by . This book was released on 1986 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: A schedule which is developed in phases is far more effective than a schedule which attempts a level of de tail beyond the progress of design. Prerequisites for scheduling that result in high performances by production processes and constant improvements in a scheduling system are: accurate information of material volume (total materials required) corresponding with each level of design development; a system for first assessing all materials required in large groups or units and, as each design phase develops, for refining all material requirements into small groups or units,; statistically acquired parameters, based on past performances, which associate man-hours normally required with each material group or unit so as to accurately predict work volume (material volume x parameter work volume); timely preparation of drawings, material lists and purchase order specifications; effective material management systems for material procurement and marshaling per schedules, and procedures for workload leveling and for regulating the rate of work.

Download or read book Flexible Production Scheduling System written by United States. Maritime Administration and published by . This book was released on 1986 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Production Planning and Scheduling in Flexible Assembly Systems written by Tadeusz Sawik and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book familiarizes the reader with the flexible assembly systems planning and scheduling issues and various operations research modelling and solution approaches. Some of the many topic highlights presented are the overall structure and components of a flexible assembly system, bi-objective integer programming models and algorithms for machine loading, assembly routing, and assembly plan selection, and fast combinatorial heuristics for scheduling flexible assembly lines with limited intermediate buffers. Also the book deals with just-in-time scheduling of flexible assembly lines, and dynamic dispatching algorithms for simultaneous scheduling of assembly stations and automated guided vehicles.

Download or read book Design of Flexible Production Systems written by Tullio Tolio and published by Springer Science & Business Media. This book was released on 2008-12-11 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade, the production of mechanical components to be assembled in final products produced in high volumes (e.g. cars, mopeds, industrial vehicles, etc.) has undergone deep changes due to the overall modifications in the way companies compete. Companies must consider competitive factors such as short lead times, tight product tolerances, frequent market changes and cost reduction. Anyway, companies often have to define production objectives as trade-offs among these critical factors since it can be difficult to improve all of them. Even if system flexibility is often considered a fundamental requirement for firms, it is not always a desirable characteristic of a system because it requires relevant investment cost which can jeopardize the profitability of the firm. Dedicated systems are not able to adapt to changes of the product characteristics while flexible systems offer more flexibility than what is needed, thus increasing investment and operative costs. Production contexts characterized by mid to high demand volume of well identified families of products in continuous evolution do not require the highest level of flexibility; therefore, manufacturing system flexibility must be rationalized and it is necessary to find out the best trade-off between productivity and flexibility by designing manufacturing systems endowed with the right level of flexibility required by the production problem. This new class of production systems can be named Focused Flexibility Manufacturing Systems-FFMSs. The flexibility degree in FFMSs is related to their ability to cope with volume, mix and technological changes, and it must take into account both present and future changes. The required level of system flexibility impacts on the architecture of the system and the explicit design of flexibility often leads to hybrid systems, i.e. automated integrated systems in which parts can be processed by both general purpose and dedicated machines. This is a key issue of FFMSs and results from the matching of flexibility and productivity that respectively characterize FMSs and Dedicated Manufacturing Systems (DMSs). The market share of the EU in the machine tool sector is 44%; the introduction of focused flexibility would be particularly important for machine tool builders whose competitive advantage is based on the ability of customizing their systems on the basis of needs of their customers. In fact, even if current production contexts frequently present situations which would fit well with the FFMS approach, tradition and know-how of machine tool builders play a crucial role. Firms often agree with the focused flexibility vision, nevertheless they decide not to pay the risk and efforts related to the design of this new system architecture. This is due also to the lack of well-structured design approaches which can help machine tool builders to configure innovative systems. Therefore, the FFMS topic is studied through the book chapters following a shared mission: "To define methodologies and tools to design production systems with a minimum level of flexibility needed to face, during their lifecycle, the product and process evolution both in the technological and demand aspects. The goal is to find out the optimal trade-off between flexibility and productivity". The book framework follows the architecture which has been developed to address the FFMS Design problem. This architecture is both broad and detailed, since it pays attention to all the relevant levels in a firm hierarchy which are involved in the system design. Moreover, the architecture is innovative because it models both the point of view of the machine tool builder and the point of view of the system user. The architecture starts analyzing Manufacturing Strategy issues and generating the possible demand scenario to be faced. Technological aspects play a key role while solving process plan problems for the products in the part family. Strategic and technological data becomes input when a machine tool builder performs system configuration. The resulting system configurations are possible solutions that a system user considers when planning its system capacity. All the steps of the architecture are deeply studied, developing methods and tools to address each subproblem. Particular attention is paid to the methodologies adopted to face the different subproblems: mathematical programming, stochastic programming, simulation techniques and inverse kinematics have been used. The whole architecture provides a general approach to implement the right degree of flexibility and it allows to study how different aspects and decisions taken in a firm impact on each other. The work presented in the book is innovative because it gives links among different research fields, such as Manufacturing Strategy, Process Plan, System Design, Capacity Planning and Performance Evaluation; moreover, it helps to formalize and rationalize a critical area such as manufacturing system flexibility. The addressed problem is relevant at an academic level but, also, at an industrial level. A great deal of industrial sectors need to address the problem of designing systems with the right degree of flexibility; for instance, automotive, white goods, electrical and electronic goods industries, etc. Attention to industrial issues is confirmed by empirical studies and real case analyses which are presented within the book chapters.

Download or read book Production Scheduling Policy for Flexible Manufacturing Systems written by Zoe Doulgeri and published by . This book was released on 1987 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Industrial Production Management in Flexible Manufacturing Systems written by Dima, Ioan Constantin and published by IGI Global. This book was released on 2013-01-31 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Production Management in Flexible Manufacturing Systems addresses the present discussions surrounding flexible production systems based on automation, robotics and cybernetics as they continue to replace the traditional production systems. The book also covers issues related to the use of multi-servicing in the operational management of the industrial production and its scheduling systems.

Download or read book The Planning and Scheduling of Production Systems written by Abdelhakim Artiba and published by Springer Science & Business Media. This book was released on 1996-12-31 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: If one accepts the premise that there is no wealth without production, whether at the individual or national level, one is immediately led to the conclusion that the study of productive systems lies at the forefront of subjects that should be intensively, as well as rationally and extensively, studied to achieve the desired 'sustainable growth' of society, where the latter is defined as growth in the quality of life that does not waste the available resources in the long run. Since the end of World War II there has been a remarkable evolution in thinking about production, abetted to a large measure by the nascent field of informatics: the computer technology and the edifices that have been built around it, such as information gathering and dissemination worldwide through communication networks, software products, peripheral interfaces, etc. Additionally, the very thought processes that guide and motivate studies in production have undergone fundamental changes which verge on being revolutionary, thanks to developments in operations research and cybernetics.

Download or read book Production Planning and Scheduling in a Flexible Manufacturing System Environment written by Soumen Ghosh and published by . This book was released on 1987 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scheduling in Industry 4 0 and Cloud Manufacturing written by Boris Sokolov and published by Springer Nature. This book was released on 2020-06-08 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has resulted from the activities of IFAC TC 5.2 “Manufacturing Modelling for Management and Control”. The book offers an introduction and advanced techniques of scheduling applications to cloud manufacturing and Industry 4.0 systems for larger audience. This book uncovers fundamental principles and recent developments in the theory and application of scheduling methodology to cloud manufacturing and Industry 4.0. The purpose of this book is to present recent developments in scheduling in cloud manufacturing and Industry 4.0 and to systemize these developments in new taxonomies and methodological principles to shape this new research domain. This book addresses the needs of both researchers and practitioners to uncover the challenges and opportunities of scheduling techniques’ applications to cloud manufacturing and Industry 4.0. For the first time, it comprehensively conceptualizes scheduling in cloud manufacturing and Industry 4.0 systems as a new research domain. The chapters of the book are written by the leading international experts and utilize methods of operations research, industrial engineering and computer science. Such a multi-disciplinary combination is unique and comprehensively deciphers major problem taxonomies, methodologies, and applications to scheduling in cloud manufacturing and Industry 4.0.

Download or read book Production planning for flexible manufacturing systems written by Alwin G. Oerlemans and published by . This book was released on 1992 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook on Scheduling written by Jacek Blazewicz and published by Springer. This book was released on 2019-04-25 with total page 839 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a theoretical and application-oriented analysis of deterministic scheduling problems in advanced planning and computer systems. The text examines scheduling problems across a range of parameters: job priority, release times, due dates, processing times, precedence constraints, resource usage and more, focusing on such topics as computer systems and supply chain management. Discussion includes single and parallel processors, flexible shops and manufacturing systems, and resource-constrained project scheduling. Many applications from industry and service operations management and case studies are described. The handbook will be useful to a broad audience, from researchers to practitioners, graduate and advanced undergraduate students.

Download or read book The Planning and Scheduling of Production Systems written by Abdelhakim Artiba and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: If one accepts the premise that there is no wealth without production, whether at the individual or national level, one is immediately led to the conclusion that the study of productive systems lies at the forefront of subjects that should be intensively, as well as rationally and extensively, studied to achieve the desired 'sustainable growth' of society, where the latter is defined as growth in the quality of life that does not waste the available resources in the long run. Since the end of World War II there has been a remarkable evolution in thinking about production, abetted to a large measure by the nascent field of informatics: the computer technology and the edifices that have been built around it, such as information gathering and dissemination worldwide through communication networks, software products, peripheral interfaces, etc. Additionally, the very thought processes that guide and motivate studies in production have undergone fundamental changes which verge on being revolutionary, thanks to developments in operations research and cybernetics.

Download or read book Flexible Manufacturing Systems Recent Developments written by A. Raouf and published by Elsevier. This book was released on 1995-02-09 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible Manufacturing Systems (FMS) involve substituting machines capable of performing a wide and redefinable variety of tasks for machines dedicated to the performance of specific tasks. FMS can also be programmed to handle new products, thus extending the machines' life cycles. Thus they represent a change from "standardized goods produced by customized machines" to "customized goods produced by standardized machines". This volume contains new and updated material in this field, and will be of great interest to researchers, managers and students concerned with problems related to flexible manufacturing systems.

Download or read book Lean RFS Repetitive Flexible Supply written by Ian Fraser Glenday and published by CRC Press. This book was released on 2018-07-31 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: Is it possible to be repetitive and flexible at the same time? Using proven examples and quantifiable evidence, Lean RFS (Repetitive Flexible Supply): Putting the Pieces Together demonstrates that repetitive flexible supply (RfS) is not only possible, but that its implementation can help you reach a new level of improved performance in manufacturin

Download or read book Artificial Intelligence Applications and Innovations written by Ilias Maglogiannis and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 17th IFIP WG 12.5 International Conference on Artificial Intelligence Applications and Innovations, AIAI 2021, held virtually and in Hersonissos, Crete, Greece, in June 2021. The 50 full papers and 11 short papers presented were carefully reviewed and selected from 113 submissions. They cover a broad range of topics related to technical, legal, and ethical aspects of artificial intelligence systems and their applications and are organized in the following sections: adaptive modeling/ neuroscience; AI in biomedical applications; AI impacts/ big data; automated machine learning; autonomous agents; clustering; convolutional NN; data mining/ word counts; deep learning; fuzzy modeling; hyperdimensional computing; Internet of Things/ Internet of energy; machine learning; multi-agent systems; natural language; recommendation systems; sentiment analysis; and smart blockchain applications/ cybersecurity. Chapter "Improving the Flexibility of Production Scheduling in Flat Steel Production Through Standard and AI-based Approaches: Challenges and Perspective" is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.

Download or read book Flexible Production Indices written by and published by . This book was released on 1987 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Flexible Manufacturing Systems written by Zubair M. Mohamed and published by Routledge. This book was released on 2018-07-27 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1994 this book undertakes a comprehensive study dealing with the effects of machine flexibility, tool magazine capacity, varying production demands and different oeprating policies on the production planning problems. Performance measures such as FMS flexibility, makespan and inventory are used in evaluating the effects. Three measures of FMS flexibility - actual routing flexibility, potential routing flexibility and capacity flexibility are defined and operationalized.