Download or read book Finite Element Methods for Incompressible Flow Problems written by Volker John and published by Springer. This book was released on 2016-10-27 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores finite element methods for incompressible flow problems: Stokes equations, stationary Navier-Stokes equations and time-dependent Navier-Stokes equations. It focuses on numerical analysis, but also discusses the practical use of these methods and includes numerical illustrations. It also provides a comprehensive overview of analytical results for turbulence models. The proofs are presented step by step, allowing readers to more easily understand the analytical techniques.

Download or read book Finite Element Methods for Viscous Incompressible Flows written by Max D. Gunzburger and published by Elsevier. This book was released on 2012-12-02 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite Element Methods for Viscous Incompressible Flows examines mathematical aspects of finite element methods for the approximate solution of incompressible flow problems. The principal goal is to present some of the important mathematical results that are relevant to practical computations. In so doing, useful algorithms are also discussed. Although rigorous results are stated, no detailed proofs are supplied; rather, the intention is to present these results so that they can serve as a guide for the selection and, in certain respects, the implementation of algorithms.

Download or read book Finite Element Methods for Flow Problems written by Jean Donea and published by John Wiley & Sons. This book was released on 2003-06-02 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die Finite-Elemente-Methode, eines der wichtigsten in der Technik verwendeten numerischen Näherungsverfahren, wird hier gründlich und gut verständlich, aber ohne ein Zuviel an mathematischem Formalismus abgehandelt. Insbesondere geht es um die Anwendung der Methode auf Strömungsprobleme. Alle wesentlichen aktuellen Forschungsergebnisse wurden in den Band aufgenommen; viele davon sind bisher nur verstreut in der Originalliteratur zu finden.

Download or read book Finite Element Methods for Computational Fluid Dynamics written by Dmitri Kuzmin and published by SIAM. This book was released on 2014-12-18 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This informal introduction to computational fluid dynamics and practical guide to numerical simulation of transport phenomena covers the derivation of the governing equations, construction of finite element approximations, and qualitative properties of numerical solutions, among other topics. To make the book accessible to readers with diverse interests and backgrounds, the authors begin at a basic level and advance to numerical tools for increasingly difficult flow problems, emphasizing practical implementation rather than mathematical theory.?Finite Element Methods for Computational Fluid Dynamics: A Practical Guide?explains the basics of the finite element method (FEM) in the context of simple model problems, illustrated by numerical examples. It comprehensively reviews stabilization techniques for convection-dominated transport problems, introducing the reader to streamline diffusion methods, Petrov?Galerkin approximations, Taylor?Galerkin schemes, flux-corrected transport algorithms, and other nonlinear high-resolution schemes, and covers Petrov?Galerkin stabilization, classical projection schemes, Schur complement solvers, and the implementation of the k-epsilon turbulence model in its presentation of the FEM for incompressible flow problem. The book also describes the open-source finite element library ELMER, which is recommended as a software development kit for advanced applications in an online component.?

Download or read book Numerical Methods for Two phase Incompressible Flows written by Sven Gross and published by Springer Science & Business Media. This book was released on 2011-04-26 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first monograph providing an introduction to and an overview of numerical methods for the simulation of two-phase incompressible flows. The Navier-Stokes equations describing the fluid dynamics are examined in combination with models for mass and surfactant transport. The book pursues a comprehensive approach: important modeling issues are treated, appropriate weak formulations are derived, level set and finite element discretization techniques are analyzed, efficient iterative solvers are investigated, implementational aspects are considered and the results of numerical experiments are presented. The book is aimed at M Sc and PhD students and other researchers in the fields of Numerical Analysis and Computational Engineering Science interested in the numerical treatment of two-phase incompressible flows.

Download or read book High Order Methods for Incompressible Fluid Flow written by M. O. Deville and published by Cambridge University Press. This book was released on 2002-08-15 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description

Download or read book Characteristics Finite Element Methods in Computational Fluid Dynamics written by Joe Iannelli and published by Springer Science & Business Media. This book was released on 2006-09-24 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details a systematic characteristics-based finite element procedure to investigate incompressible, free-surface and compressible flows. Several sections derive the Fluid Dynamics equations from first thermo-mechanics principles and develop this multi-dimensional and infinite-directional upstream procedure by combining a finite element discretization with an implicit non-linearly stable Runge-Kutta time integration for the numerical solution of the Euler and Navier Stokes equations.

Download or read book Incompressible Flow and the Finite Element Method written by Philip M. Gresho and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Simulation of Incompressible Viscous Flow written by Roland Glowinski and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-09-20 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on finite element-based computational methods for solving incompressible viscous fluid flow problems shows readers how to apply operator splitting techniques to decouple complicated computational fluid dynamics problems into a sequence of relatively simpler sub-problems at each time step, such as hemispherical cavity flow, cavity flow of an Oldroyd-B viscoelastic flow, and particle interaction in an Oldroyd-B type viscoelastic fluid. Efficient and robust numerical methods for solving those resulting simpler sub-problems are introduced and discussed. Interesting computational results are presented to show the capability of methodologies addressed in the book.

Download or read book Implementation of Finite Element Methods for Navier Stokes Equations written by F. Thomasset and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: In structure mechanics analysis, finite element methods are now well estab lished and well documented techniques; their advantage lies in a higher flexibility, in particular for: (i) The representation of arbitrary complicated boundaries; (ii) Systematic rules for the developments of stable numerical schemes ap proximating mathematically wellposed problems, with various types of boundary conditions. On the other hand, compared to finite difference methods, this flexibility is paid by: an increased programming complexity; additional storage require ment. The application of finite element methods to fluid mechanics has been lagging behind and is relatively recent for several types of reasons: (i) Historical reasons: the early methods were invented by engineers for the analysis of torsion, flexion deformation of bearns, plates, shells, etc ... (see the historics in Strang and Fix (1972) or Zienckiewicz (1977». (ii) Technical reasons: fluid flow problems present specific difficulties: strong gradients,l of the velocity or temperature for instance, may occur which a finite mesh is unable to properly represent; a remedy lies in the various upwind finite element schemes which recently turned up, and which are reviewed in chapter 2 (yet their effect is just as controversial as in finite differences). Next, waves can propagate (e.g. in ocean dynamics with shallowwaters equations) which will be falsely distorted by a finite non regular mesh, as Kreiss (1979) pointed out. We are concerned in this course with the approximation of incompressible, viscous, Newtonian fluids, i.e. governed by N avier Stokes equations.

Download or read book Incompressible Flow and the Finite Element Method written by Gresho and published by . This book was released on 1999-05 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Incompressible Flow and the Finite Element Method 2 Volume Set written by P. M. Gresho and published by Wiley. This book was released on 2000-07-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive reference work covers all the important details regarding the application of the finite element method to incompressible flows. It addresses the theoretical background and the detailed development of appropriate numerical methods applied to the solution of a wide range of incompressible flows, beginning with extensive coverage of the advection-diffusion equation in volume one. For both this equation and the equations of principal interest - the Navier-Stokes equations, covered in detail in volume two - detailed discussion of both the continuous and discrete equations is presented, as well as explanations of how to properly march the time-dependent equations using smart implicit methods. Boundary and initial conditions, so important in applications, are carefully described and discussed, including well-posedness. The important role played by the pressure, so confusing in the past, is carefully explained. Together, this two volume work explains and emphasizes consistency in six areas: * consistent mass matrix * consistent pressure Poisson equation * consistent penalty methods * consistent normal direction * consistent heat flux * consistent forces Fully indexed and referenced, this book is an essential reference tool for all researchers, students and applied scientists in incompressible fluid mechanics.

Download or read book Least Squares Finite Element Methods written by Pavel B. Bochev and published by Springer Science & Business Media. This book was released on 2009-04-28 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their emergence, finite element methods have taken a place as one of the most versatile and powerful methodologies for the approximate numerical solution of Partial Differential Equations. These methods are used in incompressible fluid flow, heat, transfer, and other problems. This book provides researchers and practitioners with a concise guide to the theory and practice of least-square finite element methods, their strengths and weaknesses, established successes, and open problems.

Download or read book Finite Element Methods in Incompressible Adiabatic and Compressible Flows written by Mutsuto Kawahara and published by Springer. This book was released on 2016-04-04 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the finite element method in fluid flows. It is targeted at researchers, from those just starting out up to practitioners with some experience. Part I is devoted to the beginners who are already familiar with elementary calculus. Precise concepts of the finite element method remitted in the field of analysis of fluid flow are stated, starting with spring structures, which are most suitable to show the concepts of superposition/assembling. Pipeline system and potential flow sections show the linear problem. The advection–diffusion section presents the time-dependent problem; mixed interpolation is explained using creeping flows, and elementary computer programs by FORTRAN are included. Part II provides information on recent computational methods and their applications to practical problems. Theories of Streamline-Upwind/Petrov–Galerkin (SUPG) formulation, characteristic formulation, and Arbitrary Lagrangian–Eulerian (ALE) formulation and others are presented with practical results solved by those methods.

Download or read book Finite Element Analysis of Non Newtonian Flow written by Hou-Cheng Huang and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: A follow on from the author's work "Finite Elements in Heat Transfer" which we published 11/94, and which is a powerful CFD programme that will run on a PC. The fluid flow market is larger than the previous, and this package is good value in comparison with other software packages in Computational Fluid Dynamics, which are generally very expensive. The work in general copes with non-Newtonian laminar flow using the finite element method, and some basic theory of the subject is included in the opening chapters of the book.

Download or read book Finite Element Methods for Fluids written by Olivier Pironneau and published by . This book was released on 1989 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces the formulation of problems in fuild mechanics and dynamics, and shows how they can be analyzed and resolved using finite element methods. This practical book also discusses the equations of fluid mechanics and investigates the problems to which these equations can be applied, as well as how they can be analyzed and solved. Contains illustrations of computer simulations using the methods described in the book and features numerous illustrations.

Download or read book Fundamental Directions in Mathematical Fluid Mechanics written by Giovanni P. Galdi and published by Birkhäuser. This book was released on 2012-12-06 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume consists of six articles, each treating an important topic in the theory ofthe Navier-Stokes equations, at the research level. Some of the articles are mainly expository, putting together, in a unified setting, the results of recent research papers and conference lectures. Several other articles are devoted mainly to new results, but present them within a wider context and with a fuller exposition than is usual for journals. The plan to publish these articles as a book began with the lecture notes for the short courses of G.P. Galdi and R. Rannacher, given at the beginning of the International Workshop on Theoretical and Numerical Fluid Dynamics, held in Vancouver, Canada, July 27 to August 2, 1996. A renewed energy for this project came with the founding of the Journal of Mathematical Fluid Mechanics, by G.P. Galdi, J. Heywood, and R. Rannacher, in 1998. At that time it was decided that this volume should be published in association with the journal, and expanded to include articles by J. Heywood and W. Nagata, J. Heywood and M. Padula, and P. Gervasio, A. Quarteroni and F. Saleri. The original lecture notes were also revised and updated.