Download or read book Fire Safety Design for Tall Buildings written by Feng Fu and published by CRC Press. This book was released on 2021-02-18 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fire Safety Design for Tall Buildings provides structural engineers, architects, and students with a systematic introduction to fire safety design for tall buildings based on current analysis methods, design guidelines, and codes. It covers almost all aspects of fire safety design that an engineer or an architect might encounter—such as performance-based design and the basic principles of fire development and heat transfer. It also sets out an effective way of preventing the progressive collapse of a building in fire, and it demonstrates 3D modeling techniques to perform structural fire analysis with examples that replicate real fire incidents such as the Twin Towers and WTC7. This helps readers to understand the design of structures and analyze their behavior in fire.
Download or read book Fire Safety for Very Tall Buildings written by International Code Council and published by Springer Nature. This book was released on 2021-10-30 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Guide provides information on special topics that affect the fire safety performance of very tall buildings, their occupants and first responders during a fire. This Guide addresses these topics as part of the overall building design process using performance-based fire protection engineering concepts as described in the SFPE Engineering Guide to Performance Based Fire Protection. This Guide is not intended to be a recommended practice or a document that is suitable for adoption as a code. The Guide pertains to “super tall,” “very tall” and “tall” buildings. Throughout this Guide, all such buildings are called “very tall buildings.” These buildings are characterized by heights that impose fire protection challenges; they require special attention beyond the protection features typically provided by traditional fire protection methods. This Guide does not establish a definition of buildings that fall within the scope of this document.
Download or read book Fire Safety in Construction Work written by and published by . This book was released on 1997-01 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists all health and safety legislation for which the Health and Safety Commission and Executive has responsibility, either directly or through an agency agreement with another Government Department. The list contains all current health and safety legislation that applies in great Britain and effects Business, together with Approved Codes of Practice listed under the legislation which they support. Aimed at all employers, employees and the self employed.
Download or read book Fire Safety Challenges of Green Buildings written by Brian Meacham and published by Springer Science & Business Media. This book was released on 2013-08-05 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental concerns and advances in architectural technologies have lead to a greater number of green buildings or buildings with green, eco-friendly elements. However, from a practical standpoint, there is no incident reporting system in the world that tracks data on fire incidents in green buildings. Fire safety objectives are not explicitly considered in most green rating schemes, and green design features have been associated with photovoltaic panels and roof materials, lightweight timber frame buildings, and combustible insulation materials. Fire Safety Challenges of Green Buildings is the result of an extensive global literature review that sought to identify issues related to green building elements or features and ways to ensure those issues are tracked for future improvement. The book identifies actual incidents of fires in green buildings or involving green building elements, points out issues with green building elements that would increase fire risk, clarifies reports and studies that address ways to reduce fire risk in green design elements, and compares research studies that explicitly incorporate fire safety into green building design. The authors also pinpoint gaps and specific research needs associated with understanding and addressing fire risk and hazards with green building design. Using their data, the authors developed a set of matrices relating these green attributes and potential fire hazards. With these comprehensive tools, potential mitigation strategies for addressing the relative increase in fire risk or hazard associated with the green building elements and features have been identified. Fire Safety Challenges of Green Buildings is intended for practitioners as a tool for analyzing building safety issues in green architecture and developing methods for tracking data related to green design elements and their potential hazards. Researchers working in a related field will also find the book valuable.
Download or read book Simplified Design for Building Fire Safety written by James Patterson and published by John Wiley & Sons. This book was released on 1993-12-16 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organized into three sections, it begins with the phenomena of fire followed by the principles of design by which one develops a defense against fire disaster in buildings. Lastly, it deals with the hardware of fire control, communication and extinguishment. A thorough analysis of building code criteria regarding fire safety is included. Each chapter features study aids along with questions and answers.
Download or read book Fire Protection Engineering in Building Design written by Jane Lataille and published by Butterworth-Heinemann. This book was released on 2003 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing the implementation and integration of fire protection engineering, this concise reference encompasses not only the basic information on the functions, design and implementation of systems, but also reveals how this area can be integrated withother engineering disciplines.
Download or read book Fire Safety In Buildings written by V. K. Jain and published by Taylor & Francis. This book was released on 2007 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ever-Increasing Population And Demand Of Built-Up Spaces Have Constrained Our Society To Go For Compact And Multi-Storeyed Building Premises. In Metropolitan Cities, There Was No Choice For Town Planners But To Go For Vertical Expansion Rather Than Horizontal. The Net Result Was Construction Of Thousands Of Multi-Storeyed Complexes Which Needed Proper Fire Security Arrangements. Legislation Exists At Different Levels Incorporating Different Type Of Restrictions To The Designers And Occupiers Of The Building. A Vast Amount Of Guidelines Exists But Not Known To Everybody Engaged In The Field.This Book Is Designed To Cover This Gap And Will Be A Right Choice In This Direction. It Comprehensively Deals Not Only With The Fundamentals Of Fire Engineering Appends Different Building Bye-Laws And Relevant Abstracts From Bis And National Building Codes, Nfpa, Lpa, Tac, Etc. But Reviews Structural Safety, And Provides Sufficient Multi Disciplinary Guidelines For Selecting Proper Gadgets For Complete Fire Safety Of Building Complexes. A Complete Treatise On Fire Security Of Its Own Kind For The First Time In India.
Download or read book Structural Design for Fire Safety written by Andrew H. Buchanan and published by John Wiley & Sons. This book was released on 2017-01-30 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Design for Fire Safety, 2nd edition Andrew H. Buchanan, University of Canterbury, New Zealand Anthony K. Abu, University of Canterbury, New Zealand A practical and informative guide to structural fire engineering This book presents a comprehensive overview of structural fire engineering. An update on the first edition, the book describes new developments in the past ten years, including advanced calculation methods and computer programs. Further additions include: calculation methods for membrane action in floor slabs exposed to fires; a chapter on composite steel-concrete construction; and case studies of structural collapses. The book begins with an introduction to fire safety in buildings, from fire growth and development to the devastating effects of severe fires on large building structures. Methods of calculating fire severity and fire resistance are then described in detail, together with both simple and advanced methods for assessing and designing for structural fire safety in buildings constructed from structural steel, reinforced concrete, or structural timber. Structural Design for Fire Safety, 2nd edition bridges the information gap between fire safety engineers, structural engineers and building officials, and it will be useful for many others including architects, code writers, building designers, and firefighters. Key features: • Updated references to current research, as well as new end-of-chapter questions and worked examples. •Authors experienced in teaching, researching, and applying structural fire engineering in real buildings. • A focus on basic principles rather than specific building code requirements, for an international audience. An essential guide for structural engineers who wish to improve their understanding of buildings exposed to severe fires and an ideal textbook for introductory or advanced courses in structural fire engineering.
Download or read book Basics Fire Safety written by Bert Bielefeld and published by Birkhäuser. This book was released on 2020-01-20 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fire safety is an important part of building design. It consists of measures to prevent fires from starting, to facilitate the rescue of individuals in a burning building, and to help firefighters contain a blaze. The book explains the general concepts and fundamental issues of fire safety in building design beyond the particulars of local building regulations.
Download or read book Fire Behavior and Fire Protection in Timber Buildings written by Roza Aseeva and published by Springer Science & Business Media. This book was released on 2013-12-03 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume describes fire behavior and fire protection of timbers in outdoors and indoors application mainly in construction industry. The Authors’ novel approach considers the relationship between various species and age of timbers and its fire behavior at different thermal and fire loads. Quantitative data of ignition speed and flame propagation as well as generation of heat, smoke and toxic products are discussed. Analysis of fire resistance of various types of building materials based on timber of different species as well as the novel data on the effect of natural and accelerated aging of timbers on its fire behavior are discussed. The main practical methods of fire protection of new and ancient timber buildings and structures to increase its fire resistance are considered. The book should be useful for a wide range of readers: chemists, physicists, material scientists, architects, engineers, constructors and restorers.
Download or read book Fire Safety of Historical Buildings written by Gabriele Bernardini and published by Springer. This book was released on 2017-04-19 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book applies a behavioral point of view to individuals’ fire safety in historic buildings. It outlines theoretical and operative issues, based on recent studies and international guidelines. Firstly, critical issues for Building Heritage fire safety are widely discussed, by including the modelling of human factor and man-environment-fire interference in these architectural spaces. A significant part of the book includes a discussion on emergency modeling and simulation. A source code for representing the fire evacuation process (including man-evacuation facilities interactions) is offered to the reader. Methods for effectiveness assessment of risk-reducing solutions are provided and tested in a case-study. Being a structured approach to occupants-related problems during a fire in heritage buildings, it offers an innovative methodology and practical examples that researchers and designers can use as a guide when proposing and testing solutions. Evaluation indexes for effectiveness assessment (also useful for future guidelines or handbooks) are included. Readers are encouraged to understand these indexes within the proposed approach, so as to extend their applications and possibilities of how to introduce human behaviors-based solutions in other fields. Lastly, attention is focused on the proposal and evaluation of low-impact and not-invasive strategies, such as ones based on wayfinding elements. From this point of view, the pros and cons of wayfinding systems are discussed: these are important today, especially for fire-safety designers, because of the ongoing innovations in this field.
Download or read book Fire Safety Retrofitting in Historic Buildings written by and published by . This book was released on 1989 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fire Safety in Buildings written by H. L. Malhotra and published by . This book was released on 1987 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NFPA 101 written by National Fire Protection Association and published by National Fire Protection Association (NFPA). This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Issued by the Standards Council on August 17, 2017, with an effective date of September 6, 2017, and supersedes all previous editions"--Page 1.
Download or read book Concepts in Building Firesafety written by M. David Egan and published by . This book was released on 1986 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Brannigan s Building Construction for the Fire Service written by Francis Brannigan and published by Jones & Bartlett Publishers. This book was released on 2010-02-22 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brannigan’s Building Construction for the Fire Service, Fourth Edition is a must read for fire fighters, prospective fire fighters, and fire science students. This edition continues the Brannigan tradition of using plain language to describe technical information about different building types and their unique hazards. This text ensures that critical fire fighting information is easy-to-understand and gives valuable experience to fire fighters before stepping onto the fireground. The first edition of Building Construction for the Fire Service was published in 1971. Frank Brannigan was compelled to write the most comprehensive building construction text for the fire service so that he could save fire fighters’ lives. His passion for detail and extensive practical experience helped him to develop the most popular text on the market. His motto of: “Know your buildings,” informs every aspect of this new edition of the text. Listen to a Podcast with Brannigan's Building Construction for the Fire Service, Fourth Edition co-author Glenn Corbett to learn more about this training program! Glenn discusses his relationship with the late Frank Brannigan, the dangers of heavy construction timber, occupancy specific hazards, and other areas of emphasis within the Fourth Edition. To listen now, visit: http://d2jw81rkebrcvk.cloudfront.net/assets.multimedia/audio/Building_Construction.mp3.
Download or read book Design of Buildings for Fire Safety written by E. E. Smith and published by ASTM International. This book was released on 1979 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
