Download or read book Flexible Automation and Intelligent Manufacturing The Human Data Technology Nexus written by Kyoung-Yun Kim and published by Springer Nature. This book was released on 2023-02-03 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the second volume of the proceedings of the 31st edition of the International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2022, held on June 19 – 23, 2022, in Detroit, Michigan, USA. Covering four thematic areas including Manufacturing Processes, Machine Tools, Manufacturing Systems, and Enabling Technologies, it highlights advances in micro- and nanoscales processes, additive manufacturing, artificial intelligence and robotic applications, human-robot collaboration, as well as quality control, supply chain, industrial monitoring and management strategies. It also discusses important issues related to sustainability, waste management and remanufacturing. All in all, this book provides academicians, engineers and professionals with extensive information on both scientific and industrial advances in the converging fields of manufacturing, production, and automation.

Download or read book General Technical Report NE written by and published by . This book was released on 1980 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modeling Simulation and Control of Flexible Manufacturing Systems written by MengChu Zhou and published by World Scientific. This book was released on 1999 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: One critical barrier leading to successful implementation of flexible manufacturing and related automated systems is the ever-increasing complexity of their modeling, analysis, simulation, and control. Research and development over the last three decades has provided new theory and graphical tools based on Petri nets and related concepts for the design of such systems. The purpose of this book is to introduce a set of Petri-net-based tools and methods to address a variety of problems associated with the design and implementation of flexible manufacturing systems (FMSs), with several implementation examples.There are three ways this book will directly benefit readers. First, the book will allow engineers and managers who are responsible for the design and implementation of modern manufacturing systems to evaluate Petri nets for applications in their work. Second, it will provide sufficient breadth and depth to allow development of Petri-net-based industrial applications. Third, it will allow the basic Petri net material to be taught to industrial practitioners, students, and academic researchers much more efficiently. This will foster further research and applications of Petri nets in aiding the successful implementation of advanced manufacturing systems.

Download or read book Flexible Automation and Intelligent Manufacturing Establishing Bridges for More Sustainable Manufacturing Systems written by Francisco J. G. Silva and published by Springer Nature. This book was released on 2023-08-23 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research and developments in manufacturing, giving a special emphasis to solutions fostering automation and sustainability. Topics cover manufacturing process optimization, remanufacturing, machines and mechanical design, CAD/CAM/CAE, materials characterization and processing, measurement and predictive maintenance techniques. Further topics include artificial intelligence and IoT in manufacturing, robotics, and cutting-edge issues in Industry 4.0/5.0. Based on proceedings of the 32nd edition of the International Conference on Flexible Automation and Intelligent Manufacturing, FAIM 2023, held on June 18 – 22, 2023, in Porto, Portugal, this first volume of a 2-volume set provides academics and professionals with extensive, technical information on trends and technologies in manufacturing, yet it also discusses challenges and practice-oriented experience in all the above-mentioned areas.

Download or read book Proceedings of the 14th International Conference on Flexible Automation and Intelligent Manufacturing Vol 2 Intelligent Manufacturing written by Lihui Wang and published by NRC Research Press. This book was released on 2004 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Publications of the Northeastern Research Station written by and published by . This book was released on 2002 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Gcmm 2004 written by Prasad K. D. V. Yarlagadda and published by Alpha Science Int'l Ltd.. This book was released on 2005 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents research and case studies from over 200 Manufacturing Professionals across the globe in the area of: Manufacturing Process; Materials; Metrology; Finite Element Methods; Industrial Engineering; Optimization; Quality; and Supply Chain Management.

Download or read book New Frontiers in Applied Artificial Intelligence written by Ngoc Thanh Nguyen and published by Springer Science & Business Media. This book was released on 2008-06-03 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 21st International Conference on Industrial and Engineering Applications of Artificial Intelligence and Expert Systems, IEA/AIE 2008, held in Wroclaw, Poland, in June 2008. The 75 revised full papers presented were carefully reviewed and selected from 302 submissions. The papers are organized in topical sections on computer vision, fuzzy system applications, robot and manufacturing, data mining and KDS, neural networks, machine learning, natural language processing, internet application and education, heuristic search, application systems, agent-based system, evolutionary and genetic algorithms, knowledge management, and other applications. The book concludes with 15 contributions from the following special sessions: knowledge driven manufacturing systems, joint session on adaptive networked systems and fuzzy knowledge bases, and software agents and multi-agent systems.

Download or read book Operations Research Management Science at Work written by Erhan Kozan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principle aim of this book, entitled "Operations ResearchlManagement Science at Work", is to provide a summary snapshot of recent research in and applications of Operations Research (OR)/ Management Science (MS) in the Asia-pacific region. The book emphasises research having potential industry interest, covering a wide range of topics from major fields of ORIMS in a systematic and coherent fashion and shows the elegance of their implementations. The book is intended to serve the needs of applied researchers who are interested in applications of ORIMS algorithms. The book includes descriptions of many real-world problems together with their solutions; we hope the reader will appreciate their applicability. The Asia-pacific region has embraced business applications of decision support systems in recent years. Given that many of these applications are unaffected by legacy models or systems it has meant that state of the art ORIMS techniques have been embedded in them. Moreover, the increased use of OR/MS techniques in this region provides opportunities for identifying methodological advances that are taking place as a result of the unique nature of the applications. These also provide opportunities for exploring synergies and interfaces that exist between OR/MS, from the point of view of applications as well as theoretical advances.

Download or read book Handbook of Optical Dimensional Metrology written by Kevin Harding and published by CRC Press. This book was released on 2013-02-26 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their speed, data density, and versatility, optical metrology tools play important roles in today’s high-speed industrial manufacturing applications. Handbook of Optical Dimensional Metrology provides useful background information and practical examples to help readers understand and effectively use state-of-the-art optical metrology methods. The book first builds a foundation for evaluating optical measurement methods. It explores the many terms of optical metrology and compares it to other forms of metrology, such as mechanical gaging, highlighting the limitations and errors associated with each mode of measurement at a general level. This comparison is particularly helpful to current industry users who operate the most widely applied mechanical tools. The book then focuses on each application area of measurement, working down from large area to medium-sized to submicron measurements. It describes the measurement of large objects on the scale of buildings, the measurement of durable manufactured goods such as aircraft engines and appliances, and the measurement of fine features on the micron and nanometer scales. In each area, the book covers fast, coarse measures as well as the finest measurements possible. Best practices and practical examples for each technology aid readers in effectively using the methods. Requiring no prior expertise in optical dimensional metrology, this handbook helps engineers and quality specialists understand the capabilities and limitations of optical metrology methods. It also shows them how to successfully apply optical metrology to a vast array of current engineering and scientific problems.

Download or read book Adaptive Technologies and Business Integration Social Managerial and Organizational Dimensions written by Cruz-Cunha, Maria Manuela and published by IGI Global. This book was released on 2006-10-31 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book provides inter-organizational aspects in business integration including managerial and organizational integration, social integration, and technology integration, along with the resources to accomplish this competitive advantage"--Provided by publisher.

Download or read book Understanding New Media written by Kim H. Veltman and published by University of Calgary Press. This book was released on 2006 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book outlines the development currently underway in the technology of new media and looks further to examine the unforeseen effects of this phenomenon on our culture, our philosophies, and our spiritual outlook.

Download or read book Proceedings of the 7th International Conference on Axiomatic Design written by Mary Kathryn Thompson and published by ICAD 2013. This book was released on 2013-06-26 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of Flexible Production Systems written by Tullio Tolio and published by Springer Science & Business Media. This book was released on 2008-12-11 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade, the production of mechanical components to be assembled in final products produced in high volumes (e.g. cars, mopeds, industrial vehicles, etc.) has undergone deep changes due to the overall modifications in the way companies compete. Companies must consider competitive factors such as short lead times, tight product tolerances, frequent market changes and cost reduction. Anyway, companies often have to define production objectives as trade-offs among these critical factors since it can be difficult to improve all of them. Even if system flexibility is often considered a fundamental requirement for firms, it is not always a desirable characteristic of a system because it requires relevant investment cost which can jeopardize the profitability of the firm. Dedicated systems are not able to adapt to changes of the product characteristics while flexible systems offer more flexibility than what is needed, thus increasing investment and operative costs. Production contexts characterized by mid to high demand volume of well identified families of products in continuous evolution do not require the highest level of flexibility; therefore, manufacturing system flexibility must be rationalized and it is necessary to find out the best trade-off between productivity and flexibility by designing manufacturing systems endowed with the right level of flexibility required by the production problem. This new class of production systems can be named Focused Flexibility Manufacturing Systems-FFMSs. The flexibility degree in FFMSs is related to their ability to cope with volume, mix and technological changes, and it must take into account both present and future changes. The required level of system flexibility impacts on the architecture of the system and the explicit design of flexibility often leads to hybrid systems, i.e. automated integrated systems in which parts can be processed by both general purpose and dedicated machines. This is a key issue of FFMSs and results from the matching of flexibility and productivity that respectively characterize FMSs and Dedicated Manufacturing Systems (DMSs). The market share of the EU in the machine tool sector is 44%; the introduction of focused flexibility would be particularly important for machine tool builders whose competitive advantage is based on the ability of customizing their systems on the basis of needs of their customers. In fact, even if current production contexts frequently present situations which would fit well with the FFMS approach, tradition and know-how of machine tool builders play a crucial role. Firms often agree with the focused flexibility vision, nevertheless they decide not to pay the risk and efforts related to the design of this new system architecture. This is due also to the lack of well-structured design approaches which can help machine tool builders to configure innovative systems. Therefore, the FFMS topic is studied through the book chapters following a shared mission: "To define methodologies and tools to design production systems with a minimum level of flexibility needed to face, during their lifecycle, the product and process evolution both in the technological and demand aspects. The goal is to find out the optimal trade-off between flexibility and productivity". The book framework follows the architecture which has been developed to address the FFMS Design problem. This architecture is both broad and detailed, since it pays attention to all the relevant levels in a firm hierarchy which are involved in the system design. Moreover, the architecture is innovative because it models both the point of view of the machine tool builder and the point of view of the system user. The architecture starts analyzing Manufacturing Strategy issues and generating the possible demand scenario to be faced. Technological aspects play a key role while solving process plan problems for the products in the part family. Strategic and technological data becomes input when a machine tool builder performs system configuration. The resulting system configurations are possible solutions that a system user considers when planning its system capacity. All the steps of the architecture are deeply studied, developing methods and tools to address each subproblem. Particular attention is paid to the methodologies adopted to face the different subproblems: mathematical programming, stochastic programming, simulation techniques and inverse kinematics have been used. The whole architecture provides a general approach to implement the right degree of flexibility and it allows to study how different aspects and decisions taken in a firm impact on each other. The work presented in the book is innovative because it gives links among different research fields, such as Manufacturing Strategy, Process Plan, System Design, Capacity Planning and Performance Evaluation; moreover, it helps to formalize and rationalize a critical area such as manufacturing system flexibility. The addressed problem is relevant at an academic level but, also, at an industrial level. A great deal of industrial sectors need to address the problem of designing systems with the right degree of flexibility; for instance, automotive, white goods, electrical and electronic goods industries, etc. Attention to industrial issues is confirmed by empirical studies and real case analyses which are presented within the book chapters.

Download or read book Collaborative Product and Service Life Cycle Management for a Sustainable World written by Richard Curran and published by Springer Science & Business Media. This book was released on 2008-08-31 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Collaborative Product and Service Life Cycle Management for a Sustainable World” gathers together papers from the 15th ISPE International Conference on Concurrent Engineering (CE2008), to stimulate the new thinking that is so crucial to our sustained productivity enhancement and quality of life. It is already evident in this new century that the desire for sustainable development is increasingly driving the market to reach for new and innovative solutions that more effectively utilize the resources we have inherited from previous generations; with the obvious responsibility to future generations. Human productivity and progress can be positively engineered and managed in harmony with the provision and needs of our natural environment. One century on from the industrial revolution, this is now the time of the sustainable revolution; requiring holistic technological, process and people integrated solutions to sustained socio-economic enhancement.

Download or read book Technological Managerial and Organizational Core Competencies Dynamic Innovation and Sustainable Development written by Nobre, Farley Simon and published by IGI Global. This book was released on 2011-09-30 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovation involves a set of processes which support the production and transformation of knowledge into new processes, technologies and products, goods and services, and provide an organization with particular strengths and value relative to other firms. In such a view, innovation is a key source of customer benefits and sustainable competitive advantage. Technological, Managerial and Organizational Core Competencies: Dynamic Innovation and Sustainable Development investigates the impact of knowledge management, information systems, finance, organizational networks, internationalization, strategic management, marketing, entrepreneurship, and sustainability on an organization that pursues dynamic innovation and sustainable advantage. This book provides research and practice for graduate and undergraduate programs, as well as business firms with different technological, managerial, and organizational perspectives. Further Description from the Editors: This book represents the culmination of an international project to compile inter-disciplinary research that most contributes to innovation. More specifically, this book is about innovation in firms, industries, nations and society. It speaks to professionals and researchers who want to improve their understanding of dynamic innovation and sustainable development. The Editors’ goal is to foster cross-pollination among researchers. To this aim, the Editors have selected and assembled 35 chapters that illustrate multidisciplinary theoretical perspectives and empiric results on innovation and the roles of Sustainability, Organizational Networks, Entrepreneurship, Knowledge Management, R&D&T (Research, Development and Technology) Management, Marketing, Finance, Internationalization, and Information Systems in the organization that pursues dynamic innovation and sustainable development. Innovation involves processes, organizational elements (or resources), and Organizational Abilities (OA) that support the production and transformation of knowledge into new knowledge, processes, structures, technologies and products, goods and services. At the firm and industry levels of analysis, innovation can provide organizations with strengths relative to other firms, clusters, and nations and it is a key source of customer benefits and sustainable development. At the collective and societal levels of analysis, innovation can provide humanity with economic, social and environmental wealth through sustainable development. The uniqueness of this book lies in the participants’ efforts to identify Organizations' Creative Areas (OCA) that can provide core competencies for the organization in pursuit of dynamic innovation and sustainable development. In this perspective, innovation is a dynamic system and it is contingent upon a set of core competencies that couple to each other. Therefore, changing of even one competence can affect the organization's ability to innovate. The book avoids the term competitive advantage and adopts a more fruitful perspective of sustainable development – “the process of achieving human development … in an inclusive, connected, equitable, prudent, and secure manner”. An inclusive perspective sees traditional competitive advantage as occupying one extreme, whereas truly sustainable development occupies the opposite extreme. Sustainable development must benefit not only the organization and its customers, but also the whole society and the future of humanity through sustainability. Most chapters of this book fall between these extremes.

Download or read book Global Implications of Modern Enterprise Information Systems Technologies and Applications written by Gunasekaran, Angappa and published by IGI Global. This book was released on 2008-12-31 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book presents useful strategies, techniques, and tools for the successful design, development, and implementation of enterprise information systems"--Provided by publisher.