Download or read book Finite Element Methods for Nonlinear Optical Waveguides written by Xin-Hua Wang and published by Routledge. This book was released on 2019-06-14 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides researchers at the forefront of nonlinear optical technologies with robust procedures and software for the systematic investigation of the fundamental phenomena in nonlinear optical waveguide structures. A full vectorial electromagnetic formulation is adopted and the conditions under which simplification to a scalar formulation is possible are clearly indicated. The need to model the dielectric saturation properly is identified, and improved algorithms are presented for obtaining the complete power dispersion curve of structures exhibiting bistability. As the stability analysis of nonlinear modes is crucial to the development of nonlinear model methods, an effective procedure to investigate the propagation of the scalar nonlinear waves in 3D is another important feature of the book. All of the procedures described, as well as an automatic mesh generator for the finite element method, are incorporated into a software package which is included with this book.
Download or read book Finite Element Methods for Nonlinear Optical Waveguides written by Xin-Hua Wang and published by Routledge. This book was released on 2019-06-14 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides researchers at the forefront of nonlinear optical technologies with robust procedures and software for the systematic investigation of the fundamental phenomena in nonlinear optical waveguide structures. A full vectorial electromagnetic formulation is adopted and the conditions under which simplification to a scalar formulation is possible are clearly indicated. The need to model the dielectric saturation properly is identified, and improved algorithms are presented for obtaining the complete power dispersion curve of structures exhibiting bistability. As the stability analysis of nonlinear modes is crucial to the development of nonlinear model methods, an effective procedure to investigate the propagation of the scalar nonlinear waves in 3D is another important feature of the book. All of the procedures described, as well as an automatic mesh generator for the finite element method, are incorporated into a software package which is included with this book.
Download or read book Finite Element Methods for Nonlinear Optical Waveguides written by Xinhua Wang and published by . This book was released on 1992 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Waveguide Theory by the Finite Element Method written by Masanori Koshiba and published by Springer. This book was released on 2012-11-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in the field of guided-wave optics, such as fiber optics and integrated optics, have included the introduction of arbitrarily-shaped optical waveguides which, in many cases, also happened to be arbitrarily inhomogeneous, dissipative, anisotropic, and/or nonlinear. Most of such cases of waveguide arbitrariness do not lend themselves to analytical so lutions; hence, computational tools for modeling and simulation are es sential for successful design, optimization, and realization of the optical waveguides. For this purpose, various numerical techniques have been de veloped. In particular, the finite element method (FEM) is a powerful and efficient tool for the most general (i. e. , arbitrarily-shaped, inhomogeneous, dissipative, anisotropic, and nonlinear) optical waveguide problem. Its use in industry and research is extensive, and indeed it could be said that with out it many optical waveguide problems would be incapable of solution. This book is intended for students, engineers, designers, and techni cal managers interested in a detailed description of the FEM for optical waveguide analysis. Starting from a brief review of electromagnetic theory, the first chapter provides the concepts of the FEM and its fundamentals. In addition to conventional elements, i. e. , line elements, triangular elements, tetrahedral elements, ring elements, and triangular ring elements which are utilized for one-dimensional, two-dimensional, three-dimensional, axisymmetric two dimensional, and axisymmetric three-dimensional problems, respectively, special-purpose elements, such as isoparametric elements, edge elements, infinite elements, and boundary elements, are also introduced.
Download or read book Optical Waveguide Theory by the Finite Element Method written by Masanori Koshiba and published by Springer. This book was released on 2014-01-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in the field of guided-wave optics, such as fiber optics and integrated optics, have included the introduction of arbitrarily-shaped optical waveguides which, in many cases, also happened to be arbitrarily inhomogeneous, dissipative, anisotropic, and/or nonlinear. Most of such cases of waveguide arbitrariness do not lend themselves to analytical so lutions; hence, computational tools for modeling and simulation are es sential for successful design, optimization, and realization of the optical waveguides. For this purpose, various numerical techniques have been de veloped. In particular, the finite element method (FEM) is a powerful and efficient tool for the most general (i. e. , arbitrarily-shaped, inhomogeneous, dissipative, anisotropic, and nonlinear) optical waveguide problem. Its use in industry and research is extensive, and indeed it could be said that with out it many optical waveguide problems would be incapable of solution. This book is intended for students, engineers, designers, and techni cal managers interested in a detailed description of the FEM for optical waveguide analysis. Starting from a brief review of electromagnetic theory, the first chapter provides the concepts of the FEM and its fundamentals. In addition to conventional elements, i. e. , line elements, triangular elements, tetrahedral elements, ring elements, and triangular ring elements which are utilized for one-dimensional, two-dimensional, three-dimensional, axisymmetric two dimensional, and axisymmetric three-dimensional problems, respectively, special-purpose elements, such as isoparametric elements, edge elements, infinite elements, and boundary elements, are also introduced.
Download or read book Finite Element Analysis of Two Transverse Dimensional Bistable Nonlinear Integrated Optical Waveguides written by B. M. A. Rahman and published by . This book was released on 1992 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is considerable interest in the study of strong nonlinear effects in integrated optics for use in optical switching. Nonlinear thin films have already been studied extensively by both analytical and numerical techniques. Only in more complex nonlinear waveguides, however, can one obtain very high power density for moderate input power through two-dimensional field confinement in a tiny cross-section.
Download or read book Fundamentals of Optical Waveguides written by Katsunari Okamoto and published by Elsevier. This book was released on 2010-08-04 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Optical Waveguides is an essential resource for any researcher, professional or student involved in optics and communications engineering. Any reader interested in designing or actively working with optical devices must have a firm grasp of the principles of lightwave propagation. Katsunari Okamoto has presented this difficult technology clearly and concisely with several illustrations and equations. Optical theory encompassed in this reference includes coupled mode theory, nonlinear optical effects, finite element method, beam propagation method, staircase concatenation method, along with several central theorems and formulas. Since the publication of the well-received first edition of this book, planar lightwave circuits and photonic crystal fibers have fully matured. With this second edition the advances of these fibers along with other improvements on existing optical technologies are completely detailed. This comprehensive volume enables readers to fully analyze, design and simulate optical atmospheres. - Exceptional new chapter on Arrayed-Waveguide Grating (AWG) - In-depth discussion of Photonic Crystal Fibers (PCFs) - Thorough explanation of Multimode Interference Devices (MMI) - Full coverage of polarization Mode Dispersion (PMD)
Download or read book Anisotropic and Nonlinear Optical Waveguides written by C.G. Someda and published by Elsevier. This book was released on 2012-12-02 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dielectric optical waveguides have been investigated for more than two decades. In the last ten years they have had the unique position of being simultaneously the backbone of a very practical and fully developed technology, as well as an extremely exciting area of basic, forefront research. Existing waveguides can be divided into two sets: one consisting of waveguides which are already in practical use, and the second of those which are still at the laboratory stage of their evolution. This book is divided into two separate parts: the first dealing with anisotropic waveguides, and the second with nonlinear behaviour. Nonlinear behaviour in optical waveguides is a topic of current research interest, an effect eagerly being sought in waveguides. The relative importance of nonlinearity versus anisotropy in theoretical papers changes enormously from problem to problem. Many theories can be quite useful and enlightening even though they neglect entirely one of the two aspects. Scientists may find their research work leading them in the near future to deal simultaneously with anisotropy and nonlinearity in order to pursue their own investigations. This book will be of interest to researchers who first need to understand the individual topics, suitably chosen from the two parts of this work, thus providing them with the necessary ingredients to pursue their explorations.
Download or read book Photonics Modelling and Design written by Slawomir Sujecki and published by CRC Press. This book was released on 2018-09-03 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photonics Modeling and Design delivers a concise introduction to the modeling and design of photonic devices. Assuming a general knowledge of photonics and the operating principles of fibre and semiconductor lasers, this book: Describes the analysis of the light propagation in dielectric media Discusses heat diffusion and carrier transport Applies the presented theory to develop fibre and semiconductor laser models Addresses the propagation of short optical pulses in optical fibres Puts all modeling into practical context with examples of devices currently in development or on the market Providing hands-on guidance in the form of MATLAB® scripts, tips, and other downloadable content, Photonics Modeling and Design is written for students and professionals interested in modeling photonic devices either for gaining a deeper understanding of the operation or to optimize the design.
Download or read book Nonlinear Finite Element Methods written by Peter Wriggers and published by Springer Science & Business Media. This book was released on 2008-09-24 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite element methods have become ever more important to engineers as tools for design and optimization, now even for solving non-linear technological problems. However, several aspects must be considered for finite-element simulations which are specific for non-linear problems: These problems require the knowledge and the understanding of theoretical foundations and their finite-element discretization as well as algorithms for solving the non-linear equations. This book provides the reader with the required knowledge covering the complete field of finite element analyses in solid mechanics. It is written for advanced students in engineering fields but serves also as an introduction into non-linear simulation for the practising engineer.
Download or read book Finite Element Methods for Computational Nonlinear Optics written by Patrick Asebiah Buah and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Finite Element Modeling Methods for Photonics written by B. M. Azizur Rahman and published by Artech House. This book was released on 2013-08-01 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term photonics can be used loosely to refer to a vast array of components, devices, and technologies that in some way involve manipulation of light. One of the most powerful numerical approaches available to engineers developing photonic components and devices is the Finite Element Method (FEM), which can be used to model and simulate such components/devices and analyze how they will behave in response to various outside influences. This resource provides a comprehensive description of the formulation and applications of FEM in photonics applications ranging from telecommunications, astronomy, and sensing, to chemistry, imaging, and biomedical R&D. This book emphasizes practical, problem-solving applications and includes real-world examples to assist readers in understanding how mathematical concepts translate to computer code for finite element-based methods applicable to a range of photonic structures. In addition, this is the perfect support to anyone using the COMSOL Multiphysics© RF Module.
Download or read book The Wave Finite Element Method written by Boris F. Shorr and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational mechanics, as a science employed for the numerical model ing of processes in nature and engineering, has over the last few decades developed two strands. The first concerns the putting of more and more powerful software packages into computational practice, using increas ingly high-performance computers with increasingly large memory. The traditional finite element and finite difference approaches are still preva lent. Over the years however, researchers have met with new problems; their solutions on the basis of traditional methods are at best difficult and at worst impossible to obtain. Such problems provided a powerful impetus in the development of the second strand, resulting in the development of es sentially new approaches for numerical modeling, for example meshless methods, "molecular" dynamics, neuron networks. The current state of the art formed the basis of many papers presented at the Fifth World Congress on Computational Mechanics, Vienna 2002. It is within the framework of the second strand that this book has been written.
Download or read book Computational Photonic Sensors written by Mohamed Farhat O. Hameed and published by Springer. This book was released on 2018-06-13 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the photonic sensing field by covering plasmonics, photonic crystal, and SOI techniques from theory to real sensing applications. A literature review of ultra-sensitive photonic sensors, including their design and application in industry, makes this a self-contained and comprehensive resource for different types of sensors, with high value to the biosensor sector in particular. The book is organized into four parts: Part I covers the basic theory of wave propagation, basic principles of sensing, surface plasmon resonance, and silicon photonics; Part II details the computational modeling techniques for the analysis and prediction of photonic sensors; Part III and Part IV cover the various mechanisms and light matter interaction scenarios behind the design of photonic sensors including photonic crystal fiber sensors and SOI sensors. This book is appropriate for academics and researchers specializing in photonic sensors; graduate students in the early and intermediate stages working in the areas of photonics, sensors, biophysics, and biomedical engineering; and to biomedical, environmental, and chemical engineers.
Download or read book First International Conference on Optical Communications and Networks ICOCN 2002 written by Cambyse Guy Omidyar and published by World Scientific. This book was released on 2002 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical communications networks are becoming increasingly important as there is demand for high capacity links. Dense wavelength division multiplexing (DWDM) is widely deployed at the core networks to accommodate high capacity transport systems. Optical components such as optical amplifiers, tunable filters, transceivers, termination devices and add-drop multiplexers are becoming more reliable and affordable. Access and metropolitan area networks are increasingly built with optical technologies to overcome the electronic bottleneck at network edges. New components and subsystems for very high speed optical networks offer new design options.The proceedings of the First International Conference on Optical Communications and Networks present high quality recent research results in the areas of optical communications, network components, architectures, protocols, planning, design, management and operation.
Download or read book Optical Communications And Networks With Cd rom Proceedings Of The First International Conference On Icocn 2002 written by Cambyse Guy Omidyar and published by World Scientific. This book was released on 2002-10-23 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical communications networks are becoming increasingly important as there is demand for high capacity links. Dense wavelength division multiplexing (DWDM) is widely deployed at the core networks to accommodate high capacity transport systems. Optical components such as optical amplifiers, tunable filters, transceivers, termination devices and add-drop multiplexers are becoming more reliable and affordable. Access and metropolitan area networks are increasingly built with optical technologies to overcome the electronic bottleneck at network edges. New components and subsystems for very high speed optical networks offer new design options.The proceedings of the First International Conference on Optical Communications and Networks present high quality recent research results in the areas of optical communications, network components, architectures, protocols, planning, design, management and operation.
Download or read book Finite Element Study of the Second Order X 2 Non linear Process of Second Harmonic Generation in Optical Waveguides written by Ferdinand Apietu Katsriku and published by . This book was released on 2000 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
