Download or read book Finite Element Modeling of I C Engine Component Temperatures written by James F. Wiedenhoefer and published by . This book was released on 1999 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thesis submitted in partial fulfillment of the requirements for the degree of Master of Science (Mechanical Engineering).
Download or read book Thermal Analysis of Vehicle Engine written by Mohd Fauzie Ramli and published by . This book was released on 2009 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis deals with thermal analysis in internal combustion engine. The objective of this thesis is to develop finite element model of combustion chamber for thermal analysis, to obtain the temperature distribution in combustion chamber and its surrounding component, and to determine localized temperature region in the engine.Finite element method (FEM) was employed to develop computational model to analyze the temperature distribution in the engine components and to identify the critical temperature in the components. Computational domain consists of combustion chamber as major part and its surrounding components such as valves, and exhaust port and water jacket. Two types of combustion process were modelled: Spark ignition engine and compression ignition engine. 2-dimensional (2D) simplified models was developed using general-purpose FE code, ALGOR. The element type was 2D element. Material properties were taken from ALGOR library. Heat convection due to the presence of water was defined by convection coefficient. Thermal load due to combustion was defined to all nodes of combustion chamber. The finite element models were analyzed using the thermal transient heat transfer analysis. The finite element model was validated by comparing the maximum temperature at the piston surface with the published result. The results were found to be agreeable. The computed results indicate that the exhaust part may reach the highest maximum temperature in the engine after combustion occurred. In SI engine, the critical component in thermal effect is the cylinder head and for the CI engine is at the piston bowl. Furthermore, the material used to construct the engine part strongly influences the temperature distribution in the engine. Therefore, the performance of the engine at very high temperature can be improved by changing material and design of component. From the analysis, the capability of diesel engine to resist thermal contact is higher compare to gasoline engine because of using higher thermal resistance material with suitable shape and geometry design.
Download or read book I C Engines And Combustion written by and published by Allied Publishers. This book was released on with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engine Modeling and Simulation written by Avinash Kumar Agarwal and published by Springer Nature. This book was released on 2021-12-16 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the simulation and modeling of internal combustion engines. The contents include various aspects of diesel and gasoline engine modeling and simulation such as spray, combustion, ignition, in-cylinder phenomena, emissions, exhaust heat recovery. It also explored engine models and analysis of cylinder bore piston stresses and temperature effects. This book includes recent literature and focuses on current modeling and simulation trends for internal combustion engines. Readers will gain knowledge about engine process simulation and modeling, helpful for the development of efficient and emission-free engines. A few chapters highlight the review of state-of-the-art models for spray, combustion, and emissions, focusing on the theory, models, and their applications from an engine point of view. This volume would be of interest to professionals, post-graduate students involved in alternative fuels, IC engines, engine modeling and simulation, and environmental research.
Download or read book Introduction to Internal Combustion Engines written by Richard Stone and published by Bloomsbury Publishing. This book was released on 2017-09-16 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its fourth edition, this textbook remains the indispensable text to guide readers through automotive or mechanical engineering, both at university and beyond. Thoroughly updated, clear, comprehensive and well-illustrated, with a wealth of worked examples and problems, its combination of theory and applied practice aids in the understanding of internal combustion engines, from thermodynamics and combustion to fluid mechanics and materials science. This textbook is aimed at third year undergraduate or postgraduate students on mechanical or automotive engineering degrees. New to this Edition: - Fully updated for changes in technology in this fast-moving area - New material on direct injection spark engines, supercharging and renewable fuels - Solutions manual online for lecturers
Download or read book Internal Combustion Engine Handbook written by Richard Van Basshuysen and published by SAE International. This book was released on 2016-03-07 with total page 1152 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than 120 authors from science and industry have documented this essential resource for students, practitioners, and professionals. Comprehensively covering the development of the internal combustion engine (ICE), the information presented captures expert knowledge and serves as an essential resource that illustrates the latest level of knowledge about engine development. Particular attention is paid toward the most up-to-date theory and practice addressing thermodynamic principles, engine components, fuels, and emissions. Details and data cover classification and characteristics of reciprocating engines, along with fundamentals about diesel and spark ignition internal combustion engines, including insightful perspectives about the history, components, and complexities of the present-day and future IC engines. Chapter highlights include: • Classification of reciprocating engines • Friction and Lubrication • Power, efficiency, fuel consumption • Sensors, actuators, and electronics • Cooling and emissions • Hybrid drive systems Nearly 1,800 illustrations and more than 1,300 bibliographic references provide added value to this extensive study. “Although a large number of technical books deal with certain aspects of the internal combustion engine, there has been no publication until now that covers all of the major aspects of diesel and SI engines.” Dr.-Ing. E. h. Richard van Basshuysen and Professor Dr.-Ing. Fred Schäfer, the editors, “Internal Combustion Engines Handbook: Basics, Components, Systems, and Perpsectives”
Download or read book A dynamic and statistical analysis of the temperature and fatigue behavior of a race power unit The effect of different thermodynamic states written by Hölz, Peter and published by KIT Scientific Publishing. This book was released on 2020-07-08 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engine Structures written by and published by . This book was released on 1988 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Extended Finite Element Method written by Amir R. Khoei and published by John Wiley & Sons. This book was released on 2015-02-23 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces the theory and applications of the extended finite element method (XFEM) in the linear and nonlinear problems of continua, structures and geomechanics Explores the concept of partition of unity, various enrichment functions, and fundamentals of XFEM formulation. Covers numerous applications of XFEM including fracture mechanics, large deformation, plasticity, multiphase flow, hydraulic fracturing and contact problems Accompanied by a website hosting source code and examples
Download or read book Finite Element Modeling and Simulation with ANSYS Workbench Second Edition written by Xiaolin Chen and published by CRC Press. This book was released on 2018-09-05 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite Element Modeling and Simulation with ANSYS Workbench 18, Second Edition, combines finite element theory with real-world practice. Providing an introduction to finite element modeling and analysis for those with no prior experience, and written by authors with a combined experience of 30 years teaching the subject, this text presents FEM formulations integrated with relevant hands-on instructions for using ANSYS Workbench 18. Incorporating the basic theories of FEA, simulation case studies, and the use of ANSYS Workbench in the modeling of engineering problems, the book also establishes the finite element method as a powerful numerical tool in engineering design and analysis. Features Uses ANSYS WorkbenchTM 18, which integrates the ANSYS SpaceClaim Direct ModelerTM into common simulation workflows for ease of use and rapid geometry manipulation, as the FEA environment, with full-color screen shots and diagrams. Covers fundamental concepts and practical knowledge of finite element modeling and simulation, with full-color graphics throughout. Contains numerous simulation case studies, demonstrated in a step-by-step fashion. Includes web-based simulation files for ANSYS Workbench 18 examples. Provides analyses of trusses, beams, frames, plane stress and strain problems, plates and shells, 3-D design components, and assembly structures, as well as analyses of thermal and fluid problems.
Download or read book Reciprocating Engine Combustion Diagnostics written by Rakesh Kumar Maurya and published by Springer. This book was released on 2019-03-19 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with in-cylinder pressure measurement and its post-processing for combustion quality analysis of conventional and advanced reciprocating engines. It offers insight into knocking and combustion stability analysis techniques and algorithms in SI, CI, and LTC engines, and places special emphasis on the digital signal processing of in-cylinder pressure signal for online and offline applications. The text gives a detailed description on sensors for combustion measurement, data acquisition, and methods for estimation of performance and combustion parameters. The information provided in this book enhances readers’ basic knowledge of engine combustion diagnostics and serves as a comprehensive, ready reference for a broad audience including graduate students, course instructors, researchers, and practicing engineers in the automotive, oil and other industries concerned with internal combustion engines.
Download or read book FINITE ELEMENT METHODS written by CHENNAKESAVA R. ALAVALA and published by PHI Learning Pvt. Ltd.. This book was released on 2008-11-10 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite Element Methods form an indispensable part of engineering analysis and design. The strength of FEM is the ease and elegance with which it handles the boundary conditions. This compact and well-organized text presents a comprehensive analysis of Finite Element Methods (FEM). The book gives a clear picture of structural, torsion, free-vibration, heat transfer and fluid flow problems. It also provides detailed description of equations of equilibrium, stress-strain relations, interpolation functions and element design, symmetry and applications of FEM. The text is a synthesis of both the physical and the mathematical characteristics of finite element methods. A question bank at the end of each chapter comprises descriptive and objective type questions to drill the students in self-study. KEY FEATURES Includes step-by-step procedure to solve typical problems using ANSYS® software. Gives numerical problems in SI units. Elaborates shaper functions for higher-order elements. Furnishes a large number of worked-out examples and solved problems. This profusely illustrated, student-friendly text is intended primarily for undergraduate students of Mechanical/Production/Civil and Aeronautical Engineering. By a judicious selection of topics, it can also be profitably used by postgraduate students of these disciplines. In addition, practising engineers and scientists should find it very useful besides students preparing for competitive exams.
Download or read book 5th International Symposium on Ceramic Materials and Components for Engines Shanghai China 29 May 1 June 1994 written by X. R. Fu and published by World Scientific. This book was released on 1994 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Current Advances in Mechanical Engineering written by Saroj Kumar Acharya and published by Springer Nature. This book was released on 2021-03-18 with total page 991 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Recent Advances in Mechanical Engineering Research and Development (ICRAMERD 2020). The contents focus on latest research and current problems in various branches of mechanical engineering. Some of the topics discussed here include fracture and failure analysis, fuels and alternative fuels, combustion and IC engines, advanced manufacturing technologies, powder metallurgy and rapid prototyping, industrial engineering and automation, supply chain management, design of mechanical systems, vibrations and control engineering, automobile engineering, fluid mechanics and machines, heat transfer, composite materials, micro and nano-engineering for energy storage and conversion, and modeling and simulations. The wide range of topics presented in this book can make it useful for beginners, researchers as well as professionals in mechanical engineering.
Download or read book Emerging Trends in Mechanical Engineering written by L. Vijayaraghavan and published by Springer Nature. This book was released on 2019-12-11 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the International Conference on Emerging Trends in Mechanical Engineering (ICETME 2018). The book covers various topics of mechanical engineering like computational fluid dynamics, heat transfer, machine dynamics, tribology, and composite materials. In addition, relevant studies in the allied fields of manufacturing, industrial and production engineering are also covered. The applications of latest tools and techniques in the context of mechanical engineering problems are discussed in this book. The contents of this book will be useful for students, researchers as well as industry professionals.
Download or read book 1D and Multi D Modeling Techniques for IC Engine Simulation written by Angelo Onorati and published by SAE International. This book was released on 2020-04-06 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1D and Multi-D Modeling Techniques for IC Engine Simulation provides a description of the most significant and recent achievements in the field of 1D engine simulation models and coupled 1D-3D modeling techniques, including 0D combustion models, quasi-3D methods and some 3D model applications.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1991-10 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt:
