Download or read book Finite element modeling of multipass GMA welds in steel plates Sandia National Labs Albuquerque NM written by and published by . This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Finite Element Modeling of Multipass GMA Welds in Steel Plates written by and published by . This book was released on 1995 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distortions from gas metal arc (GMA) multipass welds of thick steel plates were measured in experiments and calculated using finite element analysis. Two- and three-dimensional finite element simulations were compared with the experimentally measured in-plane distortions in a 2-3/4 in. thick steel plate. Thermal analyses were performed using 2D models of the weld cross-section. These temperature histories were used for 2D and 3D mechanical analyses. Data for verification of thermal analyses included weld cross-sections, weld pool crater shape from power-off tests, and embedded and surface thermocouple temperature histories. Mechanical analyses were verified using caliper measurements of shrinkage transverse to the weld and strain gage measurements. Calculated in-plane shrinkage from the 3D model for 4 passes compared well with caliper measurements of a test specimen's distortion. Two-dimensional mechanical analyses were not capable of predicting the accumulation of shrinkage occurring after the first pass.
Download or read book Simulation of Material Processing Theory Methods and Application written by Ken-ichiro Mori and published by CRC Press. This book was released on 2001-01-01 with total page 1170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains about 180 papers including seven keynotes presented at the 7th NUMIFORM Conference. It reflects the state-of-the-art of simulation of industrial forming processes such as rolling, forging, sheet metal forming, injection moulding and casting.
Download or read book Computational Welding Mechanics written by Lars-Erik Lindgren and published by Elsevier. This book was released on 2014-01-23 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational welding mechanics (CWM) provides an important technique for modelling welding processes. Welding simulations are a key tool in improving the design and control of welding processes and the performance of welded components or structures. CWM can be used to model phenomena such as heat generation, thermal stresses and large plastic deformations of components or structures. It also has a wider application in modelling thermomechanical and microstructural phenomena in metals. This important book reviews the principles, methods and applications of CWM. The book begins by discussing the physics of welding before going on to review modelling methods and options as well as validation techniques. It also reviews applications in areas such as fatigue, buckling and deformation, improved service life of components and process optimisation. Some of the numerical methods described in the book are illustrated using software available from the author which allows readers to explore CWM in more depth. Computational welding mechanics is a standard work for welding engineers and all those researching welding processes and wider thermomechanical and microstructural phenomena in metals. Highlights the principles, methods and applications of CWM Discusses the physics of welding Assesses modelling methods and validation techniques
Download or read book Comprehensive Structural Integrity written by Ian Milne and published by Elsevier. This book was released on 2003-07-25 with total page 4647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this major reference work is to provide a first point of entry to the literature for the researchers in any field relating to structural integrity in the form of a definitive research/reference tool which links the various sub-disciplines that comprise the whole of structural integrity. Special emphasis will be given to the interaction between mechanics and materials and structural integrity applications. Because of the interdisciplinary and applied nature of the work, it will be of interest to mechanical engineers and materials scientists from both academic and industrial backgrounds including bioengineering, interface engineering and nanotechnology. The scope of this work encompasses, but is not restricted to: fracture mechanics, fatigue, creep, materials, dynamics, environmental degradation, numerical methods, failure mechanisms and damage mechanics, interfacial fracture and nano-technology, structural analysis, surface behaviour and heart valves. The structures under consideration include: pressure vessels and piping, off-shore structures, gas installations and pipelines, chemical plants, aircraft, railways, bridges, plates and shells, electronic circuits, interfaces, nanotechnology, artificial organs, biomaterial prostheses, cast structures, mining... and more. Case studies will form an integral part of the work.
Download or read book Residual Stresses 2016 written by Thomas M. Holden and published by Materials Research Forum LLC. This book was released on 2017-03-15 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the International Conference on Residual Stresses 10 and is devoted to the prediction/modelling, evaluation, control, and application of residual stresses in engineering materials. New developments, on stress-measurement techniques, on modelling and prediction of residual stresses and on progress made in the fundamental understanding of the relation between the state of residual stress and the material properties, are highlighted. The proceedings offer an overview of the current understanding of the role of residual stresses in materials used in wide ranging application areas.
Download or read book Comprehensive Structural Integrity written by I. Milne and published by Elsevier. This book was released on 2003 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Trends in Welding Research 2012 Proceedings of the 9th International Conference written by Tarasankar DebRoy, Stan A. David, John N. DuPont, Toshihiko Koseki, Harry K. Bhadeshia and published by ASM International. This book was released on 2013-03-01 with total page 1117 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Trends conference attracts the world's leading welding researchers. Topics covered in this volume include friction stir welding, sensing, control and automation, microstructure and properties, welding processes, procedures and consumables, weldability, modeling, phase transformations, residual stress and distortion, physical processes in welding, and properties and structural integrity of weldments.
Download or read book Approximate Methods in the Design and Analysis of Pressure Vessels and Piping Components 1997 written by W. J. Bees and published by . This book was released on 1997 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains 29 papers presented in three sessions of the July 1997 conference: mechanical integrity of equipment in pressure swing adsorption service; valve and piping dynamics; weld residual stresses; and power plant piping and support. Topics include an overview of PSA vessel technology, including gu
Download or read book Pulse Current Gas Metal Arc Welding written by Prakriti Kumar Ghosh and published by Springer. This book was released on 2017-04-05 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph is a first-of-its-kind compilation on high deposition pulse current GMAW process. The nine chapters of this monograph may serve as a comprehensive knowledge tool to use advanced welding engineering in prospective applications. The contents of this book will prove useful to the shop floor welding engineer in handling this otherwise critical welding process with confidence. It will also serve to inspire researchers to think critically on more versatile applications of the unique nature of pulse current in GMAW process to develop cutting edge welding technology.
Download or read book Thermo Mechanical Modeling of Additive Manufacturing written by Michael Gouge and published by Butterworth-Heinemann. This book was released on 2017-08-03 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermo-mechanical Modeling of Additive Manufacturing provides the background, methodology and description of modeling techniques to enable the reader to perform their own accurate and reliable simulations of any additive process. Part I provides an in depth introduction to the fundamentals of additive manufacturing modeling, a description of adaptive mesh strategies, a thorough description of thermal losses and a discussion of residual stress and distortion. Part II applies the engineering fundamentals to direct energy deposition processes including laser cladding, LENS builds, large electron beam parts and an exploration of residual stress and deformation mitigation strategies. Part III concerns the thermo-mechanical modeling of powder bed processes with a description of the heat input model, classical thermo-mechanical modeling, and part scale modeling. The book serves as an essential reference for engineers and technicians in both industry and academia, performing both research and full-scale production. Additive manufacturing processes are revolutionizing production throughout industry. These technologies enable the cost-effective manufacture of small lot parts, rapid repair of damaged components and construction of previously impossible-to-produce geometries. However, the large thermal gradients inherent in these processes incur large residual stresses and mechanical distortion, which can push the finished component out of engineering tolerance. Costly trial-and-error methods are commonly used for failure mitigation. Finite element modeling provides a compelling alternative, allowing for the prediction of residual stresses and distortion, and thus a tool to investigate methods of failure mitigation prior to building. Provides understanding of important components in the finite element modeling of additive manufacturing processes necessary to obtain accurate results Offers a deeper understanding of how the thermal gradients inherent in additive manufacturing induce distortion and residual stresses, and how to mitigate these undesirable phenomena Includes a set of strategies for the modeler to improve computational efficiency when simulating various additive manufacturing processes Serves as an essential reference for engineers and technicians in both industry and academia
Download or read book Study of Finite Element Modelling of Multipass Welds written by and published by . This book was released on 1986 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The initial objective was to develop a finite element model to predict weldresidual stress, with special emphasis on multipass weldments. Asubsequent objective was to investigate how weld passes interact in a multi-pass weld. A simplified but reliable analysis procedure for theprediction of the final residual stress state in a multi-pass weld wassought The use of a commercial finite element package called ABAQUS [1.1]was examined. The package was modified to meet the needs of the study.
Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis of Welded Structures written by Koichi Masubuchi and published by Elsevier. This book was released on 2013-10-22 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis of Welded Structures: Residual Stresses, Distortion, and their Consequences encompasses several topics related to design and fabrication of welded structures, particularly residual stresses and distortion, as well as their consequences. This book first introduces the subject by presenting the advantages and disadvantages of welded structures, as well as the historical overview of the topic and predicted trends. Then, this text considers residual stresses, heat flow, distortion, fracture toughness, and brittle and fatigue fractures of weldments. This selection concludes by discussing the effects of distortion and residual stresses on buckling strength of welded structures and effects of weld defects on service behavior. This book also provides supplementary discussions on some related and selected subjects. This text will be invaluable to metallurgists, welders, and students of metallurgy and welding.
Download or read book Springer Handbook of Mechanical Engineering written by Karl-Heinrich Grote and published by Springer Science & Business Media. This book was released on 2009-01-13 with total page 1588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This resource covers all areas of interest for the practicing engineer as well as for the student at various levels and educational institutions. It features the work of authors from all over the world who have contributed their expertise and support the globally working engineer in finding a solution for today‘s mechanical engineering problems. Each subject is discussed in detail and supported by numerous figures and tables.
Download or read book Transactions of JWRI written by 大阪大学. 溶接工学研究所 and published by . This book was released on 2004 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the ASME Pressure Vessels and Piping Conference 2005 Materials and fabrication written by and published by . This book was released on 2005 with total page 998 pages. Available in PDF, EPUB and Kindle. Book excerpt:
