Download or read book Fire Hazards in Industry written by Norman Thomson and published by Elsevier. This book was released on 2001-12-06 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant loss to business occurs through fires in the workplace. Whether large or small, fire causes personal suffering, damage to plant, equipment and buildings, and loss of business. Fire legislation has changed over the past few years, especially with the introduction of European Directives. New regulations mean that employers have to carry out fire risk assessment and then, as a result of their findings, put in place control measures to prevent loss of life. Fire Hazards in Industry has been designed to cover, in general terms, exactly what is required of employers. It is written in simple language and considers the basics of good fire safety management. After reading Fire Hazards in Industry, any employer, safety professional or fire safety officer should be able to install a system for carrying out fire risk assessment. In addition to sections relating to the legal aspects of fire prevention, the book explains the concepts of fire modelling, explosions and combustion reactions. There is also a section relating to common industry fire hazards and hazards associated with electrical equipment. Knowledge of all these topics would be required if a person were to attempt to carry out fire risk assessment. Throughout the book, past case histories are used to illustrate certain aspects of fire and the causes of fire. The cases used have all been published by the Health and Safety Executive as a result of their investigations. These include; Abbeystead, Frodingham steelworks, HMS Glasgow, BP Grangemouth and many more.This book will be equally relevant to motor manufacturing as it is to the chemical industry. There are many case studies included that deal with fire hazards that are found in general industry.Fire Hazards in Industry is suitable for those who have relatively limited experience in fire safety and therefore use it as part of their career and educational development, but also can be used as reference material for those experienced professionals who have fire safety included in their day to day responsibility.
Download or read book Fire Hazards of Electrical Cables written by Jozef Martinka and published by Springer Nature. This book was released on 2022-10-26 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive approach to the assessment of fire hazards of electrical cables. The first part of the book describes division of cables, main parameters of electrical cables, and fault scenarios of cables leading to fire or occupant injuries. The traditional approach to fire hazards of electrical cables assessment is also described in the first part. The second part of the book is focused on the creation and description of a new approach to fire hazard assessment of electrical cables. The new approach is based on the assessment of both ignition parameters of electrical cables and the impact of their fires on the surrounding area. The ignition parameters include critical heat flux, ignition temperature, and critical electrical current. The impact of cable fires on the surrounding area is expressed by the released heat, toxicity of combustion products (determined by the amount of released carbon oxides and oxygen consumed), and visibility (determined by the smoke extinction area). Newly created approach is practically illustrated on specific types of cables (power cables classified to B2ca and Fca reaction to fire class) in this book. The book is intended mainly for academics in the fields of both fire protection engineering and electrical engineering. Besides that, the professionals in fire safety will find valuable information concerning impact of electrical cables on the safety of occupants and structures during fire in the book. In addition, the book sheds light on the issue of fire safety of electrical cables for the professionals in both electrical and power engineering. Last but not least, the book is appropriate also for students in the fields of fire, electrical, and power engineering in bachelor, master, and Ph.D. degree.
Download or read book Electrical Fire Analysis written by Robert A. Yereance and published by Charles C Thomas Publisher. This book was released on 2010 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This updated and expanded third edition continues the theme of the second edition of providing extensive research findings in all types of electrical fires. This book describes in a practical and easy-to-understand manner the patterns of electrical fires which make it easier to determine where an electrical fire started. Specific topics include: (1) the general background and essential elements of fire initiation; (2) codes and standards, testing laboratories approval, non-electrical fires, arc mapping and V-patterns; (3) disassembly of equipment, nameplates, equipment misuse, abuse, and repair; (4) the gathering, preserving, and shipping of evidence, keeping records; (5) common clues, melting points, and insulation degradation; (6) common components, moveable contacts, switches and relays, circuit breakers and panels, conduit joints, heating elements; (7) appliances, wall outlets and switches, light bulbs, reversed polarity; (8) arson, telephones and answering machines, igniters, debris inspection; (9) reports, depositions and trials, report purpose and appearances; (10) fire initiation and spread, space heaters, wires, and other heat-producing mechanisms; (11) fire characteristics and general precautions; (12) electrical systems and grounds, general wiring; (13) photography and camera features; (14) electrical circuits and waves; and (15) electrical power equipment, transformers, generators, rectifiers, and motors. This book is an excellent resource not only for arson investigators but for attorneys, the insurance industry, and manufacturers who are concerned with electronic reliability."--pub. desc.
Download or read book National Electrical Code written by National Fire Protection Association and published by Singular. This book was released on 1998 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the latest electrical regulation code that is applicable for electrical wiring and equipment installation for all buildings, covering emergency situations, owner liability, and procedures for ensuring public and workplace safety.
Download or read book Occupational Injuries From Electrical Shock and Arc Flash Events written by Richard B. Campbell and published by Springer. This book was released on 2016-09-02 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This brief presents information on occupational injuries from electric shock and arc flash events through a review of literature, electrical incident data, and similar sources. It includes pertinent information such as the nature of the incident, adherence to safety requirements, use of appropriate personal protective equipment (PPE), and extent of injury. Chapters address arc flash and shock hazards, and the need for empirical incident data on the actual hazards that may be experienced when equipment faults or adverse electrical events occur. Certain tasks where the risk of an arc flash or shock hazard may be lower, such as normal operation of properly installed and maintained equipment, may not require the use of any special PPE. Some of this risk reduction is based on anecdotal data, and the brief details why future research challenges will need more empirical incident data on the actual hazards and associated injuries that may be experienced when equipment faults or adverse electrical events occur. Designed for professionals and researchers in fire protection engineering, workplace electrical tasks, or workplace safety, this brief offers a thorough overview of the trends in electrical injuries and the costs related to those injuries.
Download or read book Preparation of Fire Hazard Analyses for Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 1998 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Report discusses the ways of preparing a fire hazard analysis for a nuclear power plant. A comprehensive fire hazard analysis determines the adequacy of the fire protection measures (e.g. administrative controls, operator actions and passive fire protection components) and the necessary fixed fire protection systems. The publication will be useful to designers of new plants as well as operators of existing plants when preparing or updating a fire hazard analysis.
Download or read book Fire Hazard Assessment of Lithium Ion Battery Energy Storage Systems written by Andrew F. Blum and published by Springer. This book was released on 2016-08-06 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a concise overview of lithium-ion (Li-ion) battery energy storage systems (ESSs), this book also presents the full-scale fire testing of 100 kilowatt hour (kWh) Li-ion battery ESSs. It details a full-scale fire testing plan to perform an assessment of Li-ion battery ESS fire hazards, developed after a thorough technical study. It documents the results of the testing plan including external and internal ignition testing, ESS positioning, temperature and heat flux measurements, pressure measurement, weather meters, and data acquisition systems. A comprehensive literature review and gap analysis reveal the current state of research into this vital aspect of energy storage. The authors cover the characteristics and hazards of Li-ion batteries, their anatomy and design, commercial and residential ESSs, historical fire incidents, and ESS codes and regulations. Researchers and professionals working in fire protection engineering, battery systems engineering, or energy storage will find this book a useful example of a fire testing plan. The results of the hazard assessment offer insights for those involved in electrical, fire, and building codes, as well as practitioners in design standards and fire testing.
Download or read book Handbook of Fire and Explosion Protection Engineering Principles written by Dennis P. Nolan and published by William Andrew. This book was released on 2014-05-28 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an engineer for engineers, this book is both training manual and on-going reference, bringing together all the different facets of the complex processes that must be in place to minimize the risk to people, plant and the environment from fires, explosions, vapour releases and oil spills. Fully compliant with international regulatory requirements, relatively compact but comprehensive in its coverage, engineers, safety professionals and concerned company management will buy this book to capitalize on the author's life-long expertise. This is the only book focusing specifically on oil and gas and related chemical facilities. This new edition includes updates on management practices, lessons learned from recent incidents, and new material on chemical processes, hazards and risk reviews (e.g. CHAZOP). Latest technology on fireproofing, fire and gas detection systems and applications is also covered. An introductory chapter on the philosophy of protection principles along with fundamental background material on the properties of the chemicals concerned and their behaviours under industrial conditions, combined with a detailed section on modern risk analysis techniques makes this book essential reading for students and professionals following Industrial Safety, Chemical Process Safety and Fire Protection Engineering courses. - A practical, results-oriented manual for practicing engineers, bringing protection principles and chemistry together with modern risk analysis techniques - Specific focus on oil and gas and related chemical facilities, making it comprehensive and compact - Includes the latest best practice guidance, as well as lessons learned from recent incidents
Download or read book Emergency Response Guidebook written by U.S. Department of Transportation and published by Simon and Schuster. This book was released on 2013-06-03 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Does the identification number 60 indicate a toxic substance or a flammable solid, in the molten state at an elevated temperature? Does the identification number 1035 indicate ethane or butane? What is the difference between natural gas transmission pipelines and natural gas distribution pipelines? If you came upon an overturned truck on the highway that was leaking, would you be able to identify if it was hazardous and know what steps to take? Questions like these and more are answered in the Emergency Response Guidebook. Learn how to identify symbols for and vehicles carrying toxic, flammable, explosive, radioactive, or otherwise harmful substances and how to respond once an incident involving those substances has been identified. Always be prepared in situations that are unfamiliar and dangerous and know how to rectify them. Keeping this guide around at all times will ensure that, if you were to come upon a transportation situation involving hazardous substances or dangerous goods, you will be able to help keep others and yourself out of danger. With color-coded pages for quick and easy reference, this is the official manual used by first responders in the United States and Canada for transportation incidents involving dangerous goods or hazardous materials.
Download or read book Fire Safety Education Resource Directory written by Barry Leonard and published by DIANE Publishing. This book was released on 1998-10 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: This compendium of materials will be useful in building and supplementing a public education program for fire safety. Lists a wide range of programs, videotapes, booklets, manuals, pamphlets, brochures, program kits, and web sites that are available from diverse sources throughout the U.S. There are 13 categories: burn and scald prevention, CPR and first aid, electrical hazards, escape plans and drills, fire and the elderly, fire extinguishers, fire safety and the disabled, flammable fabrics, residences, residential fire inspections and home safety, fire safety programs for schools and day care programs, smoke detectors, and other programs.
Download or read book Electric Power Substations Engineering written by John D. McDonald and published by CRC Press. This book was released on 2016-04-19 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combining select chapters from Grigsby's standard-setting The Electric Power Engineering Handbook with several chapters not found in the original work, Electric Power Substations Engineering became widely popular for its comprehensive, tutorial-style treatment of the theory, design, analysis, operation, and protection of power substations. For its
Download or read book Fundamentals of Fire Protection for the Safety Professional written by Lon H. Ferguson and published by Government Institutes. This book was released on 2005-09 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book takes an in-depth look at fire hazards in the workplace - from the substances required to do business to the building construction itself - and provides practical fire-safety principles that can be applied in any work environment. Readers will learn how to develop emergency-action and fire-prevention plans; implement effective alarm, detection, and fire-extinguishment systems; and develop a comprehensive fire-program management plan that is in compliance with FEMA, OSHA, EPA, and NFPA standards." "Each chapter concludes with questions for the reader. Answers to chapter questions and a comprehensive glossary and index are provided at the end of the book."--BOOK JACKET.
Download or read book SFPE Handbook of Fire Protection Engineering written by Philip J. DiNenno and published by National Fire Protection Association (NFPA). This book was released on 1988-01-01 with total page 829 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Electricity written by and published by . This book was released on 1907 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Electric Journal written by and published by . This book was released on 1906 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Marine Fire Prevention Firefighting and Fire Safety written by Maritime Training Advisory Board (U.S.) and published by DIANE Publishing. This book was released on 1994 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive training and reference manual used as a textbook in maritime institutions. Addresses the prevention, control, and extinguishing of fires aboard commercial vessels and on offshore drilling rigs. Includes chapters on emergency procedures and equipment as well as case studies of past shipboard fires. Generously illustrated with drawings, photos, diagrams, tables, and checklists. Recommended reading for all maritime personnel and kept both in shipboard reference libraries and in the offices of maritime executives.
Download or read book Ignition Handbook written by Vytenis Babrauskas and published by Fire Science Pub. This book was released on 2003-01-01 with total page 1116 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the publisher's website: "The Handbook is a massive resource, consisting of 1116 pages, tightly set in a 2-column, 8.5" x 11" (215 x 280 mm) format. The book includes 627 black-and-white figures, 447 tables, and 140 color plates. The Handbook is divided into two main sections: Chapters 1 through 13 include presentations of the fundamental principles of ignition sources and of the response of ignitable materials to heat or energy in various forms. Chapters 14 and 15 constitute an "encyclopedia of ignition," containing extensive information on individual materials, devices, and products. Chapter 14 comprises alphabetically-arranged narrative descriptions of ignition properties and hazards for substances ranging from "Accelerants in incendiary fires" to "Zirconium." Chapter 15 contains database tables giving information on 473 pure chemical compounds and over 500 commercial or natural products, including such substances as dusts, fuels, lubricants, plastics, and woods."
