Download or read book Flat Quartz crystal X ray Spectrometer for Nuclear Forensics Applications written by Alison Goodsell and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability to quickly and accurately quantify the plutonium (Pu) content in pressurized water reactor (PWR) spent nuclear fuel (SNF) is critical for nuclear forensics purposes. One non-destructive assay (NDA) technique being investigated to detect bulk Pu in SNF is measuring the self-induced x-ray fluorescence (XRF). Previous XRF measurements of Three Mile Island (TMI) PWR SNF taken in July 2008 and January 2009 at Oak Ridge National Laboratory (ORNL) successfully illustrated the ability to detect the 103.7 keV x ray from Pu using a planar high-purity germanium (HPGe) detector. This allows for a direct measurement of Pu in SNF. Additional gamma ray and XRF measurements were performed on TMI SNF at ORNL in October 2011 to measure the signal-to-noise ratio for the 103.7 keV peak. Previous work had shown that the Pu/U peak ratio was directly proportional to the Pu/U content and increased linearly with burnup. However, the underlying Compton background significantly reduced the signal-to-noise ratio for the x-ray peaks of interest thereby requiring a prolonged count time. Comprehensive SNF simulations by Stafford et al showed the contributions to the Compton continuum were due to high-energy gamma rays scattering in the fuel, shipping tube, cladding, collimator and detector1. The background radiation was primarily due to the incoherent scattering of the 137Cs 661.7 keV gamma. In this work methods to reduce the Compton background and thereby increase the signal-to-noise ratio were investigated. To reduce the debilitating effects of the Compton background, a crystal x-ray spectrometer system was designed. This wavelength-dispersive spectroscopy technique isolated the Pu and U x rays according to Bragg's law by x-ray diffraction through a crystal structure. The higher energy background radiation was blocked from reaching the detector using a customized collimator and shielding system. A flat quartz-crystal x-ray spectrometer system was designed specifically to fit the constraints and requirements of detecting XRF from SNF. Simulations were performed to design and optimize the collimator design and to quantify the improved signal-to-noise ratio of the Pu and U x-ray peaks. The proposed crystal spectrometer system successfully diffracted the photon energies of interest while blocking the high-energy radiation from reaching the detector and contributing to background counts. The spectrometer system provided a higher signal-to-noise ratio and lower percent error for the XRF peaks of interest from Pu and U. Using the flat quartz-crystal x-ray spectrometer and customized collimation system, the Monte Carlo N-Particle (MCNP) simulations showed the 103.7 keV Pu x-ray peak signal-to-noise ratio improved by a factor of 13 and decreased the percent error by a factor of 3.3.
Download or read book Nuclear Spectrometer Applications written by Nuclear Measurements Corporation (Indianapolis, Ind.) and published by . This book was released on 1962 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The New Nuclear Forensics written by Vitaly Fedchenko and published by Oxford University Press. This book was released on 2015 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear material changes its form and properties as it moves through the nuclear fuel cycle, from one facility to another. Each step of the fuel cycle or each use of the material will inevitably leave its mark. The science of determining the history of a sample of nuclear material through the study of these characteristics is known as nuclear forensics. While nuclear forensic analysis has normally been associated with investigations and prosecutions in the contextof trafficking of nuclear materials or nuclear terrorism, it had wider applications in in national security contexts, such as nuclear non-proliferation, disarmament, and arms control. The New Nuclear Forensics is the first book to give a definitive guide to this broader definition of nuclear forensic analysis. This book describes the various methods used in nuclear forensics, giving first a broad introduction to the process followed by details of relevant measurement techniques and procedures. In each case, the advantages and limitations are outlined. To put these methods in context, the book also recounts the history of the discipline anddescribes the diverse contemporary applications of nuclear forensics.
Download or read book Handbook of X Ray Data written by Günter H. Zschornack and published by Springer Science & Business Media. This book was released on 2007-01-24 with total page 969 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the only handbook available on X-ray data. In a concise and informative manner, the most important data connected with the emission of characteristic X-ray lines are tabulated for all elements up to Z = 95 (Americium). The tabulated data are characterized and, in most cases, evaluated. Furthermore, all important processes and phenomena connected with the production, emission and detection of characteristic X-rays are discussed.
Download or read book X Ray Absorption and X Ray Emission Spectroscopy 2 Volume Set written by Jeroen A. van Bokhoven and published by John Wiley & Sons. This book was released on 2016-03-21 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-Ray Absorption and X-ray Emission Spectroscopy: Theory and Applications During the last two decades, remarkable and often spectacular progress has been made in the methodological and instrumental aspects of x-ray absorption and emission spectroscopy. This progress includes considerable technological improvements in the design and production of detectors especially with the development and expansion of large-scale synchrotron reactors All this has resulted in improved analytical performance and new applications, as well as in the perspective of a dramatic enhancement in the potential of x-ray based analysis techniques for the near future. This comprehensive two-volume treatise features articles that explain the phenomena and describe examples of X-ray absorption and emission applications in several fields, including chemistry, biochemistry, catalysis, amorphous and liquid systems, synchrotron radiation, and surface phenomena. Contributors explain the underlying theory, how to set up X-ray absorption experiments, and how to analyze the details of the resulting spectra. X-Ray Absorption and X-ray Emission Spectroscopy: Theory and Applications: Combines the theory, instrumentation and applications of x-ray absorption and emission spectroscopies which offer unique diagnostics to study almost any object in the Universe. Is the go-to reference book in the subject for all researchers across multi-disciplines since intense beams from modern sources have revolutionized x-ray science in recent years Is relevant to students, postdocurates and researchers working on x-rays and related synchrotron sources and applications in materials, physics, medicine, environment/geology, and biomedical materials
Download or read book Applications of Research Reactors written by International Atomic Energy Agency and published by International Atomic Energy Agency. This book was released on 2014 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is a comprehensive study that reviews the current situation in a great number of applications of research reactors. It revises the contents of IAEA TECDOC-1234, The Applications of Research Reactors, giving detailed updates on each field of research reactor uses worldwide. Reactors of all sizes and capabilities can benefit from the sharing of current practices and research enabled via this updated version, which describes the requirements for practicing methods as diverse as neutron activation analysis, education and training, neutron scattering and neutron imaging, silicon doping and radioisotope production, material/fuel irradiation and testing, and some others. Many underutilised research reactors can learn how to diversify their technical capabilities, staff and potential commercial partners and users seeking research reactor services and products. The content of the publication has also been strengthened in terms of current issues facing the vast majority of research reactors by including sections describing user and customer relations as well as strategic planning considerations.
Download or read book Forensic Chemistry Handbook written by Lawrence Kobilinsky and published by John Wiley & Sons. This book was released on 2011-11-17 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise, robust introduction to the various topics covered by the discipline of forensic chemistry The Forensic Chemistry Handbook focuses on topics in each of the major chemistry-related areas of forensic science. With chapter authors that span the forensic chemistry field, this book exposes readers to the state of the art on subjects such as serology (including blood, semen, and saliva), DNA/molecular biology, explosives and ballistics, toxicology, pharmacology, instrumental analysis, arson investigation, and various other types of chemical residue analysis. In addition, the Forensic Chemistry Handbook: Covers forensic chemistry in a clear, concise, and authoritative way Brings together in one volume the key topics in forensics where chemistry plays an important role, such as blood analysis, drug analysis, urine analysis, and DNA analysis Explains how to use analytical instruments to analyze crime scene evidence Contains numerous charts, illustrations, graphs, and tables to give quick access to pertinent information Media focus on high-profile trials like those of Scott Peterson or Kobe Bryant have peaked a growing interest in the fascinating subject of forensic chemistry. For those readers who want to understand the mechanisms of reactions used in laboratories to piece together crime scenes—and to fully grasp the chemistry behind it—this book is a must-have.
Download or read book Principles and Practice of X Ray Spectrometric Analysis written by E.P. Bertin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first edition of this book was published early in 1970, three major developments have occurred in the field of x-ray spectrochemical analysis. First, wavelength-dispersive spectrometry, in 1970 already securely established among instrumental analytical methods, has matured. Highly sophisticated, miniaturized, modular, solid-state circuitry has replaced elec tron-tube circuitry in the readout system. Computers are now widely used to program and control fully automated spectrometers and to store, process, and compute analytical concentrations directly and immediately from ac cumulated count data. Matrix effects have largely yielded to mathematical treatment. The problems associated with the ultralong-wavelength region have been largely surmounted. Indirect (association) methods have extended the applicability of x-ray spectrometry to the entire periodic table and even to certain classes of compounds. Modern commercial, computerized, auto matic, simultaneous x-ray spectrometers can index up to 60 specimens in turn into the measurement position and for each collect count data for up to 30 elements and read out the analytical results in 1--4 min-all corrected for absorption-enhancement and particle-size or surface-texture effects and wholly unattended. Sample preparation has long been the time-limiting step in x-ray spectrochemical analysis. Second, energy-dispersive spectrometry, in 1970 only beginning to assume its place among instrumental analytical methods, has undergone phenomenal development and application and, some believe, may supplant wavelength spectrometry for most applications in the foreseeable future.
Download or read book Modern Trends in Activation Analysis written by James R. DeVoe and published by . This book was released on 1969 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Practical X Ray Fluorescence Analysis written by Burkhard Beckhoff and published by Springer Science & Business Media. This book was released on 2007-05-18 with total page 897 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-Ray fluorescence analysis is an established technique for non-destructive elemental materials analysis. This book gives a user-oriented practical guidance to the application of this method. The book gives a survey of the theoretical fundamentals, analytical instrumentation, software for data processing, various excitation regimes including gracing incidents and microfocus measurements, quantitative analysis, applications in routine and micro analysis, mineralogy, biology, medicine, criminal investigations, archeology, metallurgy, abrasion, microelectronics, environmental air and water analysis. This book is the bible of X-Ray fluorescence analysis. It gives the basic knowledge on this technique, information on analytical equipment and guides the reader to the various applications. It appeals to researchers, analytically active engineers and advanced students.
Download or read book Handheld XRF in Cultural Heritage written by and published by . This book was released on 2020 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Neutron Generators for Analytical Purposes written by International Atomic Energy Agency and published by IAEA Radiation Technology Repo. This book was released on 2012 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication addresses recent developments in neutron generator (NG) technology. It presents information on compact instruments with high neutron yield to be used for neutron activation analysis (NAA) and prompt gamma neutron activation analysis in combination with high count rate spectrometers. Traditional NGs have been shown to be effective for applications including borehole logging, homeland security, nuclear medicine and the on-line analysis of aluminium, coal and cement. Pulsed fast thermal neutron analysis, as well as tagged and timed neutron analysis, are additional techniques which can be applied using NG. Furthermore, NG can effectively be used for elemental analysis and is also effective for analysis of hidden materials by neutron radiography. Useful guidelines for developing NG based research laboratories are also provided in this publication.
Download or read book Applications of X ray Computed Tomography in the Geosciences written by Florias Mees and published by Geological Society of London. This book was released on 2003 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray computed tomography (CT) is a technique that allows non-destructive imaging and quantification of internal features of objects. X-ray CT reveals differences in density and atomic composition and can therefore be used for the study of porosity, the relative distribution of contrasting solid phases and the penetration of injected solutions. In this book, various applications of X-ray CT in the geosciences are illustrated by papers covering a wide range of disciplines, including petrology, soil science, petroleum geology, geomechanics and sedimentology.
Download or read book Laboratory Micro X Ray Fluorescence Spectroscopy written by Michael Haschke and published by Springer Science & Business Media. This book was released on 2014-05-08 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-X-ray fluorescence offers the possibility for a position- sensitive and non-destructive analysis that can be used for the analysis of non-homogeneous materials and layer systems. This analytical technique has shown a dynamic development in the last 15 years and is used for the analysis of small particles, inclusions, of elemental distributions for a wide range of different applications both in research and quality control. The first experiments were performed on synchrotrons but there is a requirement for laboratory instruments which offers a fast and immediate access for analytical results. The book discuss the main components of a μ-XRF instrument and the different measurement modes, it gives an overview about the various instruments types, considers the special requirements for quantification of non-homogeneous materials and presents a wide range of application for single point and multi-point analysis as well as for distribution analysis in one, two and three dimensions.
Download or read book Handbook of Sample Preparation for Scanning Electron Microscopy and X Ray Microanalysis written by Patrick Echlin and published by Springer Science & Business Media. This book was released on 2011-04-14 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scanning electr on microscopy (SEM) and x-ray microanalysis can produce magnified images and in situ chemical information from virtually any type of specimen. The two instruments generally operate in a high vacuum and a very dry environment in order to produce the high energy beam of electrons needed for imaging and analysis. With a few notable exceptions, most specimens destined for study in the SEM are poor conductors and composed of beam sensitive light elements containing variable amounts of water. In the SEM, the imaging system depends on the specimen being sufficiently electrically conductive to ensure that the bulk of the incoming electrons go to ground. The formation of the image depends on collecting the different signals that are scattered as a consequence of the high energy beam interacting with the sample. Backscattered electrons and secondary electrons are generated within the primary beam-sample interactive volume and are the two principal signals used to form images. The backscattered electron coefficient ( ? ) increases with increasing atomic number of the specimen, whereas the secondary electron coefficient ( ? ) is relatively insensitive to atomic number. This fundamental diff- ence in the two signals can have an important effect on the way samples may need to be prepared. The analytical system depends on collecting the x-ray photons that are generated within the sample as a consequence of interaction with the same high energy beam of primary electrons used to produce images.
Download or read book Quantitative X Ray Spectrometry Second Edition written by Ron Jenkins and published by CRC Press. This book was released on 1995-04-26 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work covers important aspects of X-ray spectrometry, from basic principles to the selection of instrument parameters and sample preparation. This edition explicates the use of combined X-ray fluorescence and X-ray diffraction data, and features new applications in environmental studies, forensic science, archeometry and the analysis of metals and alloys, minerals and ore, ceramic materials, catalysts and trace metals.;This work is intended for spectroscopists, analytical chemists, materials scientists, experimental physicists, mineralogists, biologists, geologists and graduate-level students in these disciplines.
Download or read book The Spectroscopy of X rays written by Manne Siegbahn and published by . This book was released on 1925 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brief Summary of our Knowledge of X-rays up to Laue's Discovery. Interference of X-rays. Thechnique of X-ray Spectroscopy. Emission Spectra. Absorption Spectra. Systematic Arrangement and Theory of X-ray Spectra. The Continuous X-ray Spectrum. Other Methods of Evaluating the Inner Energy Levels of the Atoms. Appendix of Tables.
