Download or read book Finite Elements and Fast Iterative Solvers with Applications in Incompressible Fluid Dynamics written by Howard C. Elman and published by OUP Oxford. This book was released on 2005-05-19 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors' intended audience is at the level of graduate students and researchers, and we believe that the text offers a valuable contribution to all finite element researchers who would like to broadened both their fundamental and applied knowledge of the field. - Spencer J. Sherwin and Robert M. Kirby, Fluid Mechanics, Vol 557, 2006.
Download or read book Finite Elements and Fast Iterative Solvers written by Howard Elman and published by OUP Oxford. This book was released on 2014-06-19 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a description of why and how to do Scientific Computing for fundamental models of fluid flow. It contains introduction, motivation, analysis, and algorithms and is closely tied to freely available MATLAB codes that implement the methods described. The focus is on finite element approximation methods and fast iterative solution methods for the consequent linear(ized) systems arising in important problems that model incompressible fluid flow. The problems addressed are the Poisson equation, Convection-Diffusion problem, Stokes problem and Navier-Stokes problem, including new material on time-dependent problems and models of multi-physics. The corresponding iterative algebra based on preconditioned Krylov subspace and multigrid techniques is for symmetric and positive definite, nonsymmetric positive definite, symmetric indefinite and nonsymmetric indefinite matrix systems respectively. For each problem and associated solvers there is a description of how to compute together with theoretical analysis that guides the choice of approaches and describes what happens in practice in the many illustrative numerical results throughout the book (computed with the freely downloadable IFISS software). All of the numerical results should be reproducible by readers who have access to MATLAB and there is considerable scope for experimentation in the "computational laboratory " provided by the software. Developments in the field since the first edition was published have been represented in three new chapters covering optimization with PDE constraints (Chapter 5); solution of unsteady Navier-Stokes equations (Chapter 10); solution of models of buoyancy-driven flow (Chapter 11). Each chapter has many theoretical problems and practical computer exercises that involve the use of the IFISS software. This book is suitable as an introduction to iterative linear solvers or more generally as a model of Scientific Computing at an advanced undergraduate or beginning graduate level.
Download or read book Finite Elements and Fast Iterative Solvers written by Howard C. Elman and published by . This book was released on 2014 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of this book is the efficient solution of partial differential equations (PDEs) that arise when modelling incompressible fluid flow. The first part covers the Poisson and the Stokes equations. For each PDE, there is a chapter concerned with finite element discretization and a companion chapter concerned with efficient iterative solution of the algebraic equations obtained from discretization. Chapter 5 describes the basics of PDE-constrained optimization. The second part of the book is a more advanced introduction to the numerical analysis of incompressible flows.
Download or read book Finite Elements and Fast Iterative Solutions written by Howard C. Elman and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introduction to finite elements, iterative linear solvers and scientific computing includes theoretical problems and practical exercises closely tied with freely downloadable MATLAB software.
Download or read book Finite Elements and Fast Iterative Solvers written by Howard Elman and published by OUP Oxford. This book was released on 2014-06-19 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a description of why and how to do Scientific Computing for fundamental models of fluid flow. It contains introduction, motivation, analysis, and algorithms and is closely tied to freely available MATLAB codes that implement the methods described. The focus is on finite element approximation methods and fast iterative solution methods for the consequent linear(ized) systems arising in important problems that model incompressible fluid flow. The problems addressed are the Poisson equation, Convection-Diffusion problem, Stokes problem and Navier-Stokes problem, including new material on time-dependent problems and models of multi-physics. The corresponding iterative algebra based on preconditioned Krylov subspace and multigrid techniques is for symmetric and positive definite, nonsymmetric positive definite, symmetric indefinite and nonsymmetric indefinite matrix systems respectively. For each problem and associated solvers there is a description of how to compute together with theoretical analysis that guides the choice of approaches and describes what happens in practice in the many illustrative numerical results throughout the book (computed with the freely downloadable IFISS software). All of the numerical results should be reproducible by readers who have access to MATLAB and there is considerable scope for experimentation in the "computational laboratory " provided by the software. Developments in the field since the first edition was published have been represented in three new chapters covering optimization with PDE constraints (Chapter 5); solution of unsteady Navier-Stokes equations (Chapter 10); solution of models of buoyancy-driven flow (Chapter 11). Each chapter has many theoretical problems and practical computer exercises that involve the use of the IFISS software. This book is suitable as an introduction to iterative linear solvers or more generally as a model of Scientific Computing at an advanced undergraduate or beginning graduate level.
Download or read book The Finite Element Method for Fluid Dynamics written by O. C. Zienkiewicz and published by Elsevier. This book was released on 2005-12-08 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dealing with general problems in fluid mechanics, convection diffusion, compressible and incompressible laminar and turbulent flow, shallow water flows and waves, this is the leading text and reference for engineers working with fluid dynamics in fields including aerospace engineering, vehicle design, thermal engineering and many other engineering applications. The new edition is a complete fluids text and reference in its own right. Along with its companion volumes it forms part of the indispensable Finite Element Method series. New material in this edition includes sub-grid scale modelling; artificial compressibility; full new chapters on turbulent flows, free surface flows and porous medium flows; expanded shallow water flows plus long, medium and short waves; and advances in parallel computing. A complete, stand-alone reference on fluid mechanics applications of the FEM for mechanical, aeronautical, automotive, marine, chemical and civil engineers. Extensive new coverage of turbulent flow and free surface treatments
Download or read book Discontinuous Finite Elements in Fluid Dynamics and Heat Transfer written by Ben Q. Li and published by Springer Science & Business Media. This book was released on 2006-06-29 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past several years, significant advances have been made in developing the discontinuous Galerkin finite element method for applications in fluid flow and heat transfer. Certain unique features of the method have made it attractive as an alternative for other popular methods such as finite volume and finite elements in thermal fluids engineering analyses. This book is written as an introductory textbook on the discontinuous finite element method for senior undergraduate and graduate students in the area of thermal science and fluid dynamics. It also can be used as a reference book for researchers and engineers who intend to use the method for research in computational fluid dynamics and heat transfer. A good portion of this book has been used in a course for computational fluid dynamics and heat transfer for senior undergraduate and first year graduate students. It also has been used by some graduate students for self-study of the basics of discontinuous finite elements. This monograph assumes that readers have a basic understanding of thermodynamics, fluid mechanics and heat transfer and some background in numerical analysis. Knowledge of continuous finite elements is not necessary but will be helpful. The book covers the application of the method for the simulation of both macroscopic and micro/nanoscale fluid flow and heat transfer phenomena.
Download or read book Numerical Methods for Two phase Incompressible Flows written by Sven Gross and published by Springer Science & Business Media. This book was released on 2011-04-26 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first monograph providing an introduction to and an overview of numerical methods for the simulation of two-phase incompressible flows. The Navier-Stokes equations describing the fluid dynamics are examined in combination with models for mass and surfactant transport. The book pursues a comprehensive approach: important modeling issues are treated, appropriate weak formulations are derived, level set and finite element discretization techniques are analyzed, efficient iterative solvers are investigated, implementational aspects are considered and the results of numerical experiments are presented. The book is aimed at M Sc and PhD students and other researchers in the fields of Numerical Analysis and Computational Engineering Science interested in the numerical treatment of two-phase incompressible flows.
Download or read book Finite Element Methods for Flow Problems written by Jean Donea and published by John Wiley & Sons. This book was released on 2003-06-02 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die Finite-Elemente-Methode, eines der wichtigsten in der Technik verwendeten numerischen Näherungsverfahren, wird hier gründlich und gut verständlich, aber ohne ein Zuviel an mathematischem Formalismus abgehandelt. Insbesondere geht es um die Anwendung der Methode auf Strömungsprobleme. Alle wesentlichen aktuellen Forschungsergebnisse wurden in den Band aufgenommen; viele davon sind bisher nur verstreut in der Originalliteratur zu finden.
Download or read book Iterative Solvers and Preconditioners for Fully Coupled Finite Element Formulations of Incompressible Fluid Mechanics and Related Transport Problems written by and published by . This book was released on 2002 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Finite Element Method in Heat Transfer and Fluid Dynamics written by J. N. Reddy and published by CRC Press. This book was released on 2010-04-06 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: As Computational Fluid Dynamics (CFD) and Computational Heat Transfer (CHT) evolve and become increasingly important in standard engineering design and analysis practice, users require a solid understanding of mechanics and numerical methods to make optimal use of available software. The Finite Element Method in Heat Transfer and Fluid Dynamics, Th
Download or read book Finite Element Methods for Fluids written by Olivier Pironneau and published by . This book was released on 1989 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces the formulation of problems in fuild mechanics and dynamics, and shows how they can be analyzed and resolved using finite element methods. This practical book also discusses the equations of fluid mechanics and investigates the problems to which these equations can be applied, as well as how they can be analyzed and solved. Contains illustrations of computer simulations using the methods described in the book and features numerous illustrations.
Download or read book Mixed Finite Element Methods and Applications written by Daniele Boffi and published by Springer Science & Business Media. This book was released on 2013-07-02 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-standard finite element methods, in particular mixed methods, are central to many applications. In this text the authors, Boffi, Brezzi and Fortin present a general framework, starting with a finite dimensional presentation, then moving on to formulation in Hilbert spaces and finally considering approximations, including stabilized methods and eigenvalue problems. This book also provides an introduction to standard finite element approximations, followed by the construction of elements for the approximation of mixed formulations in H(div) and H(curl). The general theory is applied to some classical examples: Dirichlet's problem, Stokes' problem, plate problems, elasticity and electromagnetism.
Download or read book Principles of Computational Fluid Dynamics written by Pieter Wesseling and published by Springer Science & Business Media. This book was released on 2009-12-21 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date book gives an account of the present state of the art of numerical methods employed in computational fluid dynamics. The underlying numerical principles are treated in some detail, using elementary methods. The author gives many pointers to the current literature, facilitating further study. This book will become the standard reference for CFD for the next 20 years.
Download or read book Finite Element Methods for Computational Fluid Dynamics written by Dmitri Kuzmin and published by SIAM. This book was released on 2014-12-18 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This informal introduction to computational fluid dynamics and practical guide to numerical simulation of transport phenomena covers the derivation of the governing equations, construction of finite element approximations, and qualitative properties of numerical solutions, among other topics. To make the book accessible to readers with diverse interests and backgrounds, the authors begin at a basic level and advance to numerical tools for increasingly difficult flow problems, emphasizing practical implementation rather than mathematical theory.?Finite Element Methods for Computational Fluid Dynamics: A Practical Guide?explains the basics of the finite element method (FEM) in the context of simple model problems, illustrated by numerical examples. It comprehensively reviews stabilization techniques for convection-dominated transport problems, introducing the reader to streamline diffusion methods, Petrov?Galerkin approximations, Taylor?Galerkin schemes, flux-corrected transport algorithms, and other nonlinear high-resolution schemes, and covers Petrov?Galerkin stabilization, classical projection schemes, Schur complement solvers, and the implementation of the k-epsilon turbulence model in its presentation of the FEM for incompressible flow problem. The book also describes the open-source finite element library ELMER, which is recommended as a software development kit for advanced applications in an online component.?
Download or read book Direct Methods for Sparse Matrices written by Iain S. Duff and published by Oxford University Press. This book was released on 2017 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of sparse matrices has its root in such diverse fields as management science, power systems analysis, surveying, circuit theory, and structural analysis. Efficient use of sparsity is a key to solving large problems in many fields. This book provides both insight and answers for those attempting to solve these problems.
Download or read book Modern Fortran Explained written by Michael Metcalf and published by Oxford University Press. This book was released on 2018-08-23 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fortran marches on, remaining one of the principal programming languages used in high-performance scientific, numerical, and engineering computing. A series of significant revisions to the standard versions of the language have progressively enhanced its capabilities, and the latest standard - Fortran 2018 - includes many additions and improvements. This edition of Modern Fortran Explained expands on the last. Given the release of updated versions of Fortran compilers, the separate descriptions of Fortran 2003 and Fortran 2008 have been incorporated into the main text, which thereby becomes a unified description of the full Fortran 2008 version of the language. This clearer standard has allowed many deficiencies and irregularities in the earlier language versions to be resolved. Four new chapters describe the additional features of Fortran 2018, with its enhancements to coarrays for parallel programming, interoperability with C, IEEE arithmetic, and various other improvements. Written by leading experts in the field, two of whom have actively contributed to Fortran 2018, this is a complete and authoritative description of Fortran in its latest form. It is intended for new and existing users of the language, and for all those involved in scientific and numerical computing. It is suitable as a textbook for teaching and, with its index, as a handy reference for practitioners.