Download or read book Toxicological Risks of Selected Flame Retardant Chemicals written by National Research Council and published by National Academies Press. This book was released on 2000-07-06 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ignition of upholstered furniture by small open flames from matches, cigarette lighters, and candles is one of the leading causes of residential-fire deaths in the United States. These fires accounted for about 16% of civilian fire deaths in 1996. On average, each year since 1990, about 90 deaths (primarily of children), 440 injuries, and property losses amounting to 50 million dollars have resulted from fires caused by the ignition of upholstered furniture by small open flames. Certain commercial seating products (such as aircraft and bus seats) are subject to flammability standards and sometimes incorporate FR-treated upholstery cover materials, but there is no federal-government requirement for residential upholstered furniture, and it is generally not treated with FR chemicals. It is estimated that less than 0.2% of all U.S. residential upholstery fabric is treated with flame-retardant (FR) chemicals. The Consumer Product Safety Act of 1972 created the U.S. Consumer Product Safety Commission (CPSC) as an independent federal regulatory agency whose mission is to protect the public from unreasonable risks of injury and death associated with consumer products. CPSC also administers the Flammable Fabrics Act, under which it regulates flammability hazards and the Federal Hazardous Substances Act (FHSA), which regulates hazardous substances including chemicals. In 1993, the National Association of State Fire Marshals petitioned CPSC to issue a performance-based flammability standard for upholstered furniture to reduce the risk of residential fires. The Commission granted that portion of the petition relating to small open flame ignition risks. In response to concerns regarding the safety of FR chemicals, Congress, in the fiscal year 1999 appropriations report for CPSC, requested that the National Research Council conduct an independent study of the health risks to consumers posed by exposure to FR chemicals that are likely to be used in residential upholstered furniture to meet a CPSC standard. The National Research Council assigned the project to the Committee on Toxicology (COT) of the Commission on Life Sciences' Board on Environmental Studies and Toxicology. COT convened the Subcommittee on Flame-Retardant Chemicals, which prepared this report. Subcommittee members were chosen for their recognized expertise in toxicology, pharmacology, epidemiology, chemistry, exposure assessment, risk assessment, and biostatistics. Toxicological Risks of Selected Flame-Retardant Chemicals is organized into 18 chapters and two appendices. Chapter 2 describes the risk assessment process used by the subcommittee in determining the risk associated with potential exposure to the various FR chemicals. Chapter 3 describes the method the subcommittee used to measure and estimate the intensity, frequency, extent, and duration of human exposure to FR chemicals. Chapters 4-19 provide the subcommittee's review and assessment of health risks posed by exposure to each of the 16 FR chemicals. Data gaps and research needs are provided at the end of these chapters.

Download or read book Polymer Green Flame Retardants written by Constantine D. Papaspyrides and published by Newnes. This book was released on 2014-08-14 with total page 943 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Green Flame Retardants covers key issues regarding the response of polymers during fire, the mechanisms of their flame retardation, the regulations imposed on their use, and the health hazards arising from their combustion. Presenting the latest research developments, the book focuses in particular on nanocomposites, believed to be the most promising approach for producing physically superior materials with low flammability and ecological impact. The fire properties of nanocomposites of various matrixes and fillers are discussed, the toxicological characteristics of these materials are analyzed, addressing also their environmental sustainability. Edited by distinguished scientists, including an array of international industry and academia experts, this book will appeal to chemical, mechanical, environmental, material and process engineers, upper-level undergraduate and graduate students in these disciplines, and generally to researchers developing commercially attractive and environmentally friendly fire-proof products. - Provides recent findings on the manufacture of environmentally sustainable flame retardant polymeric materials - Covers legislation and regulations concerning flame retarded polymeric material use - Includes tables containing the fire properties of the most common polymeric materials

Download or read book Handbook of Flame Retardants written by George Wypych and published by Elsevier. This book was released on 2021-01-25 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Flame Retardants contains an extensive evaluation of the existing literature, products and patents related to flame retardance. As a perfect complement to The Databook of Flame Retardants, this book explains the roles, selection, mechanisms of action, use in different polymers and products, and health and environmental issues of over 350 different products. Chapters highlight the fundamentals of material burning and the associated stages of heat, flame and smoke, properties and mechanisms, and preventive, delaying and extinguishing attributes of 27 chemical groups of flame retardants. Examples of synergistic and antagonistic actions of various additives are discussed next, along with testing methods. The book concludes with chapters providing guidance on optimal selection of flame retardants for various polymers and information on the toxicity of flame retardants and their effects on the environment. - Evaluates the existing literature, products and patents related to flame retardance - Covers the fundamentals of material burning and associated stages of heat, flame and smoke - Outlines and evaluates the properties of 27 chemical groups of flame retardants - Provides examples of synergistic and antagonistic actions of various additives - Looks at methods of testing flame retardants and quantifies their effect on products

Download or read book Toxic Safety written by Alissa Cordner and published by Columbia University Press. This book was released on 2016-03-29 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Initially marketed as a life-saving advancement, flame retardants are now mired in controversy. Some argue that data show the chemicals are unsafe while others continue to support their use. The tactics of each side have far-reaching consequences for how we interpret new scientific discoveries. An experienced environmental sociologist, Alissa Cordner conducts more than a hundred interviews with activists, scientists, regulators, and industry professionals to isolate the social, scientific, economic, and political forces influencing environmental health policy today. Introducing "strategic science translation," she describes how stakeholders use scientific evidence to support nonscientific goals and construct "conceptual risk formulas" to shape risk assessment and the interpretation of empirical evidence. A revelatory text for public-health advocates, Toxic Safety demonstrates that while all parties interested in health issues use science to support their claims, they do not compete on a level playing field and even good intentions can have deleterious effects.

Download or read book The Non halogenated Flame Retardant Handbook written by Alexander B. Morgan and published by John Wiley & Sons. This book was released on 2014-04-07 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: A one-stop, practical handbook containing all of the current commercial non-halogenated flame retardant technologies as well as experimental systems near commercialization In response to the emphasis on replacing halogenated flame retardants with alternate technologies, this handbook focuses on existing non-halogenated flame retardants and the experimental close-to-production systems that are available today. The Non-Halogenated Flame Retardant Handbook starts with an overview of the regulations and customer perceptions driving non-halogenated flame retardant selections over older halogenated technologies. It then moves on to cover the known major classes of non-halogenated flame retardants, before concluding with the current niche-performing technologies and untried commercial contenders of the future. The Non-Halogenated Flame Retardant Handbook: Takes a practical approach to addressing the narrow subject of non-halogenated flame retardancy—placing more emphasis on flame retardant selection for specific plastics, practical considerations in flame retardant material design, and the various technologies’ strengths and limits Focuses on the proper use of non-halogenated flame retardants, rather than the mechanics of how they work Discusses important future trends in flame retardancy Features sections written by industrial and chemical experts who know how to apply the technology to polymers for fire safety needs

Download or read book Novel Fire Retardant Polymers and Composite Materials written by De-Yi Wang and published by Woodhead Publishing. This book was released on 2016-08-21 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Novel Fire Retardant Polymers and Composite Materials reviews the latest scientific developments and technological advances in the design and manufacture of fire retardant polymers and composite materials. Fire retardant polymeric materials are used in a broad range of applications in fields such as aviation, automotive, computer, construction, electronics, and telecommunications. It is essential to have a better understanding of the scientific technology used in the design and manufacture of fire-resistant materials and their end products. This book includes the latest developments in fire retardant technologies for different polymeric material systems, such as PU, PP, PE, PLA, epoxy, rubber, textile, phenol resin, and PA, etc. - Provides cutting-edge research in flame retardant materials, relevant to both scientific and industrial applications - Presents the latest and most up-to-date fire retardant technologies - Discusses the most popular fire retardant polymer systems - Includes the latest developments in fire retardant technologies for different polymeric material systems, such as PU, PP, PE, PLA, epoxy, rubber, textile, phenol resin, and PA

Download or read book Plastics Additives written by G. Pritchard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although plastics are extremely successful commercially, they would never reach acceptable performance standards either in properties or processing without the incorporation of additives. With the inclusion of additives, plastics can be used in a variety of areas competing directly with other materials, but there are still many challenges to overcome. Some additives are severely restricted by legislation, others interfere with each other-in short their effectiveness varies with circumstances. Plastics Additives explains these issues in an alphabetical format making them easily accessible to readers, enabling them to find specific information on a specific topic. Each additive is the subject of one or more articles, providing a suffinct account of each given topic. An international group of experts in additive and polymer science, from many world class companies and institutes, explain the recent rapid changes in additive technology. They cover novel additives (scorch inhibitors, compatibilizers, surface-modified particulates etc.), the established varieties (antioxidants, biocides, antistatic agents, nucleating agents, fillers, fibres, impact modifiers, plasticizers) and many others, the articles also consider environmental concerns, interactions between additives and legislative change. With a quick reference guide and introductory articles that provide the non-specialist and newcomer with relevant information, this reference book is essential reading for anyone concerned with plastics and additives.

Download or read book Databook of Flame Retardants written by Anna Wypych and published by ChemTec Publishing. This book was released on 2021-02-12 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Databook of Flame Retardants contains information on commonly-used additives broken out into five sections, including General, Physical, Health and Safety, Ecological, and Use. Over one hundred types of data are included for over three hundred and fifty commercial-based products. All data fields are defined and include a broad range of information, such as calcium contents, molecular mass, brightness, freezing/melting points, viscosity, volatility, UN/NA class, autoignition temperature, partition coefficient, processing methods, concentrations used, and more. This book is best utilized in tandem with the Handbook of Flame Retardants. Each book complements the other without repeating information, with the other release explaining the role of these products, their selection, mechanism of action, use in different polymers and products, and health and commercial issues related to flame retardants. Provides key physical, health and safety, ecological, and application data for over 350 commonly-used fire retardant additives Covers halogenated, inorganic, phosphorus, intumescent, and nitrogen-based fire retardants Data listed includes CAS #, chemical class and name, decomposition temperature, electrical conductivity, IMDG class, biodegradation probability, product and resin recommendations, guidelines for use, and more

Download or read book Flame Retardant Polymer Nanocomposites written by Alexander B. Morgan and published by John Wiley & Sons. This book was released on 2007-04-06 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flame Retardant Polymer Nanocomposites takes a comprehensive look at polymer nanocomposites for flame retardancy applications and includes nanocomposite fundamentals (theory, design, synthesis, characterization) as well as polymer flammability fundamentals with emphasis on how nanocomposites affect flammability. The book has practical examples from literature, patents, and existing commercial products. Readers can design new work based upon the material in the book or use it as a handy reference for interpreting existing work and results.

Download or read book Approved List Flame Retardant Application Concerns Fabrics Materials and Chemicals written by California. Office of the State Fire Marshal and published by . This book was released on 1974 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Flame Retardants 101 written by Frca and published by CRC Press. This book was released on 1998-01-14 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modern Polymer Flame Retardancy written by S.M. Lomakin and published by CRC Press. This book was released on 2023-01-06 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are obvious benefits in using flame-retardants, as many human lives and property are saved from fire. A large number of compounds have been identified as being used as flame-retardants. At present, knowledge of long-term effects resulting from exposure to flame retardants and their breakdown products is limited. The aim of this volume in the book series New Concepts in Polymer Science is to provide a general overview of the nature, mechanism of action, use and environmental hazards for a number of flame-retardants. This monograph (together with the book by the same authors, Ecological Aspects of Polymer Flame Retardancy (1999) will valuable to anyone interested in the field of flame-retardant chemicals.

Download or read book Environmental Inorganic Chemistry for Engineers written by James G. Speight and published by Butterworth-Heinemann. This book was released on 2017-05-10 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Inorganic Chemistry for Engineers explains the principles of inorganic contaminant behavior, also applying these principles to explore available remediation technologies, and providing the design, operation, and advantages or disadvantages of the various remediation technologies. Written for environmental engineers and researchers, this reference provides the tools and methods that are imperative to protect and improve the environment. The book's three-part treatment starts with a clear and rigorous exposition of metals, including topics such as preparations, structures and bonding, reactions and properties, and complex formation and sequestering. This coverage is followed by a self-contained section concerning complex formation, sequestering, and organometallics, including hydrides and carbonyls. Part Two, Non-Metals, provides an overview of chemical periodicity and the fundamentals of their structure and properties. Clearly explains the principles of inorganic contaminant behavior in order to explore available remediation technologies Provides the design, operation, and advantages or disadvantages of the various remediation technologies Presents a clear exposition of metals, including topics such as preparations, structures, and bonding, reaction and properties, and complex formation and sequestering

Download or read book Non halogenated Flame Retardant Handbook written by Alexander B. Morgan and published by John Wiley & Sons. This book was released on 2021-12-09 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: NON-HALOGENATED FLAME RETARDANT HANDBOOK The 2nd edition of the definitive single book of information, regulations, and how to use non-halogenated flame retardant technology. This book focuses on non-halogenated flame retardants with an emphasis on practical and applied issues, and builds upon the 1st edition, but is not just a re-do/re-edit of 1st/sup edition content. While non-halogenated flame retardants have not greatly changed since the 1st edition was published in 2014, there have been enough advances and changes to merit a 2nd edition. The book includes chapters on regulation and drivers for non-halogenated flame retardants, specific chapters on each of the major classes of flame retardants, as well as some newer technologies/niche non-halogenated solutions which are either starting to enter the market (coatings / bio-derived flame retardants) or are at least being studied with enough detail to bring to the attention of the reader. As with the 1st edition, the 2nd edition still takes a practical approach to addressing the narrow subject of non-halogenated flame retardancy. It includes more emphasis on flame retardant selection for specific plastics, practical considerations in flame retardant material design, and what the strengths and limits of these various technologies are. Previous flame retardant material science books have covered non-halogenated flame retardants, but they focus more on how they work rather than how to use them. This book focuses more on the practical uses, hence the title of the book “Handbook”, which should make it of good use to industrial chemists and material scientists. Audience The primary audience is material scientists, industrial chemists, fire safety engineers who have to meet flame retardant needs to sell products. It will also be useful to academics working to develop new flame retardant solutions.

Download or read book Fire Retardancy of Polymers written by T. Richard Hull and published by Royal Society of Chemistry. This book was released on 2009 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Globally, fire retardants are needed to satisfy a multibillion dollar market and fire retardancy of polymetric materials is an important component of fire safety. This book covers the latest developments in new fire retardancy systems for engineers needing to use fire safe materials in their projects.

Download or read book Flame Retardant Polymeric Materials written by Eli Pearce and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flammability has been recognized as an increasingly important social and scientific problem. Fire statistics in the United States (Report of the National Commission on Fire Prevention and Control. "America Burning:' 1973) emphasized the vast devastation to life and property--12.000 lives lost annually due to fire. and these deaths are usually caused by inhaling smoke or toxic gases: 300.000 fire injuries: 11.4 billion dollars in fire cost at which 2.7 billion dollars is related to property loss: a billion dollars to burn injury treatment: and 3.3 billion dollars in productivity loss. It is obvious that much human and economic misery can be attributed to fire situations. In relation to this. polymer flammability has been recognized as an in creasingly important social and scientific problem. The development of flame-retardant polymeric materials is a current example where the initia tive for major scientific and technological developments is motivated by sociological pressure and legislation. This is part of the important trend toward a safer environment and sets a pattern for future example. Flame retardancy deals with our basic everyday life situations-housing. work areas. transportation. clothing and so forth-the "macroenvironment" capsule within which "homosapiens" live. As a result. flame-retardant polymers are now emerging as a specific class of materials leading to new and diversified scientific and technological ventures.

Download or read book Flame Retardant Polymeric Materials written by Menachem Lewin and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flammability has been recognized as an increasingly important social and scientific problem. Fire statistics in the United States (Report of the National Commission on Fire Prevention and Control, "America Burning," 1973) emphasized the vast devastation to life and property--12,OOO lives lost annually due to fire, and these deaths are usually caused by inhaling smoke or toxic gases; 300,000 fire injuries; 11.4 billion dollars in fire cost at which 2.7 billion dollars is related to property loss; a billion dollars to burn injury treatment; and 3.3 billion dollars in productivity loss. It is obvious that much human and economic misery can be attributed to fire situations. In relation to this, polymer flammability has been recognized as an in creasingly important social and scientific problem. The development of flame-retardant polymeric materials is a current example where the initia tive for major scientific and technological developments is motivated by sociological pressure and legislation. This is part of the important trend toward a safer environment and sets a pattern for future example. Flame retardancy deals with our basic everyday life situations-housing, work areas, transportation, clothing and so forth-the "macroenvironment" capsule within which "homosapiens" live. As a result, flame-retardant polymers are now emerging as a specific class of materials leading to new and diversified scientific and technological ventures.