Download or read book Fire Hazards in Industry written by Norman Thomson and published by Elsevier. This book was released on 2001-12-06 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant loss to business occurs through fires in the workplace. Whether large or small, fire causes personal suffering, damage to plant, equipment and buildings, and loss of business. Fire legislation has changed over the past few years, especially with the introduction of European Directives. New regulations mean that employers have to carry out fire risk assessment and then, as a result of their findings, put in place control measures to prevent loss of life. Fire Hazards in Industry has been designed to cover, in general terms, exactly what is required of employers. It is written in simple language and considers the basics of good fire safety management. After reading Fire Hazards in Industry, any employer, safety professional or fire safety officer should be able to install a system for carrying out fire risk assessment. In addition to sections relating to the legal aspects of fire prevention, the book explains the concepts of fire modelling, explosions and combustion reactions. There is also a section relating to common industry fire hazards and hazards associated with electrical equipment. Knowledge of all these topics would be required if a person were to attempt to carry out fire risk assessment. Throughout the book, past case histories are used to illustrate certain aspects of fire and the causes of fire. The cases used have all been published by the Health and Safety Executive as a result of their investigations. These include; Abbeystead, Frodingham steelworks, HMS Glasgow, BP Grangemouth and many more. This book will be equally relevant to motor manufacturing as it is to the chemical industry. There are many case studies included that deal with fire hazards that are found in general industry.Fire Hazards in Industry is suitable for those who have relatively limited experience in fire safety and therefore use it as part of their career and educational development, but also can be used as reference material for those experienced professionals who have fire safety included in their day to day responsibility.
Download or read book Fire Risks in Industry written by Alec Munro Cameron and published by . This book was released on 1927 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fire Risk Management written by Luca Fiorentini and published by John Wiley & Sons. This book was released on 2023-07-31 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: FIRE RISK MANAGEMENT Practical methodologies to develop holistic and comprehensive fire safety strategies for buildings and industrial assets In Fire Risk Management: Principles and Strategies for Buildings and Industrial Assets, a team of distinguished authors delivers an incisive combination of risk management principles and fire safety assessment methods that offers practical strategies and workflows to prevent and mitigate today’s complex fire scenarios. The book summarizes modern, risk-based approaches to fire safety, discussing fire safety objectives in terms of functional statements, performance requirements, and detailed protection measures for buildings and industrial assets towards the development of a fire safety case to timely manage risk with a systematic and structured approach throughout the life cycle of the asset. The authors introduce the fundamentals of fire safety and design principles before moving on to discuss topics like fire risk assessment methods, risk profiles, risk mitigation, safety management and performance, and protective layers and controls. Fire Risk Management presents practical methods, often borrowed from those successfully used in other domains, that can be defined, shared, and communicated with multiple stakeholders from different backgrounds and with different needs and perspectives. Readers will also find: A code-neutral examination of fire safety principles that is independent of local regulations Discussions of key principle standards, including NFPA 550 and ISO 45001, and guidelines on fire risk assessment Practical explorations that connect theory with practice in the real world In-depth case studies that walk readers through fire risk management strategies for railway stations, warehouse storage facilities, heritage buildings, renewable energy installations, and process industry plants Perfect for fire safety practitioners, engineers, and other stakeholders involved in the design and operation of buildings and industrial assets, Fire Risk Management: Principles and Strategies for Buildings and Industrial Assets will also earn a place in the libraries of facility owners and operators, safety systems managers, occupational health and safety professionals, and code officials.
Download or read book Fire Risks in Industry By Alec M Cameron written by Royal Institute of Chemistry and published by . This book was released on 1927 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of Fire Safety written by D. Rasbash and published by John Wiley & Sons. This book was released on 2004-04-21 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fire safety is a major concern in many industries, particularly as there have been significant increases in recent years in the quantities of hazardous materials in process, storage or transport. Plants are becoming larger and are often situated in or close to densely populated areas, and the hazards are continually highlighted with incidents such as the fires and explosions at the Piper Alpha oil and gas platform, and the Enschede firework factory. As a result, greater attention than ever before is now being given to the evaluation and control of these hazards. In a comprehensive treatment of the subject unavailable elsewhere, this book describes in detail the applications of hazard and risk analysis to fire safety, going on to develop and apply quantification methods. It also gives an explanation in quantitative terms of improvements in fire safety in association with the costs that are expended in their achievement. Furthermore, a quantitative approach is applied to major fire and explosion disasters to demonstrate crucial faults and events. Featuring: Full international coverage and a review of several major fires and explosion disasters. Presentation of the properties and science of fire including the latest research. Detailed coverage of the performance of fire safety measures. This is an essential book for practitioners in fire safety engineering, loss prevention professionals, technical personnel in insurance companies as well as academics involved in fire science and postgraduate students. This book is also a useful reference for fire safety officers, building designers, engineers in the process industries, safety practitioners and risk assessment consultants.
Download or read book Fire Hazards in Industry written by Norman Thomson and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Fire Protection Handbook written by R. Craig Schroll and published by CRC Press. This book was released on 2016-04-19 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentally, fire prevention and control refer to systems and practices that increase a facility's ability to avoid fires, limit the development and spread of fires, and rapidly and effectively control fires. Changing safety codes and regulations along with recent technological advances have rendered the first edition of this popular handbook som
Download or read book Assessment of an Industry s Fire Risk written by S. Alagan and published by . This book was released on 1980 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fire and Explosion Hazards Handbook of Industrial Chemicals written by Nicholas P. Cheremisinoff and published by Elsevier. This book was released on 2013-10-22 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: The handbook provides ready information on the fire and chemical reactivity of commonly used chemicals. Its purpose is to provide basic information important to the safe handling of chemicals and to help provide guidance in responding to a hazardous materials incident, in particular, incidents involving reactive chemicals and materials posing fire and explosion hazards. The volume has been written for chemical handling specialists, first responders to hazardous materials incidents, and firefighters. The basic definition used for a hazard materials incident is any situation that may potentially lead to catastrophic fire or explosion, and or human exposed to a toxic chemical. This situation may result from a spill of a hazardous material, a leak from a storage vessel or shipping container, or the mixing of incompatible chemicals whereby a chemical reaction could occur resulting in the release of energy and generation of toxic and perhaps flammable by-products. The volume provides chemical specific information, providing the reader with rigorous information on the chemical of interest.This book is a compendium of chemical specific fire and chemical reactivity data and information. More than 1,000 chemicals have been researched and organized into a reference handbook for fire specialists, chemical handling specialists, and plant safety engineers. The specific information provided for chemicals includes the flammability characteristics, recommended fire extinguishing practices, fire extinguishing agents not to be used, behavior in fires, burning characteristics, chemical reactivity with regard to water and common materials, incompatible chemical mixtures, containment and neutralization methods for spills. This reference book has been designed as a data bank for the hazardous materials handling specialist and industrial safety managers dealing with large chemical inventories. It is intended to be used by fire and loss prevention specialists and as a basis for developing procedures for safe storing and handling of chemicals. The authors have included an extensive physical properties section on chemicals, with information most pertinent to fire response situations.
Download or read book Risk informed Performance based Industrial Fire Protection written by Thomas F. Barry and published by . This book was released on 2002-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Fire Hazards Handbook written by Jim L. Linville and published by National Fire Protection Association (NFPA). This book was released on 1984 with total page 1116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Quantitative Risk Assessment in Fire Safety written by Ganapathy Ramachandran and published by Routledge. This book was released on 2011-02-25 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fire safety regulations in many countries require Fire Risk Assessment to be carried out for buildings such as workplaces and houses in multiple occupation. This duty is imposed on a "Responsible Person" and also on any other persons having control of buildings in compliance with the requirements specified in the regulations. Although regulations only require a qualitative assessment of fire risk, a quantitative assessment is an essential first step for performing cost-benefit analysis of alternative fire strategies to comply with the regulations and selecting the most cost-effective strategy. To facilitate this assessment, various qualitative, semi-quantitative and quantitative techniques of fire risk assessment, already developed, are critically reviewed in this book and some improvements are suggested. This book is intended to be an expanded version of Part 7: Probabilistic risk assessment, 2003, a Published Document (PD) to British Standard BS 7974: 2001 on the Application of Fire Safety Engineering Principles to the Design of Buildings. Ganapathy Ramachandran and David Charters were co-authors of PD 7974 Part 7. Quantitative Risk Assessment in Fire Safety is essential reading for consultants, academics, fire safety engineers, fire officers, building control officers and students in fire safety engineering. It also provides useful tools for fire protection economists and risk management professionals, including those involved in fire insurance underwriting.
Download or read book Industrial Fire Safety Guidebook written by Tatyana Davletshina and published by Elsevier. This book was released on 1998-12-31 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference has been written for emergency response personnel, plant safety specialists, and emergency response coordinators. It has been prepared at a practical level to assist both in training safety personnel and to provide technical information that can assist in responding to a hazard material incident that could lead to a fire hazard situation. Considerable information and technical data are given on petroleum based products since these are among the most widely consumed products, however, the reader will find ample information on other chemicals. Fire situations pose one of the most serious problems in an industrial setting, with the potential loss of lives and property, as well as damage to the environment. Proper response by trained personnel, as well as careful preplanning can minimize the risk and damage caused by fire.
Download or read book Handbook of Fire and Explosion Protection Engineering Principles written by Dennis P. Nolan and published by William Andrew. This book was released on 2014-05-28 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an engineer for engineers, this book is both training manual and on-going reference, bringing together all the different facets of the complex processes that must be in place to minimize the risk to people, plant and the environment from fires, explosions, vapour releases and oil spills. Fully compliant with international regulatory requirements, relatively compact but comprehensive in its coverage, engineers, safety professionals and concerned company management will buy this book to capitalize on the author’s life-long expertise. This is the only book focusing specifically on oil and gas and related chemical facilities. This new edition includes updates on management practices, lessons learned from recent incidents, and new material on chemical processes, hazards and risk reviews (e.g. CHAZOP). Latest technology on fireproofing, fire and gas detection systems and applications is also covered. An introductory chapter on the philosophy of protection principles along with fundamental background material on the properties of the chemicals concerned and their behaviours under industrial conditions, combined with a detailed section on modern risk analysis techniques makes this book essential reading for students and professionals following Industrial Safety, Chemical Process Safety and Fire Protection Engineering courses. A practical, results-oriented manual for practicing engineers, bringing protection principles and chemistry together with modern risk analysis techniques Specific focus on oil and gas and related chemical facilities, making it comprehensive and compact Includes the latest best practice guidance, as well as lessons learned from recent incidents
Download or read book Planning Fire Safety in Industry written by Fire Protection Association and published by . This book was released on 1964 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Guide to Fire and Gas Detection Design in Hazardous Industries written by James McNay and published by CRC Press. This book was released on 2022-08-10 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last 15 years, the field of fire and gas mapping has grown extensively, yet very little is published on the subject. The text includes deeper discussions on important engineering factors associated with fire and gas detection, along with anecdotes and examples. It will guide the readers on what to consider when you do not have access to proprietary guides, and how to interpret the design process even when one does not have access to a guidance document. The text covers important topics including visual flame detection, flame detection mapping, infrared point gas detector (IRPGD), infrared open path gas detector (OPGD), ultrasonic/acoustic design, and gas detection mapping. The book plays the following roles: Explores practical aspects of designing a detection layout Enables users in interpreting a detector data sheet and coverage analysis Teaches readers working on a project to cut through the marketing of detection and design an effective system Inclusion of real-life experiences on projects will provide engineers with clear examples of where things can, and often do, go wrong It is an ideal text for professionals and graduate students working in the fields of occupational health and safety, fire protection engineering, and environmental safety. The text discusses fundamental aspects of fire and gas mapping, which has been applied with great success in many parts of the world and is commonly adopted by the major operators in the process industries.
Download or read book The Industrial Arts Index written by and published by . This book was released on 1927 with total page 1204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
