Download or read book Remanufacturing Initiation for Original Equipment Manufacturers written by Johan Vogt Duberg and published by Linköping University Electronic Press. This book was released on 2024-04-29 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Remanufacturing is an industrial process in which a core – a used, discarded, or broken product – is transformed into a product with a like-new specification and condition. However, to this date, remanufacturing activities on the market are few compared to manufacturing. There are several types of remanufacturers; the least common type is the original equipment remanufacturer, an original equipment manufacturer that not only manufactures new products but also remanufactures cores of its own products. Remanufacturing is potentially becoming a more widely used industrial process for original equipment manufacturers, and increased remanufacturing activities can positively contribute to the environment. The contribution comes from a reduction of raw material and energy consumption compared to manufacturing. Therefore, remanufacturing has the potential to decouple environmental impact from economic growth, thus contributing to more sustainable societies. However, assessing the benefits of remanufacturing does not directly correlate to growth within the remanufacturing industry. To encapsulate the environmental, social, and economic benefits of remanufacturing, manufacturers need to be aware of how remanufacturing can be initiated and implemented in practice. Therefore, the objective of this dissertation is to develop support measures for original equipment manufacturers to initiate profitable remanufacturing. This research takes a stand in case study and transdisciplinary research where the initiation of profitable remanufacturing is studied at two original equipment manufacturers. The research study developed knowledge of how remanufacturing could be incorporated into existing operations at original equipment manufacturers. In parallel, financial assessments based on cost-benefit analysis were built to measure how well the case companies could perform remanufacturing. For the case study research, seven remanufacturing scenarios were developed, ranging from centralised remanufacturing performed by the original equipment manufacturer to decentralised performed at multiple locations using a retail network. Which scenario is preferable depends on, for example, risk-consciousness, cooperation between actors, and volume targets. However, given ideal circumstances, remanufacturing in-house in a centralised scenario was shown to be the most beneficial for the investigated original equipment manufacturer since the fewer middle hands and economies of scale also potentially enable lower costs. For the transdisciplinary research, the remanufacturing initiation was business model-centric, meaning that the remanufacturing system was a consequence of a decision for a specific business model. Here, a scenario-based analysis was developed to understand under which circumstances the business model with remanufacturing was more lucrative for the provider – the original equipment manufacturer – and less costly for the users – the customers. For this, a systematic assessment approach was developed consisting of three steps: (1) provide a cost overview for each business model, (2) create scenarios by modifying the cost drivers, and (3) combine scenarios to reach synergetic effects. Based on the case study, two sets of four prerequisites for initiating remanufacturing were derived. These are divided into essential and supporting prerequisites and illustrated through a framework called the Remanufacturing Rocket. The essential prerequisites highlight fundamental requirements to perform remanufacturing. Should one of these four factors be missing, remanufacturing cannot be successfully initiated. The supporting prerequisites are valuable to enhance the effectiveness and efficiency of the process, such as through streamlined operations, organisational change, or information exchange. Hence, to reach the fullest potential of remanufacturing, both the essential and the supporting prerequisites are needed. Furthermore, the area of financial assessments was explored in a systematic literature review to identify insights for developing such assessments tailored for individual original equipment manufacturers in initiating remanufacturing. For this, six perspectives for framing financial assessments are proposed. These cover the system boundaries for the assessments as well as the individual needs and visions of original equipment manufacturers. Additionally, a framework was developed to select financial assessment models for remanufacturing initiations based on ease of use and capability to handle complex datasets. Conclusively, it is proposed to apply the prerequisites for initiating remanufacturing together with a financial assessment in an iterative manner to investigate the profitability for original equipment manufacturers to initiate remanufacturing. The essential prerequisites influence the first iteration of the financial assessment, which then contributes to refinements of how the essential prerequisites should be aligned in an economically preferable way. Once satisfactory, another iterative process could be initiated between the supporting prerequisites and the financial assessment. By using the proposed approach, the prospects of profitable remanufacturing could be thoroughly investigated before attempting to initiate a process in practice, thus reducing the number of resources spent in vain. Additionally, the iterative process was integrated into a 5-step Approach For Initiating Remanufacturing (5AFIR) to guide original equipment manufacturers towards initiating profitable remanufacturing. Refabrikation (oder Wiederaufbereitung, engl. Remanufacturing) ist ein industrieller Prozess, bei dem ein Altteil – ein gebrauchtes, ausrangiertes, verschlissenes oder defektes Produkt – gemäß den Herstellerspezifikationen in einen neuwertigen Zustand gebracht wird. Heutzutage macht Refabrikation allerdings nur einen kleinen Teil der Fertigungsindustrie aus. Verschiedene Arten von Unternehmen betreiben Refabrikation, wobei Originalgerätehersteller, sogenannte OEMs (engl. für Original Equipment Manufacturer), am seltensten sind. Solche OEMs betreiben neben Produktion auch eine Wiederaufbereitung ihrer eigenen Produkte. Refabrikation kann sowohl ökologische als auch ökonomische Vorteile bringen und hat somit grundsätzlich hohes Marktpotential. Der geringere Rohstoff- und Energieverbrauch von Refabrikation im Vergleich zu Neuproduktion ist ein Beispiel für ökologischen Vorteil. Refabrikation ermöglicht außerdem, negative Umweltauswirkungen durch Produktion und Wirtschaftswachstum voneinander unabhängig zu machen und trägt somit zu nachhaltigem Wachstum bei. Allerdings hängt der Nutzen von Refabrikation nicht direkt mit dem Wachstum innerhalb der Refabrikationsbranche zusammen. Um die ökologischen, sozialen und ökonomischen Vorteile nutzen zu können, müssen Hersteller Kompetenz zur praktischen Umsetzung von Refabrikation aufbauen. Ziel dieser Dissertation ist daher die Entwicklung von Unterstützungsmaßnahmen und -konzepten für OEMs, die zu profitabler Refabrikation führen. Diese Arbeit basiert auf einer Fallstudie und auf transdisziplinärer Forschung, bei der die Einführung von profitabler Refabrikation bei zwei OEMs untersucht wurde. Die Fallstudie lieferte Erkenntnisse darüber, wie Refabrikation in bestehende Abläufe bei OEMs integriert werden kann. Außerdem wurden finanzielle Bewertungskriterien auf der Grundlage einer Kosten-Nutzen-Analyse erstellt, um messen zu können, wie erfolgreich die untersuchten Unternehmen Refabrikation implementieren könnten. Für die Fallstudie wurden sieben Refabrikationsszenarien entwickelt, die von zentraler Refabrikation durch das OEM bis zu dezentraler Refabrikation an mehreren Standorten durch ein Netzwerk von Niederlassungen reichen. Welches der Szenarien vorzuziehen ist, hängt beispielsweise vom Risikobewusstsein, der Zusammenarbeit der Akteure und den angestrebten Stückzahlen ab. Unter idealen Umständen erwies sich die unternehmensinterne Refabrikation mit zentralisierter Struktur als das vorteilhafteste Szenario. Für die untersuchten OEMs führten weniger Zwischenhändler und Größenvorteile zu geringeren Kosten. In der transdisziplinären Forschung dieser Dissertation wurde davon ausgegangen, dass das Refabrikationssystem aus der Entscheidung für ein bestimmtes Geschäftsmodell folgt. Basierend auf verschiedenen Szenarien wurde analysiert, unter welchen Umständen das Geschäftsmodell inklusive Refabrikation für den Anbieter (OEM) lukrativer und für die Anwender (Kunden) kostengünstiger war. Hierzu wurde ein systematisches Bewertungsschema entwickelt, das aus drei Schritten besteht: (1) Bereitstellung einer Kostenübersicht für jedes Geschäftsmodell, (2) Erstellung von Szenarien durch Modifikation der Kostentreiber und (3) Kombination von Szenarien, um Synergieeffekte zu erzielen. Anforderungen für die Einführung von Refabrikation wurden auf Basis der Fallstudie abgeleitet. Diese sind in vier essentielle und vier unterstützende Anforderungen eingeteilt und werden durch ein Modell namens Refabrikationsrakete veranschaulicht. Die essentiellen Anforderungen sind grundlegend für die Durchführung von Refabrikation. Ist eine dieser vier Anforderungen nicht erfüllt, kann Refabrikation nicht erfolgreich umgesetzt werden. Die unterstützenden Anforderungen steigern die Effektivität und Effizienz des Einführungsprozesses, beispielsweise durch optimierte Abläufe, organisatorische Änderungen oder Informationsaustausch. Um das volle Potenzial von Refabrikation auszuschöpfen, müssen sowohl die essentiellen als auch die unterstützenden Anforderungen erfüllt werden. Wirtschaftliche Bewertungskriterien wurden im Rahmen einer systematischen Literaturrecherche betrachtet. Ziel der Recherche war es, Erkenntnisse für die Entwicklung solcher Bewertungskriterien zu erlangen. Die Kriterien sollen dabei auf einzelne OEMs und die Einführung von Refabrikation zugeschnitten sein. In dieser Arbeit werden sechs Ansätze für die Entwicklung wirtschaftlicher Bewertungskriterien vorgeschlagen. Diese Ansätze behandeln sowohl Systemgrenzen für die Bewertungskriterien als auch individuelle Bedürfnisse und Ziele der OEM. Darüber hinaus wurde ein Rahmenwerk entwickelt, um wirtschaftliche Bewertungskriterien auf Basis ihrer Benutzerfreundlichkeit und ihrer Fähigkeit zur Bewältigung komplexer Datenmengen auszuwählen. Abschließend wird vorgeschlagen, die Anforderungen für die Einführung von Refabrikation zusammen mit einer wirtschaftlichen Bewertung iterativ zu prüfen, um die Rentabilität von Refabrikation für OEMs zu analysieren. Die essentiellen Anforderungen beeinflussen die erste Iterationsschleife der wirtschaftlichen Bewertung. In dieser ersten Schleife wird verfeinert, wie die Grundanforderungen wirtschaftlich sinnvoll kombiniert werden können. Es folgt eine zweite Iterationsschleife zwischen den unterstützenden Anforderungen und der finanziellen Bewertung. Mit diesem Vorgehen kann das Potential einer rentablen Refabrikation gründlich untersucht werden bevor mit der Realisierung begonnen wird. Dadurch können eventuell erfolglose Einführungsversuche vermieden und vergeblich aufgewendete Ressourcen reduziert werden. Der iterative Prozess wurde in einen 5-stufigen Modell zur Einführung von Refabrikation (5AFIR) zusammengefasst. Återtillverkning är en industriell process där en stomme – en använd, uttjänt eller trasig produkt – omformas till en produkt vars specifikation och kvalitet motsvarar nyskick. Idag utgör återtillverkning endast en liten del av den totala tillverkningsindustrin. Det finns flera typer av återtillverkare; den ovanligaste är originaltillverkande återtillverkare, det vill säga, ett tillverkande företag som även återtillverkar sina egna produkter. Genom den låga grad av återtillverkning bland originaltillverkare idag finns det utrymme för att verka för en ökning. En sådan ökning kan bidra till miljömässiga fördelar genom att mängden råmaterial och energi reduceras jämfört med nytillverkning. Det finns därför en möjlighet för återtillverkning att bidra till en frikoppling av miljömässig påverkan från ekonomisk tillväxt, vilket i sin tur bidrar till ett mer hållbart samhälle. Fast att endast värdera nyttan av återtillverkning leder inte direkt till en tillväxt inom återtillverkningsindustrin. För att omfamna de miljömässiga, sociala och ekonomiska nyttor som återtillverkning kan bidra med måste originaltillverkare vara medvetna om hur återtillverkning kan initieras och implementeras i praktiken på ett ekonomiskt lönsamt sätt. Denna doktorsavhandlings syfte är därför att utveckla stöd för originaltillverkare att initiera lönsam återtillverkning. Forskningen utgår från en fallstudie och transdisciplinär forskningsmetodik där initieringen av lönsam återtillverkning studeras vid två originaltillverkare. Den utförda forskningen utvecklade kunskap om hur återtillverkning kan integrerats i en originaltillverkares befintliga verksamhet. Parallellt med detta utvecklades ekonomiska utvärderingsmetoder för att tillhandahålla ett mått på hur väl fallföretagen skulle kunna utföra återtillverkning. För fallstudien utvecklades det sju återtillverkningsscenarion som sträcker sig från centraliserad återtillverkning, som utförs av originaltillverkaren, till decentraliserad, som utförs vid flertalet platser inom ett återförsäljarnätverk. Vilket scenario som var mest fördelaktigt berodde exempelvis på riskmedvetenhet, samarbete mellan aktörer, och tillverkningsvolym. Men givet ideala förhållanden visades det att centraliserad återtillverkning vore potentiellt mest fördelaktigt för fallföretaget, eftersom färre mellanhänder och stordriftsfördelar möjliggör lägre kostnader. För det andra fallföretagets initieringen av återtillverkning vid tillämpning av den transdisciplinära forskningsmetodiken var det ett affärsmodellsfokus, vilket innebar att återtillverkningssystemet var en konsekvens av ett beslut för en viss affärsmodell. I denna del av forskningen utvecklades en scenariobaserad analysmetod för att förstå under vilka förhållanden som affärsmodellen tillsammans med återtillverkning vore mer lukrativt för företaget – originaltillverkaren – och mindre kostsamt för användaren – kunden. För detta utvecklades en systematisk ansats för ekonomiska utvärderingar bestående av tre steg: (1) tillhandahåll en kostnadsöverblick för varje affärsmodell, (2) skapa scenarion genom att modifiera kostnadsdrivarna, och (3) kombinera scenarion för att uppnå synergieffekter. Med utgångspunkt i fallstudien utvecklades även faktorer för att forma krav för hur originaltillverkare kan initiera återtillverkning. Dessa faktorer delas upp i grundläggande och stödjande kravställningar, och de bygger tillsammans upp ett ramverk benämnt Återtillverkningsraketen. De grundläggande kravställningarna lyfter fram elementära krav vid utförandet av återtillverkning och om en av de fyra skulle saknas kan återtillverkning inte utföras på ett framgångsrikt sätt. De stödjande kravställningarna är av värde för att förbättra återtillverkningseffektiviteten genom exempelvis bekymmersfritt utförande av processer, organisationsförändringar, eller informationsutbyten. Därigenom, för att nå den fulla potentialen av återtillverkning, behövs både de grundläggande och de stödjande kravställningarna. Dessutom utforskades området för ekonomiska utvärderingsmetoder i en systematisk litteraturgenomgång för att identifiera insikter för att utveckla sådana metoder skräddarsydda för individuella originaltillverkare som initierar återtillverkning. För ändamålet föreslås sex perspektiv för att forma ekonomiska utvärderingsmetoder. Dessa täcker såväl systemgränserna för utvärderingarna som individuella behov och visioner hos originaltillverkare. För att vidare stödja företagen utvecklades ett ramverk för att välja ekonomiska utvärderingsmetoder för initieringar av återtillverkning baserat på användarvänlighet och förmåga att hantera komplexa datamängder. Slutligen föreslås det att tillämpa de framtagna kravställningarna tillsammans med ekonomisk utvärdering genom att iterativt undersöka möjligheterna för hur återtillverkning kan initieras för originaltillverkare. De grundläggande kravställningarna influerar upplägget för den första iterationen av den ekonomiska utvärderingen, vilken i sin tur nyttjas för att förfina hur de grundläggande kravställningarna kan läggas samman på ett ekonomiskt fördelaktigt sätt. När en godtagbar nivå uppnåtts kan ytterligare en iterativ process utföras mellan de stödjande kravställningarna och den ekonomiska värderingen. Genom att tillämpa det föreslagna tillvägagångssättet kan möjligheterna för återtillverkning undersökas på en detaljerad nivå innan initieringsförsök i praktiken, och såldes kan mängden slösade resurser minskas. Utöver detta integrerades det iterativa tillvägagångssättet med en 5-stegsansats för initiering av återtillverkning (5AFIR).
Download or read book Circular Economy for the Management of Operations written by Anil Kumar and published by CRC Press. This book was released on 2020-12-15 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Circular-Economy is a new concept in operations management. Its goal is to redefine growth, focusing on positive benefits arising for society as a whole out of efficiencies such as designing waste out the operations process. This book will help practitioners use the proper strategy for effective adoption of Circular practices to use in their organization. Features: Provides a complete understanding of Circular-Economy practices Offers advanced mathematical models to help industry management adopt the correct practices Presents a deep understanding of cross-functional and customer-focused design thinking Covers how to develop sustainable practices in all types of activities within operations management. Circular Economy for the Management of Operations will be of interest to practitioners and researchers in engineering as well as business management
Download or read book Closed Loop Supply Chains written by Mark E. Ferguson and published by CRC Press. This book was released on 2010-04-21 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Closed-loop supply chain activities such as remanufacturing, recycling, dismantling for spare parts, and reverse logistics have helped many companies tap into new revenue streams by finding secondary markets for their products, all while reducing their overall carbon footprint. Written by academic experts, in language that is accessible to practitioners, this authoritative resource examines recent research and case studies of companies running profitable reuse/remanufacture operations in various industries. It illustrates profitable practices in returned and recovered products, clearly explaining how to: design a reverse logistics network, conduct production planning, implement effective marketing strategies, and apply closed-loop supply chain strategies in industries besides manufacturing. From product development to materials to assembly and profitability, this complete resource explores the impact of these processes across all aspects of the supply chain.
Download or read book Next Generation Supply Chains written by Rosanna Fornasiero and published by Springer Nature. This book was released on 2020-12-31 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book explores supply chains strategies to help companies face challenges such as societal emergency, digitalization, climate changes and scarcity of resources. The book identifies industrial scenarios for the next decade based on the analysis of trends at social, economic, environmental technological and political level, and examines how they may impact on supply chain processes and how to design next generation supply chains to answer these challenges. By mapping enabling technologies for supply chain innovation, the book proposes a roadmap for the full implementation of the supply chain strategies based on the integration of production and logistics processes. Case studies from process industry, discrete manufacturing, distribution and logistics, as well as ICT providers are provided, and policy recommendations are put forward to support companies in this transformative process.
Download or read book Closed Loop Supply Chains written by Mark E. Ferguson and published by CRC Press. This book was released on 2010-04-21 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Closed-loop supply chain activities such as remanufacturing, recycling, dismantling for spare parts, and reverse logistics have helped many companies tap into new revenue streams by finding secondary markets for their products, all while reducing their overall carbon footprint. Written by academic experts, in language that is accessible to practitioners, this authoritative resource examines recent research and case studies of companies running profitable reuse/remanufacture operations in various industries. It illustrates profitable practices in returned and recovered products, clearly explaining how to: design a reverse logistics network, conduct production planning, implement effective marketing strategies, and apply closed-loop supply chain strategies in industries besides manufacturing. From product development to materials to assembly and profitability, this complete resource explores the impact of these processes across all aspects of the supply chain.
Download or read book Production at the leading edge of technology written by Bernd-Arno Behrens and published by Springer Nature. This book was released on 2020-09-24 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: This congress proceedings provides recent research on leading-edge manufacturing processes. The aim of this scientific congress is to work out diverse individual solutions of "production in the border area" and transferable methodological approaches. In addition, guest speakers with different backgrounds will give the congress participants food for thoughts, interpretations, views and suggestions. The manufacturing industry is currently undergoing a profound structural change, which on the one hand produces innovative solutions through the use of high-performance communication and information technology, and on the other hand is driven by new requirements for goods, especially in the mobility and energy sector. With the social discourse on how we should live and act primarily according to guidelines of sustainability, structural change is gaining increasing dynamic. It is essential to translate politically specified sustainability goals into socially accepted and marketable technical solutions. Production research is meeting this challenge and will make important contributions and provide innovative solutions from different perspectives.
Download or read book Managing Closed Loop Supply Chains written by Simme D.P. Flapper and published by Springer Science & Business Media. This book was released on 2006-03-06 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Closed-Loop Supply Chains (CLSC) offer companies a unique opportunity to improve their profits whilst serving societal responsibility. The management of CLSC differs in a number of ways from managing supply chains in general. The book examines these differences and how these differences may be dealt with in practice, by offering a concrete framework, introducing the different aspects related to CLSC and their mutual relations, in a systematic logical way as well as cases clustered according to the inputs for a CLSC. The framework and especially the cases from successful companies offer the reader an invaluable help to build and improve CLSC.
Download or read book Strategic Planning Models for Reverse and Closed Loop Supply Chains written by Kishore K. Pochampally and published by CRC Press. This book was released on 2008-09-22 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid technological development of new products, coupled with the growing consumer desire for the latest technology, has led to a new environmental problem: products that are discarded prematurely. But behind every problem lies an opportunity. Many of these products can be reprocessed, leading to savings in natural resources, energy, landfill s
Download or read book Operations Rules written by David Simchi-Levi and published by MIT Press. This book was released on 2010-09-24 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: An expert offers a set of rules that will help managers achieve dramatic improvements in operations performance. In recent years, management gurus have urged businesses to adopt such strategies as just-in-time, lean manufacturing, offshoring, and frequent deliveries to retail outlets. But today, these much-touted strategies may be risky. Global financial turmoil, rising labor costs in developing countries, and huge volatility in the price of oil and other commodities can disrupt a company's entire supply chain and threaten its ability to compete. In Operations Rules, David Simchi-Levi identifies the crucial element in a company's success: the link between the value it provides its customers and its operations strategies. And he offers a set of scientifically and empirically based rules that management can follow to achieve a quantum leap in operations performance. Flexibility, says Simchi-Levi, is the single most important capability that allows firms to innovate in their operations and supply chain strategies. A small investment in flexibility can achieve almost all the benefits of full flexibility. And successful companies do not all pursue the same strategies. Amazon and Wal-Mart, for example, are direct competitors but each focuses on a different market channel and provides a unique customer value proposition—Amazon, large selection and reliable fulfillment; Wal-Mart, low prices—that directly aligns with its operations strategy. Simchi-Levi's rules—regarding such issues as channels, price, product characteristics, value-added service, procurement strategy, and information technolog—-transform operations and supply chain management from an undertaking based on gut feeling and anecdotes to a science.
Download or read book Design of Flexible Production Systems written by Tullio Tolio and published by Springer Science & Business Media. This book was released on 2008-12-11 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade, the production of mechanical components to be assembled in final products produced in high volumes (e.g. cars, mopeds, industrial vehicles, etc.) has undergone deep changes due to the overall modifications in the way companies compete. Companies must consider competitive factors such as short lead times, tight product tolerances, frequent market changes and cost reduction. Anyway, companies often have to define production objectives as trade-offs among these critical factors since it can be difficult to improve all of them. Even if system flexibility is often considered a fundamental requirement for firms, it is not always a desirable characteristic of a system because it requires relevant investment cost which can jeopardize the profitability of the firm. Dedicated systems are not able to adapt to changes of the product characteristics while flexible systems offer more flexibility than what is needed, thus increasing investment and operative costs. Production contexts characterized by mid to high demand volume of well identified families of products in continuous evolution do not require the highest level of flexibility; therefore, manufacturing system flexibility must be rationalized and it is necessary to find out the best trade-off between productivity and flexibility by designing manufacturing systems endowed with the right level of flexibility required by the production problem. This new class of production systems can be named Focused Flexibility Manufacturing Systems-FFMSs. The flexibility degree in FFMSs is related to their ability to cope with volume, mix and technological changes, and it must take into account both present and future changes. The required level of system flexibility impacts on the architecture of the system and the explicit design of flexibility often leads to hybrid systems, i.e. automated integrated systems in which parts can be processed by both general purpose and dedicated machines. This is a key issue of FFMSs and results from the matching of flexibility and productivity that respectively characterize FMSs and Dedicated Manufacturing Systems (DMSs). The market share of the EU in the machine tool sector is 44%; the introduction of focused flexibility would be particularly important for machine tool builders whose competitive advantage is based on the ability of customizing their systems on the basis of needs of their customers. In fact, even if current production contexts frequently present situations which would fit well with the FFMS approach, tradition and know-how of machine tool builders play a crucial role. Firms often agree with the focused flexibility vision, nevertheless they decide not to pay the risk and efforts related to the design of this new system architecture. This is due also to the lack of well-structured design approaches which can help machine tool builders to configure innovative systems. Therefore, the FFMS topic is studied through the book chapters following a shared mission: "To define methodologies and tools to design production systems with a minimum level of flexibility needed to face, during their lifecycle, the product and process evolution both in the technological and demand aspects. The goal is to find out the optimal trade-off between flexibility and productivity". The book framework follows the architecture which has been developed to address the FFMS Design problem. This architecture is both broad and detailed, since it pays attention to all the relevant levels in a firm hierarchy which are involved in the system design. Moreover, the architecture is innovative because it models both the point of view of the machine tool builder and the point of view of the system user. The architecture starts analyzing Manufacturing Strategy issues and generating the possible demand scenario to be faced. Technological aspects play a key role while solving process plan problems for the products in the part family. Strategic and technological data becomes input when a machine tool builder performs system configuration. The resulting system configurations are possible solutions that a system user considers when planning its system capacity. All the steps of the architecture are deeply studied, developing methods and tools to address each subproblem. Particular attention is paid to the methodologies adopted to face the different subproblems: mathematical programming, stochastic programming, simulation techniques and inverse kinematics have been used. The whole architecture provides a general approach to implement the right degree of flexibility and it allows to study how different aspects and decisions taken in a firm impact on each other. The work presented in the book is innovative because it gives links among different research fields, such as Manufacturing Strategy, Process Plan, System Design, Capacity Planning and Performance Evaluation; moreover, it helps to formalize and rationalize a critical area such as manufacturing system flexibility. The addressed problem is relevant at an academic level but, also, at an industrial level. A great deal of industrial sectors need to address the problem of designing systems with the right degree of flexibility; for instance, automotive, white goods, electrical and electronic goods industries, etc. Attention to industrial issues is confirmed by empirical studies and real case analyses which are presented within the book chapters.
Download or read book Surviving Supply Chain Integration written by National Research Council and published by National Academies Press. This book was released on 2000-03-23 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: The managed flow of goods and information from raw material to final sale also known as a "supply chain" affects everythingâ€"from the U.S. gross domestic product to where you can buy your jeans. The nature of a company's supply chain has a significant effect on its success or failureâ€"as in the success of Dell Computer's make-to-order system and the failure of General Motor's vertical integration during the 1998 United Auto Workers strike. Supply Chain Integration looks at this crucial component of business at a time when product design, manufacture, and delivery are changing radically and globally. This book explores the benefits of continuously improving the relationship between the firm, its suppliers, and its customers to ensure the highest added value. This book identifies the state-of-the-art developments that contribute to the success of vertical tiers of suppliers and relates these developments to the capabilities that small and medium-sized manufacturers must have to be viable participants in this system. Strategies for attaining these capabilities through manufacturing extension centers and other technical assistance providers at the national, state, and local level are suggested. This book identifies action steps for small and medium-sized manufacturersâ€"the "seed corn" of business start-up and developmentâ€"to improve supply chain management. The book examines supply chain models from consultant firms, universities, manufacturers, and associations. Topics include the roles of suppliers and other supply chain participants, the rise of outsourcing, the importance of information management, the natural tension between buyer and seller, sources of assistance to small and medium-sized firms, and a host of other issues. Supply Chain Integration will be of interest to industry policymakers, economists, researchers, business leaders, and forward-thinking executives.
Download or read book Industrial Production Management in Flexible Manufacturing Systems written by Dima, Ioan Constantin and published by IGI Global. This book was released on 2013-01-31 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Production Management in Flexible Manufacturing Systems addresses the present discussions surrounding flexible production systems based on automation, robotics and cybernetics as they continue to replace the traditional production systems. The book also covers issues related to the use of multi-servicing in the operational management of the industrial production and its scheduling systems.
Download or read book Strategic Fuzzy Extensions and Decision making Techniques written by Kamal Kumar and published by CRC Press. This book was released on 2024-07-31 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of a novel correlation coefficient of linguistic intuitionistic fuzzy sets to medical diagnosis problems provides the topic for Strategic Fuzzy Extensions and Decision-making Techniques. It further explains neutrosophic cubic set-based aggregation operators for library ranking systems, and techniques for order performance by similarity to ideal solution. The text also introduces the new aggregation operators, similarity measures, and distance measures for the fuzzy sets and their extensions. This book: Introduces the new aggregation operators, similarity measures, and distance measures for the fuzzy sets and their extensions. Covers recent studies in the field of fuzzy optimization and decision making such as advanced decision-making algorithms. Highlights the application in the field of image processing and pattern recognition. Presents a technique for order performance by similarity to an ideal solution and VIKOR method for decision-making. Explores the limitations of existing fuzzy decision-making approaches such as the malfunctioning of existing formulations. It is primarily written for senior undergraduate, graduate students, and academic researchers in fields including industrial engineering, manufacturing engineering, production engineering, mechanical engineering, and engineering mathematics.
Download or read book Advanced Manufacturing and Supply Chain with IoT written by and published by BPB Publications. This book was released on 2024-02-20 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mastering the art of leveraging IoT for industry transformation KEY FEATURES ● Learn IoT principles, strategies, and tech for advanced manufacturing and supply chain. ● Understand IoT's role in enhancing competitiveness and innovation. ● Gain insights through real-world case studies and practical examples. DESCRIPTION In the world of industrial manufacturing and supply chain, the lack of real-time visibility and insights into processes poses a significant challenge. However, IoT is set to bring about a profound transformation. This technological revolution promises efficiency gains, operational optimization, and unprecedented business insights. Step into the world of Industry 4.0 and 5.0 with IoT and discover how it revolutionizes production and logistics. Learn about real-time monitoring, predictive maintenance, and quality control while ensuring a secure IoT infrastructure. Explore practical examples in manufacturing, including smart factories, personalized transit, and sustainability practices. Use the potential of AI, predictive analytics, and 3D printing to align your IoT strategies with business goals for enhanced performance. Completing this book equips readers to excel in leveraging IoT for industrial manufacturing and supply chain advancements. They will master IoT concepts, optimize processes, and handle integration challenges. With the acquired knowledge, readers can develop strong IoT strategies, assess project outcomes effectively, and introduce significant improvements to their manufacturing and supply chain operations. WHAT YOU WILL LEARN ● Understanding IoT's role in advanced manufacturing and supply chain. ● Applying IoT for real-time monitoring and predictive maintenance. ● Enhancing production efficiency through IoT-driven solutions. ● Leveraging IoT for supply chain optimization and transparency. ● Overcoming IoT implementation challenges and ensuring security. ● Exploring the future possibilities of IoT and AI in manufacturing. WHO THIS BOOK IS FOR This book is intended for manufacturing, supply chain management, and IoT specialists and enthusiasts with intermediate to advanced knowledge of IoT and its industrial applications. TABLE OF CONTENTS 1. IoT Fundamentals, Architecture, and Protocols 2. Embracing IoT in Manufacturing 3. The Power of IoT in Supply Chain 4. IoT: Use Cases in Smart Factories 5. Business Factors and Optimization for IoT Implementation 6. Challenges and Solutions 7. Artificial Intelligence in Manufacturing 8. The Future of IoT 9. Key Takeaways
Download or read book Practical Pharmaceutics written by Paul Le Brun and published by Springer Nature. This book was released on 2023-06-15 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Pharmaceutics contains essential knowledge on the preparation, quality control, logistics, dispensing and use of medicines. It features chapters written by experienced pharmacists and scientists working in hospitals, academia and industry throughout Europe, including practical examples as well as information on current GMP and GMP-based guidelines and EU-legislation. In this second edition all chapters have been updated with numerous new as well as didactically revised illustrations and tables. A completely new chapter about therapeutic proteins and Advanced Therapy Medicinal Products was added. From prescription to production, from usage instructions to procurement and the impact of medicines on the environment, the book provides step-by-step coverage that will help a wide range of readers, students as well as professionals. It offers product knowledge for all pharmacists working directly with patients and it will enable them to make the required medicine available, to store medicines properly, to adapt medicines if necessary and to dispense medicines with the appropriate information for patients as well as caregivers about product care and how to maintain the quality of the product. The basic knowledge presented in the book will also be valuable for industrial pharmacists to remind and focus them on the application of the medicines manufactured. The basic and practical knowledge on the design, preparation and quality management of medicines can directly be applied by the pharmacists whose main duty is production in community and hospital pharmacies and in industry. Undergraduate as well as graduate pharmacy students will find knowledge presented in a coherent way and fully supported with relevant examples. Practical Pharmaceutics has become a reliable and recognised source for the acquisition of pharmaceutical-technological knowledge. The book is used in the curriculum of a number of international universities and schools of Pharmacy.
Download or read book Big Data Analytics written by Kiran Chaudhary and published by CRC Press. This book was released on 2021-12-27 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Big Data Analytics: Applications in Business and Marketing explores the concepts and applications related to marketing and business as well as future research directions. It also examines how this emerging field could be extended to performance management and decision-making. Investment in business and marketing analytics can create value through proper allocation of resources and resource orchestration process. The use of data analytics tools can be used to diagnose and improve performance. The book is divided into five parts. The first part introduces data science, big data, and data analytics. The second part focuses on applications of business analytics including: Big data analytics and algorithm Market basket analysis Anticipating consumer purchase behavior Variation in shopping patterns Big data analytics for market intelligence The third part looks at business intelligence and features an evaluation study of churn prediction models for business Intelligence. The fourth part of the book examines analytics for marketing decision-making and the roles of big data analytics for market intelligence and of consumer behavior. The book concludes with digital marketing, marketing by consumer analytics, web analytics for digital marketing, and smart retailing. This book covers the concepts, applications and research trends of marketing and business analytics with the aim of helping organizations increase profitability by improving decision-making through data analytics.
Download or read book Handbook of Research on Designing Sustainable Supply Chains to Achieve a Circular Economy written by Ramakrishna, Yanamandra and published by IGI Global. This book was released on 2023-04-17 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Securing a sustainable supply chain is crucial for business and the future of humanity. Intending to lower waste and carbon emissions, businesses are investing more money in sustainability efforts. However, sustainability measures that might save costs, improve forecasting, and optimize business operations are frequently disregarded, especially during the post-pandemic era. The Handbook of Research on Designing Sustainable Supply Chains to Achieve a Circular Economy analyzes various approaches and strategies for developing sustainable supply chain capabilities to achieve circular economies; builds and develops models, frameworks, and theoretical concepts by focusing on the role of a sustainable supply chain leading to a circular economy; and provides a platform where new concepts and plans for managing sustainable supply chains in the post-pandemic era with the aid of Industry 4.0 as enablers are discussed. Covering key topics such as tourism, healthcare, transportation, and governance, this major reference work is ideal for industry professionals, government officials, business owners, managers, entrepreneurs, policymakers, scholars, researchers, academicians, instructors, and students.