Download or read book First Principles based Thermokinetic Modeling of Steels and Ni Alloys for Nuclear Applications written by and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this dissertation was to develop multiscale modeling frameworks for describing modes of thermal and radiation-induced degradation in steels and Ni alloys for nuclear applications. The development of these models was performed according to the following general method: first, electronic structure calculations were performed to obtain key atomistic energies and insights. These calculations then formed a foundation for atomistic simulations and continuum level models used to describe microstructural processes of interest. The results of these models were compared to experimental measurements, and used to identify the fundamental mechanisms underlying the observed material phenomena. This approach was applied to three distinct topics. The first is the theory and prediction of radiation induced segregation in the Ni-Cr and Fe-Cr systems. In this subproject, the modeling effort yielded an important new understanding of the role of interstitial diffusion in radiation induced segregation. The effects of defect annihilation kinetics at grain boundaries were also examined. The second topic was the kinetics of the disorder-order phase transformation in Ni-Cr alloys. This project resulted in a physics-based model for describing the phase transformation that shows good agreement with both atomistic simulations and experimental measurements. The predictions of this model indicate that this phase transformation may be of serious concern in Ni-Cr alloys near the Ni2Cr stoichiometry during very long service lifetimes. Finally, the third topic was the evolution of oxide nanoprecipitates in nanostructured ferritic alloys. The key results of this effort were a better understanding of nanoprecipitate coarsening mechanisms and the effects of alloy composition on nanoprecipitate size distribution. The predictions of this model also indicate that the nanoprecipitates in nanostructured ferritic alloys should be thermally stable for as long as 80 years at proposed operating temperatures. In all three projects the first principles-based foundation provided by the electronic structure calculations allowed the resulting models to go beyond empirical fitting, and to provide understanding of the mechanisms underlying the microstructural processes of interest.
Download or read book Comprehensive Nuclear Materials written by and published by Elsevier. This book was released on 2020-07-22 with total page 4871 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials in a nuclear environment are exposed to extreme conditions of radiation, temperature and/or corrosion, and in many cases the combination of these makes the material behavior very different from conventional materials. This is evident for the four major technological challenges the nuclear technology domain is facing currently: (i) long-term operation of existing Generation II nuclear power plants, (ii) the design of the next generation reactors (Generation IV), (iii) the construction of the ITER fusion reactor in Cadarache (France), (iv) and the intermediate and final disposal of nuclear waste. In order to address these challenges, engineers and designers need to know the properties of a wide variety of materials under these conditions and to understand the underlying processes affecting changes in their behavior, in order to assess their performance and to determine the limits of operation. Comprehensive Nuclear Materials, Second Edition, Seven Volume Set provides broad ranging, validated summaries of all the major topics in the field of nuclear material research for fission as well as fusion reactor systems. Attention is given to the fundamental scientific aspects of nuclear materials: fuel and structural materials for fission reactors, waste materials, and materials for fusion reactors. The articles are written at a level that allows undergraduate students to understand the material, while providing active researchers with a ready reference resource of information. Most of the chapters from the first Edition have been revised and updated and a significant number of new topics are covered in completely new material. During the ten years between the two editions, the challenge for applications of nuclear materials has been significantly impacted by world events, public awareness, and technological innovation. Materials play a key role as enablers of new technologies, and we trust that this new edition of Comprehensive Nuclear Materials has captured the key recent developments. Critically reviews the major classes and functions of materials, supporting the selection, assessment, validation and engineering of materials in extreme nuclear environments Comprehensive resource for up-to-date and authoritative information which is not always available elsewhere, even in journals Provides an in-depth treatment of materials modeling and simulation, with a specific focus on nuclear issues Serves as an excellent entry point for students and researchers new to the field
Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1076 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Maraging Steels written by W Sha and published by Elsevier. This book was released on 2009-10-26 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maraging steels are high-strength steels combined with good toughness. They are used particularly in aerospace and tooling applications. Maraging refers to the ageing of martensite, a hard microstructure commonly found in steels.Maraging steels: modelling of microstructure, properties and applications covers the following topics: Introduction to maraging steels; Microstructure of maraging steels; Mechanical properties of maraging steels; Thermodynamic calculations for quantifying the phase fraction and element partition in maraging systems and precipitation hardening steels; Quantification of phase transformation kinetics in maraging steels; Quantification of age hardening in maraging steels; Maraging steels and overageing; Precipitation hardening stainless steel; Applications of artificial neural network on modelling maraging steel properties.With its distinguished authors, Maraging steels: modelling of microstructure, properties and applications is a standard reference for industry and researchers concerned with maraging steels and modelling as well as users of maraging steels in the aerospace and tooling sectors. The book includes both conventional maraging steels and precipitation hardened (PH) stainless steels. - Provides an overview of maraging steels including microstructure and mechanical properties - Reviews thermodynamic calculations for quantifying the phase fraction and element partition in maraging steels - Includes chapters on the quantification of phase transformation kinetics and age hardening in maraging steels
Download or read book Reactor Core Materials written by and published by . This book was released on 1960 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Aluminium Metallurgy written by Roger Lumley and published by Elsevier. This book was released on 2010-11-25 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium is an important metal in manufacturing, due to its versatile properties and the many applications of both the processed metal and its alloys in different industries. Fundamentals of aluminium metallurgy provides a comprehensive overview of the production, properties and processing of aluminium, and its applications in manufacturing industries.Part one discusses different methods of producing and casting aluminium, covering areas such as casting of alloys, quality issues and specific production methods such as high-pressure diecasting. The metallurgical properties of aluminium and its alloys are reviewed in Part two, with chapters on such topics as hardening, precipitation processes and solute partitioning and clustering, as well as properties such as fracture resistance. Finally, Part three includes chapters on joining, laser sintering and other methods of processing aluminium, and its applications in particular areas of industry such as aerospace.With its distinguished editor and team of expert contributors, Fundamentals of aluminium metallurgy is a standard reference for researchers in metallurgy, as well as all those involved in the manufacture and use of aluminium products. - Provides a comprehensive overview of the production, properties and processing of aluminium, and its applications in manufacturing industries - Considers many issues of central importance in aluminium production and utilization considering quality issues and design for fatigue growth resistance - Metallurgical properties of aluminium and its alloys are further explored with particular reference to work hardening and applications of industrial alloys
Download or read book Superalloys written by Matthew J. Donachie and published by ASM International. This book was released on 2002 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers virtually all technical aspects related to the selection, processing, use, and analysis of superalloys. The text of this new second edition has been completely revised and expanded with many new figures and tables added. In developing this new edition, the focus has been on providing comprehensive and practical coverage of superalloys technology. Some highlights include the most complete and up-to-date presentation available on alloy melting. Coverage of alloy selection provides many tips and guidelines that the reader can use in identifying an appropriate alloy for a specific application. The relation of properties and microstructure is covered in more detail than in previous books.
Download or read book CALPHAD Calculation of Phase Diagrams A Comprehensive Guide written by N. Saunders and published by Elsevier. This book was released on 1998-06-09 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph acts as a benchmark to current achievements in the field of Computer Coupling of Phase Diagrams and Thermochemistry, often called CALPHAD which is an acronym for Computer CALculation of PHAse Diagrams. It also acts as a guide to both the basic background of the subject area and the cutting edge of the topic, combining comprehensive discussions of the underlying physical principles of the CALPHAD method with detailed descriptions of their application to real complex multi-component materials.Approaches which combine both thermodynamic and kinetic models to interpret non-equilibrium phase transformations are also reviewed.
Download or read book Bainite and Martensite written by Carlos Garcia-Mateo and published by MDPI. This book was released on 2020-05-27 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: The microstructures of both martensite and bainite, although sharing some common features, depict a plethora of subtle differences that made them unique when studied in further detail. Tailoring the final properties of a microstructure based on one or the other as well as in combination with others and exploring more sophisticated concepts, such as Q&P and nanostructured bainite, are the topics which are the focus of research around the world. In understanding the key microstructural parameters controlling the final properties as well as definition of adequate process parameters to attain the desired microstructures requires that a proper understanding of the mechanism ruling their transformation and a detailed characterization first be acheived. The development of new and powerful scientific techniques and equipment (EBSD, APT, HRTEM, etc.) allow us to gain fundamental insights that help to establish some of the principles by which those microstructures are known. The developments accompanying such findings lead to further developments and intensive research providing the required metallurgical support.
Download or read book Atomic Transport in Solids written by A. R. Allnatt and published by Cambridge University Press. This book was released on 2003-10-30 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the fundamental statistical theory of atomic transport in crystalline solids, that is the means by which processes occurring at the atomic level are related to macroscopic transport coefficients and other observable quantities. The cornerstones of the authors' treatment are (i) the physical concepts of lattice defects, (ii) the phenomenological description provided by non-equilibrium thermodynamics and (iii) the various methods of statistical mechanics used to link these (kinetic theory, random-walk theory, linear response theory etc.). The book is primarily concerned with transport in the body of crystal lattices and not with transport on surfaces, within grain boundaries or along dislocations, although much of the theory here presented can be applied to these low-dimensional structures when they are atomically well ordered and regular.
Download or read book Chemical Abstracts written by and published by . This book was released on 1990 with total page 2210 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microdynamics Simulation written by Paul Bons and published by Springer Science & Business Media. This book was released on 2007-11-21 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete starting package for students and researchers of the earth science community interested in numerical modeling of microstructures. This excellent book deals with the numerical simulation of such microstructures in rocks. It starts with an introduction to existing methods and techniques for optical and electron microscopic analysis. The main part of the book contains examples of numerical modeling of processes and microstructures in rocks, using the software package "ELLE".
Download or read book Advanced Steels written by Yuqing Weng and published by Springer Science & Business Media. This book was released on 2011-04-14 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Advanced Steels: The Recent Scenario in Steel Science and Technology" contains more than 50 articles selected from the proceedings of the International Conference on Advanced Steels (ICAS) held during 9-11, Nov, 2010 in Guilin, China. This book covers almost all important aspects of steels from physical metallurgy, steel grades, processing and fabrication, simulation, to properties and applications. The book is intended for researchers and postgraduate students in the field of steels, metallurgy and materials science. Prof. Yuqing Weng is an academician of Chinese Academy of Engineering and the president of The Chinese Society for Metals. Prof. Han Dong is the vice president of Central Iron & Steel Research Institute and the director of National Engineering Research Center of Advanced Steel Technology, China. Prof. Yong Gan is an academician of Chinese Academy of Engineering, the vice president of Chinese Academy of Engineering and the president of Central Iron & Steel Research Institute, China.
Download or read book Zirconium in the Nuclear Industry written by Gerry D. Moan and published by ASTM International. This book was released on 2002 with total page 891 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation The 41 papers of this proceedings volume were first presented at the 13th symposium on Zirconium in the Nuclear Industry held in Annecy, France in June of 2001. Many of the papers are devoted to material related issues, corrosion and hydriding behavior, in-reactor studies, and the behavior and properties of Zr alloys used in storing spent fuel. Some papers report on studies of second phase particles, irradiation creep and growth, and material performance during loss of coolant and reactivity initiated accidents. Annotation copyrighted by Book News, Inc., Portland, OR.
Download or read book Heat Transfer in Polymer Composite Materials written by Nicolas Boyard and published by John Wiley & Sons. This book was released on 2016-03-28 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses general information, good practices and examples about thermo-physical properties, thermo-kinetic and thermo-mechanical couplings, instrumentation in thermal science, thermal optimization and infrared radiation.
Download or read book NASA Glenn Coefficients for Calculating Thermodynamic Properties of Individual Species written by Bonnie J. McBride and published by . This book was released on 2002 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Thermal Analysis written by M.E. Brown and published by Springer Science & Business Media. This book was released on 2006-01-10 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: to Thermal Analysis Techniques and Applications Edited by Michael E. Brown Chemistry Department, Rhodes University, Grahamstown, South Africa KLUWER ACADEMIC PUBLISHERS NEW YORK, BOSTON, DORDRECHT, LONDON, MOSCOW eBook ISBN: 0-306-48404-8 Print ISBN: 1-4020-0472-9 ©2004 Kluwer Academic Publishers New York, Boston, Dordrecht, London, Moscow Print ©2001 Kluwer Academic Publishers Dordrecht All rights reserved No part of this eBook may be reproduced or transmitted in any form or by any means, electronic, mechanical, recording, or otherwise, without written consent from the Publisher Created in the United States of America Visit Kluwer Online at: http://kluweronline. com and Kluwer's eBookstore at: http://ebooks. kluweronline. com CONTENTS Preface to the First Edition, Chapman & Hall, London, 1988 ix About the First Edition of this Book x Preface to the Second Edition xi 1. INTRODUCTION 1. 1 Definition and History 1 1. 2 Thermal Analysis Instruments 4 References 11 2. THERMAL EVENTS 2. 1 Introduction 13 2. 2 The Solid State 13 2. 3 Reactions of Solids 14 2. 4 Decomposition of Solids 15 2. 5 Reaction with the Surrounding Atmosphere 16 2. 6 Solid-Solid Interactions 16 References 17 3. THERMOGRAVIMETRY (TG) Introduction 3. 1 19 3. 2 The Balance 19 3. 3 Heating the Sample 21 3. 4 The Atmosphere 24 3. 5 The Sample 26 3. 6 Temperature Measurement 26 3. 7 Temperature Control 28 Sample Controlled Thermal Analysis (SCTA) 29 3. 8 3. 9 Calibration 36 3. 10 Presentation of TG Data 37 3.
