Download or read book Guideline on Fire Ratings of Archaic Materials and Assemblies written by and published by . This book was released on 2000 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of the Guideline on Fire Ratings of Archaic Materials and Assemblies is to assist architects, engineers, preservationists, and code officials in evaluating the fire safety of older buildings by providing documentation on the fire-related performance of a wide variety of archaic building materials and assemblies, and, for those cases where documentation cannot be found, by providing ways to evaluate general classes of archaic materials and assemblies.
Download or read book Construction Technology written by Eric Fleming and published by John Wiley & Sons. This book was released on 2009-02-12 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new textbook provides a comprehensive introduction to everyaspect of the technology of low-rise construction. It includessub-structure (site work, setting out and foundations) andsuperstructure (flooring, roofs, finishes, fittings and fixtures).The material here covers the first year course requirement of allcourses on which construction technology is taught - no matter whatthe ultimate qualification. It offers tried and tested solutions to a range of constructionproblems and is organised following the sequence of construction.It will show what has been done in the past, demonstrating goodpractice - what works and what doesn't - and common faults. Thereare summaries of the more important BSI documents and reference tothe latest building regulations. Lengthy explanations are avoided by relying heavily on hundreds ofillustrations, pairing detail drawings with clear photographs toshow real life construction situations. The supporting spreadsheet referred to in the book can be found atthis linkhttp://www.blackwellpublishing.com/pdf/fleming/Fleming_spreadsheet.xls
Download or read book Structural Design for Fire Safety written by Andrew H. Buchanan and published by John Wiley & Sons. This book was released on 2017-01-30 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Design for Fire Safety, 2nd edition Andrew H. Buchanan, University of Canterbury, New Zealand Anthony K. Abu, University of Canterbury, New Zealand A practical and informative guide to structural fire engineering This book presents a comprehensive overview of structural fire engineering. An update on the first edition, the book describes new developments in the past ten years, including advanced calculation methods and computer programs. Further additions include: calculation methods for membrane action in floor slabs exposed to fires; a chapter on composite steel-concrete construction; and case studies of structural collapses. The book begins with an introduction to fire safety in buildings, from fire growth and development to the devastating effects of severe fires on large building structures. Methods of calculating fire severity and fire resistance are then described in detail, together with both simple and advanced methods for assessing and designing for structural fire safety in buildings constructed from structural steel, reinforced concrete, or structural timber. Structural Design for Fire Safety, 2nd edition bridges the information gap between fire safety engineers, structural engineers and building officials, and it will be useful for many others including architects, code writers, building designers, and firefighters. Key features: • Updated references to current research, as well as new end-of-chapter questions and worked examples. •Authors experienced in teaching, researching, and applying structural fire engineering in real buildings. • A focus on basic principles rather than specific building code requirements, for an international audience. An essential guide for structural engineers who wish to improve their understanding of buildings exposed to severe fires and an ideal textbook for introductory or advanced courses in structural fire engineering.
Download or read book Materials for Architects and Builders written by Arthur Lyons and published by Routledge. This book was released on 2014-08-21 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Architects and Builders provides a clear and concise introduction to the broad range of materials used within the construction industry and covers the essential details of their manufacture, key physical properties, specification and uses. Understanding the basics of materials is a crucial part of undergraduate and diploma construction or architecture-related courses, and this established textbook helps the reader to do just that with the help of colour photographs and clear diagrams throughout. This new edition has been completely revised and updated to include the latest developments in materials research, new images, appropriate technologies and relevant legislation. The ecological effects of building construction and lifetime use remain an important focus, and this new edition includes a wide range of energy saving building components.
Download or read book 2015 International Existing Building Code written by International Code Council and published by . This book was released on 2014-06-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Resource added for the Fire Science Program 305318.
Download or read book Brannigan s Building Construction for the Fire Service written by Francis Brannigan and published by Jones & Bartlett Publishers. This book was released on 2010-02-22 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brannigan’s Building Construction for the Fire Service, Fourth Edition is a must read for fire fighters, prospective fire fighters, and fire science students. This edition continues the Brannigan tradition of using plain language to describe technical information about different building types and their unique hazards. This text ensures that critical fire fighting information is easy-to-understand and gives valuable experience to fire fighters before stepping onto the fireground. The first edition of Building Construction for the Fire Service was published in 1971. Frank Brannigan was compelled to write the most comprehensive building construction text for the fire service so that he could save fire fighters’ lives. His passion for detail and extensive practical experience helped him to develop the most popular text on the market. His motto of: “Know your buildings,” informs every aspect of this new edition of the text. Listen to a Podcast with Brannigan's Building Construction for the Fire Service, Fourth Edition co-author Glenn Corbett to learn more about this training program! Glenn discusses his relationship with the late Frank Brannigan, the dangers of heavy construction timber, occupancy specific hazards, and other areas of emphasis within the Fourth Edition. To listen now, visit: http://d2jw81rkebrcvk.cloudfront.net/assets.multimedia/audio/Building_Construction.mp3.
Download or read book Building Materials in Civil Engineering written by Haimei Zhang and published by Elsevier. This book was released on 2011-05-09 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: The construction of buildings and structures relies on having a thorough understanding of building materials. Without this knowledge it would not be possible to build safe, efficient and long-lasting buildings, structures and dwellings. Building materials in civil engineering provides an overview of the complete range of building materials available to civil engineers and all those involved in the building and construction industries.The book begins with an introductory chapter describing the basic properties of building materials. Further chapters cover the basic properties of building materials, air hardening cement materials, cement, concrete, building mortar, wall and roof materials, construction steel, wood, waterproof materials, building plastics, heat-insulating materials and sound-absorbing materials and finishing materials. Each chapter includes a series of questions, allowing readers to test the knowledge they have gained. A detailed appendix gives information on the testing of building materials.With its distinguished editor and eminent editorial committee, Building materials in civil engineering is a standard introductory reference book on the complete range of building materials. It is aimed at students of civil engineering, construction engineering and allied courses including water supply and drainage engineering. It also serves as a source of essential background information for engineers and professionals in the civil engineering and construction sector. - Provides an overview of the complete range of building materials available to civil engineers and all those involved in the building and construction industries - Explores the basic properties of building materials featuring air hardening cement materials, wall and roof materials and sound-absorbing materials - Each chapter includes a series of questions, allowing readers to test the knowledge they have gained
Download or read book Twentieth Century Building Materials written by Thomas C. Jester and published by Getty Publications. This book was released on 2014-08-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the concluding decades of the twentieth century, the historic preservation community increasingly turned its attention to modern buildings, including bungalows from the 1930s, gas stations and diners from the 1940s, and office buildings and architectural homes from the 1950s. Conservation efforts, however, were often hampered by a lack of technical information about the products used in these structures, and to fill this gap Twentieth-Century Building Materials was developed by the U.S. Department of the Interior’s National Park Service and first published in 1995. Now, this invaluable guide is being reissued—with a new preface by the book’s original editor. With more than 250 illustrations, including a full-color photographic essay, the volume remains an indispensable reference on the history and conservation of modern building materials. Thirty-seven essays written by leading experts offer insights into the history, manufacturing processes, and uses of a wide range of materials, including glass block, aluminum, plywood, linoleum, and gypsum board. Readers will also learn about how these materials perform over time and discover valuable conservation and repair techniques. Bibliographies and sources for further research complete the volume. The book is intended for a wide range of conservation professionals including architects, engineers, conservators, and material scientists engaged in the conservation of modern buildings, as well as scholars in related disciplines.
Download or read book American Standard Building Code Requirements for Masonry written by American Standards Association. Sectional Committee on Building Code Requirements and Good Practice Recommendations for Masonry, A41 and published by . This book was released on 1944 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recommended Minimum Requirements for Small Dwelling Construction written by United States. Department of Commerce. Building Code Committee and published by . This book was released on 1923 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Light Earth Building written by Franz Volhard and published by Birkhäuser. This book was released on 2016-04-11 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interest in clay as a building material – which has proved its sustainable characteristics over centuries – is growing. Light clay, which is light in weight and easy to work, is presented here as a versatile and forward-looking building material for modern computer-aided timber construction and the renewal of historic timber-framed buildings with clay infill. The balanced building physics properties of the material, which can be controlled through the mixing proportions, make it suitable for resource-efficient building in various different climate zones. Thermal storage, sound insulation, protection against moisture and fire in conventional timber construction are improved, and the construction is simplified. This standard publication describes detailed production methods, includes practical tips for self-building, and demonstrates the application of ready-made materials in modern construction. The book is aimed at architects, engineers, and their clients, as well as for listed building officers, manufacturers, tradesmen and self-builders
Download or read book Architecture in Detail written by Graham Bizley and published by Routledge. This book was released on 2008 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of detailed studies of recent construction projects that will help all architects learn and expand the possibilities of their own work. Projects have been selected for their use of innovative techniques, and these insights could help overcome problems, reduce a project's cost, speed up work on site or help with an idea that is hard to achieve. Each project within the book consists of striking detailed drawings, supplemented by color photographs and explanatory text. These details are an excellent way to see how others are using new materials and techniques that may be relevant to an architect's own work. It can seem daunting for a student, or even a qualified architect, to see high-quality, interesting buildings when the project or daily workload is a lot more humdrum. This book demystifies construction and spreads knowledge of good practice. The author is well known as he has a biweekly feature in Building Design, the UK's most read magazine by architects. The projects have been carefully selected from those published and have been adapted and expanded to create a really useful reference.
Download or read book Basic Civil Engineering written by S. S. Bhavikatti and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Canadian Wood frame House Construction written by John Burrows and published by Central Mortgage and Housing Corporation. This book was released on 2005 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handy reference book walks you through the complete construction of a wood frame house, from excavation to the finishing touches. It is updated to the current edition of the National Building code. This is the most comprehensive, easy-to-use reference book for the construction of wood-frame houses. Canadian Wood-Frame House Construction features illustrations tables, plan ahead notes, healthy housing insights to minimize and protect occupants and environment.
Download or read book Air Infiltration Control in Housing written by Arne Elmroth and published by . This book was released on 1983 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Denna bok bygger på AICs (Air Infiltration Centre) arbete om byggnaders lufttäthet. Bokens första del redogör för principer, motiv, energibalans i hus, konstruktioner av såväl redan existerande som nya byggnader m m. Den andra delen beskriver sex olika länders förutsättningar att bygga hus med en önskvärd grad av lufttäthet.
Download or read book How to Inspect the Exterior written by Nick Gromicko and published by . This book was released on 2011-11-30 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Control of Concrete Mixtures written by Steven H. Kosmatka and published by . This book was released on 1988 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Portland Cement Association reference, dealing with fundamentals, cold weather concreting, curing, admixtures, aggregates, mixing, and much more.
