Download or read book Flash Smelting written by W. G. Davenport and published by Elsevier. This book was released on 2015-05-11 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flash Smelting: Analysis, Control and Optimization deals with the analysis, control, and optimization of flash smelting. This book explores flash smelting in general and Outokumpu and Inco flash smelting in particular, and also presents a mathematical description for the flash smelting process. A set of mass and heat balance equations that can be used to describe steady state smelting under autogenous or nearautogenous smelting conditions is developed. This text has 20 chapters and begins with an overview of flash smelting and its products; the main raw materials of copper flash smelting; chemical reactions in the flash furnace; impurities in the concentrates that are fed to the flash furnace; and the operation of industrial flash furnaces. Attention then turns to Outokumpu flash smelting, Inço flash smelting, and mathematical representation of flash smelting. The chapters that follow focus on the effects of blast preheat on flash smelting; the combustion of fossil fuel in the flash furnace; and the effect of matte grade on the fossil fuel, industrial oxygen, and blast preheat requirements of flash smelting. Equations are used to determine the effects of such factors as concentrate composition, blast temperature, and dust carryout, and as the basis for optimizing and controlling the flash smelting process. This book will be of interest to both mathematicians and metallurgists.
Download or read book Extractive Metallurgy of Copper written by William G.I. Davenport and published by Elsevier. This book was released on 2002-09-19 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition has been extensively revised and updated since the 3rd edition published in 1994. It contains an even greater depth of industrial information, focussing on how copper metal is extracted from ore and scrap, and how this extraction could be made more efficient. Modern high intensity smelting processes are presented in detail, specifically flash, Contop, Isasmelt, Noranda, Teniente and direct-to-blister smelting. Considerable attention is paid to the control of SO2 emissions and manufacture of H2SO4. Recent developments in electrorefining, particularly stainless steel cathode technology are examined. Leaching, solvent extraction and electrowinning are evaluated together with their impact upon optimizing mineral resource utilization. The book demonstrates how recycling of copper and copper alloy scrap is an important source of copper and copper alloys. Copper quality control is also discussed and the book incorporates an important section on extraction economics. Each chapter is followed by a summary of concepts previously described and offers suggested further reading and references.
Download or read book Extractive Metallurgy of Copper written by Mark E. Schlesinger and published by Elsevier. This book was released on 2011-09-02 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: William G.I. Davenport
Download or read book Simulation and Optimization of Furnaces and Kilns for Nonferrous Metallurgical Engineering written by Chi Mei and published by Springer Science & Business Media. This book was released on 2010-12-28 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Simulation and Optimization of Furnaces and Kilns for Nonferrous Metallurgical Engineering" is based on advanced theories and research methods for fluid flow, mass and heat transfer, and fuel combustion. It introduces a hologram simulation and optimization methods for fluid field, temperature field, concentration field, and electro-magnetic field in various kinds of furnaces and kilns. Practical examples and a detailed introduction to methods for simulation and optimization of complex systems are included as well. These new methods have brought significant economic benefits to the industries involved. The book is intended for researchers and technical experts in metallurgical engineering, materials engineering, power and thermal energy engineering, chemical engineering, and mechanical engineering. Chi Mei, Jiemin Zhou, Xiaoqi Peng, Naijun Zhou and Ping Zhou are all professors at School of Energy Science and Engineering, Central South University, Changsha, Hunan Province, China.
Download or read book Innovative Process Development in Metallurgical Industry written by Vaikuntam Iyer Lakshmanan and published by Springer. This book was released on 2015-10-26 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the phases for innovative metallurgical process development, from concept to commercialization. Key features of the book include: • Need for process innovation • Selection and optimization of process steps • Determination of the commercial feasibility of a process including engineering and equipment selection • Determination of the environmental footprint of a process • Case-study examples of innovative process development
Download or read book Flash Smelting written by and published by Minerals, Metals, & Materials Society. This book was released on 2001 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title chronicles developments made in flash furnaces and the process of flash smelting. It is divided into a descriptive section and a mathematical section and this second updated edition includes the contributions of two authors and an updated mathematical approach.
Download or read book Proceedings of the Metallurgical Society of the Canadian Institute of Mining and Metallurgy written by G. Kachaniwsky and published by Elsevier. This book was released on 2016-07-29 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: The symposium brings together papers by industrial users of oxygen, major oxygen producers, engineering firms and leading experts in the field. It covers recent development in oxygen technology - both in application and technology. Both pyrometallurgical and hydrometallurgical applications are discussed, and O2 production technologies feature the cryogenic process together with several alternative novel methods. Established and new emerging processes are featured, and increased process efficiencies, higher throughputs and reduced energy consumption are among the objectives of the symposium.
Download or read book Principles of Extractive Metallurgy written by Terkel Rosenqvist and published by Tapir Academic Press. This book was released on 2004 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rather than simply describing the processes and reactions involved in metal extraction, this book concentrates on fundamental principles to give readers an understanding of the possibilities for future developments in this field. It includes a review of the basics of thermodynamics, kinetics and engineering principles that have special importance for extractive metallurgy, to ensure that readers have the background necessary for maximum achievement. The various metallurgical unit processes (such as roasting, reduction, smelting and electrolysis) are illustrated by existing techniques for the extraction of the most common metals. Each chapter includes a bibliography of recommended reading, to aid in further study. The appendices include tables and graphs of thermodynamic qualities for most substances of metallurgical importance; these are ideal for calculating heat (enthalpy) balances and chemical equilibrium constants. SI Units are used consistently throughout the text.
Download or read book T T Chen Honorary Symposium on Hydrometallurgy Electrometallurgy and Materials Characterization written by Shijie Wang and published by John Wiley & Sons. This book was released on 2012-05-09 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a symposium sponsored by the Hydrometallurgy and Electrometallurgy Committee and the Materials Characterization Committee of the Extraction and Processing Division of TMS (The Minerals, Metals & Materials Society) Held during the TMS 2012 Annual Meeting & Exhibition Orlando, Florida, USA March 11-15, 2012
Download or read book Copper and Copper Alloys written by Joseph R. Davis and published by ASM International. This book was released on 2001-01-01 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is a comprehensive guide to the selection and applications of copper and copper alloys, which constitute one of the largest and most diverse families of engineering materials. The handbook includes all of the essential information contained in the ASM Handbook series, as well as important reference information and data from a wide variety of ASM publications and industry sources.
Download or read book Extraction of Nuclear and Non ferrous Metals written by Sujay Kumar Dutta and published by Springer. This book was released on 2017-11-24 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive overview of non-ferrous metallurgy, especially its core principles and fundamental aspects, in a concise form. The book covers all basic concepts and definitions related to metal extraction, and provide succinct summaries of relevant metallurgical processes. It also covers the scientific and engineering aspects of nuclear processes and features special chapter on ultra-high-purity metals. The book employs a step-by-step approach, is written in an easy-to-understand style, and discusses significance of core concepts. As such, it not only offers a valuable guide for professionals and researchers working in the areas of metallurgy, mining, and chemical engineering, but can also be used as a core text in both graduate and professional coursework.
Download or read book Extractive Metallurgy of Nickel Cobalt and Platinum Group Metals written by Frank Crundwell and published by Elsevier. This book was released on 2011-09-23 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: W.G. Davenport
Download or read book EMC 91 Non Ferrous Metallurgy Present and Future written by Jean Vereecken and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers that will be presented at 'EMC '91 '-the European Metals Conference-to be held in Brussels, Belgium, from 15 to 20 September 1991, and organized by Benelux Metallurgie, GDMB (Gesellschaft Deutscher Metallhutten und Bergleute) and IMM (the Institution of Mining and Metallurgy). 'EMC '91' is the first of an intended major series organized at the European level with the aim of bringing together all those who are involved with the extraction and processing of non-ferrous metals-European metallurgists and their international colleagues-to provide them with the opportunity to exchange views on the state and evolution of their industry. The programme covers all the different aspects of the metallurgy of non-ferrous metals from mining to fabricated products. Particular attention is being paid to the European non -ferrous industry with respect to changes in demand, the technology used, pressures on the environment and the competitive position of manufacturers. The contributions of the plenary lecturers (copies of which will appear in the IMM journal Minerals Industry International in 1991-92) and the many authors are gratefully acknowledged. Thanks are also due to the referees of the papers, the sponsors, the companies that have allowed registrants to visit their operations, the chairmen of the technical sessions and the staffs of the organizing bodies for their efficient administrative work. Jean Vereecken Chairman, Organizing Committee July 1991 v Contents Foreword. . . . . . . . . . . . . . . . . . . . .. . . v .
Download or read book Interim Assessment Emissions and control written by and published by . This book was released on 1987 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Federal Register written by and published by . This book was released on 1974-10 with total page 1588 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interim Assessment the Causes and Effects of Acidic Deposition written by and published by . This book was released on 1988 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interim Assessment written by and published by . This book was released on 1987 with total page 986 pages. Available in PDF, EPUB and Kindle. Book excerpt:
